Introduce a new test, `ipv4_devconf_notify`, to verify that the kernel
sends the appropriate netlink notifications when IPv4 devconf parameters
are modified.
The test depends on the newly introduced iproute2 command:
`ip link set dev <ifname> inet`
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260609204520.4670-3-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
... "phony", because its not testing offloads, it tests the control
plane code. Also test error unwind via fault injection framework.
For a proper test, real hardware would be required given we'd have
check if 'previously handed off to hardware' offload commands are
properly removed again on failure or rule flush.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260612092209.11966-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following 3 tests:
- _psp_dev_get_check_netkit_psp_assoc: verifies dev-get output in both
host and guest namespaces, checking assoc-list, by-association flag,
and nsid values
- _dev_assoc_no_nsid: tests dev-assoc and dev-disassoc without the nsid
attribute, verifying ifindex lookup in the caller's namespace
- _psp_dev_assoc_cleanup_on_netkit_del: verifies that deleting the
associated netkit interface properly cleans up the assoc-list, using
a disposable netkit pair to avoid disturbing the shared environment
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-11-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests that verify PSP notifications are delivered to listeners in
associated namespaces:
- _key_rotation_notify_multi_ns_netkit: triggers key rotation and
verifies the notification is received in both main and guest namespaces
- _dev_change_notify_multi_ns_netkit: triggers dev_set and verifies the
dev_change notification is received in both namespaces
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-10-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add _assoc_check_list() test that associates nk_guest with the PSP
device and verifies the assoc-list is correctly populated.
Add _data_basic_send_netkit_psp_assoc() which tests PSP data send
through a netkit interface associated with a PSP device. The test
associates nk_guest with the PSP device, then sends PSP-encrypted
traffic from the guest namespace.
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-9-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add infrastructure to support PSP tests across network namespaces
using NetDrvContEnv with netkit pairs. This enables testing PSP device
association, where a non-PSP-capable device (e.g. netkit) in a guest
namespace is associated with a real PSP device in the host namespace,
allowing the guest to perform PSP encryption/decryption through the
host's PSP hardware.
The topology is:
Host NS: psp_dev_local <---> nk_host
| |
| | (netkit pair)
| |
Remote NS: psp_dev_peer Guest NS: nk_guest
(responder) (PSP tests)
env.py:
- nk_guest_ifindex is queried after moving the device into the guest
namespace, so tests can use it directly for dev-assoc
psp.py:
- PSP device lookup supports container environments where the PSP
device is on the physical interface, not the test interface
- Association helpers handle dev-assoc/dev-disassoc with defer-based
cleanup to prevent state leaks on test assertion failures
- main() tries NetDrvContEnv with primary_rx_redirect and falls back
to NetDrvEpEnv, so existing tests continue to work without the
container environment
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-8-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename _nk_host_ifname to nk_host_ifname in NetDrvContEnv to make it
a public attribute, matching the nk_guest_ifname rename. Tests that
access the host-side netkit interface name (e.g. for cleanup after
deleting the netkit pair) no longer trigger pylint protected-access
warnings.
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-7-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add _find_bpf_obj() helper to NetDrvContEnv that searches the test
directory first, then falls back to the hw/ subdirectory. This allows
tests outside drivers/net/hw/ (e.g. psp.py in drivers/net/) to find
BPF objects built in the hw/ directory.
Update _attach_bpf() and _attach_primary_rx_redirect_bpf() to use
_find_bpf_obj() for BPF object discovery.
Signed-off-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260608233118.2694144-6-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that both address families respect the oif parameter when a
matching multipath route is found, regardless of the presence of a
source address.
