Fix the following compile error:
.../bnxt.c: In function 'bnxt_cfg_ntp_filters':
.../bnxt.c:14077:37: error: implicit declaration of function 'rps_may_expire_flow' [-Werror=implicit-function-declaration]
14077 | if (rps_may_expire_flow(bp->dev, fltr->base.rxq,
| ^~~~~~~~~~~~~~~~~~~
bnxt_cfg_ntp_filters() is only used when CONFIG_RFS_ACCEL is enabled.
User configured ntuple filters are directly added and will not go through
this function. Wrap the body of bnxt_cfg_ntp_filters() with
CONFIG_RFS_ACCEL.
Fixes: 59cde76f33 ("bnxt_en: Refactor filter insertion logic in bnxt_rx_flow_steer().")
Reported-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/netdev/20240103102332.3642417-1-arnd@kernel.org/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().
Fixes: 1924136844 ("bnxt_en: Send PF driver unload notification to all VFs.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The flag DMA_TX_APPEND_CRC was only written to the first DMA descriptor
in the TX path, where each descriptor corresponds to a single skbuff
fragment (or the skbuff head). This led to packets with no FCS appearing
on the wire if the kernel allocated the packet in fragments, which would
always happen when using PACKET_MMAP/TPACKET (cf. tpacket_fill_skb() in
net/af_packet.c).
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Adrian Cinal <adriancinal1@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231228135638.1339245-1-adriancinal1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for adding user defined ntuple TCP/UDP filters. These
filters are similar to aRFS filters except that they don't get aged.
Source IP, destination IP, source port, or destination port can be
unspecifed as wildcard. At least one of these tuples must be specifed.
If a tuple is specified, the full mask must be specified.
All ntuple related ethtool functions are now no longer compiled only
for CONFIG_RFS_ACCEL.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
aRFS filters match all 5 tuples. User defined ntuple filters may
specify some of the tuples as wildcards. To support that, we add the
ntuple_flags to the bnxt_ntuple_filter struct to specify which tuple
fields are to be matched. The matching tuple fields will then be
passed to the firmware in bnxt_hwrm_cfa_ntuple_filter_alloc() to create
the proper filter.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor the logic into a new function bnxt_del_ntp_filters(). The
same call will be used when the user deletes an ntuple filter.
The bnxt_hwrm_cfa_ntuple_filter_free() function to call fw to free
the ntuple filter is exported so that the ethtool logic can call it.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new function bnxt_insert_ntp_filter() to insert the ntuple filter
into the hash table and other basic setup. We'll use this function
to insert a user defined filter from ethtool.
Also, export bnxt_lookup_ntp_filter_from_idx() and bnxt_get_ntp_filter_idx()
for similar purposes. All ntuple related functions are now no longer
compiled only for CONFIG_RFS_ACCEL
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the unused flag to BNXT_FLTR_INSERTED. To prepare for multiple
pathways that an ntuple filter can be deleted, we add this flag. These
filter structures can be retreived from the RCU hash table but only
the caller that sees that the BNXT_FLTR_INSERTED flag is set can delete
the filter structure and clear the flag under spinlock.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the helper function to look up the ntuple filter from the
hash index and use it in bnxt_rx_flow_steer(). The helper function
will also be used by user defined ntuple filters in the next
patches.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For ntuple filters added by aRFS, the Toeplitz hash calculated by our
NIC is available and is used to store the ntuple filter for quick
retrieval. In the next patches, user defined ntuple filter support
will be added and we need to calculate the same hash for these
filters. The same hash function needs to be used so we can detect
duplicates.
Add the function bnxt_toeplitz() to calculate the Toeplitz hash for
user defined ntuple filters. bnxt_toeplitz() uses the same Toeplitz
key and the same key length as the NIC.
bnxt_get_ntp_filter_idx() is added to return the hash index. For
aRFS, the hash comes from the NIC. For user defined ntuple, we call
bnxt_toeplitz() to calculate the hash index.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the new bnxt_l2_filter structure, we can now re-structure the
bnxt_ntuple_filter structure to point to the bnxt_l2_filter structure.
