pcie_clkreqn actually doesn't work at all, so replace it with
pcie_clkreqn_cpm.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables the gpu and adds the mali-supply power for RK3399-GRU
devices.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
keep-power-in-suspend was invented for SDIO only, so it should
not be used for eMMC node.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Somehow the strange property ordering of the rv1108 mmc nodes slipped
through when it was added. To lessen the confusion in the future, do
the needed reordering to bring them in line with our regular order.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable sdmmc on rv1108 evaluation board. Also
add pinctrl for sdmmc controller.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
huge at all, a revert of a patch that turned out to break things, a
fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
definition correct, and a few minor serial driver fixes for reported
issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix TIOCGPTPEER ioctl definition
tty: hide unused pty_get_peer function
tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
serial: imx: Prevent TX buffer PIO write when a DMA has been started
Revert "serial: imx-serial - move DMA buffer configuration to DT"
serial: sh-sci: Uninitialized variables in sysfs files
serial: st-asc: Potential error pointer dereference
the mailbox and ethmac nodes used the magic number "0" instead of the
GIC_SPI preprocessor macro. Additionally the ethmac used the magic
number "1" instead of IRQ_TYPE_EDGE_RISING.
Fix this to make the .dtsi easier to read.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
On tango platforms, firmware configures the CPU clock, and Linux is
then only allowed to use the cpu_clk_divider to change the frequency.
Build the OPP table dynamically at init, in order to support whatever
firmware throws at us.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull KVM fixes from Radim Krčmář:
"A bunch of small fixes for x86"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: hyperv: avoid livelock in oneshot SynIC timers
KVM: VMX: Fix invalid guest state detection after task-switch emulation
x86: add MULTIUSER dependency for KVM
KVM: nVMX: Disallow VM-entry in MOV-SS shadow
KVM: nVMX: track NMI blocking state separately for each VMCS
KVM: x86: masking out upper bits
Pull powerpc fixes from Michael Ellerman:
"A handful of fixes, mostly for new code:
- some reworking of the new STRICT_KERNEL_RWX support to make sure we
also remove executable permission from __init memory before it's
freed.
- a fix to some recent optimisations to the hypercall entry where we
were clobbering r12, this was breaking nested guests (PR KVM).
- a fix for the recent patch to opal_configure_cores(). This could
break booting on bare metal Power8 boxes if the kernel was built
without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.
- .. and finally a workaround for spurious PMU interrupts on Power9
DD2.
Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh"
* tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
powerpc/mm/hash: Refactor hash__mark_rodata_ro()
powerpc/mm/radix: Refactor radix__mark_rodata_ro()
powerpc/64s: Fix hypercall entry clobbering r12 input
powerpc/perf: Avoid spurious PMU interrupts after idle
powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()
Pull x86 fixes from Ingo Molnar:
"Half of the fixes are for various build time warnings triggered by
randconfig builds. Most (but not all...) were harmless.
There's also:
- ACPI boundary condition fixes
- UV platform fixes
- defconfig updates
- an AMD K6 CPU init fix
- a %pOF printk format related preparatory change
- .. and a warning fix related to the tlb/PCID changes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/devicetree: Convert to using %pOF instead of ->full_name
x86/platform/uv/BAU: Disable BAU on single hub configurations
x86/platform/intel-mid: Fix a format string overflow warning
x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG
x86/build: Silence the build with "make -s"
x86/io: Add "memory" clobber to insb/insw/insl/outsb/outsw/outsl
x86/fpu/math-emu: Avoid bogus -Wint-in-bool-context warning
x86/fpu/math-emu: Fix possible uninitialized variable use
perf/x86: Shut up false-positive -Wmaybe-uninitialized warning
x86/defconfig: Remove stale, old Kconfig options
x86/ioapic: Pass the correct data to unmask_ioapic_irq()
x86/acpi: Prevent out of bound access caused by broken ACPI tables
x86/mm, KVM: Fix warning when !CONFIG_PREEMPT_COUNT
x86/platform/uv/BAU: Fix congested_response_us not taking effect
x86/cpu: Use indirect call to measure performance in init_amd_k6()
Pull perf fixes from Ingo Molnar:
"Two hw-enablement patches, two race fixes, three fixes for regressions
of semantics, plus a number of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add proper condition to run sched_task callbacks
perf/core: Fix locking for children siblings group read
perf/core: Fix scheduling regression of pinned groups
perf/x86/intel: Fix debug_store reset field for freq events
perf/x86/intel: Add Goldmont Plus CPU PMU support
perf/x86/intel: Enable C-state residency events for Apollo Lake
perf symbols: Accept zero as the kernel base address
Revert "perf/core: Drop kernel samples even though :u is specified"
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
perf evsel: State in the default event name if attr.exclude_kernel is set
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
Pull core fixes from Ingo Molnar:
"A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debug: Fix WARN_ON_ONCE() for modules
MAINTAINERS: Update the PTRACE entry
Enable the TI SYSCON and TI-SCI reset drivers for Keystone
platforms. These drivers will provide the reset functionality
for devices like DSPs or PRU-ICSSs. There are no devices that
require these to be built-in, so these are enabled as modules.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable the TI-SCI core protocol and the corresponding genpd
driver to enable the essential infrastructure for various
device drivers on the 66AK2G family of SoCs. The TI-SCI Clock
driver is automatically enabled for ARCH_KEYSTONE.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add a reset-controller node for managing resets of various
remote processor devices on the SoC over the Texas Instrument's
System Control Interface (TI SCI) protocol.
