Currently, IPv4 routes are flushed in ->exit_batch() after
all devices are unregistered.
Unlike IPv6, IPv4 routes are not added from the fast path,
so we can flush routes before default_device_exit_batch().
Let's call ip_fib_net_exit() from ->exit_rtnl() to save
one RTNL locking dance.
ip_fib_net_exit() must use list_del_rcu() for fib_table
for the fast path on dying dev.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260612063225.455191-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will call ip_fib_net_exit() from ->exit_rtnl().
All fib_table will be destroyed before devices are unregistered.
During device unregistration, inetdev_destroy() could call
fib_del_ifaddr(), which calls fib_magic(RTM_DELROUTE).
fib_magic() calls fib_new_table(), but we do not want to create
a new table after ip_fib_net_exit() destroys all tables.
As a prep, let's add check_net() before fib_trie_table() in
fib_new_table().
fib_trie_table() is also called from fib_trie_unmerge(), but
fib_get_table() fails first in fib_unmerge(), so the same
problem does not occur there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260612063225.455191-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will call ip_fib_net_exit() from ->exit_rtnl().
However, some paths will still access net->ipv4.fib_table_hash
after ->exit_rtnl().
For example, fib_flush() is called from fib_disable_ip() for
NETDEV_UNREGISTER.
Let's move kfree(net->ipv4.fib_table_hash) and fib4_notifier_exit()
from ip_fib_net_exit() to its caller.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260612063225.455191-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will call ip_fib_net_exit() from ->exit_rtnl().
Since the exit callbacks are called in the following order,
1. ->pre_exit()
~~~ synchronize_rcu() ~~~
2. ->exit_rtnl() : ip_fib_net_exit()
3. ->exit() : fib_proc_exit() / nl_fib_lookup_exit()
4. ->exit_batch() : fib4_semantics_exit()
the reverse order of fib_net_init() would get messed up.
Let's move fib_proc_exit() and nl_fib_lookup_exit() to ->pre_exit().
This is fine because procfs/netlink access from userspace cannot
occur at this point and synchronize_rcu() is not needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260612063225.455191-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even when fib_table_flush() is called with flush_all true, it does
not flush all fib_info due to this condition:
!(fi->fib_flags & RTNH_F_DEAD) && !fib_props[fa->fa_type].error)
This creates an implicit ordering between default_device_exit_batch()
and fib_net_exit_batch().
fib_table_flush(flush_all=true) must be called after all devices
are NETDEV_UNREGISTERed, which is after nexthop_flush_dev() marks
RTNH_F_DEAD.
This would cause memory leak if the order were reversed.
fib_table_flush() does not skip non-dead error routes when flush_all
is true:
!flush_all &&
!(fi->fib_flags & RTNH_F_DEAD) && fib_props[fa->fa_type].error
Let's merge the two conditions not to skip all non-dead fib_info
during netns dismantle.
Note that we could further apply !flush_all to the basic table
id check and the rtmsg_fib() call in the loop.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260612063225.455191-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to commit add641e7de ("sched: act_csum: don't mangle TCP and
UDP GSO packets"), UDP tunnel GSO packets going through act_csum
shouldn't have their checksum calculated at this point, because it will
be done after segmentation. Setting the checksum in act_csum modifies
skb->ip_summed and prevents inner IP csum offload from kicking in,
resulting in a packet with a bad checksum.
Add UDP tunnel GSO packets to the exceptions, and also add UDP GSO
(SKB_GSO_UDP_L4), as the same logic as in the commit mentioned above
applies to UDP GSO too.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260611192955.604661-2-alice.kernel@fastmail.im
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Devlink param value attribute is not defined since devlink is handling
the value validating and parsing internally, this allows us to implement
multi attribute values without breaking any policies.
Devlink param multi-attribute values are considered to be dynamically
sized arrays of u64 values, by introducing a new devlink param type
DEVLINK_PARAM_TYPE_U64_ARRAY, driver and user space can set a variable
count of u64 values into the DEVLINK_ATTR_PARAM_VALUE_DATA attribute.
