Jonathan writes:
Second set of IIO new device support, features and cleanups for the 4.13 cycle.
A few reverts here. One was a general failure to notice a device was already
supported by another driver. The second is due to a review comment pointing
out that the original patch was a bad idea and would break existing systems.
Reverts
* bma180
- Revert addition of support for the BMA250E it is already supported by
the bmc150-accel and better supported at that. Oops.
* hi8435
- The fix for cleanup of the reset gpio stuff isn't a good way to go. It
breaks systems where an inverting level convertor is used. The right fix
is to make the original devicetree correct - even if it involves patching
the devicetree in kernel.
New Device Support
* stm32-adc
- STM32H7 support and bindings.
Features
* core
- add a hardware triggered operating mode for systems in which the actual
trigger is never seen by the kernel. This is typically only used when
a device 'can' use other triggers, but if a particular magic one is
enabled the interrupt is effectively handled in hardware and we never see
it.
* st-lsm6dsx
- support active low interrupts.
* stm32-adc
- Make the core adc clock optional as not all hardware supported requires it.
- Make the bus clock optional in the per instance driver as it may be shared
by all instances of the ADC and is handled by the core.
- Rework to have a data structure representing the device type specific
elements.
* stm32-trigger (and counter)
- Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
- Add an attribute to configure device modes for quadrature counting etc.
Clean ups and minor fixes
* IIO core.
- use __sysfs_match_string() helper rather than open coding the same.
* ad7791
- use sysfs_match_string() helper rather than open coding the same.
* aspeed-adc
- handle return value of clk_prepare_enable
* cpcap
- Fix default register values and ensure the battery thermistor is enabled
correctly.
- Fix the reported die temperature where we can - docs are lacking.
- Remove the hung interrupt quirk as no longer happens due to fix in the
mfd driver.
* hi8435
- Remove &s from hi8435_info definition as unneeded and inconsistent.
* hid-sensor-trgger
- Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
* ina2xx
- Make the use of iio_info_mask* elements consistent for all channels.
This doesn't have any visible effect, but acts as clear documentation of
which channels various resulting attributes apply to.
* lpc32xx
- handle the return value of clk_prepare_enable.
* meson-saradc
- NULL instead of 0 for pointer.
* mma9551
- use NULL for GPIO connection ID to aid implementation fo ACPI support.
Here the connection ID doesn't actually tell us anything and it is much
easier to deal with the driver if it's not there.
* mpu6050
- Fix lock issues through use of a local mux.
- Replace sprintf with scnprintf as appropriate.
- Check whoami against all known values. This allows for a small number of
boards where we are really fishing for the part not being present at all.
It is unfortunately common to have undescribed changes to use newer chips.
We paper over this but just emitting a warning for those cases as long as
we know about.
* mxs-lradc
- Fix some non static warnings.
* rcar-adc
- Part of making the naming for this part consistent across the kernel.
* st_accel
- drop some spi_device_id entries for variants with no SPI support
* st_magn
- drop some spi_device_id entries for variants with no SPI support.
* sx9500
- Use devm_gpiod_get instead of indexed value with an index of 0 on all
occasions.
* twl4030
- Drop unused twl4030_get_madc_conversion as callers removed now throughout
kernel.
- Unexport twl4030_madc_conversion() as no used only within this driver.
- Drop twl4030_madc_user_params as not used now.
- Drop twl4030_madc_request.func_cb as not used now.
- Fold the twl4030-madc.h header into the driver as no longer used anywhere
else in the kernel.
* xilinx
- Handle the return value of clk_prepare_enable
Kalle Valo says:
====================
wireless-drivers-next patches for 4.13
New features and bug fixes to quite a few different drivers, but
nothing really special standing out.
