module_assert_mutex_or_preempt() is not needed in find_symbol(). The
function checks for RCU-sched or the module_mutex to be acquired. The
list_for_each_entry_rcu() below does the same check.
Remove module_assert_mutex_or_preempt() from try_add_tainted_module().
Use RCU protection to invoke find_symbol() and update callers.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108090457.512198-11-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The modules list and module::kallsyms can be accessed under RCU
assumption.
Use rcu_dereference() to reference the kallsyms pointer in
find_kallsyms_symbol(). Use a RCU section instead of preempt_disable in
callers of find_kallsyms_symbol(). Keep the preempt-disable in
module_address_lookup() due to __module_address().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108090457.512198-5-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
add_kallsyms() assigns the RCU pointer module::kallsyms and setups the
structures behind it which point to init-data. The module was not
published yet, nothing can see the kallsyms pointer and the data behind
it. Also module's init function was not yet invoked.
There is no need to use rcu_dereference() here, it is just to keep
checkers quiet. The whole RCU read section is also not needed.
Use a local kallsyms pointer and setup the data structures. Assign that
pointer to the data structure at the end via rcu_assign_pointer().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108090457.512198-4-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The RCU usage in module was introduced in commit d72b37513c ("Remove
stop_machine during module load v2") and it claimed not to be RCU but
similar. Then there was another improvement in commit e91defa26c
("module: don't use stop_machine on module load"). It become a mix of
RCU and RCU-sched and was eventually fixed 0be964be0d ("module:
Sanitize RCU usage and locking"). Later RCU & RCU-sched was merged in
commit cb2f55369d ("modules: Replace synchronize_sched() and
call_rcu_sched()") so that was aligned.
Looking at it today, there is still leftovers. The preempt_disable() was
used instead rcu_read_lock_sched(). The RCU & RCU-sched merge was not
complete as there is still rcu_dereference_sched() for module::kallsyms.
The RCU-list modules and unloaded_tainted_modules are always accessed
under RCU protection or the module_mutex. The modules list iteration can
always happen safely because the module will not disappear.
Once the module is removed (free_module()) then after removing the
module from the list, there is a synchronize_rcu() which waits until
every RCU reader left the section. That means iterating over the list
within a RCU-read section is enough, there is no need to disable
preemption. module::kallsyms is first assigned in add_kallsyms() before
the module is added to the list. At this point, it points to init data.
This pointer is later updated and before the init code is removed there
is also synchronize_rcu() in do_free_init(). That means A RCU read lock
is enough for protection and rcu_dereference() can be safely used.
Convert module code and its users step by step. Update comments and
convert print_modules() to use RCU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250108090457.512198-3-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Pull perf event fixes from Ingo Molnar:
"Fix a race between PMU registration and event creation, and fix
pmus_lock vs. pmus_srcu lock ordering"
* tag 'perf-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix perf_pmu_register() vs. perf_init_event()
perf/core: Fix pmus_lock vs. pmus_srcu ordering
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq.
This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list,
making the conversion invalid and potentially leading to memory
corruption. Depending on the relative positions of leaf_cfs_rq_list and
the task group (tg) pointer within the struct, this can cause a memory
fault or access garbage data.
The issue arises in list_add_leaf_cfs_rq, where both
cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same
leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list.
This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main
conditional in child_cfs_rq_on_list. This ensures that the container_of
operation will convert a correct cfs_rq struct.
This check is sufficient because only cfs_rqs on the same CPU are added
to the list, so verifying the 'prev' pointer against the current rq's list
head is enough.
Fixes a potential memory corruption issue that due to current struct
layout might not be manifesting as a crash but could lead to unpredictable
behavior when the layout changes.
Fixes: fdaba61ef8 ("sched/fair: Ensure that the CFS parent is added after unthrottling")
Signed-off-by: Zecheng Li <zecheng@google.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250304214031.2882646-1-zecheng@google.com
Pull probe events fixes from Masami Hiramatsu:
- probe-events: Remove unused MAX_ARG_BUF_LEN macro - it is not used
- fprobe-events: Log error for exceeding the number of entry args.
Since the max number of entry args is limited, it should be checked
and rejected when the parser detects it.
- tprobe-events: Reject invalid tracepoint name
If a user specifies an invalid tracepoint name (e.g. including '/')
then the new event is not defined correctly in the eventfs.
- tprobe-events: Fix a memory leak when tprobe defined with $retval
There is a memory leak if tprobe is defined with $retval.
* tag 'probes-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Remove unused MAX_ARG_BUF_LEN macro
tracing: fprobe-events: Log error for exceeding the number of entry args
tracing: tprobe-events: Reject invalid tracepoint name
tracing: tprobe-events: Fix a memory leak when tprobe with $retval
There is a fairly obvious race between perf_init_event() doing
idr_find() and perf_pmu_register() doing idr_alloc() with an
incompletely initialized PMU pointer.
