drm-misc-next for v7.3:
UAPI Changes:
- Remove the default udmabuf size limit of 64MB.
Cross-subsystem Changes:
- Add dmemcg support for eviction, and hook it up for amdgpu and xe.
Core Changes:
- Changes to TTM to be more aggressive when allocating below protection limit!
- Improve dt binding documentation for renesas.
- Add helper to convert physical address back to buddy block,
add that to and improve its kunit test.
Driver Changes:
- Assorted small fixes to ti-sn65dsi86, panthor, imagination, omapdrm,
bridge/synopsys, panel-edp, ssd130x, panel/tdo-tl070wsh30.
- Add Sharp LQ120P1JX51 panel.
- Add dmemcg support to nouveau.
- Various updates and improvements to sun4i, among which YUV and 4k support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/917d462a-8976-4a15-bec4-4513ec51c5c0@linux.intel.com
GFX6-8 are the oldest GPUs supported by the amdgpu
kernel driver, and the last ones that didn't support
DRM format modifiers until now. These are the Southern
Islands, Sea Islands and Volcanic Islands families
of GPUs.
On GFX6-8, the GFX block can only use pre-determined tiling
modes which are programmed by the kernel according to the
tiling mode table. GFX6 uses the GB_TILE_MODE0...31 registers,
and GFX7-8 also has GB_MACROTILE_MODE0...15 registers.
DCC is also supported on GFX8, albeit not displayable.
Note that the tiling table is uAPI and userspace relies on
specific modes being present at specific indices.
How the tiling works is primarily determined by the
so-called array mode.
Use the TILE field to specify the array mode.
Pixel data is organized into micro tiles.
Each micro tile may be 8x8 / 8x8x4 / 8x8x8 pixels,
depending on the array mode.
Add the MICROTILE field to specify microtile mode.
Microtiles may be further organized into macro tiles,
which have many configurable parameters. Macro tile mode
selection depends on how many bits per pixel an image has.
Add the PIPE_CONFIG, TILE_SPLIT, BANK_WIDTH, BANK_HEIGHT,
MACRO_TILE_ASPECT, NUM_BANKS fields to specify parameters
of macro tiled modes.
Furthermore, tiling is also influenced by memory
configuration. Old RFC patches received feedback
concerning that, so I looked into it specifically:
GB_ADDR_CONFIG.ROW_SIZE needs to be considered when
calculating TILE_SPLIT, but does not need to be included
in the modifiers, and also PIPE_INTERLEAVE matters,
but it's hardcoded to the same value on all GFX6-8 GPUs
and changing it would break userspace, so let's assume
it isn't going to change. Therefore we don't need to
include that in modifiers. Mesa also reads NUM_RANKS
but actually doesn't use its value on GFX6-8.
As a side note, tiling works similarly on GFX4-5
(that is Evergreen and Northern Islands). But that
will need some additional PIPE_CONFIG enum values
as well as some extra fields not relevant to GFX6-8.
Initially, let's only expose the tiling modes that are
most relevant to sharing buffers between different
processes:
Exposed array modes (TILE field):
- 1D_TILED_THIN1: micro tiled only
- 2D_TILED_THIN1: macro tiled
Exposed micro tile modes (MICROTILE field):
- DISPLAY: supported by DCE (the display engine)
- THIN: more efficient but not displayable
Exposed macro tile modes:
All possible parameters (25088 permutations).
More modes may be exposed in the future as needed.
Technically, the amount of possible combinations
of all possible tiling parameters is in the range
of hundreds of thousands, but in practice, there are
just a handful of possible modifiers for a surface.
For example on GFX8, a surface would have these
modifiers, from best to worst performance:
- 2D_TILED_THIN1 + THIN + DCC + macrotile params [1]
- 2D_TILED_THIN1 + THIN + macrotile params [1]
- 2D_TILED_THIN1 + DISPLAY + macrotile params [1]
- 1D_TILED_THIN1 + THIN
- 1D_TILED_THIN1 + DISPLAY
- LINEAR
[1] The macro tiling parameters depend on how many
bits per pixel of the specific surface has and
how the chip is configured. There is only one set
of valid macrotile params for a given surface.