What makes me happy that we have now more vendors actively
contributing to upstream drivers. In this pull request we have patches
from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I
still have patches from Marvell and Quantenna pending in patchwork. Now
that's something comparing to how things looked 11 years ago in Jeff
Garzik's "State of the Union: Wireless" email:
https://lkml.org/lkml/2006/1/5/671
Major changes:
wil6210
* add low level RF sector interface via nl80211 vendor commands
* add module parameter ftm_mode to load separate firmware for factory
testing
* support devices with different PCIe bar size
* add support for PCIe D3hot in system suspend
* remove ioctl interface which should not be in a wireless driver
ath10k
* go back to using dma_alloc_coherent() for firmware scratch memory
* add per chain RSSI reporting
brcmfmac
* add support multi-scheduled scan
* add scheduled scan support for specified BSSIDs
* add support for brcm43430 revision 0
wlcore
* add wil1285 compatible
rsi
* add RS9113 USB support
iwlwifi
* FW API documentation improvements (for tools and htmldoc)
* continuing work for the new A000 family
* bump the maximum supported FW API to 31
* improve the differentiation between 8000, 9000 and A000 families
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A section talking about demod statistics implementation was
recently added, but it seemed to start from nowere, without
a previous description about how a demod driver would look
like.
Add such description, for completeness.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of just start describing the kAPI functions, add
an introduction giving a general line about a DVB driver's
structure.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
"cgroup.subtree_control" determines which resource types a cgroup
wants to control. Unlike actual resource knobs, this is an attribute
which belongs to the cgroup itself instead of its parent and thus
should be writeable by the delegatee in a delegated cgroup.
Update delegation documentation accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Documentation/kbuild/makefiles.txt says the change for align options
occurred at GCC 3.0, and Documentation/process/changes.rst says the
minimal supported GCC version is 3.2, so it should be safe to hard-code
-falign* options.
Fix the only user arch/x86/Makefile_32.cpu and remove cc-option-align.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Avoid the following warning when building documentation:
checking consistency... /devel/v4l/patchwork/Documentation/media/v4l-drivers/imx.rst:: WARNING: document isn't included in any toctree
While here, avoid placing all driver authors at just one line at
the html/pdf output.
Acked-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is not trivial to implement the logic that collects DVBv5
statistics. As we're seein lately too many implementations
that are not quite right when reviewing patchsets, add a
detailed explanation, adding a few examples about the right
thing to be done.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
I was reading the memory barries documentation in order to make sure the
RISC-V barries were correct, and I found a broken link to the atomic
operations documentation.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull GPIO fix from Linus Walleij:
"A single GPIO patch fixing the compatible string for the MVEBU PWM
controller embedded in the GPIO controller before we release v4.12.
Hopefully"
* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: change compatible string for PWM support
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There were a few bits and pieces left over from the now-disused DocBook
toolchain; git rid of them.
Reported-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This is probably the lamest patch ever, but then again "Welcome to The
Linux Kernel's documentation" is nearly equally lame. Really, we don't
need to "Welcome" people to the documentation, just tell them what the
site is about.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
...otherwise the PDF build fails when it can't find constraints.pdf.
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Two table problems caused the PDF build to fail:
- Evidently multirow cells are not appreciated in table headers,
so remove such from the "CS Rows" table.
- The logging message structure table was incorrectly formatted,
with two "+" instead of "|". The HTML build is forgiving of such
things, but PDF is not.
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 85c21e5c3e (docs-rst: better adjust margins and font size) added a
\usepackage{geometry} that conflicts with another inclusion deep within the
dependencies with newer versions of Sphinx, causing the the PDF build to fail
with a "conflicting parameters" error.
Detect the Sphinx version, using sphinxsetup for Sphinx versions 1.5 and
upper.
Fixes: 85c21e5c3e
[jc: Tweaked logic to exclude 1.5.x for x < 3 ]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Otherwise we get PDF build failures when LaTeX refused to acknowledge the
existence of \ifthenelse
Fixes: 41cff161fe
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
A number of Ethernet MACs have internal Ethernet PHYs and the internal
wiring makes it so that this knowledge needs to be available using the
standard 'phy-mode' property.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cavium ThunderX2 SMMU doesn't support MSI and also doesn't have unique irq
lines for gerror, eventq and cmdq-sync.
New named irq "combined" is set as a errata workaround, which allows to
share the irq line by register single irq handler for all the interrupts.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Geetha sowjanya <gakula@caviumnetworks.com>
[will: reworked irq equality checking and added SPI check]
Signed-off-by: Will Deacon <will.deacon@arm.com>
HiSilicon SMMUv3 on Hip06/Hip07 platforms doesn't support CMD_PREFETCH
command. The dt based support for this quirk is already present in the
driver(hisilicon,broken-prefetch-cmd). This adds ACPI support for the
quirk using the IORT smmu model number.