We eliminate the L2 ether address info from the ntuple filter structure
as we can get the information from the L2 filter structure. Note that
the source L2 MAC address is no longer used.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current driver only has an array of 4 additional L2 unicast
addresses to support the netdev uc address list. Generalize and
expand this infrastructure with an L2 address hash table so we can
support an expanded list of unicast addresses (for bridges,
macvlans, OVS, etc). The L2 hash table infrastructure will also
allow more generalized n-tuple filter support.
This patch creates the bnxt_l2_filter structure and the hash table.
This L2 filter structure has the same bnxt_filter_base structure
as used in the bnxt_ntuple_filter structure.
All currently supported L2 filters will now have an entry in this
new table.
Note that L2 filters may be created for the VF. VF filters should
not be freed when the PF goes down. Add some logic in
bnxt_free_l2_filters() to allow keeping the VF filters or to free
everything during rmmod.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a busy network, especially with flow control enabled, we may
experience timestamp query failures fairly regularly. After a while,
dmesg may be flooded with timestamp query failure error messages.
Silence the error message from the low level hwrm function that
sends the firmware message. Change netdev_err() to netdev_WARN_ONCE()
if this FW call ever fails.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-14-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the new P7 chips, TPA for tunnel packets can be independently
enabled for each VNIC. The default TPA configuration should not
include UDP tunnels because the UDP ports for these tunnels are not
known yet. The chip should not aggregate these UDP tunneled packets
using default UDP ports until the ports are known.
Add a new function bnxt_hwrm_vnic_update_tunl_tpa() to enable VXLAN
and Geneve TPA if the corresponding UDP ports are known.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TX coalesced completions are supported on newer chips to provide
one TX completion record for multiple TX packets up to the
sq_cons_idx in the completion record. This method saves PCIe
bandwidth by reducing the number of TX completions.
Only very minor changes are now required to support this mode
with the new framework that handles TX completions based on
the consumer indices.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
_bnxt_get_max_rings() that is invoked in bnxt_check_rings() already
accounts for the AGG ring(s) and gives a max value based on that.
Increasing for AGG rings before calling _bnxt_get_max_rings() will
result in checking for twice the number of rings than required and
it can fail. Fix it by adjusting for AGG rings after calling
_bnxt_get_max_rings().
Fixes: f5b29c6afe ("bnxt_en: Add helper to get the number of CP rings required for TX rings")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The recent commit to trim the RX and TX rings on P5 chips by assigning
each with max CP rings divided by 2 is not correct. Max CP rings
divided by 2 may be bigger than the original RX or TX and would
lead to failure. In other words, we may be checking for increased
RX/TX rings than required and it may fail.
Fix it by calling __bnxt_trim_rings() instead that would properly
trim RX and TX without the possibility of increasing their values.
Fixes: f5b29c6afe ("bnxt_en: Add helper to get the number of CP rings required for TX rings")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the chip is configured to timestamp all receive packets, the
timestamp in the RX completion is only valid if the metadata
present flag is not set for packets received on the wire. In
addition, internal loopback packets will never have a valid timestamp
and the timestamp field will always be zero. We must exclude
any 0 value in the timestamp field because there is no way to
determine if it is a loopback packet or not.
Add a new function bnxt_rx_ts_valid() to check for all timestamp
valid conditions.
Fixes: 66ed81dced ("bnxt_en: Enable packet timestamping for all RX packets")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wait_event_interruptible_timeout() function returns 0
if the timeout elapsed, -ERESTARTSYS if it was interrupted
by a signal, and the remaining jiffies otherwise if the
condition evaluated to true before the timeout elapsed.
Driver should have checked for zero return value instead of
a positive value.
MChan: Print a warning for -ERESTARTSYS. The close operation
will proceed anyway when wait_event_interruptible_timeout()
returns for any reason. Since we do the close no matter what,
we should not return this error code to the caller. Change
bnxt_close_nic() to a void function and remove all error
handling from some of the callers.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