Output without "ipv6: Select best matching nexthop object in
fib6_table_lookup()" and "ipv6: Honor oif when choosing nexthop for
locally generated traffic":
# ./fib_tests.sh -t "ipv4_mpath_oif ipv4_mpath_oif_nh ipv4_mpath_oif_vrf ipv6_mpath_oif ipv6_mpath_oif_nh ipv6_mpath_oif_vrf"
IPv4 multipath oif test
TEST: IPv4 multipath via first nexthop [ OK ]
TEST: IPv4 multipath via second nexthop [ OK ]
TEST: IPv4 multipath via first nexthop with source address [ OK ]
TEST: IPv4 multipath via second nexthop with source address [ OK ]
IPv4 multipath oif with nexthop object test
TEST: IPv4 multipath via first nexthop [ OK ]
TEST: IPv4 multipath via second nexthop [ OK ]
TEST: IPv4 multipath via first nexthop with source address [ OK ]
TEST: IPv4 multipath via second nexthop with source address [ OK ]
IPv4 multipath oif with VRF test
TEST: IPv4 multipath via first nexthop [ OK ]
TEST: IPv4 multipath via second nexthop [ OK ]
TEST: IPv4 multipath via first nexthop with source address [ OK ]
TEST: IPv4 multipath via second nexthop with source address [ OK ]
IPv6 multipath oif test
TEST: IPv6 multipath via first nexthop [ OK ]
TEST: IPv6 multipath via second nexthop [ OK ]
TEST: IPv6 multipath via first nexthop with source address [FAIL]
TEST: IPv6 multipath via second nexthop with source address [FAIL]
IPv6 multipath oif with nexthop object test
TEST: IPv6 multipath via first nexthop [FAIL]
TEST: IPv6 multipath via second nexthop [FAIL]
TEST: IPv6 multipath via first nexthop with source address [FAIL]
TEST: IPv6 multipath via second nexthop with source address [FAIL]
IPv6 multipath oif with VRF test
TEST: IPv6 multipath via first nexthop [ OK ]
TEST: IPv6 multipath via second nexthop [ OK ]
TEST: IPv6 multipath via first nexthop with source address [FAIL]
TEST: IPv6 multipath via second nexthop with source address [FAIL]
Tests passed: 16
Tests failed: 8
Output with the patches:
# ./fib_tests.sh -t "ipv4_mpath_oif ipv4_mpath_oif_nh ipv4_mpath_oif_vrf ipv6_mpath_oif ipv6_mpath_oif_nh ipv6_mpath_oif_vrf"
IPv4 multipath oif test
TEST: IPv4 multipath via first nexthop [ OK ]
TEST: IPv4 multipath via second nexthop [ OK ]
TEST: IPv4 multipath via first nexthop with source address [ OK ]
TEST: IPv4 multipath via second nexthop with source address [ OK ]
IPv4 multipath oif with nexthop object test
TEST: IPv4 multipath via first nexthop [ OK ]
TEST: IPv4 multipath via second nexthop [ OK ]
TEST: IPv4 multipath via first nexthop with source address [ OK ]
TEST: IPv4 multipath via second nexthop with source address [ OK ]
IPv4 multipath oif with VRF test
TEST: IPv4 multipath via first nexthop [ OK ]
TEST: IPv4 multipath via second nexthop [ OK ]
TEST: IPv4 multipath via first nexthop with source address [ OK ]
TEST: IPv4 multipath via second nexthop with source address [ OK ]
IPv6 multipath oif test
TEST: IPv6 multipath via first nexthop [ OK ]
TEST: IPv6 multipath via second nexthop [ OK ]
TEST: IPv6 multipath via first nexthop with source address [ OK ]
TEST: IPv6 multipath via second nexthop with source address [ OK ]
IPv6 multipath oif with nexthop object test
TEST: IPv6 multipath via first nexthop [ OK ]
TEST: IPv6 multipath via second nexthop [ OK ]
TEST: IPv6 multipath via first nexthop with source address [ OK ]
TEST: IPv6 multipath via second nexthop with source address [ OK ]
IPv6 multipath oif with VRF test
TEST: IPv6 multipath via first nexthop [ OK ]
TEST: IPv6 multipath via second nexthop [ OK ]
TEST: IPv6 multipath via first nexthop with source address [ OK ]
TEST: IPv6 multipath via second nexthop with source address [ OK ]
Tests passed: 24
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260611154605.992528-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The server binds the queues for zero-copy after listen(). If the client
does a connect() during this time it can fail with EHOSTUNREACH on
a cold system. This was encountered with the mlx5 driver where binding
the .ndo_queue_start() is a slow operation during which no packets
can be exchanged.
This change moves listen() after queue binding, when the test server is
fully operational.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Link: https://patch.msgid.link/20260611160341.3697227-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UMEM teardown currently recomputes the munmap() length from frame
geometry, shared-UMEM adjustment, and hugepage rounding. This duplicates
setup-time logic in cleanup and relies on re-deriving the mapping size
instead of using the size originally established for the mapping.
Store the final mapping length in xsk_umem_info as mmap_size when the
UMEM mapping is created, and use that value during teardown.
Also join the RX worker thread before cleanup in the single-thread
path. This establishes synchronization before reading umem->mmap_size
in teardown and avoids a potential visibility race.
This removes duplicated size arithmetic in cleanup and makes munmap()
use the canonical mapping size recorded at setup time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-5-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move UMEM ownership from ifobject to xsk_socket_info and access it
through xsk->umem.
Allocate one shared umem_real in ifobject_create() and let all
sockets reference it through xsk->umem, while keeping ownership in
xsk_arr[0]. Keep the existing goto-based error path in
ifobject_create() and free the allocation once in ifobject_delete().