Signed-off-by: shameer <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: hanjun <guohanjun@huawei.com>
[will: rewrote patch]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cavium ThunderX2 SMMU implementation doesn't support page 1 register space
and PAGE0_REGS_ONLY option is enabled as an errata workaround.
This option when turned on, replaces all page 1 offsets used for
EVTQ_PROD/CONS, PRIQ_PROD/CONS register access with page 0 offsets.
SMMU resource size checks are now based on SMMU option PAGE0_REGS_ONLY,
since resource size can be either 64k/128k.
For this, arm_smmu_device_dt_probe/acpi_probe has been moved before
platform_get_resource call, so that SMMU options are set beforehand.
Signed-off-by: Linu Cherian <linu.cherian@cavium.com>
Signed-off-by: Geetha Sowjanya <geethasowjanya.akula@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull "bus: ARM CCN PMU driver updates" from Paweł Moll:
* Fixed missing module aliases, thus autoloading.
* Use appropriate (c)allocation function for arrays of structures.
* Add compatibility string (thus support) for CCN-502 variant.
* tag 'ccn/fixes-for-4.13-v2' of git://git.linaro.org/people/pawel.moll/linux:
bus: arm-ccn: Enable stats for CCN-502 interconnect
dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string
bus: arm-ccn: Use devm_kcalloc() in arm_ccn_probe()
bus: arm-ccn: Fix module autoload
Pull irqchip updates for v4.13 from Marc Zyngier
- support for the new Marvell wire-to-MSI bridge
- support for the Aspeed I2C irqchip
- Armada XP370 per-cpu interrupt fixes
- GICv3 ITS ACPI NUMA support
- sunxi-nmi cleanup and updates for new platform support
- various GICv3 ITS cleanups and fixes
- some constifying in various places
Unfortunately the use of 'type' was inconsistent for multiplanar
buffer types. Starting with 4.13 both the normal and _MPLANE variants
are allowed, thus making it possible to write sensible code.
Yes, we messed up :-(
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[hans.verkuil@cisco.com: 4.14 -> 4.13 since this would go in for 4.13 after all]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
audio-graph-scu-card can handle below connection which is mainly
for sound mixing purpose.
+----------+ +-------+
| CPU0--+--|-->| Codec |
| | | +-------+
| CPU1--+ |
+----------+
>From OF-graph point of view, it should have
CPU0 <-> Codec, and CPU1 <-> Codec on DT.
But current driver doesn't care about 2nd connection
of Codec, because it is dummy from DPCM point of view.
This patch can care 2nd Codec connection, and it should be
supported from OF-graph point of view.
It still have backward compatibility.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since 2015, the documentation for FE_DISEQC_SEND_BURST, FE_SET_TONE
and FE_SET_VOLTAGE are incorrectly saying that the enums are passed
by reference. They aren't: they're passed by value.
Fix the documentation to reflect reality.
Fixes: 81959d996a ("[media] DocBook: better document FE_DISEQC_SEND_BURST ioctl")
Fixes: d6b6d346e5 ("[media] DocBook: better document FE_SET_VOLTAGE ioctl")
Fixes: 6dc59e7a19 ("[media] DocBook: better document FE_SET_TONE ioctl")
Reported-by: Thierry Lelegard <thierry.lelegard@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit adds the Device Tree binding documentation for the Marvell
ICU interrupt controller, which collects wired interrupts from the
devices located into the CP110 hardware block of Marvell Armada 7K/8K,
and converts them into SPI interrupts in the GIC located in the AP
hardware block, using the GICP extension.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For RK3399's GRF module, if we want to operate the graphic related grf
registers, we need to enable the pclk_vio_grf which supply power for VIO
GRF IOs, so it's better to introduce an optional grf clock in driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
For RK3399 HDMI, there is an external clock need for HDMI PHY,
and it should keep the same clock rate with VOP DCLK.
