* pci/resource:
PCI: Work around poweroff & suspend-to-RAM issue on Macbook Pro 11
PCI: Do not disregard parent resources starting at 0x0
Conflicts:
arch/x86/pci/fixup.c
* pci/pm:
PCI/PM: Avoid using device_may_wakeup() for runtime PM
x86/PCI: Avoid AMD SB7xx EHCI USB wakeup defect
PCI/PM: Restore the status of PCI devices across hibernation
drm/radeon: make MacBook Pro d3_delay quirk more generic
drm/amdgpu: remove unnecessary save/restore of pdev->d3_delay
PCI/PM: Add needs_resume flag to avoid suspend complete optimization
PCI: imx6: Fix config read timeout handling
switchtec: Fix minor bug with partition ID register
switchtec: Use new cdev_device_add() helper function
PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMA
Update the Hyper-V vPCI driver to use the Server-2016 version of the vPCI
protocol, fixing MSI creation and retargeting issues.
Signed-off-by: Jork Loeser <jloeser@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
With the introduction of struct pci_host_bridge.map_irq pointer it is
possible to assign IRQs for all devices originating from a PCI host bridge
at probe time; this is implemented through pci_assign_irq() that relies on
the struct pci_host_bridge.map_irq pointer to map IRQ for a given device.
The benefits this brings are twofold:
- the IRQ for a device is assigned once at probe time
- the IRQ assignment works also for hotplugged devices
With all DT based PCI host bridges converted to the struct
pci_host_bridge.{map/swizzle}_irq hooks mechanism the DT IRQ allocation in
ARM64 pcibios_alloc_irq() is now redundant and can be removed.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Legacy PCI host controllers (ie host controllers that set-up the PCI bus
through the ARM pci_common_init() API) are currently relying on
pci_fixup_irqs() to assign legacy PCI irqs to devices. This is not ideal
in that pci_fixup_irqs() assigns IRQs for all PCI devices present in a given
system some of which may well be enabled by the time pci_fixup_irqs() is
called (ie a system with multiple host controllers). With the introduction
of struct pci_host_bridge.(*map_irq) pointer it is possible to assign IRQs
for all devices originating from a PCI host bridge at probe time; this is
implemented through pci_assign_irq() that relies on the struct
pci_host_bridge.map_irq pointer to map IRQ for a given device.
The benefits this brings are twofold:
- the IRQ for a device is assigned once at probe time
- the IRQ assignment works also for hotplugged devices
Remove pci_fixup_irqs() call from bios32 code and rely on pci_assign_irq()
to carry out the IRQ mapping at device probe time.
The map_irq() and swizzle_irq() struct pci_host_bridge callbacks are set-up
in the struct pci_host_bridge created in the bios32 pcibios_init_hw()
function and mach-* code paths (for PCI mach implementations that require a
specific struct hw_pci.(*scan) function callback).
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: folded in fixes from Lorenzo:
http://lkml.kernel.org/r/20170701140629.GC8977@red-moon]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>
When a process runs out of stack the parisc kernel wrongly faults with SIGBUS
instead of the expected SIGSEGV signal.
This example shows how the kernel faults:
do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000]
trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000
The vma->vm_end value is the first address which does not belong to the vma, so
adjust the check to include vma->vm_end to the range for which to send the
SIGSEGV signal.
This patch unbreaks building the debian libsigsegv package.
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Architectures with a compat syscall table must put compat_sys_keyctl()
in it, not sys_keyctl(). The parisc architecture was not doing this;
fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull MIPS fixes from Ralf Baechle:
"Here's a final round of fixes for 4.12:
- Fix misordered instructions in assembly code making kenel startup
via UHB unreliable.
- Fix special case of MADDF and MADDF emulation.
- Fix alignment issue in address calculation in pm-cps on 64 bit.
- Fix IRQ tracing & lockdep when rescheduling
- Systems with MAARs require post-DMA cache flushes.