Implement get/set parsing and add to the internal value structure passed
to drivers.
This is useful for devices that need to configure a list of values for
a specific configuration.
example:
$ devlink dev param show pci/... name multi-value-param
name multi-value-param type driver-specific
values:
cmode permanent value: 0,1,2,3,4,5,6,7
$ devlink dev param set pci/... name multi-value-param \
value 4,5,6,7,0,1,2,3 cmode permanent
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-5-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink_nl_param_fill() kept two per-configuration-mode copies of
union devlink_param_value plus a struct devlink_param_gset_ctx on the
stack while building the Netlink reply. Allocate those with kcalloc()
and kzalloc_obj() instead, and route failures through a single cleanup
path so temporary buffers are always freed.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When IPv4 device configuration parameters are updated via netlink, the
kernel currently only updates the value. This bypasses several
post-modification actions that occur when these same parameters are
updated via sysctl, such as flushing the routing cache or emitting
RTM_NEWNETCONF notifications.
This patch addresses the inconsistency by calling the
devinet_conf_post_set() helper inside inet_set_link_af(). If a flush is
required, we defer it until the netlink attribute parsing loop
completes.
This ensures consistent behavior and side-effects for devconf changes,
regardless of whether they are initiated via sysctl or netlink.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260609204520.4670-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The logic for handling IPv4 devconf sysctls is scattered. Notification
and cache flushes are managed in devinet_conf_proc(), while a separate
ipv4_doint_and_flush() function and DEVINET_SYSCTL_FLUSHING_ENTRY macro
is used for properties that solely require a cache flush.
This patch refactors the sysctl handling by introducing a centralized
helper, devinet_conf_post_set(). This new function evaluates the changed
attribute and handles all necessary operations like triggering netlink
notifications. It returns a boolean indicating whether a routing cache
flush is required.
Note that the boolean is necessary as this function will be re-used for
netlink IPv4 devconf handling where the cache flushing must wait until
all the attributes have been processed.
Finally, this is introducing a small change in behavior for
IPV4_DEVCONF_ROUTE_LOCALNET. As commit d0daebc3d6 ("ipv4: Add
interface option to enable routing of 127.0.0.0/8") intended, the cache
flush should only be performed when ROUTE_LOCALNET changes from 1 to 0.
Unfortunately, this was not true because while implementing it the
DEVINET_SYSCTL_FLUSHING_ENTRY was used for the attribute, making the
code related to it on devinet_conf_proc() dead.
IPV4_DEVCONF_FORWARDING is still being handled separately as it requires
more operations.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260609204520.4670-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0e24d17bd9 ("tcp: implement RFC 7323 window retraction
receiver requirements") removed the special FIN case that
was added in commit 1e3bb184e9 ("tcp: re-enable acceptance of
FIN packets when RWIN is 0").
If a peer sends a segment containing data and a FIN flag before
it learns about our window retraction and has a buggy TCP stack,
it might place the FIN one byte beyond what it thinks is the
right edge of the window (i.e., max_window_edge + 1).
The data portion (end_seq - th->fin) will end exactly at max_window_edge.
In this case, we will drop the packet if our receive queue is not empty,
even though the data was sent within the window we previously allowed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260608151452.706822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-06-12
1) Replace the open-coded manual cleanup in xfrm_add_policy() error
path with xfrm_policy_destroy() for consistency with
xfrm_policy_construct().
From Deepanshu Kartikey.
2) Limit XFRMA_TFCPAD to a sensible maximum (max IP length, 64k) since
u32 is excessive for traffic flow confidentiality padding.
From David Ahern.
3) Add a new netlink message XFRM_MSG_MIGRATE_STATE that
allows migrating individual IPsec SAs independently of
their policies. The existing XFRM_MSG_MIGRATE is tightly coupled
to policy+SA migration, lacks SPI for unique SA identification,
and cannot express reqid changes or migrate Transport mode
selectors. The new interface identifies the SA via SPI and mark,
supports reqid changes, address family changes, encap removal,
and uses an atomic create+install flow under x->lock to prevent
SN/IV reuse during AEAD SA migration.