Reset the existing umem_real in __test_spec_init() with memset()
instead of reallocating it.
Preserve shared-UMEM behavior by copying RX UMEM state into a TX-local
UMEM state in thread_common_ops_tx() and reset base_addr/next_buffer
before TX socket configuration.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-3-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a tdc test that checks the act_pedit extended L4 header mode does not
edit a packet whose IPv4 protocol does not match the selected transport
header.
The test installs an ingress pedit rule that sets the UDP destination
port, then injects a TCP packet with dport 2222. The UDP and TCP
destination ports sit at the same L4 offset, so a buggy kernel rewrites
the TCP dport. A second flower filter matches TCP dport 2222 and drops
the packet through an indexed gact action; the test then verifies via
JSON that this action saw exactly one packet, i.e. the dport was left
untouched and still matched 2222.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mod_flow() and the mod-flow CLI command to ovs-dpctl.py, exercising
OVS_FLOW_CMD_SET. Add test_flow_set which first modifies an existing
flow with new actions and verifies the change via traffic, then modifies
the same flow without actions and verifies the kernel handles the
no-actions case gracefully.
The no-actions path is unreachable from userspace OVS tools (dpctl
mod-flow requires actions) but reachable via raw netlink. This is the
code path where Adrian Moreno found a possible kfree_skb of ERR_PTR
when reply allocation fails after locking.
Make parse() skip OVS_FLOW_ATTR_ACTIONS when actstr is None so the
kernel enters the post-lock allocation branch in ovs_flow_cmd_set().
After the no-actions set, verify via dump-flows that the flow retained
its drop action.
Suggested-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260609165725.107484-1-houminxi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, they were only checked on demand, but it seems better to check
them each time received ADD_ADDRs are checked.
Errors are only reported when the counter exists, and the value is not
the expected one. This is similar to what is done in chk_join_nr: it
reduces the output, and avoids a lot of 'skip' when validating older
kernels. Also here, some tests need to adapt the default expected
counters, e.g. when ADD_ADDR echo are dropped on the reception side, or
it is not possible to send an ADD_ADDR due to the limited option space.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-8-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the feature added by parent commit, where it is now
possible to send an ADD_ADDR with a v6 IP address and a port number,
while the connection is using TCP Timestamps.
This test is simply a copy of the previous one: "signal address with
port", but using IPv6 addresses. This test is only executed if the
add_addr_v6_port_drop_ts sysctl knob is available. If not, it means the
kernel doesn't support this feature.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-7-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This sysctl is going to be used in the next commits to drop TCP
timestamps option, to be able to send an ADD_ADDR with a v6 IP address
and a port number. It is enabled by default.
This knob is explicitly disabled in the MPTCP Join selftest, with the
"signal addr list progresses after tx drop" subtest, to continue
verifying the previous behaviour where the ADD_ADDR is not sent due to a
lack of space.
While at it, move syn_retrans_before_tcp_fallback down from struct
mptcp_pernet, to avoid creating another 3 bytes hole.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-4-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e ("net: txgbe: rework service event handling")
57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b7 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a kselftest that exercises the RDS getsockopt() paths converted to
the getsockopt_iter() / sockopt_t callback:
- RDS_RECVERR and SO_RDS_TRANSPORT, which return their int value through
copy_to_iter() and report the written length in opt->optlen.
- RDS_INFO_*, which obtains the userspace buffer pages with
iov_iter_extract_pages() (including a non-zero starting page offset)
and lets the info producers copy the snapshot in under a spinlock.
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-getsock_more-v3-1-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test needs more work, and it fails in non-obvious way
when IPv4 connectivity is not available:
# Exception| CMD[remote]: /tmp/vjquwblf/gukinuzqso_txtime -4 -c mono -t 1780939014114542914 -S None -D None a,0 -r
# Exception| EXIT: -15
Explicitly check for IPv4 support to make the future triage
less painful.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609180803.1093428-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test seems to be written with a single-host loopback
in mind. We need to deploy the binary to remote before
we run it. This is just fixing an obvious issue, but
more work will be needed to make the dual-host setup
work reliably. Most of the runs still fail with:
FAIL: start time already passed
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609180803.1093428-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull RISC-V fixes from Paul Walmsley:
- Fix the implementation of the CFI branch landing pad control prctl()s
to return -EINVAL if unknown control bits are set, rather than
silently ignoring the request; and add a kselftest for this case
- Fix unaligned access performance testing to happen earlier in boot,
which fixes a performance regression in the lib/checksum code
- Fix a binfmt_elf warning when dumping core (due to missing
.core_note_name for CFI registers)
* tag 'riscv-for-linux-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: cfi: reject unknown flags in PR_SET_CFI
riscv: Fix fast_unaligned_access_speed_key not getting initialized
riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI
The generated binary for getsockopt_iter.c shouldn't show up as an
untracked git file after running:
make -C tools/testing/selftests TARGETS=net install
Let's just ignore it.