The reordering fix and the MADDF/MSUBF fix have sat in linux-next for
a number of days. The others haven't propagated from my pull tree to
linux-next yet but all have survived manual testing and Imagination's
automated test system and there are no pending bug reports"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Avoid accidental raw backtrace
MIPS: Perform post-DMA cache flushes on systems with MAARs
MIPS: Fix IRQ tracing & lockdep when rescheduling
MIPS: pm-cps: Drop manual cache-line alignment of ready_count
MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately
MIPS: head: Reorder instructions missing a delay slot
Pull ARM fix from Russell King:
"One final fix for 4.12 - Doug found a boot failure case triggered by
requesting a non-even MB vmalloc size"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8685/1: ensure memblock-limit is pmd-aligned
On POWER9 SMT8 the 24x7 API returns two result elements for physical core
and virtual CPU events and we need to add their counts to get the final
result.
Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 introduces a new version of the hypervisor API to access the 24x7
perf counters. The new version changed some of the structures used for
requests and results.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's an H24x7_DATA_BUFFER_SIZE constant, so use it in init_24x7_request.
There's also an HV_PERF_DOMAIN_MAX constant, so use it in
h_24x7_event_init. This makes the comment above the check redundant,
so remove it.
In add_event_to_24x7_request, a statement is terminated with a comma
instead of a semicolon. Fix it.
In hv-24x7.h, improve comments in struct hv_24x7_result.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The H_GET_24X7_CATALOG_PAGE hcall can return a signed error code, so fix
this in the code.
The H_GET_24X7_DATA hcall can return a signed error code, so fix this in
the code. Also, don't truncate it to 32 bit to use as return value for
make_24x7_request. In case of error h_24x7_event_commit_txn passes that
return value to generic code, so it should be a proper errno. The other
caller of make_24x7_request is single_24x7_request, whose callers don't
actually care which error code is returned so they are not affected by this
change.
Finally, h_24x7_get_value doesn't use the error code from
single_24x7_request, so there's no need to store it.
Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
make_24x7_request already calls log_24x7_hcall if it fails, so callers
don't have to do it again.
In fact, since the latter is now only called from the former, there's no
need for a separate log_24x7_hcall anymore so remove it.
Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
hv-24x7.h has a comment mentioning that result_buffer->results can't be
indexed as a normal array because it may contain results of variable sizes,
so fix the loop in h_24x7_event_commit_txn to take the variation into
account when iterating through results.
Another problem in that loop is that it sets h24x7hw->events[i] to NULL.
This assumes that only the i'th result maps to the i'th request, but that
is not guaranteed to be true. We need to leave the event in the array so
that we don't dereference a NULL pointer in case more than one result maps
to one request.
We still assume that each result has only one result element, so warn if
that assumption is violated.
Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
request_buffer can hold 254 requests, so if it already has that number of
entries we can't add a new one.
Also, define constant to show where the number comes from.
Fixes: e3ee15dc5d ("powerpc/perf/hv-24x7: Define add_event_to_24x7_request()")
Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
H_GET_24X7_CATALOG_PAGE needs to be passed the version number obtained from
the first catalog page obtained previously. This is a 64 bit number, but
create_events_from_catalog truncates it to 32-bit.
This worked on POWER8, but POWER9 actually uses the upper bits so the call
fails with H_P3 because the hypervisor doesn't recognize the version.
This patch also adds the hcall return code to the error message, which is
helpful when debugging the problem.
Fixes: 5c5cd7b502 ("powerpc/perf/hv-24x7: parse catalog and populate sysfs with events")
Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Flip the switch. Running around and screaming "IT'S ALIVE" is optional,
but recommended.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adds support for removing bolted (i.e kernel linear mapping) mappings on
powernv. This is needed to support memory hot unplug operations which
are required for the teardown of DAX/PMEM devices.
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add support for the devmap bit on PTEs and PMDs for PPC64 Book3S. This
is used to differentiate device backed memory from transparent huge
pages since they are handled in more or less the same manner by the core
mm code.