DCC is only supported by GFX8 and newer, and only
with non-displayable macrotiling modes.
When sharing buffers between different GFX6-8 GPUs,
it is very unlikely that they support the exact same
macrotiling configuration, so they will likely need
to use micro tiled modes, which are still much better
than using linear buffers. (Note that currently Mesa
always uses LINEAR when copying between two GPUs.)
Suggested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Parse the Display Parameters Data Block (tag 0x21) defined in
DisplayID v2.1a Section 4.2.6. Extract the Display Device Technology
field from the color depth and device technology byte, which indicates
whether the panel uses LCD or OLED technology.
Add a panel_type field to struct drm_display_info and populate it
during DisplayID iteration so downstream drivers can use it for
panel-type-dependent behavior. Add DRM_MODE_PANEL_TYPE_LCD to the UAPI
panel type property alongside the existing OLED value.
Assisted-by: Copilot:Claude-Opus-4.6
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260526030254.1460480-3-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Parse the Display Parameters Data Block (tag 0x21) defined in
DisplayID v2.1a Section 4.2.6. Extract the Display Device Technology
field from the color depth and device technology byte, which indicates
whether the panel uses LCD or OLED technology.
Add a panel_type field to struct drm_display_info and populate it
during DisplayID iteration so downstream drivers can use it for
panel-type-dependent behavior. Add DRM_MODE_PANEL_TYPE_LCD to the UAPI
panel type property alongside the existing OLED value.
Assisted-by: Copilot:Claude-Opus-4.6
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow UM to bind sparsely populated memory regions by cyclically mapping
virtual ranges over a kernel-allocated dummy BO. This alternative is
preferable to the old method of handling sparseness in the UMD, because it
relied on the creation of a buffer object to the same end, despite the fact
Vulkan sparse resources don't need to be backed by a driver BO.
The choice of backing sparsely-bound regions with a Panthor BO was made so
as to profit from the existing shrinker reclaim code. That way no special
treatment must be given to the dummy sparse BOs when reclaiming memory, as
would be the case if we had chosen a raw kernel page implementation.
A new dummy BO is allocated per open file context, because even though the
Vulkan spec mandates that writes into sparsely bound regions must be
discarded, our implementation is still a workaround over the fact Mali CSF
GPUs cannot support this behaviour on the hardware level, so writes still
make it into the backing BO. If we had a global one, then it could be a
venue for information leaks between file contexts, which should never
happen in DRM.
As a side note, care was put to adjust dummy BO offsets for sparse mappings
so that all addresses in the new VA are mapped aligned against it.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260522185206.2798288-6-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
Changes for v7.2
Core:
- Fixed documentation for msm_gem_shrinker functions
- IFPC related enablement/fixes for gen8
- PERFCNTR_CONFIG ioctl support
GPU
- Reworked handling of UBWC configuration
- a810 suppport
MDSS:
- Added Milos platform support
- Reworked handling of UBWC configuration
DisplayPort:
- Reworked HPD handling, preparing for the MST support
DPU:
- Added Milos platform support
- Reworked handling of UBWC configuration
DSI:
- Added Milos platform support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00DXZcvFH2-C3fouve5DGs0DGa-vvsJPuaRmUZZVNKOfg@mail.gmail.com
The Arm Ethos-U NPUs have a PMU with performance counters. The PMU h/w
supports up to 4 (U65) or 8 (U85) counters which can be programmed for
different events. There is also a dedicated cycle counter.
The ABI and implementation are copied from the V3D driver. The main
difference in the ABI is there is no query API for the event list. The
events differ between the U65 and U85, so the events lists are
maintained in userspace along with other differences between the U65 and
U85.