Fixes: d39887f55d ("net: selftests: add getsockopt_iter regression tests")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260608112259.4022-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ip-link output is unavailable, when the upcall daemon log has not
been written yet, or when pahole does not know the OVS drop subsystem
ID, the affected command substitutions silently produce empty strings.
The caller then passes empty sha= or pid= arguments to ovs_add_flow,
or matches against wrong drop reason codes, all without a diagnostic.
Add [ -z ] guards immediately after each assignment. For test_arp_ping,
also align the MAC extraction to use awk '/link\/ether/' as in
test_pop_vlan. The drop_reason guard returns ksft_skip because an
absent subsystem ID is an environment issue, not a test failure.
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260604163016.3929371-1-houminxi@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GRO test is very timing-sensitive, packets may be delayed
by the network or just sent slowly. Because of this we retry
each test case up to 6 times.
This makes perfect sense for positive cases, in which we want
to see coalescing. Negative test cases, which modify headers
and expect no coalescing should have opposite treatment.
We should really try 6 times and make sure that each time
the test failed. This would, however, require that we annotate
each test to indicate whether its positive or negative.
Let's start with a simpler improvement. Do not allow
retries if we detected over-coalescing. Previously the negative
case would have to get lucky at least once in 6 tries to pass.
Now the first failure breaks the retry loop.
For background - NICs tend to ignore the contents of the TCP
timestamp option, so that test case commonly fails. In NIPA
having 6 attempts, however, was enough for some NICs to get
multiple successful runs in a row, getting the test cases
auto-classified as expected to pass, even tho the NIC does
not comply with the expectations.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607002401.212976-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
prctl(PR_SET_CFI,PR_CFI_BRANCH_LANDING_PADS) silently ignored
unknown control values. Only PR_CFI_{ENABLE,DISABLE,LOCK} should
be permitted.
This changes the behavior of the uABI (fails previously accepted bits
with EINVAL).
Fixes: 08ee155905 ("prctl: cfi: change the branch landing pad prctl()s to be more descriptive")
Signed-off-by: Richard Patel <ripatel@wii.dev>
Link: https://patch.msgid.link/20260518183918.322545-1-ripatel@wii.dev
[pjw@kernel.org: change the patch description to note that although this is a uABI change, it does not break the uABI]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull vfs fixes from Christian Brauner:
- Fix error handling in ovl_cache_get()
- Tighten access checks for exited tasks in pidfd_getfd()
- Fix selftests leak in __wait_for_test()
- Limit FUSE_NOTIFY_RETRIEVE to uptodate folios
- Reject fuse_notify() pagecache ops on directories
- Clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
- Fix failure to unlock in nfsd4_create_file()
- Fix pointer arithmetic in qnx6 directory iteration
- Fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
- Avoid potential null folio->mapping deref during iomap error
reporting
* tag 'vfs-7.1-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: avoid potential null folio->mapping deref during error reporting
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
fs/qnx6: fix pointer arithmetic in directory iteration
VFS: fix possible failure to unlock in nfsd4_create_file()
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
fuse: reject fuse_notify() pagecache ops on directories
fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios
selftests: harness: fix pidfd leak in __wait_for_test
pidfd: refuse access to tasks that have started exiting harder
ovl: keep err zero after successful ovl_cache_get()
Add userns_devmem.py, which mirrors nk_devmem.py but places the netkit
guest in a netns whose owning user_ns is non-init. ncdevmem is ran there
via nsenter so the bind-rx call is issued with creds that hold
CAP_NET_ADMIN only in the child user_ns.
Without the preceding GENL_UNS_ADMIN_PERM patch the test fails at
bind-rx with EPERM, but with the patch the transfer completes and tests
pass.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260602-nl-prov-v2-2-ad721142c641@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, pppd attempts to detect loopbacks on the underlying
interface using a pseudo-randomly generated magic number and checks if
the same value is received. The seed for the PRNG is a hash of hostname
XOR current time XOR pid, which is likely to collide on NIPA, causing
false positives. Disable magic number generation.