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adds support to powerpc for the altmap feature of ZONE_DEVICE memory. An
altmap is a driver provided region that is used to provide the backing
storage for the struct pages of ZONE_DEVICE memory. In situations where
large amount of ZONE_DEVICE memory is being added to the system the
altmap reduces pressure on main system memory by allowing the mm/
metadata to be stored on the device itself rather in main memory.
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Removes an indentation level and shuffles some code around to make the
following patch cleaner. No functional changes.
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently ZONE_DEVICE depends on X86_64 and this will get unwieldly as
new architectures (and platforms) get ZONE_DEVICE support. Move to an
arch selected Kconfig option to save us the trouble.
Cc: linux-mm@kvack.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Export it so it can be referenced inside a module.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the different spin loop primitives in some simple powerpc
spin loops, including those which will spin as a common case.
This will help to test the spin loop primitives before more
conversions are done.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add some includes of <linux/processor.h>]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commits 2c0cba482e ("arm: sun8i: sunxi-h3-h5: Add dt node
for the syscon control module") to 2428fd0fe5 ("arm64: defconfig: Enable
dwmac-sun8i driver on defconfig") and 3432a86e64 ("arm: sun8i:
orangepipc: use internal phy-mode") to 5a79b4f2a5 ("arm: sun8i:
orangepi-2: use internal phy-mode") that should be merged
through the arm-soc tree, and end up in merge conflicts and build failures.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Thomas Gleixner:
"Fixlets for x86:
- Prevent kexec crash when KASLR is enabled, which was caused by an
address calculation bug
- Restore the freeing of PUDs on memory hot remove
- Correct a negated pointer check in the intel uncore performance
monitoring driver
- Plug a memory leak in an error exit path in the RDT code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix memory leak on mount failure
x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug
x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization
perf/x86/intel/uncore: Fix wrong box pointer check
x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD
At present, interrupts are hard-disabled fairly late in the guest
entry path, in the assembly code. Since we check for pending signals
for the vCPU(s) task(s) earlier in the guest entry path, it is
possible for a signal to be delivered before we enter the guest but
not be noticed until after we exit the guest for some other reason.
Similarly, it is possible for the scheduler to request a reschedule
while we are in the guest entry path, and we won't notice until after
we have run the guest, potentially for a whole timeslice.
Furthermore, with a radix guest on POWER9, we can take the interrupt
with the MMU on. In this case we end up leaving interrupts
hard-disabled after the guest exit, and they are likely to stay
hard-disabled until we exit to userspace or context-switch to
another process. This was masking the fact that we were also not
setting the RI (recoverable interrupt) bit in the MSR, meaning
that if we had taken an interrupt, it would have crashed the host
kernel with an unrecoverable interrupt message.
To close these races, we need to check for signals and reschedule
requests after hard-disabling interrupts, and then keep interrupts
hard-disabled until we enter the guest. If there is a signal or a
reschedule request from another CPU, it will send an IPI, which will
cause a guest exit.
This puts the interrupt disabling before we call kvmppc_start_thread()
for all the secondary threads of this core that are going to run vCPUs.
The reason for that is that once we have started the secondary threads
there is no easy way to back out without going through at least part
of the guest entry path. However, kvmppc_start_thread() includes some
code for radix guests which needs to call smp_call_function(), which
must be called with interrupts enabled. To solve this problem, this
patch moves that code into a separate function that is called earlier.
When the guest exit is caused by an external interrupt, a hypervisor
doorbell or a hypervisor maintenance interrupt, we now handle these
using the replay facility. __kvmppc_vcore_entry() now returns the
trap number that caused the exit on this thread, and instead of the
assembly code jumping to the handler entry, we return to C code with
interrupts still hard-disabled and set the irq_happened flag in the
PACA, so that when we do local_irq_enable() the appropriate handler
gets called.