Signed-off-by: Andrew F. Davis <afd@ti.com>
[s-anna@ti.com: rename node name, drop obsolete header]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add a ti-sci node representing the clock provider in the system.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Add a ti-sci k2g_pds node to act as our generic power domain provider
in the system.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is implemented in Keystone 2 generation 66AK2G SoC with the PMMC entity.
Add the ti-sci node representing this 66AK2G PMMC module.
Signed-off-by: Nishanth Menon <nm@ti.com>
[s-anna@ti.com: add unit address to DT node]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
xtensa's asm/device.h is a verbatim copy of asm-generic/device.h and
does not add any arch specific extensions. Thus, use the asm-generic
header directly.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa's asm/device.h is a verbatim copy of asm-generic/device.h and
does not add any arch specific extensions. Thus, use the asm-generic
header directly.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
On x86, 5-level paging enables 56-bit userspace virtual address space.
Not all user space is ready to handle wide addresses. It's known that
at least some JIT compilers use higher bits in pointers to encode their
information. It collides with valid pointers with 5-level paging and
leads to crashes.
To mitigate this, we are not going to allocate virtual address space
above 47-bit by default.
But userspace can ask for allocation from full address space by
specifying hint address (with or without MAP_FIXED) above 47-bits.
If hint address set above 47-bit, but MAP_FIXED is not specified, we try
to look for unmapped area by specified address. If it's already
occupied, we look for unmapped area in *full* address space, rather than
from 47-bit window.
A high hint address would only affect the allocation in question, but not
any future mmap()s.
Specifying high hint address on older kernel or on machine without 5-level
paging support is safe. The hint will be ignored and kernel will fall back
to allocation from 47-bit address space.
This approach helps to easily make application's memory allocator aware
about large address space without manually tracking allocated virtual
address space.
The patch puts all machinery in place, but not yet allows userspace to have
mappings above 47-bit -- TASK_SIZE_MAX has to be raised to get the effect.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170716225954.74185-7-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have 2 functions using the same sched_task callback:
- PEBS drain for free running counters
- LBR save/store
Both of them are called from intel_pmu_sched_task() and
either of them can be unwillingly triggered when the
other one is configured to run.
Let's say there's PEBS drain configured in sched_task
callback for the event, but in the callback itself
(intel_pmu_sched_task()) we will also run the code for
LBR save/restore, which we did not ask for, but the
code in intel_pmu_sched_task() does not check for that.
This can lead to extra cycles in some perf monitoring,
like when we monitor PEBS event without LBR data.
# perf record --no-timestamp -c 10000 -e cycles:p ./perf bench sched pipe -l 1000000
(We need PEBS, non freq/non timestamp event to enable
the sched_task callback)
The perf stat of cycles and msr:write_msr for above
command before the change:
...
Performance counter stats for './perf record --no-timestamp -c 10000 -e cycles:p \
./perf bench sched pipe -l 1000000' (5 runs):
18,519,557,441 cycles:k
91,195,527 msr:write_msr
29.334476406 seconds time elapsed
And after the change:
...
Performance counter stats for './perf record --no-timestamp -c 10000 -e cycles:p \
./perf bench sched pipe -l 1000000' (5 runs):
18,704,973,540 cycles:k
27,184,720 msr:write_msr
16.977875900 seconds time elapsed
There's no affect on cycles:k because the sched_task happens
with events switched off, however the msr:write_msr tracepoint
counter together with almost 50% of time speedup show the
improvement.
Monitoring LBR event and having extra PEBS drain processing
in sched_task callback showed just a little speedup, because
the drain function does not do much extra work in case there
is no PEBS data.
Adding conditions to recognize the configured work that needs
to be done in the x86_pmu's sched_task callback.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170719075247.GA27506@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The libretech CC derives less from the p212 than initially thought.
Several voltage regulators are different and the capabilities of the
sdcard and emmc also differ.
Deriving from the p212 is not convient anymore so the libretech is now
derived from s905x definition directly.