From Antony Antony.
* tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add documentation for XFRM_MSG_MIGRATE_STATE
xfrm: restrict netlink attributes for XFRM_MSG_MIGRATE_STATE
xfrm: add XFRM_MSG_MIGRATE_STATE for single SA migration
xfrm: make xfrm_dev_state_add xuo parameter const
xfrm: extract address family and selector validation helpers
xfrm: refactor XFRMA_MTIMER_THRESH validation into a helper
xfrm: move encap and xuo into struct xfrm_migrate
xfrm: add error messages to state migration
xfrm: add state synchronization after migration
xfrm: check family before comparing addresses in migrate
xfrm: split xfrm_state_migrate into create and install functions
xfrm: rename reqid in xfrm_migrate
xfrm: fix NAT-related field inheritance in SA migration
xfrm: allow migration from UDP encapsulated to non-encapsulated ESP
xfrm: add extack to xfrm_init_state
xfrm: remove redundant assignments
xfrm: Reject excessive values for XFRMA_TFCPAD
xfrm: cleanup error path in xfrm_add_policy()
====================
Link: https://patch.msgid.link/20260612074725.1760473-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add vsock_pending_to_accept() to move a socket directly from the
pending list to the accept queue in a single operation, avoiding
the sock_put/sock_hold dance and the sk_acceptq_removed()/
sk_acceptq_added() pair that would otherwise be needed when
calling vsock_remove_pending() followed by vsock_enqueue_accept().
Use it in vmci_transport_recv_connecting_server() where a completed
handshake transitions the socket from pending to accept queue.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260612045216.105796-2-rafdog35@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main purpose of this cmd is to be able to associate a
non-psp-capable device (e.g. veth or netkit) with a psp device.
One use case is if we create a pair of veth/netkit, and assign 1 end
inside a netns, while leaving the other end within the default netns,
with a real PSP device, e.g. netdevsim or a physical PSP-capable NIC.
With this command, we could associate the veth/netkit inside the netns
with PSP device, so the virtual device could act as PSP-capable device
to initiate PSP connections, and performs PSP encryption/decryption on
the real PSP device.
Signed-off-by: Wei Wang <weibunny@fb.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260608233118.2694144-3-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce 2 versions of psp_device_get_locked:
1. psp_device_get_locked_admin(): This version is used for operations
that would change the status of the psd, and are currently used for
dev-set and key-rotation.
2. psp_device_get_locked(): This is the non-admin version, which are
used for broader user issued operations including: dev-get, rx-assoc,
tx-assoc, get-stats.
Following commit will be implementing both of the checks.
Signed-off-by: Wei Wang <weibunny@fb.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260608233118.2694144-2-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 741a11d9e4 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is
set") made the kernel honor the oif parameter when specified as part of
output route lookup:
# ip route add 2001:db8:1::/64 dev dummy1
# ip route add ::/0 dev dummy2
# ip route get 2001:db8:1::1 oif dummy2 fibmatch
default dev dummy2 metric 1024 pref medium
Due to regression reports, the behavior was partially reverted in commit
d46a9d678e ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr
set") to only honor the oif if source address is not specified:
# ip route get 2001:db8:1::1 from 2001:db8:2::1 oif dummy2 fibmatch
2001:db8:1::/64 dev dummy1 metric 1024 pref medium
That is, when source address is specified, the kernel will choose the
most specific route even if its nexthop device does not match the
specified oif.
