PSE PI setup may encompass multiple PSE controllers or auxiliary circuits
that collectively manage power delivery to one Ethernet port.
Such configurations might support a range of PoE standards and require
the capability to dynamically configure power delivery based on the
operational mode (e.g., PoE2 versus PoE4) or specific requirements of
connected devices. In these instances, a dedicated PSE PI node becomes
essential for accurately documenting the system architecture. This node
would serve to detail the interactions between different PSE controllers,
the support for various PoE modes, and any additional logic required to
coordinate power delivery across the network infrastructure.
The old usage of "#pse-cells" is unsuficient as it carries only the PSE PI
index information.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-8-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Power Sourcing Equipment Power Interface (PSE PI) plays a pivotal role
in the architecture of Power over Ethernet (PoE) systems. It is essentially
a blueprint that outlines how one or multiple power sources are connected
to the eight-pin modular jack, commonly known as the Ethernet RJ45 port.
This connection scheme is crucial for enabling the delivery of power
alongside data over Ethernet cables.
This patch adds support for getting the PSE controller node through PSE PI
device subnode.
This supports adds a way to get the PSE PI id from the pse_pi devicetree
subnode of a PSE controller node simply by reading the reg property.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-7-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull pwm fixes from Uwe Kleine-König:
"The first patch fixes a regression in the suspend/resume path for the
dwc pwm driver that was introduced in v6.9-rc1 when support for 16
channel devices was added.
The second patch fixes a bunch of device tree binding check warnings"
* tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property
pwm: dwc: allow suspend/resume for 16 channels
Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction
Pull virtio bugfixes from Michael Tsirkin:
"Some small, obvious (in hindsight) bugfixes:
- new ioctl in vhost-vdpa has a wrong # - not too late to fix
- vhost has apparently been lacking an smp_rmb() - due to code
duplication :( The duplication will be fixed in the next merge
cycle, this is a minimal fix
- an error message in vhost talks about guest moving used index -
which of course never happens, guest only ever moves the available
index
- i2c-virtio didn't set the driver owner so it did not get refcounted
correctly"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct misleading printing information
vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE
virtio: store owner from modules with register_virtio_driver()
vhost: Add smp_rmb() in vhost_enable_notify()
vhost: Add smp_rmb() in vhost_vq_avail_empty()
Pull drm fixes from Dave Airlie:
"Looks like everyone woke up after holidays, this weeks pull has a
bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then
i915/xe have a few, a bunch of msm fixes, then some scattered driver
fixes.
I expect things will settle down for rc5.
client:
- Protect connector modes with mode_config mutex
ast:
- Fix soft lockup
host1x:
- Do not setup DMA for virtual addresses
ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling
nouveau:
- gsp: Fix OOB access
- Fix casting
panfrost:
- Fix error path in MMU code
qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"
vmwgfx:
- Enable DMA for SEV mappings
i915:
- Couple CDCLK programming fixes
- HDCP related fix
- 4 Bigjoiner related fixes
- Fix for a circular locking around GuC on reset+wedged case
xe:
- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
msm:
- DP refcount leak fix on disconnect
- Add missing newlines to prints in msm_fb and msm_kms
- fix dpu debugfs entry permissions
- Fix the interface table for the catalog of X1E80100
- fix irq message printing
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix
amdkfd:
- GPU reset fixes
- fix ioctl integer overflow"
* tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits)
amdkfd: use calloc instead of kzalloc to avoid integer overflow
drm/xe: Label RING_CONTEXT_CONTROL as masked
drm/xe/xe_migrate: Cast to output precision before multiplying operands
drm/xe/hwmon: Cast result to output precision on left shift of operand
drm/xe/display: Fix double mutex initialization
drm/amdgpu: differentiate external rev id for gfx 11.5.0
drm/amd/display: Adjust dprefclk by down spread percentage.
drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
drm/amd/display: fix disable otg wa logic in DCN316
drm/amd/display: Do not recursively call manual trigger programming
drm/amd/display: always reset ODM mode in context when adding first plane
drm/amdgpu: fix incorrect number of active RBs for gfx11
drm/amd/display: Return max resolution supported by DWB
amd/amdkfd: sync all devices to wait all processes being evicted
drm/amdgpu: clear set_q_mode_offs when VM changed
drm/amdgpu: Fix VCN allocation in CPX partition
drm/amd/pm: fix the high voltage issue after unload
drm/amd/display: Skip on writeback when it's not applicable
drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2
...