Avoid by doing idr_alloc() on a NULL pointer to register the id, and
swizzling the real struct pmu pointer at the end using idr_replace().
Also making sure to not set struct pmu members after publishing
the struct pmu, duh.
[ introduce idr_cmpxchg() in order to better handle the idr_replace()
error case -- if it were to return an unexpected pointer, it will
already have replaced the value and there is no going back. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.858805880@infradead.org
Commit a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
placed pmus_lock inside pmus_srcu, this makes perf_pmu_unregister()
trip lockdep.
Move the locking about such that only pmu_idr and pmus (list) are
modified while holding pmus_lock. This avoids doing synchronize_srcu()
while holding pmus_lock and all is well again.
Fixes: a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.679556858@infradead.org
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
Pull scheduler fix from Ingo Molnar:
"Prevent cond_resched() based preemption when interrupts are disabled,
on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels"
* tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Prevent rescheduling when interrupts are disabled
Pull perf event fixes from Ingo Molnar:
"Miscellaneous perf events fixes and a minor HW enablement change:
- Fix missing RCU protection in perf_iterate_ctx()
- Fix pmu_ctx_list ordering bug
- Reject the zero page in uprobes
- Fix a family of bugs related to low frequency sampling
- Add Intel Arrow Lake U CPUs to the generic Arrow Lake RAPL support
table
- Fix a lockdep-assert false positive in uretprobes"
* tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()
perf/x86/rapl: Add support for Intel Arrow Lake U
perf/x86/intel: Use better start period for frequency mode
perf/core: Fix low freq setting via IOC_PERIOD
perf/x86: Fix low freqency setting issue
uprobes: Reject the shared zeropage in uprobe_write_opcode()
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
perf/core: Add RCU read lock protection to perf_iterate_ctx()
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Commit 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on
future loaded modules") allows user to set a tprobe on non-exist
tracepoint but it does not check the tracepoint name is acceptable.
So it leads tprobe has a wrong character for events (e.g. with
subsystem prefix). In this case, the event is not shown in the
events directory.
Reject such invalid tracepoint name.
The tracepoint name must consist of alphabet or digit or '_'.
Link: https://lore.kernel.org/all/174055073461.4079315.15875502830565214255.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Pull workqueue update from Tejun Heo:
"This contains a patch improve debug visibility.
While it isn't a fix, the change carries virtually no risk and makes
it substantially easier to chase down a class of problems"
* tag 'wq-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Log additional details when rejecting work
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
hprobe_expire() is used to atomically switch pending uretprobe instance
(struct return_instance) from being SRCU protected to be refcounted.
This can be done from background timer thread, or synchronously within
current thread when task is forked.
In the former case, return_instance has to be protected through RCU read
lock, and that's what hprobe_expire() used to check with
lockdep_assert(rcu_read_lock_held()).
But in the latter case (hprobe_expire() called from dup_utask()) there
is no RCU lock being held, and it's both unnecessary and incovenient.
Inconvenient due to the intervening memory allocations inside
dup_return_instance()'s loop. Unnecessary because dup_utask() is called
synchronously in current thread, and no uretprobe can run at that point,
so return_instance can't be freed either.
So drop rcu_read_lock_held() condition, and expand corresponding comment
to explain necessary lifetime guarantees. lockdep_assert()-detected
issue is a false positive.
Fixes: dd1a756778 ("uprobes: SRCU-protect uretprobe lifetime (with timeout)")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250225223214.2970740-1-andrii@kernel.org
a6250aa251 ("sched_ext: Handle cases where pick_task_scx() is called
without preceding balance_scx()") added a workaround to handle the cases
where pick_task_scx() is called without prececing balance_scx() which is due
to a fair class bug where pick_taks_fair() may return NULL after a true
return from balance_fair().
The workaround detects when pick_task_scx() is called without preceding
balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid
stalling. Unfortunately, the workaround code was testing whether @prev was
on SCX to decide whether to keep the task running. This is incorrect as the
task may be on SCX but no longer runnable.
This could lead to a non-runnable task to be returned from pick_task_scx()
which cause interesting confusions and failures. e.g. A common failure mode
is the task ending up with (!on_rq && on_cpu) state which can cause
potential wakers to busy loop, which can easily lead to deadlocks.
Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes
@prev_on_scx only used in one place. Open code the usage and improve the
comment while at it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pat Cody <patcody@meta.com>
Fixes: a6250aa251 ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ]
Fixes: 7396fa818d ("uprobes/core: Make background page replacement logic account for rss_stat counters")
Fixes: 2b14449835 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250224031149.1598949-1-tongtiangen@huawei.com
Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in
perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same
perf_event_pmu_context, but not in the same order.