VPLL have supported the clock for HDMI PHY, but there is no
clock divider bewteen VPLL and HDMI PHY. So we need to set the
VPLL rate manually in HDMI driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
RK3399 and RK3288 shared the same HDMI IP controller, only some light
difference with GRF configure.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
This randstruct plugin is modified from Brad Spengler/PaX Team's code
in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.
The randstruct GCC plugin randomizes the layout of selected structures
at compile time, as a probabilistic defense against attacks that need to
know the layout of structures within the kernel. This is most useful for
"in-house" kernel builds where neither the randomization seed nor other
build artifacts are made available to an attacker. While less useful for
distribution kernels (where the randomization seed must be exposed for
third party kernel module builds), it still has some value there since now
all kernel builds would need to be tracked by an attacker.
In more performance sensitive scenarios, GCC_PLUGIN_RANDSTRUCT_PERFORMANCE
can be selected to make a best effort to restrict randomization to
cacheline-sized groups of elements, and will not randomize bitfields. This
comes at the cost of reduced randomization.
Two annotations are defined,__randomize_layout and __no_randomize_layout,
which respectively tell the plugin to either randomize or not to
randomize instances of the struct in question. Follow-on patches enable
the auto-detection logic for selecting structures for randomization
that contain only function pointers. It is disabled here to assist with
bisection.
Since any randomized structs must be initialized using designated
initializers, __randomize_layout includes the __designated_init annotation
even when the plugin is disabled so that all builds will require
the needed initialization. (With the plugin enabled, annotations for
automatically chosen structures are marked as well.)
The main differences between this implemenation and grsecurity are:
- disable automatic struct selection (to be enabled in follow-up patch)
- add designated_init attribute at runtime and for manual marking
- clarify debugging output to differentiate bad cast warnings
- add whitelisting infrastructure
- support gcc 7's DECL_ALIGN and DECL_MODE changes (Laura Abbott)
- raise minimum required GCC version to 4.7
Earlier versions of this patch series were ported by Michael Leibowitz.
Signed-off-by: Kees Cook <keescook@chromium.org>
This reverts commit ab714817d7.
The original commit was designed to handle a bug in the trf7970a NFC
controller where an extra byte was returned in Read Multiple Blocks (RMB)
command responses. However, it has become less clear whether it is a bug
in the trf7970a or in the tag. In addition, it was assumed that the extra
byte was always returned but it turns out that is not always the case. The
result is that a byte of good data is trimmed off when the extra byte is
not present ultimately causing the neard deamon to fail the read.
Since the trf7970a driver does not have the context to know when to trim
the byte or not, remove the code from the trf7970a driver all together
(and move it up to the neard daemon). This has the added benefit of
simplifying the kernel driver and putting the extra complexity into
userspace.
CC: Rob Herring <robh@kernel.org>
CC: devicetree@vger.kernel.org
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Add bindings documentation for the CC board from Shenzhen Libre
Technology
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Shenzhen Libre Technology Co., Ltd is a single board computer
manufacturer
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Pull MFD fixes from Lee Jones:
- arizona: use address passed in, rather than hard coded value
- correct STM32 clock-names value in DT binding documentation
* tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: mfd: Update STM32 timers clock names
mfd: arizona: Fix typo using hard-coded register
Add the missing .txt extension to the Broadcom Northstar binding document.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit applies commit 388f9b20f9 ("Documentation/process/howto:
Only send regression fixes after -rc1") to Korean translation.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Another place in lib/Kconfig.debug was already fixed in commit f8998c2265
("lib/Kconfig.debug: correct documentation paths").
Fixes: 9d85025b04 ("docs-rst: create an user's manual book")
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
IBM Verse is a web UI around Lotus Domino mail servers (much like
the Lotus Notes client talks to Domino servers).
For various reasons, it is not at all suitable for kernel development,
all of which have been raised (repeatedly) internally.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The Devicetree Specification has superseded the ePAPR as the
base specification for bindings. Update files in Documentation
to reference the new document.
First reference to ePAPR in Documentation/devicetree/bindings/arm/cci.txt
is generic, remove it.
Some files are not updated because there is no hypervisor chapter
in the Devicetree Specification:
Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
Documenation/virtual/kvm/api.txt
Documenation/virtual/kvm/ppc-pv.txt
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