Newer NIC will introduce a new part number, now add it
into devlink device info.
This patch also updates the information of "board.id" in
nfp.rst to match the devlink-info.rst.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definition and documentation for the new generic
info "board.part_number".
The new one is for part number specific use, and board.id
is modified to match the documentation in devlink-info.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes for v6.9
Display:
- Fixes for PM refcount leak when DP goes to disconnected state and
also when link training fails. This is also one of the issues found
with the pm runtime series
- Add missing newlines to prints in msm_fb and msm_kms
- Change permissions of some dpu debugfs entries which write to const
data from catalog to read-only to avoid protection faults
- Fix the interface table for the catalog of X1E80100. This is an
important fix to bringup DP for X1E80100.
- Logging fix to print the callback symbol in the invalid IRQ message
case rather than printing when its known to be NULL.
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
GPU:
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvFwRUcHGWva7oDeydq1PTiZMduuykCD2MWaFrT4iMGZA@mail.gmail.com
Pull more bcachefs fixes from Kent Overstreet:
"Notable user impacting bugs
- On multi device filesystems, recovery was looping in
btree_trans_too_many_iters(). This checks if a transaction has
touched too many btree paths (because of iteration over many keys),
and isuses a restart to drop unneeded paths.
But it's now possible for some paths to exceed the previous limit
without iteration in the interior btree update path, since the
transaction commit will do alloc updates for every old and new
btree node, and during journal replay we don't use the btree write
buffer for locking reasons and thus those updates use btree paths
when they wouldn't normally.
- Fix a corner case in rebalance when moving extents on a
durability=0 device. This wouldn't be hit when a device was
formatted with durability=0 since in that case we'll only use it as
a write through cache (only cached extents will live on it), but
durability can now be changed on an existing device.
- bch2_get_acl() could rarely forget to handle a transaction restart;
this manifested as the occasional missing acl that came back after
dropping caches.
- Fix a major performance regression on high iops multithreaded write
workloads (only since 6.9-rc1); a previous fix for a deadlock in
the interior btree update path to check the journal watermark
introduced a dependency on the state of btree write buffer flushing
that we didn't want.
- Assorted other repair paths and recovery fixes"
* tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs: (25 commits)
bcachefs: Fix __bch2_btree_and_journal_iter_init_node_iter()
bcachefs: Kill read lock dropping in bch2_btree_node_lock_write_nofail()
bcachefs: Fix a race in btree_update_nodes_written()
bcachefs: btree_node_scan: Respect member.data_allowed
bcachefs: Don't scan for btree nodes when we can reconstruct
bcachefs: Fix check_topology() when using node scan
bcachefs: fix eytzinger0_find_gt()
bcachefs: fix bch2_get_acl() transaction restart handling
bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list
bcachefs: Fix gap buffer bug in bch2_journal_key_insert_take()
bcachefs: Rename struct field swap to prevent macro naming collision
MAINTAINERS: Add entry for bcachefs documentation
Documentation: filesystems: Add bcachefs toctree
bcachefs: JOURNAL_SPACE_LOW
bcachefs: Disable errors=panic for BCH_IOCTL_FSCK_OFFLINE
bcachefs: Fix BCH_IOCTL_FSCK_OFFLINE for encrypted filesystems
bcachefs: fix rand_delete unit test
bcachefs: fix ! vs ~ typo in __clear_bit_le64()
bcachefs: Fix rebalance from durability=0 device
bcachefs: Print shutdown journal sequence number
...
Silicon Revision 1.0 of the AM65x came with a slightly different ICSSG
support: Only 2 PRUs per slice are available and instead 2 additional
DMA channels are used for management purposes. We have no restrictions
on specified PRUs, but the DMA channels need to be adjusted.