The problem is that the order of pmu_ctx_list for the parent is impacted by
the time when an event/PMU is added. While the order for a child is
impacted by the event order in the pinned_groups and flexible_groups. So
the order of pmu_ctx_list in the parent and child may be different.
To fix this problem, insert the perf_event_pmu_context to its proper place
after iteration of the pmu_ctx_list.
The follow testcase can trigger above warning:
# perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out &
# perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out
test.c
void main() {
int count = 0;
pid_t pid;
printf("%d running\n", getpid());
sleep(30);
printf("running\n");
pid = fork();
if (pid == -1) {
printf("fork error\n");
return;
}
if (pid == 0) {
while (1) {
count++;
}
} else {
while (1) {
count++;
}
}
}
The testcase first opens an LBR event, so it will allocate task_ctx_data,
and then open tracepoint and software events, so the parent context will
have 3 different perf_event_pmu_contexts. On inheritance, child ctx will
insert the perf_event_pmu_context in another order and the warning will
trigger.
[ mingo: Tidied up the changelog. ]
Fixes: bd27568117 ("perf: Rewrite core context handling")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250122073356.1824736-1-luogengkun@huaweicloud.com
The perf_iterate_ctx() function performs RCU list traversal but
currently lacks RCU read lock protection. This causes lockdep warnings
when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y:
WARNING: suspicious RCU usage
kernel/events/core.c:8168 RCU-list traversed in non-reader section!!
Call Trace:
lockdep_rcu_suspicious
? perf_event_addr_filters_apply
perf_iterate_ctx
perf_event_exec
begin_new_exec
? load_elf_phdrs
load_elf_binary
? lock_acquire
? find_held_lock
? bprm_execve
bprm_execve
do_execveat_common.isra.0
__x64_sys_execve
do_syscall_64
entry_SYSCALL_64_after_hwframe
This protection was previously present but was removed in commit
bd27568117 ("perf: Rewrite core context handling"). Add back the
necessary rcu_read_lock()/rcu_read_unlock() pair around
perf_iterate_ctx() call in perf_event_exec().
[ mingo: Use scoped_guard() as suggested by Peter ]
Fixes: bd27568117 ("perf: Rewrite core context handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117-fix_perf_rcu-v1-1-13cb9210fc6a@debian.org
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
Pull perf event fixes from Ingo Molnar:
"Fix x86 Intel Lion Cove CPU event constraints, and fix uprobes
debug/error printk output pointer-value verbosity"
* tag 'perf-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix event constraints for LNC
uprobes: Don't use %pK through printk
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, lots of small things all over, msm has
a bunch of things but all very small, xe, i915, a fix for the cgroup
dmem controller.
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not
present
- fix the setting of WB mask to ensure the WB input control is
programmed correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any
3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus
(2ppc) to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this
was causing kms_writeback failure due to resource sharing
between WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and
fix uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when
programming the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy
timeout
- Only print GMU fw version once, instead of each time the GPU
resumes"
* tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode
drm/i915/dp: Fix error handling during 128b/132b link training
accel/amdxdna: Add missing include linux/slab.h
MAINTAINERS: Remove myself
drm/nouveau/pmu: Fix gp10b firmware guard
cgroup/dmem: Don't open-code css_for_each_descendant_pre
drm/xe/guc: Fix size_t print format
drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump
drm/i915: Make sure all planes in use by the joiner have their crtc included
drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL
drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro
drm/xe: Fix error handling in xe_irq_install()
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side
drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields
drm/msm/dpu: Disable dither in phys encoder cleanup
drm/msm/dpu: Fix uninitialized variable
...
kmemleak reports the following memory leak after reading set_event file:
# cat /sys/kernel/tracing/set_event
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff110001234449e0 (size 16):
comm "cat", pid 13645, jiffies 4294981880
hex dump (first 16 bytes):
01 00 00 00 00 00 00 00 a8 71 e7 84 ff ff ff ff .........q......
backtrace (crc c43abbc):
__kmalloc_cache_noprof+0x3ca/0x4b0
s_start+0x72/0x2d0
seq_read_iter+0x265/0x1080
seq_read+0x2c9/0x420
vfs_read+0x166/0xc30
ksys_read+0xf4/0x1d0
do_syscall_64+0x79/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The issue can be reproduced regardless of whether set_event is empty or
not. Here is an example about the valid content of set_event.
# cat /sys/kernel/tracing/set_event
sched:sched_process_fork
sched:sched_switch
sched:sched_wakeup
*:*:mod:trace_events_sample
The root cause is that s_next() returns NULL when nothing is found.
This results in s_stop() attempting to free a NULL pointer because its
parameter is NULL.
