When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist
yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as
the connector type.
However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the
connector type.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
fix merge conflict and drop duplicated patch description.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Fix a wrong error checking in exynos_drm_dma.c module.
In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.
However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.
This issue[1] was reported by Dan.
Changelog v1:
- fix build warning.
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Reported-by : Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The variable crtc->state->event is often protected by the lock
crtc->dev->event_lock when is accessed. However, it is accessed as a
condition of an if statement in exynos_drm_crtc_atomic_disable() without
holding the lock:
if (crtc->state->event && !crtc->state->active)
However, if crtc->state->event is changed to NULL by another thread right
after the conditions of the if statement is checked to be true, a
null-pointer dereference can occur in drm_crtc_send_vblank_event():
e->pipe = pipe;
To fix this possible null-pointer dereference caused by data race, the
spin lock coverage is extended to protect the if statement as well as the
function call to drm_crtc_send_vblank_event().
Reported-by: BassCheck <bass@buaa.edu.cn>
Link: https://sites.google.com/view/basscheck/home
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Added relevant link.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
Backmerging into drm-misc-next to get commit 2c1c7ba457
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702 ("drm: Remove struct drm_driver.gem_prime_mmap").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
The empty stub functions are defined as global functions, which
causes a warning because of missing prototypes:
drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'
Mark them as 'static inline' to avoid the warning and to make
them behave as intended.
Fixes: eb4d9796fa ("drm/exynos: g2d: Convert to driver component API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to exynos_fbdev_setup() after exynos has registered its
DRM device. As in most drivers, exynos' fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within exynos. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The DRM device stores a pointer to the fbdev helper. Remove struct
exynos_drm_private.fb_helper, which contains the same value. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Remove struct exynos_drm_fbdev, which is an empty wrapper around
struct drm_fb_helper. Use the latter directly. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fbdev's framebuffer stores a pointer to the GEM object. Remove
struct exynos_drm_fbdev.exynos_gem, which contains the same value.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Samsung MIPI DSIM controller is common DSI IP that can be used in various
SoCs like Exynos, i.MX8M Mini/Nano.
In order to access this DSI controller between various platform SoCs,
the ideal way to incorporate this in the drm stack is via the drm bridge
driver.
We already have a consolidated code for supporting component and bridge
based DRM drivers, so keep the exynos component based code in existing
exynos_drm_dsi.c and move generic bridge code as part of samsung-dsim.c
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
IRQ handler for te-gpio seems to be common across DSIM host.
However, Exynos is handling this via CRTC drivers but there is no clear
evidence on how the same has been handled in i.MX8MM. Keeping the handler
as-it-is can be a viable option but adding DSIM bridge core in upcoming
patches is not possible to call Exynos CRTC handler as DSIM bridge has
to be common across DRM bridge core instead of platform specific DRM
drivers like Exynos here.
So, this patch handles the handler via platform host helper, so-that
handling platform specific hook across Exynos and generic can be
reasonable till it makes it generic across all platforms.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSI host registration, attach and detach operations are quite
different for the component and bridge-based DRM drivers.
Supporting generic bridge driver to use both component and bridge
based DRM drivers can be tricky and would require additional host
related operation hooks.
Add host operation hooks for registering and unregistering Exynos
and generic drivers, where Exynos hooks are used in existing Exynos
component based DRM drivers and generic hooks are used in i.MX8M
bridge based DRM drivers.
Add host attach and detach operation hooks for Exynos component
DRM drivers and those get invoked while DSI core host attach and
detach gets called.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Finding the right input bus format throughout the pipeline is hard
so add atomic_get_input_bus_fmts callback and initialize with the
proper input format from list of supported output formats.
This format can be used in pipeline for negotiating bus format between
the DSI-end of this bridge and the other component closer to pipeline
components.
List of Pixel formats are taken from,
AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
3.7.4 Pixel formats
Table 14. DSI pixel packing formats
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
active low (DE_LOW). This makes the valid data transfer on each
horizontal line.
So, add additional bus flags DE_LOW setting via input_bus_flags
for i.MX8M Mini/Nano platforms.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Look like an explicit fixing up of mode_flags is required for DSIM IP
present in i.MX8M Mini/Nano SoCs.
At least the LCDIF + DSIM needs active low sync polarities in order
to correlate the correct sync flags of the surrounding components in
the chain to make sure the whole pipeline can work properly.
On the other hand the i.MX 8M Mini Applications Processor Reference Manual,
Rev. 3, 11/2020 says.
"13.6.3.5.2 RGB interface
Vsync, Hsync, and VDEN are active high signals."
i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
3.6.3.5.2 RGB interface
i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
13.6.2.7.2 RGB interface
both claim "Vsync, Hsync, and VDEN are active high signals.", the
LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
No clear evidence about whether it can be documentation issues or
something, so added proper comments on the code.
Comments are suggested by Marek Vasut.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Host transfer() in the DSI master will invoke only when the DSI commands
are sent from DSI devices like DSI Panel or DSI bridges and this host
the transfer wouldn't invoke for I2C-based-DSI bridge drivers.
