Mediatek DRM Next for Linux 6.15
1. HDMI fixup and refinement
2. Move to devm_platform_ioremap_resource() usage
3. Add MT8188 dsc compatible
4. Fix config_updating flag never false when no mbox channel
5. dp: drm_err => dev_err in HPD path to avoid NULL ptr
6. Add dpi power-domains example
7. Add MT8365 SoC support
8. Fix error codes in mtk_dsi_host_transfer()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312232909.9304-1-chunkuang.hu@kernel.org
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Pull mtd fixes from Miquel Raynal:
"The two most important fixes in this list are probably the SST write
failure and the Qcom raw NAND controller probe failure which are due
to some refactoring, otherwise there has been a series of misc fixes
on the Cadence raw NAND controller driver and especially on the DMA
side"
* tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: cadence: fix unchecked dereference
mtd: spi-nor: sst: Fix SST write failure
dt-bindings: mtd: cadence: document required clock-names
mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec
mtd: rawnand: cadence: fix incorrect device in dma_unmap_single
mtd: rawnand: cadence: use dma_map_resource for sdma address
mtd: rawnand: cadence: fix error code in cadence_nand_init()
The clock-names property is required because the driver requests
the clock by name and not the index.
Update the example to use &clk instead of &nf_clk for the clocks
property to avoid confusion with the clock-names property "nf_clk".
Fixes: 1f05f823a1 (dt-bindings: mtd: cadence: convert cadence-nand-controller.txt to yaml)
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Fixes for the IOMMU used together with the PCIe controllers on rk3588,
some board-level fixes for wrong pins, pinctrl and regulators, and
disabling DMA on a board where the DMA+uart causes the dma controller to
hang, as well as improved network stability for the OrangePi R1.
* tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Link: https://lore.kernel.org/r/3004814.3ZeAukHxDK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull regulator fixes from Mark Brown:
"The main change here is a revert for a cleanup that was done in the
core, attempting to resolve some confusion about how we handle systems
where we've somehow managed to end up with both platform data and
device tree data for the same device. Unfortunately it turns out there
are actually a few systems that deliberately do this and were broken
by the change so we've just reverted it.
There's also a new Qualcomm device ID"
* tag 'regulator-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: let dt properties override driver init_data
regulator: qcom_smd: Add l2, l5 sub-node to mp5496 regulator
Jonathan writes:
IIO: 1st set of fixes for the 6.14 cycle
hid-sensors
- Fix an ABI issue that occurred when we gained multiple proximity sensor
support.
adi,adi-axi-adc
- Fix missing pwm-names inItems entry in dt binding.
adi,ad3552r
- Make sure to clear the reset bit in the status flag so future
resets can be detected.
adi,ad7192
- Fix use of value where it should be bit(value) to select channel.
adi,ad7606
- Fix up reporting of wrong available scales.
adi,admv8818
- Force SDO line to be initialized without relying on it already being
intialized to read back current register value.
atmel,sama5d2
- Fix wrong number of bits reported for readings from sama7g5
avago,apds9306
- Fix wrong scaling of scale values (missing a few zeros).
microchip,pac1921
- Fix resource leak by moving ACPI_FREE() call up a few lines.
tyhx,hx9023s
- Fix a use after free caused by releasing firmware a few lines early.
* tag 'iio-fixes-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: filter: admv8818: Force initialization of SDO
iio: adc: ad7606: fix wrong scale available
dt-bindings: iio: dac: adi-axi-adc: fix ad7606 pwm-names
iio: dac: ad3552r: clear reset status flag
iio: adc: ad7192: fix channel select
iio: hid-sensor-prox: Split difference from multiple channels
iio: proximity: Fix use-after-free in hx9023s_send_cfg()
iio: adc: at91-sama5d2_adc: fix sama7g5 realbits value
iio: adc: pac1921: Move ACPI_FREE() to cover all branches
iio: light: apds9306: fix max_scale_nano values
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Link: https://patch.msgid.link/20250207182957.23315C4CED1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm stepping down as ath10k, ath11k and ath12k maintainer so remove me from
MAINTAINERS file and Device Tree bindings. Jeff continues as the maintainer.
As my quicinc.com email will not work anymore so add an entry to .mailmap file
to direct the mail to my kernel.org address.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250203180445.1429640-1-kvalo@kernel.org
Pull irq fixes from Thomas Gleixner:
- Ensure ordering of memory and device I/O for IPIs on RISCV
The RISCV interrupt controllers use writel_relaxed() for generating
an IPI. That's a device I/O write which is not guaranteed to be
ordered against preceding memory writes. As a consequence a IPI
receiving CPU might not be able to observe the actual IPI data which
is required to handle it. Switch to writel() which contains the
necessary memory barriers to enforce ordering.
- Fix up the fallout of the MSI conversion in the MVEVBU ICU driver.
The conversion failed to handle the change of the data storage and
kept the original code which uses the domain::host_data pointer
unchanged. After the conversion domain::host_data points to the new
msi_domain_info structure and not longer to the MVEBU specific MSI
data, which is now stored in a member of msi_domain_info. This leads
to malfunction of the transalate() callback.
- Only handle the PMC in FIQ mode when it is configured that way.
The original check was incorrect as it did not explicitely check for
the proper conditions, which led to malfunctions of the PMU
interrupt.
- Improve Kconfig dependencies for the LAN966x Outband Interrupt
controller to avoid pointless pronmpts.
* tag 'irq-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Only handle PMC interrupt as FIQ when configured so
irqchip/irq-mvebu-icu: Fix access to msi_data from irq_domain::host_data
irqchip/riscv: Ensure ordering of memory writes and IPI writes
irqchip/lan966x-oic: Make CONFIG_LAN966X_OIC depend on CONFIG_MCHP_LAN966X_PCI
dt-bindings: interrupt-controller: microchip,lan966x-oic: Clarify endpoint use