This creates a problem for multipath routes. After looking up a route,
when source address is not specified, the kernel will choose a nexthop
whose nexthop device matches the specified oif:
# sysctl -wq net.ipv6.conf.all.forwarding=1
# ip route add 2001:db8:10::/64 nexthop via fe80::1 dev dummy1 nexthop via fe80::2 dev dummy2
# for i in {1..100}; do ip route get 2001:db8:10::${i} oif dummy2; done | grep -o dummy[0-9] | sort | uniq -c
100 dummy2
But will disregard the oif when source address is specified despite the
fact that a matching nexthop exists:
# for i in {1..100}; do ip route get 2001:db8:10::${i} from 2001:db8:2::1 oif dummy2; done | grep -o dummy[0-9] | sort | uniq -c
53 dummy1
47 dummy2
This behavior differs from IPv4:
# ip address add 192.0.2.1/32 dev lo
# ip route add 198.51.100.0/24 nexthop via inet6 fe80::1 dev dummy1 nexthop via inet6 fe80::2 dev dummy2
# for i in {1..100}; do ip route get 198.51.100.${i} from 192.0.2.1 oif dummy2; done | grep -o dummy[0-9] | sort | uniq -c
100 dummy2
What happens is that fib6_table_lookup() returns a route with a matching
nexthop device (assuming it exists):
# perf record -e fib6:fib6_table_lookup -- bash -c "for i in {1..100}; do ip route get 2001:db8:10::${i} from 2001:db8:2::1 oif dummy2; done > /dev/null"
# perf script | grep -o dummy[0-9] | sort | uniq -c
100 dummy2
But it is later overwritten during path selection in fib6_select_path()
which instead chooses a nexthop according to the calculated hash.
Solve this by telling fib6_select_path() to skip path selection if we
have an oif match during output route lookup (iif being
LOOPBACK_IFINDEX).
Behavior after the change:
# sysctl -wq net.ipv6.conf.all.forwarding=1
# ip route add 2001:db8:10::/64 nexthop via fe80::1 dev dummy1 nexthop via fe80::2 dev dummy2
# for i in {1..100}; do ip route get 2001:db8:10::${i} from 2001:db8:2::1 oif dummy2; done | grep -o dummy[0-9] | sort | uniq -c
100 dummy2
Note that enabling forwarding is only needed because we did not add
neighbor entries for the gateway addresses. When forwarding is disabled
and CONFIG_IPV6_ROUTER_PREF is not enabled in kernel config, the kernel
will treat non-existing neighbor entries as errors and perform
round-robin between the nexthops:
# sysctl -wq net.ipv6.conf.all.forwarding=0
# for i in {1..100}; do ip route get 2001:db8:10::${i} from 2001:db8:2::1 oif dummy2; done | grep -o dummy[0-9] | sort | uniq -c
50 dummy1
50 dummy2
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260611154605.992528-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when using multipath routes without nexthop objects,
fib6_table_lookup() selects the nexthop with the highest score. This
means that when both a source address and an oif are specified, the
nexthop that is chosen is the one that matches in terms of oif:
# sysctl -wq net.ipv6.conf.all.forwarding=1
# ip address add 2001:db8:2::1/64 dev lo
# ip route add 2001:db8:10::/64 nexthop via fe80::1 dev dummy1 nexthop via fe80::2 dev dummy2
# perf record -e fib6:fib6_table_lookup -- bash -c "for i in {1..100}; do ip route get 2001:db8:10::${i} from 2001:db8:2::1 oif dummy1; done > /dev/null"
# perf script | grep -o dummy[0-9] | sort | uniq -c
100 dummy1
# perf record -e fib6:fib6_table_lookup -- bash -c "for i in {1..100}; do ip route get 2001:db8:10::${i} from 2001:db8:2::1 oif dummy2; done > /dev/null"
# perf script | grep -o dummy[0-9] | sort | uniq -c
100 dummy2
When using nexthop objects, fib6_table_lookup() selects the first
matching nexthop and not necessarily the one with the highest score:
# ip nexthop add id 1 via fe80::1 dev dummy1
# ip nexthop add id 2 via fe80::2 dev dummy2
# ip nexthop add id 3 group 1/2
# ip route add 2001:db8:20::/64 nhid 3
# perf record -e fib6:fib6_table_lookup -- bash -c "for i in {1..100}; do ip route get 2001:db8:20::${i} from 2001:db8:2::1 oif dummy1; done > /dev/null"
# perf script | grep -o dummy[0-9] | sort | uniq -c
100 dummy1
# perf record -e fib6:fib6_table_lookup -- bash -c "for i in {1..100}; do ip route get 2001:db8:20::${i} from 2001:db8:2::1 oif dummy2; done > /dev/null"
# perf script | grep -o dummy[0-9] | sort | uniq -c
100 dummy1
This is not very significant right now because the nexthop is later
overwritten during path selection in fib6_select_path(). However, the
next patch is going to skip path selection when we have an oif match
during output route lookup.