Fix the issue by freeing the memory appropriately when s_next() fails
to find anything.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250220031528.7373-1-ahuang12@lenovo.com
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function tracer should record the preemption level at the point when
the function is invoked. If the tracing subsystem decrement the
preemption counter it needs to correct this before feeding the data into
the trace buffer. This was broken in the commit cited below while
shifting the preempt-disabled section.
Use tracing_gen_ctx_dec() which properly subtracts one from the
preemption counter on a preemptible kernel.
Cc: stable@vger.kernel.org
Cc: Wander Lairson Costa <wander@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20250220140749.pfw8qoNZ@linutronix.de
Fixes: ce5e48036c ("ftrace: disable preemption when recursion locked")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When adding a new fprobe, it will update the function hash to the
functions the fprobe is attached to and register with function graph to
have it call the registered functions. The fprobe_graph_active variable
keeps track of the number of fprobes that are using function graph.
If two fprobes attach to the same function, it increments the
fprobe_graph_active for each of them. But when they are removed, the first
fprobe to be removed will see that the function it is attached to is also
used by another fprobe and it will not remove that function from
function_graph. The logic will skip decrementing the fprobe_graph_active
variable.
This causes the fprobe_graph_active variable to not go to zero when all
fprobes are removed, and in doing so it does not unregister from
function graph. As the fgraph ops hash will now be empty, and an empty
filter hash means all functions are enabled, this triggers function graph
to add a callback to the fprobe infrastructure for every function!
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# echo "f:myevent2 kernel_clone%return" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0024000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# > /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
try_to_run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
cleanup_rapl_pmus (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_free_pcibus_map (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_types_exit (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
kvm_shutdown (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
vmx_dump_msrs (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
[..]
# cat /sys/kernel/tracing/enabled_functions | wc -l
54702
If a fprobe is being removed and all its functions are also traced by
other fprobes, still decrement the fprobe_graph_active counter.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.565129766@goodmis.org
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Closes: https://lore.kernel.org/all/20250217114918.10397-A-hca@linux.ibm.com/
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the last fprobe is removed, it calls unregister_ftrace_graph() to
remove the graph_ops from function graph. The issue is when it does so, it
calls return before removing the function from its graph ops via
ftrace_set_filter_ips(). This leaves the last function lingering in the
fprobe's fgraph ops and if a probe is added it also enables that last
function (even though the callback will just drop it, it does add unneeded
overhead to make that call).
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
schedule_timeout (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# > /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
# echo "f:myevent3 kmem_cache_free" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kmem_cache_free (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
schedule_timeout (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
The above enabled a fprobe on kernel_clone, and then on schedule_timeout.
The content of the enabled_functions shows the functions that have a
callback attached to them. The fprobe attached to those functions
properly. Then the fprobes were cleared, and enabled_functions was empty
after that. But after adding a fprobe on kmem_cache_free, the
enabled_functions shows that the schedule_timeout was attached again. This
is because it was still left in the fprobe ops that is used to tell
function graph what functions it wants callbacks from.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.393254452@goodmis.org
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Function graph uses a subops and manager ops mechanism to attach to
ftrace. The manager ops connects to ftrace and the functions it connects
to is defined by a list of subops that it manages.
The function hash that defines what the above ops attaches to limits the
functions to attach if the hash has any content. If the hash is empty, it
means to trace all functions.
The creation of the manager ops hash is done by iterating over all the
subops hashes. If any of the subops hashes is empty, it means that the
manager ops hash must trace all functions as well.
The issue is in the creation of the manager ops. When a second subops is
attached, a new hash is created by starting it as NULL and adding the
subops one at a time. But the NULL ops is mistaken as an empty hash, and
once an empty hash is found, it stops the loop of subops and just enables
all functions.
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
try_to_run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
cleanup_rapl_pmus (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_free_pcibus_map (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_types_exit (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
kvm_shutdown (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_dump_msrs (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_cleanup_l1d_flush (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
[..]
Fix this by initializing the new hash to NULL and if the hash is NULL do
not treat it as an empty hash but instead allocate by copying the content
of the first sub ops. Then on subsequent iterations, the new hash will not
be NULL, but the content of the previous subops. If that first subops
attached to all functions, then new hash may assume that the manager ops
also needs to attach to all functions.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.060300046@goodmis.org
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With CONFIG_DEBUG_RSEQ=y, at rseq registration the read-only fields are
copied from user-space, if this copy fails the syscall returns -EFAULT
and the registration should not be activated - but it erroneously is.
Move the activation of the registration after the copy of the fields to
fix this bug.
Fixes: 7d5265ffcd ("rseq: Validate read-only fields under DEBUG_RSEQ config")
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250219205330.324770-1-mjeanson@efficios.com
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