Fixes: cd84aff1d9 ("ARM64: dts: meson-gxl: Add Libre Technology CC support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Use the specific compatible for AO pwms so the pwms input can
be correctly set
FDIV4 is not present on the pwm A0, so change kadhas vim input
clocks to xtal.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.
No functional changes.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove old, dead Kconfig options (in order appearing in this commit):
- EXPERIMENTAL is gone since v3.9;
- INET_LRO: commit 7bbf3cae65 ("ipv4: Remove inet_lro library");
- AUTOFS_FS: commit 561c5cf923 ("staging: Remove autofs3");
- RCU_CPU_STALL_DETECTOR: commit a00e0d714f ("rcu: Remove conditional
compilation for RCU CPU stall warnings");
- USB_DEVICE_CLASS: commit 007bab9132 ("USB: remove
CONFIG_USB_DEVICE_CLASS");
- SYSCTL_SYSCALL_CHECK: commit 7c60c48f58 ("sysctl: Improve the
sysctl sanity checks");
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add hstate for each supported hugepage size using
arch initcall. This change fixes some hugepage
parameter parsing inconsistencies:
case 1: no hugepage parameters
Without hugepage parameters, only a hugepages-8192kB entry is visible
in sysfs. It's different from x86_64 where both 2M and 1G hugepage
sizes are available.
case 2: default_hugepagesz=[64K|256M|2G]
When specifying only a default_hugepagesz parameter, the default
hugepage size isn't really changed and it stays at 8M. This is again
different from x86_64.
Orabug: 25869946
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
They really are, and the "take the address of a single character" makes
the string fortification code unhappy (it believes that you can now only
acccess one byte, rather than a byte range, and then raises errors for
the memory copies going on in there).
We could now remove a few 'addressof' operators (since arrays naturally
degrade to pointers), but this is the minimal patch that just changes
the C prototypes of those template arrays (the templates themselves are
defined in inline asm).
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Acked-and-tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bluetooth is only supported when network support is part of the kernel,
so it is a bit pointless to build the hi1940-bt support without networking.
If we try anyway, we get a Kconfig warning:
warning: (TOSA_BT && H1940BT) selects RFKILL which has unmet direct dependencies (NET)
This turns the 'select' into 'depends on' as Krzysztof suggested when
I first sent a fix.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patchwork.kernel.org/patch/8164161/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
If the SynIC timer message delivery fails due to SINT message slot being
busy, there's no point to attempt starting the timer again until we're
notified of the slot being released by the guest (via EOM or EOI).
Even worse, when a oneshot timer fails to deliver its message, its
re-arming with an expiration time in the past leads to immediate retry
of the delivery, and so on, without ever letting the guest vcpu to run
and release the slot, which results in a livelock.
To avoid that, only start the timer when there's no timer message
pending delivery. When there is, meaning the slot is busy, the
processing will be restarted upon notification from the guest that the
slot is released.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it tries
to emulate invalid guest state task-switch:
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
kvm_entry: vcpu 0
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
......................
It appears that the task-switch emulation updates rflags (and vm86
flag) only after the segments are loaded, causing vmx->emulation_required
to be set, when in fact invalid guest state emulation is not needed.
This patch fixes it by updating vmx->emulation_required after the
rflags (and vm86 flag) is updated in task-switch emulation.
Thanks Radim for moving the update to vmx__set_flags and adding Paolo's
suggestion for the check.
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The way how default DMA pool is exposed has changed and now we need to
use dedicated interface to work with it. This patch makes alloc/release
operations to use such interface. Since, default DMA pool is not
handled by generic code anymore we have to implement our own mmap
operation.
Tested-by: Andras Szemzo <sza@esh.hu>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph noticed [1] that default DMA pool in current form overload
the DMA coherent infrastructure. In reply, Robin suggested [2] to
split the per-device vs. global pool interfaces, so allocation/release
from default DMA pool is driven by dma ops implementation.
This patch implements Robin's idea and provide interface to
allocate/release/mmap the default (aka global) DMA pool.
To make it clear that existing *_from_coherent routines work on
per-device pool rename them to *_from_dev_coherent.
[1] https://lkml.org/lkml/2017/7/7/370
[2] https://lkml.org/lkml/2017/7/7/431
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Andras Szemzo <sza@esh.hu>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Warnings:
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning
(unit_address_format): Node
/amba/spi@ff040000/spi0_flash0@0/spi0_flash0@00000000 unit name should
not have leading 0s
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning
(unit_address_format): Node
/amba/spi@ff050000/spi1_flash0@0/spi1_flash0@00000000 unit name should
not have leading 0s
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add the support for the MT7622 reference board variant 1 from
MediaTek.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