As a preparation for this change, align the nexthop object behavior with
the legacy one and make sure that fib6_table_lookup() always selects the
best matching nexthop. Do that by always returning 0 from
rt6_nh_find_match() in order not to terminate the loop in
nexthop_for_each_fib6_nh() and storing in arg->nh the best matching
nexthop so far.
Behavior after the change:
# perf record -e fib6:fib6_table_lookup -- bash -c "for i in {1..100}; do ip route get 2001:db8:20::${i} from 2001:db8:2::1 oif dummy1; done > /dev/null"
# perf script | grep -o dummy[0-9] | sort | uniq -c
100 dummy1
# perf record -e fib6:fib6_table_lookup -- bash -c "for i in {1..100}; do ip route get 2001:db8:20::${i} from 2001:db8:2::1 oif dummy2; done > /dev/null"
# perf script | grep -o dummy[0-9] | sort | uniq -c
100 dummy2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260611154605.992528-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/igmp6 walks IPv6 multicast memberships under RCU and
prints mca_flags without holding idev->mc_lock. The multicast paths
update the field while holding idev->mc_lock.
Annotate this intentional lockless snapshot with READ_ONCE() and the
matching writers with WRITE_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609081113.7613-2-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 throws ASSERT_RTNL() warnings on timestamp config, because
it tries to update features. mlx5e_hwtstamp_set() calls
netdev_update_features().
I missed this while grepping the drivers because tsconfig goes
through ndo_hwtstamp_set/get, not ethtool ops, even tho the new
uAPI is in ethtool Netlink. We could add a dedicated opt out bit
for mlx5, but NDOs were not supposed to be part of the ethtool locking
conversion in the first place.
The mlx5 features update is related to the "compressed CQE" format
which lacks timestamp, apparently. See commit c0194e2d0e ("net/mlx5e:
Disable rxhash when CQE compress is enabled").
Fixes: f9a3e05114 ("net: ethtool: optionally skip rtnl_lock on Netlink path for SET ops")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260611200355.2020663-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ACCEPT and DONE are the two downcalls of the handshake genl
family, both intended for use by the trusted handshake agent
(tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has
no privilege check at all.
The fd-lookup in handshake_nl_done_doit() only confirms that
some pending handshake request exists for the supplied sockfd;
it does not authenticate the sender. An unprivileged process
that guesses or observes a valid sockfd can therefore submit
a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel
consumer to proceed as if the handshake succeeded. A non-zero
status on a forged DONE tears down a legitimate in-flight
handshake before tlshd can report its real result.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260609141831.90694-1-cel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extended IPv4 L4 header mode in act_pedit can select TCP or UDP
header fields without confirming that the IPv4 protocol field matches
the selected transport header.
That lets a rule written for TCP or UDP modify unrelated payload bytes
in a packet carrying a different protocol.
Verify that the IPv4 header is long enough, that the protocol matches
the selected TCP or UDP header, and that the packet is not a non-initial
fragment before applying TCP or UDP extended header edits.