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull x86 mitigations from Thomas Gleixner:
"Mitigations for the native BHI hardware vulnerabilty:
Branch History Injection (BHI) attacks may allow a malicious
application to influence indirect branch prediction in kernel by
poisoning the branch history. eIBRS isolates indirect branch targets
in ring0. The BHB can still influence the choice of indirect branch
predictor entry, and although branch predictor entries are isolated
between modes when eIBRS is enabled, the BHB itself is not isolated
between modes.
Add mitigations against it either with the help of microcode or with
software sequences for the affected CPUs"
[ This also ends up enabling the full mitigation by default despite the
system call hardening, because apparently there are other indirect
calls that are still sufficiently reachable, and the 'auto' case just
isn't hardened enough.
We'll have some more inevitable tweaking in the future - Linus ]
* tag 'nativebhi' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Add BHI_NO
x86/bhi: Mitigate KVM by default
x86/bhi: Add BHI mitigation knob
x86/bhi: Enumerate Branch History Injection (BHI) bug
x86/bhi: Define SPEC_CTRL_BHI_DIS_S
x86/bhi: Add support for clearing branch history at syscall entry
x86/syscall: Don't force use of indirect calls for system calls
x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file
BHI mitigation mode spectre_bhi=auto does not deploy the software
mitigation by default. In a cloud environment, it is a likely scenario
where userspace is trusted but the guests are not trusted. Deploying
system wide mitigation in such cases is not desirable.
Update the auto mode to unconditionally mitigate against malicious
guests. Deploy the software sequence at VMexit in auto mode also, when
hardware mitigation is not available. Unlike the force =on mode,
software sequence is not deployed at syscalls in auto mode.
Suggested-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Branch history clearing software sequences and hardware control
BHI_DIS_S were defined to mitigate Branch History Injection (BHI).
Add cmdline spectre_bhi={on|off|auto} to control BHI mitigation:
auto - Deploy the hardware mitigation BHI_DIS_S, if available.
on - Deploy the hardware mitigation BHI_DIS_S, if available,
otherwise deploy the software sequence at syscall entry and
VMexit.
off - Turn off BHI mitigation.
The default is auto mode which does not deploy the software sequence
mitigation. This is because of the hardening done in the syscall
dispatch path, which is the likely target of BHI.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Many devices send event notifications for the IO queues,
such as tx and rx queues, through event queues.
Enable a privileged owner, such as a hypervisor PF, to set the number
of IO event queues for the VF and SF during the provisioning stage.
example:
Get maximum IO event queues of the VF device::
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 10
Set maximum IO event queues of the VF device::
$ devlink port function set pci/0000:06:00.0/2 max_io_eqs 32
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 32
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modules registering driver with register_virtio_driver() might forget to
set .owner field. i2c-virtio.c for example has it missing. The field
is used by some other kernel parts for reference counting
(try_module_get()), so it is expected that drivers will set it.
Solve the problem by moving this task away from the drivers to the core
virtio code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Fixes: 3cfc883804 ("i2c: virtio: add a virtio i2c frontend driver")
Cc: "Jie Deng" <jie.deng@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-1-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit eb386617be ("bcachefs: Errcode tracepoint, documentation")
adds initial bcachefs documentation (private error codes) but without
any table of contents tree for the filesystem docs, hence Sphinx warns:
Documentation/filesystems/bcachefs/errorcodes.rst: WARNING: document isn't included in any toctree
Add bcachefs toctree to fix above warning.
Fixes: eb386617be ("bcachefs: Errcode tracepoint, documentation")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add binary and integer sub-type support for indexed-array to display bond
arp and ns targets. Here is what the result looks like:
# ip link add bond0 type bond mode 1 \
arp_ip_target 192.168.1.1,192.168.1.2 ns_ip6_target 2001::1,2001::2
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo'
"arp-ip-target": [
"192.168.1.1",
"192.168.1.2"
],
[...]
