Pull SoC arm platform code updates from Arnd Bergmann:
"The updates here add code for the Microchip SAMA7D65 SoC, as well as
minor bugfixes for OMAP"
* tag 'soc-arm-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap1: Fix up the Retu IRQ on Nokia 770
ARM: omap2plus_defconfig: enable charger of TWL603X
ARM: at91: add new SoC sama7d65
ARM: at91: pm: change BU Power Switch to automatic mode
soc: atmel: fix device_node release in atmel_soc_device_init()
ARM: OMAP2+: Fix a typo
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
As stm32_defconfig is dedicated to STM32 MCUs, disable
CONFIG_COMMON_CLK_STM32MP flag which is only used by STM32 MPUs.
Disable CONFIG_SUSPEND, CONFIG_ADVISE_SYSCALLS, CONFIG_IO_URING
CONFIG_POSIX_TIMERS, CONFIG_GCC_PLUGINS, it will reduce the kernel
image size for these platforms which embed a low amount of memory.
Tested on STM32F746-DISCO board which embeds 8MB of memory.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241220125506.3157268-5-patrice.chotard@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Running make savedefconfig highlights some useless flags.
Since 54a48aa3d558 ("Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK")
flag ENABLE_MUST_CHECK has been removed.
Since 35260cf545 ("Kconfig.debug: fix SCHED_DEBUG dependency")
SCHED_DEBUG depends on DEBUG_KERNEL and PROC_FS.
As PROC_FS is not set, SCHED_DEBUG reference can be removed.
Since 7801104268 ("scsi: bsg: Move bsg_scsi_ops to drivers/scsi/")
BLK_DEV_BSG depends on SCSI. As SCSI is not set, BLK_DEV_BSG reference
can be removed.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241220125506.3157268-3-patrice.chotard@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove the vmac64 template, as it has no known users. It also continues
to have longstanding bugs such as alignment violations (see
https://lore.kernel.org/r/20241226134847.6690-1-evepolonium@gmail.com/).
This code was added in 2009 by commit f1939f7c56 ("crypto: vmac - New
hash algorithm for intel_txt support"). Based on the mention of
intel_txt support in the commit title, it seems it was added as a
prerequisite for the contemporaneous patch
"intel_txt: add s3 userspace memory integrity verification"
(https://lore.kernel.org/r/4ABF2B50.6070106@intel.com/). In the design
proposed by that patch, when an Intel Trusted Execution Technology (TXT)
enabled system resumed from suspend, the "tboot" trusted executable
launched the Linux kernel without verifying userspace memory, and then
the Linux kernel used VMAC to verify userspace memory.
However, that patch was never merged, as reviewers had objected to the
design. It was later reworked into commit 4bd96a7a81 ("x86, tboot:
Add support for S3 memory integrity protection") which made tboot verify
the memory instead. Thus the VMAC support in Linux was never used.
No in-tree user has appeared since then, other than potentially the
usual components that allow specifying arbitrary hash algorithms by
name, namely AF_ALG and dm-integrity. However there are no indications
that VMAC is being used with these components. Debian Code Search and
web searches for "vmac64" (the actual algorithm name) do not return any
results other than the kernel itself, suggesting that it does not appear
in any other code or documentation. Explicitly grepping the source code
of the usual suspects (libell, iwd, cryptsetup) finds no matches either.
Before 2018, the vmac code was also completely broken due to using a
hardcoded nonce and the wrong endianness for the MAC. It was then fixed
by commit ed331adab3 ("crypto: vmac - add nonced version with big
endian digest") and commit 0917b87312 ("crypto: vmac - remove insecure
version with hardcoded nonce"). These were intentionally breaking
changes that changed all the computed MAC values as well as the
algorithm name ("vmac" to "vmac64"). No complaints were ever received
about these breaking changes, strongly suggesting the absence of users.
The reason I had put some effort into fixing this code in 2018 is
because it was used by an out-of-tree driver. But if it is still needed
in that particular out-of-tree driver, the code can be carried in that
driver instead. There is no need to carry it upstream.
Cc: Atharva Tiwari <evepolonium@gmail.com>
Cc: Shane Wang <shane.wang@intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable SND_SOC_SPDIF in imx_v6_v7_defconfig to support SPDIF audio.
With commit d469b771af ("ARM: dts: imx6: update spdif sound card node
properties"), the more generic audio-codec property is used instead of
the old spdif-controller property. Since most i.MX6 boards now use the
audio-codec property together with the linux,spdif-dit and
linux,spdif-dir compatible driver, it makes sense to enable
SND_SOC_SPDIF in the imx_v6_v7_defconfig. This will ensure compatibility
with the updated device tree.