The cycle counter is always enabled when the PMU is enabled. When the
user requests N events, reading the counters will return the N events
plus the cycle counter.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260601173814.250071-1-tomeu@tomeuvizoso.net
---
v2:
- Use XArray instead of idr
- Rework locking to use per device spinlock to protect modifying active
perfmon. Based on pending V3D changes:
https://lore.kernel.org/all/20260508-v3d-perfmon-lifetime-v1-1-f5b5642c085f@igalia.com/
- Add missing perfmon puts in ethosu_ioctl_perfmon_set_global() and
ethosu_ioctl_perfmon_get_values() error paths.
- Fix reading number of counters on U85.
- Add defines NPU_REG_PMCCNTR_CFG
v3:
- Add explicit padding to drm_ethosu_perfmon_destroy
- Fix SPDX license expression
- Fix comment typos
- Convert perfmon lock from spinlock to mutex
- Simplify switch_perfmon condition check
- Remove unused ethosu_perfmon_init
- Add lockdep_assert_held to ethosu_perfmon_stop_locked
v4:
- Use drmm_mutex_init() for perfmon lock
- Add lockdep_assert_held() to ethosu_perfmon_start()
- Fix a few style issues reported by Maíra
Add 2 struct member descriptions and convert #define macro constants
comments to kernel-doc comments to eliminate all kernel-doc warnings:
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'cmdbuf' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'target' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:780 This comment starts with '/**',
but isn't a kernel-doc comment.
* Specify that bit 39 of the patched-in address should be set to switch
Warning: include/uapi/drm/tegra_drm.h:832 This comment starts with '/**',
but isn't a kernel-doc comment.
* Execute `words` words of Host1x opcodes specified in the
`gather_data_ptr`
Warning: include/uapi/drm/tegra_drm.h:837 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Warning: include/uapi/drm/tegra_drm.h:842 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260427184454.693794-1-rdunlap@infradead.org
If userspace never maps GEM object, then BO wastes hostmem space
because VirtIO-GPU driver maps VRAM BO at the BO's creating time.
Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI
hinting flag telling that host mapping should be deferred until first
mapping is made when the flag is set by userspace.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Fix missing leading space before closing */ in
comment block
- Add DRM_IOCTL_XE_EXEC_QUEUE_SET_PROPERTY to the
IOCTL overview list
- Add missing query types to the device query doc list:
DRM_XE_DEVICE_QUERY_UC_FW_VERSION,
DRM_XE_DEVICE_QUERY_OA_UNITS,
DRM_XE_DEVICE_QUERY_EU_STALL
- Fix ioctl's -> ioctls (not possessive, 2 occurrences)
- Remove duplicate parameter docs from
drm_xe_mem_range_attr overview (already documented
as inline member comments)
- Fix extra whitespace before /** on 2 lines in
drm_xe_mem_range_attr
- Add missing blank line before DRM_XE_VM_BIND_FLAG_DECOMPRESS
bullet to fix RST block quote warning
v3: more fix (item 4 to 7).
Assisted-by: GitHub Copilot:claude-opus-4.6
Cc: Xin Wang <x.wang@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-7-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Fix incorrect field names and formatting in code examples:
- .num_bb_per_exec -> .width (renamed struct field
in exec_queue_create examples)
- .num_eng_per_bb -> .num_placements (renamed struct
field in exec_queue_create examples)
- .atomic_val -> .atomic.val (correct nested struct
field access in madvise example)
- Remove unnecessary backslash escaping in UUID format
string (%\08x -> %08x)
- Fix descriptive text trapped inside code-block in
exec_queue_create doc (split into two code blocks)
v3: one more fix of split code-block in exec_queue_create doc.