"ns-ip6-target": [
"2001::1",
"2001::2"
],
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track the number of times a CQE was expected to not be delivered on PTP Tx
port timestamping CQ. A CQE is expected to not be delivered if a certain
amount of time passes since the corresponding CQE containing the DMA
timestamp information has arrived. Increment the late_cqe counter when such
a CQE does manage to be delivered to the CQ.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-3-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multiple network devices that support hardware timestamping appear to have
common behavior with regards to timestamp handling. Implement common Tx
hardware timestamping statistics in a tx_stats struct_group. Common Rx
hardware timestamping statistics can subsequently be implemented in a
rx_stats struct_group for ethtool_ts_stats.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-2-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull devicetree fixes from Rob Herring:
- Fix NIOS2 boot with external DTB
- Add missing synchronization needed between fw_devlink and DT overlay
removals
- Fix some unit-address regex's to be hex only
- Drop some 10+ year old "unstable binding" statements
- Add new SoCs to QCom UFS binding
- Add TPM bindings to TPM maintainers
* tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
nios2: Only use built-in devicetree blob if configured to do so
dt-bindings: timer: narrow regex for unit address to hex numbers
dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
dt-bindings: remoteproc: ti,davinci: remove unstable remark
dt-bindings: clock: ti: remove unstable remark
dt-bindings: clock: keystone: remove unstable remark
of: module: prevent NULL pointer dereference in vsnprintf()
dt-bindings: ufs: qcom: document SM6125 UFS
dt-bindings: ufs: qcom: document SC7180 UFS
dt-bindings: ufs: qcom: document SC8180X UFS
of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
driver core: Introduce device_link_wait_removal()
docs: dt-bindings: add missing address/size-cells to example
MAINTAINERS: Add TPM DT bindings to TPM maintainers
Add StarFive JH8100 dwmac support.
The JH8100 dwmac shares the same driver code as the JH7110 dwmac
and has only one reset signal.
Please refer to below:
JH8100: reset-names = "stmmaceth";
JH7110: reset-names = "stmmaceth", "ahb";
JH7100: reset-names = "ahb";
Example usage of JH8100 in the device tree:
gmac0: ethernet@16030000 {
compatible = "starfive,jh8100-dwmac",
"starfive,jh7110-dwmac",
"snps,dwmac-5.20";
...
};
Signed-off-by: Tan Chun Hau <chunhau.tan@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240403100549.78719-2-chunhau.tan@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
When interfacing with the ethtool commands it's handy to
be able to use the names of the flags. Example:
ethnl.pause_get({"header": {"dev-index": cfg.ifindex,
"flags": {'stats'}}})
Note that not all commands accept all the flags,
but the meaning of the bits does not change command
to command.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Ensure perf events programmed to count during guest execution are
actually enabled before entering the guest in the nVHE
configuration
- Restore out-of-range handler for stage-2 translation faults
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches
- Fix early handling of architectural VHE-only systems to ensure E2H
is appropriately set
- Correct a format specifier warning in the arch_timer selftest
- Make the KVM banner message correctly handle all of the possible
configurations
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
entries (old vs. new) and ultimately neglects to clear PV_UNHALT
from vCPUs with HLT-exiting disabled
- Documentation fixes for SEV
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP
- Fix a 14-year-old goof in a declaration shared by host and guest;
the enabled field used by Linux when running as a guest pushes the
size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
really unconsequential because KVM never consumes anything beyond
the first 64 bytes, but the resulting struct does not match the
documentation
Selftests:
- Fix spelling mistake in arch_timer selftest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Rationalise KVM banner output
arm64: Fix early handling of FEAT_E2H0 not being implemented
KVM: arm64: Ensure target address is granule-aligned for range TLBI
KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
KVM: arm64: Don't pass a TLBI level hint when zapping table entries
KVM: arm64: Don't defer TLB invalidation when zapping table entries
KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
KVM: arm64: Fix out-of-IPA space translation fault handling
KVM: arm64: Fix host-programmed guest events in nVHE
RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
RISC-V: KVM: Remove second semicolon
KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
Documentation: kvm/sev: separate description of firmware
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
...