With all this, we now have the interrupt soft-enable flag clear while
we are in the guest. This is useful because code in the real-mode
hypercall handlers that checks whether interrupts are enabled will
now see that they are disabled, which is correct, since interrupts
are hard-disabled in the real-mode code.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Since commit b009031f74 ("KVM: PPC: Book3S HV: Take out virtual
core piggybacking code", 2016-09-15), we only have at most one
vcore per subcore. Previously, the fact that there might be more
than one vcore per subcore meant that we had the notion of a
"master vcore", which was the vcore that controlled thread 0 of
the subcore. We also needed a list per subcore in the core_info
struct to record which vcores belonged to each subcore. Now that
there can only be one vcore in the subcore, we can replace the
list with a simple pointer and get rid of the notion of the
master vcore (and in fact treat every vcore as a master vcore).
We can also get rid of the subcore_vm[] field in the core_info
struct since it is never read.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Intel PT enhancements:
- Support "ptwrite" instruction, a way to stuff 32 or 64 bit values into
the Intel PT trace (Adrian Hunter)
- Support power events in Intel PT to report changes to C-state (Adrian
Hunter)
- Synthesize Intel PT events as PERF_RECORD_SAMPLE records with a
perf_event_attr.type (PERF_TYPE_SYNTH) just after the range used by the
kernel, i.e. right after what is allocated for PMUs, at INT_MAX + 1U,
attr.config will have the identification for the synthesized event and
the PERF_SAMPLE_RAW payload will have its fields (Adrian Hunter)
Infrastructure changes:
- Remove warning() and error(), using instead pr_warning() and
pr_error(), consolidating error reporting (Arnaldo Carvalho de Melo)
- Add platform dependency to 'perf test 15' (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some function pointer structures are used externally to the kernel, like
the paravirt structures. These should never be randomized, so mark them
as such, in preparation for enabling randstruct's automatic selection
of all-function-pointer structures.
These markings are verbatim from Brad Spengler/PaX Team's code in the
last public patch of grsecurity/PaX based on my understanding of the
code. Changes or omissions from the original code are mine and don't
reflect the original grsecurity/PaX code.
Signed-off-by: Kees Cook <keescook@chromium.org>
This marks many critical kernel structures for randomization. These are
structures that have been targeted in the past in security exploits, or
contain functions pointers, pointers to function pointer tables, lists,
workqueues, ref-counters, credentials, permissions, or are otherwise
sensitive. This initial list was extracted from Brad Spengler/PaX Team's
code in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.
Left out of this list is task_struct, which requires special handling
and will be covered in a subsequent patch.
Signed-off-by: Kees Cook <keescook@chromium.org>
With the new task struct randomization, we can run into a build
failure for certain random seeds, which will place fields beyond
the allow immediate size in the assembly:
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:803: Error: bad immediate value for offset (4096)
Only two constants in asm-offset.h are affected, and I'm changing
both of them here to work correctly in all configurations.
One more macro has the problem, but is currently unused, so this
removes it instead of adding complexity.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[kees: Adjust commit log slightly]
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull powerpc fixes from Michael Ellerman:
"Hopefully the last two powerpc fixes for 4.12.
The CXL one is larger than I'd usually send at rc7, but it fixes new
code this cycle, so better to have it working for the release. It was
actually sent a few weeks back but got blocked in testing behind
another fix that was causing issues.
We are still tracking one crash in v4.12-rc7, but only one person has
reproduced it and the commit identified by bisect doesn't touch any of
the relevant code, so I think it's 50/50 whether that commit is
actually the problem or it's some code layout / toolchain issue.
Two fixes for code we merged this cycle:
- cxl: Fixes for Coherent Accelerator Interface Architecture 2.0
- Avoid miscompilation w/GCC 4.6.3 on 32-bit - don't inline
copy_to/from_user()
Thanks to Al Viro, Larry Finger, Christophe Lombard"
* tag 'powerpc-4.12-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Avoid miscompilation w/GCC 4.6.3 - don't inline copy_to/from_user()
cxl: Fixes for Coherent Accelerator Interface Architecture 2.0
Pull IOMMU fixes from Joerg Roedel:
"Two fixes:
- A fix for AMD IOMMU interrupt remapping code when IRQs are
forwarded directly to KVM guests
- Fixed check in the recently merged code to allow tboot with
Intel VT-d disabled"
* tag 'iommu-fixes-v4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix interrupt remapping when disable guest_mode
iommu/vt-d: Correctly disable Intel IOMMU force on
Now, we have dedicated non-cacheable region for consistent DMA
operations. However, that region can still be marked as bufferable by
MPU, so it'd be safer to have barriers by default. M-class machines
that didn't need it until now also likely won't need it in the future,
therefore, we offer this as an option.