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Fixes: 7af2a94f4d ("selftests: net: add tests for PPPoL2TP")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260603061746.23452-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull tracing/probes fix from Masami Hiramatsu:
"Fix the eprobe event parser to point error position correctly"
* tag 'probes-fixes-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Point the error offset correctly for eprobe argument error
Make the RDMA test return XFAIL rather than skip when RXE is not
available, since the RDMA datapath is not run in netdev CI.
Change the three RDMA-prerequisite checks in check_rdma_conf() and
check_rdma_conf_enabled() to exit with KSFT_XFAIL (2) and tag their
messages [XFAIL] instead of [SKIP].
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260602050657.26389-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 92cc6708f4 ("selftests: rds: config: disable modules") set
CONFIG_MODULES=n since run.sh required this kconfig. But disabling
modules also forces every =m option to =n rather than =y, which can
silently drop unrelated features.
This patch removes CONFIG_MODULES=n from the rds selftest config and
updates the check_*conf_enabled() routines to accept a config as
either built-in (=y) or modular (=m). A new probe_module() function
is added to load the backing module when a component is set to be
modular (=m). config.sh no longer forces CONFIG_MODULES=n, so a user
who follows the SKIP message to run config.sh does not silently end
up with modules disabled again.
rds.ko itself is auto-loaded on socket creation, and rds_rdma.ko is
auto-loaded when SO_RDS_TRANSPORT is set with RDS_TRANS_IB, but the
TCP transport (rds_tcp.ko) is not auto-loaded on the bind path, so
the backing modules are loaded explicitly here.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260602050657.26389-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RDS selftests create AF_RDS sockets but never selects a transport,
so the transport is chosen implicitly based on network topology when
the socket is bound. If underlying connection establishment fails, RDS
can fall back to another transport (e.g. loopback) and the test still
passes, silently bypassing the intended datapath it is meant to
exercise.
Set SO_RDS_TRANSPORT to the proper RDS_TRANS_IB or RDS_TRANS_TCP before
they are bound, so the test fails loudly if the intended transport is
unavailable rather than passing on a different path.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260602050657.26389-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
Add a selftest for VXLAN vnifilter netlink notifications that verifies
RTM_NEWTUNNEL and RTM_DELTUNNEL are sent correctly when VNIs are added,
deleted, or updated, and that no spurious notifications are sent when
a VNI is re-added with the same attributes.
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test to verify that when a skb is partially consumed,
unix_inq_len() return correct remaining byte count.
Before:
# RUN scm_inq.stream.partial_read ...
# scm_inq.c:165:partial_read:Expected remain (512) == *(int *)CMSG_DATA(cmsg) (768)
# partial_read: Test terminated by assertion
# FAIL scm_inq.stream.partial_read
not ok 2 scm_inq.stream.partial_read
After:
# RUN scm_inq.stream.partial_read ...
# OK scm_inq.stream.partial_read
ok 2 scm_inq.stream.partial_read
Signed-off-by: Jianyu Li <jianyu.li@mediatek.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260601113640.231897-3-jianyu.li@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull cgroup fixes from Tejun Heo:
"One cpuset fix and a maintenance update, both low-risk:
- Fix cpuset partition CPU accounting under sibling CPU exclusion
that could produce wrong CPU assignments and trigger
scheduling-domain warnings. Includes selftests.
- Update an email address in MAINTAINERS"
* tag 'cgroup-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Change Ridong's email
cgroup/cpuset: Add test cases for sibling CPU exclusion on partition update
cgroup/cpuset: Use effective_xcpus in partcmd_update add/del mask calculation
The getaddrinfo() call in bind_socket() dynamically allocates memory
for the result linked list that must be freed with freeaddrinfo().
However, none of the code paths after a successful getaddrinfo() call
free this memory, causing a leak in every invocation of bind_socket().
Signed-off-by: longlong yan <yanlonglong@kylinos.cn>
Link: https://patch.msgid.link/20260601013927.1835-1-yanlonglong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add dec_ttl action support to the OVS kernel datapath selftest
framework:
- Add dec_ttl nested NLA class to ovs-dpctl.py with proper
OVS_DEC_TTL_ATTR_ACTION sub-attribute handling
- Add parse support for dec_ttl(le_1(<inner_actions>)) action
string, consistent with the odp-util.c format where le_1()
holds the actions taken when TTL reaches 1
- Add dpstr output formatting for dec_ttl actions
- Add test_dec_ttl() to openvswitch.sh that verifies:
* Normal TTL packets are forwarded after decrement
* TTL=1 packets are dropped (TTL expiry)
* Graceful skip via ksft_skip if kernel lacks dec_ttl support
The dec_ttl class uses late-binding type resolution to reference
ovsactions for its inner action list, avoiding circular references
at class definition time.
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260530021443.1734484-1-houminxi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