Handling DSI host initialization in transfer calls misses the controller
setup for I2C configured DSI bridges.
This patch updates the DSI host initialization by calling host to init
from bridge pre_enable as the bridge pre_enable API is invoked by core
as it is common across all classes of DSI device drivers.
The host init during pre_enable is conditional and not invoked for Exynos
as existing downstream drm panels and bridges in Exynos are expecting
the host initialization during DSI transfer.
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Samsung MIPI DSIM controller is common DSI IP that can be used
in various SoCs like Exynos, i.MX8M Mini/Nano/Plus.
Add hw_type enum via platform_data so that accessing the different
controller data between various platforms becomes easy and meaningful.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The same Samsung MIPI DSIM master can also be used in NXP's
i.MX8M Mini/Nano/Plus SoC.
In i.MX8M Mini/Nano/Plus SoC the DSI Phy requires a MIPI DPHY
bit to reset in order to activate the PHY and that can be done
via upstream i.MX8M blk-ctrl driver.
So, mark the phy get as optional.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In general, for MIPI DSI there are three ways to represent the
pipeline for an upstream bridge to find the connected downstream
panel or bridge.
1. Child panel or bridge as a conventional device tree child node.
2. Child panel or bridge as an OF-graph port node.
3. Child panel or bridge as an OF-graph ports node.
There are three different downstream panels or bridges that are
possible to connect an upstream DSI host bridge - DSI Panel,
DSI Bridge, and I2C-Configured DSI bridge.
An example of the downstream panel represented as a child node,
&dsi {
compatible = "samsung,exynos5433-mipi-dsi";
ports {
port@0 {
reg = <0>;
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
};
};
panel@0 {
reg = <0>;
};
};
An example of the downstream bridge represented as a port node,
&i2c4 {
bridge@2c {
compatible = "ti,sn65dsi84";
ports {
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
data-lanes = <1 2>;
};
};
port@2 {
reg = <2>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
port {
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
dsi_out_bridge: endpoint@1 {
reg = <1>;
remote-endpoint = <&bridge_in_dsi>;
};
};
};
An example of the downstream bridge represented as a ports node,
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
ports {
port@0 {
reg = <0>;
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out_bridge: endpoint {
remote-endpoint = <&bridge_in_dsi>;
};
};
};
In, summary it is possible to represent all three downstream slaves
devices using OF-graph port or ports node however only DSI Panel and
DSI Bridge are possible but not possible to represent I2C-Configured
DSI bridge child nodes since I2C-Configure bridges are child of I2C
node, not upstream DSI host bridge and it is must represent them
endpoint port linking.
This indeed means, the OF-graph port or ports representation is
mandatory for I2C-Configured DSI bridges.
This patch tries to add an OF-graph port or ports representation
detection code on top of existing child node detection.
It is possible to replace the entire detection code using existing
drm_of helper drm_of_find_panel_or_bridge but it will break the
Exynos DSI since the pipeline doesn't support OF-graph port or ports
node.
Overall, this patch has a combination of child and OF-graph pipeline
detections in order to support the backward compatibility of Exynos
DSI child node and i.MX8M Mini/Nano/Plus OF-graph port or ports
node pipelines.
This is the first common DSI host bridge driver that needs to support
all possible downstream connection pipeline combinations.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos DSI already converted into a bridge driver, so bridge
detach will suppose happened during bridge chain removal done
by the bridge core.
Drop the explicit call chain to detach the bridge.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the
calling fbdev implementation. Avoids a possible stale mutex with
generic fbdev code.
As indicated by its name, drm_fb_helper_prepare() prepares struct
drm_fb_helper before setting up the fbdev support with a call to
drm_fb_helper_init(). In legacy fbdev emulation, this happens next
to each other. If successful, drm_fb_helper_fini() later tear down
the fbdev device and also unprepare via drm_fb_helper_unprepare().
Generic fbdev emulation prepares struct drm_fb_helper immediately
after allocating the instance. It only calls drm_fb_helper_init()
as part of processing a hotplug event. If the hotplug-handling fails,
it runs drm_fb_helper_fini(). This unprepares the fb-helper instance
and the next hotplug event runs on stale data.
Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini()
into the fbdev implementations. Call it right before freeing the
fb-helper instance.
Fixes: 643231b283 ("drm/fbdev-generic: Minimize hotplug error handling")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
One fixup series
- Make sure to restore bridge chain order by enabling the drm panel
prepare_prev_first flag of the bridge and panel drivers - tc358764 display
bridge device and Samsung s6e3ha2/s6e63j0x03/s6e8aa0 panel devices.
In case of any boards using Exynos5433 SoC, below Display pipeline could be
configured.
Decon -> MIC -> MIPI-DSI -> Panel
So, this patch series makes sure to enable previous bridge device before
enabling MIPI-DSI device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130051055.15340-1-inki.dae@samsung.com
Initialize the fb-helper's preferred_bpp field early from within
drm_fb_helper_prepare(); instead of the later client hot-plugging
callback. This simplifies the generic fbdev setup function.
No real changes, but all drivers' fbdev code has to be adapted.
v3:
* build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