Cc: stable+noautosel@kernel.org # in real rule sets the match confirms this before calling the action
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: Add support for HCI_LE_Set_Host_Feature [v2]
- SMP: Use AES-CMAC library API
- sockets: convert to getsockopt_iter
- Add SPDX id lines to some source files
drivers:
- btintel_pcie: Support Product level reset
- btintel_pcie: Add support for smart trigger dump
- btintel_pcie: Add 50 ms delay before MAC init on BlazarIW
- btintel_pcie: Separate coredump work from RX work
- btmtk: add event filter to filter specific event
- btrtl: fix RTL8761B/BU broken LE extended scan
- btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
- btusb: Add Realtek RTL8922AE VID/PID 0bda/d923
- btusb: MT7922: Add VID/PID 0e8d/223c
- btusb: MT7925: Add VID/PID 0e8d/8c38
- btusb: Add support for TP-Link TL-UB250
- btusb: Add Mercusys MA530 for Realtek RTL8761BUV
- btusb: Add TP-Link UB600 for Realtek 8761BUV
- btusb: Add support for Intel Lizard Peak 2 (0x8087:0x0040)
- btusb: Add USB ID 2c4e:0128 for Mercusys MA60XNB
- btusb: MT7925: Add VID/PID 13d3/3609
* tag 'for-net-next-2026-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (49 commits)
Bluetooth: btintel_pcie: Separate coredump work from RX work
Bluetooth: btmtksdio: fix infinite loop in btmtksdio_txrx_work()
Bluetooth: qca: Add BT FW build version to kernel log
Bluetooth: vhci: validate devcoredump state before side effects
Bluetooth: L2CAP: validate connectionless PSM length
Bluetooth: hci: validate codec capability element length
Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref
Bluetooth: btintel_pcie: Load IOSF debug regs by controller variant
Bluetooth: btintel_pcie: Add 50 ms delay before MAC init on BlazarIW
Bluetooth: Add SPDX id lines to some source files
Bluetooth: btintel_pcie: Add support for smart trigger dump
Bluetooth: hci_h5: reset hci_uart::priv in the close() method
Bluetooth: btusb: clean up probe error handling
Bluetooth: btusb: fix wakeup irq devres lifetime
Bluetooth: btusb: fix wakeup source leak on probe failure
Bluetooth: btusb: fix use-after-free on marvell probe failure
Bluetooth: btusb: fix use-after-free on registration failure
Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
Bluetooth: hci_core: Fix UAF in hci_unregister_dev()
Bluetooth: hci_event: fix simultaneous discovery stuck in FINDING
...
====================
Link: https://patch.msgid.link/20260611183358.176776-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Heidelberg says:
====================
NFC updates for net-next 20260611
- nxp-nci: Add ISO15693 support
- nxp-nci: treat -ENXIO in IRQ thread as no data available
- nci: uart: Constify struct tty_ldisc_ops
- trf7970a: fix comment typos
- Use named initializers for struct i2c_device_id
- MAINTAINERS: Update address for David Heidelberg
* tag 'nfc-net-next-20260611' of https://codeberg.org/linux-nfc/linux:
MAINTAINERS: Update address for David Heidelberg
nfc: Use named initializers for struct i2c_device_id
nfc: nxp-nci: treat -ENXIO in IRQ thread as no data available
nfc: nxp-nci: Add ISO15693 support
nfc: nci: uart: Constify struct tty_ldisc_ops
nfc: trf7970a: fix comment typos
====================
Link: https://patch.msgid.link/1aed7555-3d24-413c-b284-bc85fdd33055@ixit.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce vendor-specific PHY tunable identifiers to control the
KSZ87xx low-loss cable erratum handling through the ethtool PHY
tunable interface.
The following tunables are added:
- a boolean "short-cable" tunable, applying a documented and
conservative preset intended for short or low-loss Ethernet cables;
- an integer LPF bandwidth tunable, allowing advanced adjustment of the
receiver low-pass filter bandwidth;
- an integer DSP EQ initial value tunable, allowing advanced tuning of
the PHY equalizer initialization.
The actual behavior is implemented by the corresponding PHY and switch
drivers.
Reviewed-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-2-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_pm_announced_del_timer() removes the matched ADD_ADDR entry (if
found) from the ADD_ADDR list only if check_id is false. That's
dangerous, and not clear, because it means the caller should be free the
entry only in some cases, and it easy to miss that.
Instead, make it static, and call it from mptcp_pm_add_addr_echoed,
which is the only other case where mptcp_pm_add_addr_del_timer should be
called with check_id set to true. Bonus with that: a second call to
mptcp_pm_add_addr_lookup_by_addr() can be avoided.