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
R/M classes of cpus can have memory covered by MPU which in turn might
configure RAM as Normal i.e. bufferable and cacheable. It breaks
dma_alloc_coherent() and friends, since data can stuck in caches now
or be buffered.
This patch factors out DMA support for NOMMU configuration into
separate entity which provides dedicated dma_ops. We have to handle
there several cases:
- configurations with MMU/MPU setup
- configurations without MMU/MPU setup
- special case for M-class, since caches and MPU there are optional
In general we rely on default DMA area for coherent allocations or/and
per-device memory reserves suitable for coherent DMA, so if such
regions are set coherent allocations go from there.
In case MMU/MPU was not setup we fallback to normal page allocator for
DMA memory allocation.
In case we run M-class cpus, for configuration without cache support
(like Cortex-M3/M4) dma operations are forced to be coherent and wired
with dma-noop (such decision is made based on cacheid global
variable); however, if caches are detected there and no DMA coherent
region is given (either default or per-device), dma is disallowed even
MPU is not set - it is because M-class implement system memory map
which defines part of address space as Normal memory.
Reported-by: Alexandre Torgue <alexandre.torgue@st.com>
Reported-by: Andras Szemzo <sza@esh.hu>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
[hch: removed the dma_supported() implementation that isn't required anymore]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, internals of dma_common_mmap() is compiled out if build is
done for either NOMMU or target which explicitly says it does not
have/want coherent DMA mmap. It turned out that dma_common_mmap() can
be handy in NOMMU setup (at least for ARM).
This patch converts exitent NOMMU targets to use ARCH_NO_COHERENT_DMA_MMAP,
thus when CONFIG_MMU is gone from dma_common_mmap() their behaviour stays
unchanged.
ARM is not converted to ARCH_NO_COHERENT_DMA_MMAP because it 1)
already has mmap callback which can handle (at some extent) NOMMU 2)
already defines dummy pgprot_noncached() for NOMMU build.
c6x and frv stay untouched since they already have ARCH_NO_COHERENT_DMA_MMAP.
Cc: Steven Miao <realmz6@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
struct jit_ctx::image is used the store a pointer to the jitted
intructions, which are always little-endian. These instructions
are thus correctly converted from native order to little-endian
before being stored but the pointer 'image' is declared as for
native order values.
Fix this by declaring the field as __le32* instead of u32*.
Same for the pointer used in jit_fill_hole() to initialize
the image.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The macro insn_fetch marks the 'type' argument as having a specified
alignment. Type attributes can only be applied to structs, unions, or
enums, but insn_fetch is only ever invoked with integral types, so Clang
produces 19 -Wignored-attributes warnings for this source file.
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/ARM updates for 4.13
- vcpu request overhaul
- allow timer and PMU to have their interrupt number
selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
Conflicts:
arch/s390/include/asm/kvm_host.h
Commit 2a26d31b1b ("ARM: OMAP2+: Remove unused legacy code for PRM")
removed PRM platform init code that I thought is unused. Turns out omap4
still needs this code, so let's do a partial revert to add it back.
I probably missed this earlier as the comments used to say
"OMAP4+ is DT only now" for !of_have_populated_dt() to exit early and
missed the negative test. Let's not add those lines back as they are
confusing and no longer needed as we only boot in device tree mode.
Without things things can mysterious fail for i2c, for example LM75
I2C temperature sensor can stop working as the PRM interrupts won't work.
Fixes: 2a26d31b1b ("ARM: OMAP2+: Remove unused legacy code for PRM")
Signed-off-by: Tony Lindgren <tony@atomide.com>