Without this change, boards that use the audio-codec property will show
the following error message during boot when using the
imx_v6_v7_defconfig and spdif audio is not working:
[ 24.165534] platform sound-spdif: deferred probe pending: fsl-asoc-card: snd_soc_register_card failed
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the arm CRC32 assembly code into the lib directory and wire it up
to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/arm/crypto/crc32-ce-glue.c to
arch/arm/lib/crc32-glue.c, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241202010844.144356-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Pull reiserfs removal from Jan Kara:
"The deprecation period of reiserfs is ending at the end of this year
so it is time to remove it"
* tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: The last commit
Deprecation period of reiserfs ends with the end of this year so it is
time to remove it from the kernel.
Acked-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Similarly to the ARM64 defconfig, enable debugging symbols and rely upon
the toolchain's default DWARF implementation.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
Renesas ARM defconfig updates for v6.12
- Enable support for AK4619 codecs and Renesas R-Car Ethernet-TSN
controllers in the ARM64 defconfig,
- Enable slab hardening and kmalloc buckets in the Renesas ARM
defconfig.
* tag 'renesas-arm-defconfig-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R-Car Ethernet-TSN support
ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
arm64: defconfig: Enable AK4619 codec support
Link: https://lore.kernel.org/r/cover.1724316480.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
Pull arm SoC platform updates from Arnd Bergmann:
"The majority of the updates here are Dmitry Torokhov's cleanups for
platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node
declarations.
The other updates are for the MAINTAINERS file, correcting some stale
or missing entries"
* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa: fix build breakage on PXA3xx
ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
MAINTAINERS: thead: add git tree
ARM: spitz: Use software nodes for the ADS7846 touchscreen
ARM: spitz: Use software nodes to describe LED GPIOs
ARM: spitz: Use software nodes to describe MMC GPIOs
ARM: spitz: Use software nodes to describe LCD GPIOs
ARM: spitz: Use software nodes to describe audio GPIOs
ARM: spitz: Use software nodes to describe SPI CS lines
ARM: spitz: Simplify instantiating SPI controller
ARM: pxa/gumstix: convert vbus gpio to use software nodes
ARM: pxa: consolidate GPIO chip platform data
ARM: spitz: fix GPIO assignment for backlight
ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
arm64: layerscape: remove redundant EDAC_SUPPORT selection
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
The imx-spdif machine driver creates audio card to directly use an
S/PDIF device. However, it doesn't support interacting with an ASRC.
fsl-asoc-card already has the support to create audio card which can
use the ASRC.
Merge the S/PDIF support from imx-spdif into driver fsl-asoc-card
to extend the support of S/PDIF audio card with the use of ASRC devices.
fsl-asoc-card uses slightly different DT properties than imx-spdif:
* the "spdif-controller" property from imx-spdif is named "audio-cpu" in
fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an SPDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
To keep backward compatibility, support for "spdif-controller",
"spdif-in" and "spdif-out" is also added to fsl-asoc-card.
However, it is recommended to use the new properties if possible.
It is better to declare transmitter and/or receiver in DT
than using the dummy codec.
DTs using compatible "fsl,imx-audio-spdif" are still compatible, and
fsl-asoc-card will behave the same as imx-spdif
for these DTs.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-5-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
Pull printk updates from Petr Mladek:
- Use no_printk() instead of "if (0) printk()" constructs to avoid
generating printk index for messages disabled at compile time
- Remove deprecated strncpy/strcpy from printk.c
- Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL
* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: cleanup deprecated uses of strncpy/strcpy
printk: Remove redundant CONFIG_BASE_FULL
printk: Change type of CONFIG_BASE_SMALL to bool
printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
ceph: Use no_printk() helper
dyndbg: Use *no_printk() helpers
dev_printk: Add and use dev_no_printk()
printk: Let no_printk() use _printk()
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')
For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
Renesas ARM defconfig updates for v6.10
- Enable support for the Renesas RZ/G2L display unit, DA9062 PMIC, and
RZ/V2H (R9A09G057) SoC in the ARM64 defconfig,
- Refresh shmobile_defconfig for v6.9-rc1.
* tag 'renesas-arm-defconfig-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v6.9-rc1
arm64: defconfig: Enable R9A09G057 SoC
arm64: defconfig: Enable Renesas DA9062 PMIC
arm64: defconfig: Enable Renesas RZ/G2L display unit DRM driver
Link: https://lore.kernel.org/r/cover.1712915530.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX defconfig changes for 6.10:
- Enable DW HDMI bridge driver for i.MX8M Plus SoC in arm64 defconfig
- Enable ONBOAD_USB_DEV driver in imx_v6_v7_defconfig to support USB2514
Hub found on imx6qdl-udoo board
* tag 'imx-defconfig-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Update ONBOARD_USB_HUB to ONBOAD_USB_DEV
ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB
arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
Link: https://lore.kernel.org/r/20240428121247.10370-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The onboard_usb_hub driver has been updated to support non-hub devices,
which has led to some renaming.
Update to the new name (ONBOARD_USB_DEV) accordingly.
Based on similar fixes done by Javier Carrasco for other defconfigs.
Fixes: 0bb36055c0 ("ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx6qdl-udoo board has a USB2514 Hub connected to the
USB Host1 port.
Select CONFIG_USB_ONBOARD_HUB so that USB hub can be functional.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