Note that instead of adding the signature above to avoid a compilation
issue because this helper is called before the definition of the
function, the whole helper is moved above where it is first called. Its
content is untouched, except the addition of the 'static' keyboard.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-14-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, only using the 'add' or 'anno' prefixes
is confusing -- generally associated to the action of adding something,
or the Latin name for "year" -- and lack of uniformity.
This has been causing issues in the past, e.g. del_add_timer seemed to
suggest the goal is to delete a previously added timer.
Instead, use the mptcp_pm_announced_ prefix.
While at it, slightly improves some helpers:
- mptcp_lookup_anno_list_by_saddr: no need to specify what is used to do
the lookup: mptcp_pm_announced_lookup.
- mptcp_pm_sport_in_anno_list: it doesn't just compare the port, but the
whole address linked to the sublow: mptcp_pm_announced_has_ssk.
- mptcp_pm_alloc_anno_list: it allocates one item of the list, not a
whole list: mptcp_pm_announced_alloc.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-11-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to most places in the MPTCP code. So instead of passing the
subflow list and use list_for_each_entry(subflow, list, node), pass the
msk and use mptcp_for_each_subflow(msk, subflow).
That's clearer and more uniform with the rest.
While at it, add 'pm_' prefix for the exported one to easily identify
the origin. Plus replace 'lookup' by 'has', because a bool is returned.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-9-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the signal.
To be able to send this ADD_ADDR, the TCP timestamps option can now be
dropped. This is done, when needed by setting the *drop_ts parameter
from mptcp_established_options. This feature is controlled by a new
net.mptcp.add_addr_v6_port_drop_ts sysctl knob, enabled by default.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature can be
controlled by a sysctl knob.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/448
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-6-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the address signal.
The idea is to let MPTCP dropping the TCP-timestamps option for some
specific packets, to be able to send some specific pure ACK carrying >28
bytes of MPTCP options, like with this specific ADD_ADDR. A new
parameter is passed from tcp_established_options to the MPTCP side to
indicate if the TCP TS option is used, and if it should be dropped. The
next commit implements the part on MPTCP side, but split into two
patches to help TCP maintainers to identify the modifications on TCP
side. This feature will be controlled by a new add_addr_v6_port_drop_ts
MPTCP sysctl knob.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature will be
controlled by a sysctl knob.
Note that it would be technically possible to squeeze both options into
the header if the ADD_ADDR is first written, and then the TCP timestamps
without the NOPs preceding it. But this means more modifications on TCP
side, plus some middleboxes could still be disrupted by that.
In this implementation, an unused bit is used in mptcp_out_options
structure to avoid passing an address to a local variable. Reading and
setting it needs CONFIG_MPTCP, so the whole block now has this #if
condition: mptcp_established_options() is then no longer used without
CONFIG_MPTCP.
About alternatives, instead of passing a new boolean (has_ts), another
option would be to pass the whole option structure (opts), but
'struct tcp_out_options' is currently defined in tcp_output.c, and it
would need to be exported. Plus that means the removal of the TCP TS
option would be done on the MPTCP side, and not here on the TCP side.
It feels clearer to remove other TCP options from the TCP side, than
hiding that from the MPTCP side.
Yet an other alternative would be to pass the size already taken by the
other TCP options, and have a way to drop them all when needed. But this
feels better to target only the timestamps option where dropping it
should be safe, even if it is currently the only option that would be
set before MPTCP, when MPTCP is used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-5-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This sysctl is going to be used in the next commits to drop TCP
timestamps option, to be able to send an ADD_ADDR with a v6 IP address
and a port number. It is enabled by default.
This knob is explicitly disabled in the MPTCP Join selftest, with the
"signal addr list progresses after tx drop" subtest, to continue
verifying the previous behaviour where the ADD_ADDR is not sent due to a
lack of space.
While at it, move syn_retrans_before_tcp_fallback down from struct
mptcp_pernet, to avoid creating another 3 bytes hole.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-4-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