Assisted-by: GitHub Copilot:claude-opus-4.6
Cc: Xin Wang <x.wang@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-6-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Fix incorrect kernel-doc cross-reference markup syntax
throughout xe_drm.h:
- @struct_name -> &struct name for cross-references to other
structs (19 occurrences)
- struct @name -> &struct name where struct keyword was
mixed with @ syntax (8 occurrences)
- enum @name -> &enum name for cross-references to other
enums (5 occurrences)
- &CONSTANT / @CONSTANT -> %CONSTANT for defines and enum
values (15 occurrences)
- @field references to members of other structs -> plain text,
since @ only applies to the current struct's members
(9 occurrences)
Per kernel-doc conventions (Documentation/doc-guide/kernel-doc.rst):
- '&struct name' creates hyperlinks to struct definitions
- '&enum name' creates hyperlinks to enum definitions
- '%NAME' references constants and defines
- '@name' is only for parameters/members of the current context
Assisted-by: GitHub Copilot:claude-opus-4.6
Suggested-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-5-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Fix various grammar issues in doc comments:
- flag are only valid -> flag is only valid
- should only ever used -> should only ever be used
- if isn't already -> if it isn't already
- Type of the this -> Type of this
- When sync passed in -> When sync is passed in
- the users responsibility -> the user's responsibility
- must qword aligned -> must be qword aligned
- for a observation -> for an observation
- a memory ranges -> memory ranges
- for each memory ranges -> for each memory range.
- Second ioctl call -> second ioctl call
Assisted-by: GitHub Copilot:claude-opus-4.6
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-3-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Changes for v7.1
CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
Core:
- Switched to of_get_available_child_by_name()
DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
DP:
- Removed debug prints looking into PHY internals
DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- Couple a6xx gpu snapshot fixes
- Various other fixes
HDMI:
- Fixed infoframes programming
MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
Also misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV012vn73BaUfk=Hw4WkQHZNPHiqfifWEunAqMc2EGOWUEQ@mail.gmail.com
Hi Dave and Sima,
Here goes our late, final drm-xe-next PR towards 7.1. We just purgeable
BO uAPI in today, hence the late pull.
In the big things we have:
- Add support for purgeable buffer objects
Thanks,
Matt
UAPI Changes:
- Add support for purgeable buffer objects (Arvind, Himal)
Driver Changes:
- Remove useless comment (Maarten)
- Issue GGTT invalidation under lock in ggtt_node_remove (Brost, Fixes)
- Fix mismatched include guards in header files (Shuicheng)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/acX4fWxPkZrrfwnT@gsse-cloud1.jf.intel.com
Extend the DRM_XE_MADVISE ioctl to support purgeable buffer object
management by adding DRM_XE_VMA_ATTR_PURGEABLE_STATE attribute type.
This allows userspace applications to provide memory usage hints to
the kernel for better memory management under pressure:
- WILLNEED: Buffer is needed and should not be purged. If the BO was
previously purged, retained field returns 0 indicating backing store
was lost (once purged, always purged semantics matching i915).
- DONTNEED: Buffer is not currently needed and may be purged by the
kernel under memory pressure to free resources. Only applies to
non-shared BOs.
To prevent undefined behavior, the following operations are blocked
while a BO is in DONTNEED state:
- New mmap() operations return -EBUSY
- VM_BIND operations return -EBUSY
- New dma-buf exports return -EBUSY
- CPU page faults return SIGBUS
- GPU page faults fail with -EACCES
This ensures applications cannot use a BO while marked as DONTNEED,
preventing erratic behavior when the kernel purges the backing store.
The implementation includes a 'retained' output field (matching i915's
drm_i915_gem_madvise.retained) that indicates whether the BO's backing
store still exists (1) or has been purged (0).
Added DRM_XE_QUERY_CONFIG_FLAG_HAS_PURGING_SUPPORT flag to allow
userspace to detect kernel support for purgeable buffer objects
before attempting to use the feature.
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260326130843.3545241-2-arvind.yadav@intel.com
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260326151812.GA76082@linux.fritz.box
