In case of tiled displays, all the tiles are linke dto each other
for transcoder port sync. So in intel_atomic_check() we need to make
sure that we add all the tiles to the modeset and if one of the
tiles needs a full modeset then mark all other tiles for a full modeset.
We also need to force modeset for all synced crtcs after fastset check.
v6:
* Add comments about why we do not call
drm_atomic_helper_check_modeset (Matt)
* Add FIXME for a corner case where tile info might vanish (Matt)
v5:
* Rebase
v4:
* Fix logic for modeset_synced_crtcs (Ville)
v3:
* Add tile checks only for Gen >11
v2:
* Change crtc_state scope, remove tile_grp_id (Ville)
* Use intel_connector_needs_modeset() (Ville)
* Add modeset_synced_crtcs (Ville)
* Make sure synced crtcs are forced full modeset
after fastset check (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191228031204.10189-1-manasi.d.navare@intel.com
In case of tiled displays, if we hotplug just one connector,
fbcon currently just selects the preferred mode and if it is
tiled mode then that becomes a problem if rest of the tiles are
not present.
So in the fbdev driver on hotplug when we probe the client modeset,
if we dont find all the connectors for all tiles, then on a connector
with one tile, just fallback to the first available non tiled mode
to display over a single connector.
On the hotplug of the consecutive tiled connectors, if the tiled mode
no longer exists because of fbcon size limitation, then return
no modes for consecutive tiles but retain the non tiled mode
on the 0th tile.
Use the same logic in case of connected boot case as well.
This has been tested with Dell UP328K tiled monitor.
v3:
* Check Num tiled conns that are connected (Manasi)
v2:
* Set the modes on consecutive hotplugged tiles to no mode
if tiled mode is pruned (Dave)
v1:
* Just handle the 1st connector hotplug case
* v1 Reviewed-by: Dave Airlie <airlied@redhat.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com> (v2)
Link: https://patchwork.freedesktop.org/patch/msgid/20191211212433.18185-2-manasi.d.navare@intel.com
When smu version is larger than 0x41e2b, it will load
raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it
needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads
raven_kicker_rlc.bin.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In commit d03b224f42 ("drm/i915/gt: Apply sanitiization just before
resume") the GT sanitization was pulled into the resume path as we need
to know the backend in order to do a full reset prior to resume.
However, it is still imperative that we scrub existing GPU state before
clobbering in our early setup, so restore a minimal GPU reset at the
start of our init sequence.
Fixes: d03b224f42 ("drm/i915/gt: Apply sanitiization just before resume")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191228111255.3086901-1-chris@chris-wilson.co.uk
i915 features for v5.6:
- Separate hardware and uapi state (Maarten)
- Expose a number of sprite and plane formats (Ville)
- DDC symlink in HDMI connector sysfs directory (Andrzej Pietrasiewicz)
- Improve obj->mm.lock nesting lock annotation (Daniel)
(Includes lockdep changes)
- Selftest improvements across the board (Chris)
- ICL/TGL VDSC support on DSI (Jani, Vandita)
- TGL DSB fixes (Animesh, Lucas, Tvrtko)
- VBT parsing improvements and fixes (Lucas, Matt, José, Jani, Dan Carpenter)
- Fix LPSS vs. PMIC PWM backlight use on BYT/CHT (Hans)
(Includes ACPI+MFD changes)
- Display state, crtc, plane code refactoring (Ville)
- Set opregion chpd value to indicate the driver handles hotplug (Hans de Goede)
- DSI updates and fixes, TGL pipe D support, port mapping (José, Jani, Vandita)
- Make HDCP 2.2 support cover CFL (Juston Li)
- Fix CML PCI IDs and ULT (Shawn Lee)
- CMP-V PCH fix (Imre)
- TGL: Add another TGL PCH ID (James)
- EHL/JSL: Add new PCI IDs (James)
- Rename pipe update tracepoints (Ville)
- Fix FBC on GLK+ (Ville)
- GuC fixes and improvements (Daniele, Don Hiatt, Stuart Summers, Matthew Brost)
- Display debugfs improvements (Ville)
- Hotplug/irq fixes (Matt)
- PSR fixes and improvements (José)
- DRM_I915_GEM_MMAP_OFFSET ioctl (Abdiel)
- Static analysis fixes (Colin Ian King)
- Register sysctl path globally (Venkata Sandeep Dhanalakota)
- Introduce new macros for tracing (Venkata Sandeep Dhanalakota)
- Migrate gt towards intel_uncore_read/write (Andi)
- Add rps frequency translation helpers (Andi)
- Fix TGL transcoder clock off sequence (José)
- Fix TGL port A audio (Kai Vehmanen)
- TGL render decompression (DK)
- GEM/GT improvements and fixes across the board (Chris)
- Couple of backmerges (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 24 Dec 2019 03:20:48 AM AEST
# gpg: using RSA key D398079D26ABEE6F
# gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1565 A65B 77B0 632E 1124 E59C D398 079D 26AB EE6F
# Conflicts:
# drivers/gpu/drm/i915/display/intel_fbc.c
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/i915_gem.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfr3rkry.fsf@intel.com
regmap has special API to enable the controller bus clock while
initializing register space, and current driver is using
devm_regmap_init_mmio_clk which require to specify bus
clk_id argument as "bus"
But, the usage of clocks are varies between different Allwinner
DSI controllers. Clocking in A33 would need bus and mod clocks
where as A64 would need only bus clock.
Since A64 support only single bus clock, it is optional to
specify the clock-names on the controller device tree node.
So using NULL on clk_id would get the attached clock.
To support clk_id as "bus" and "NULL" during clock enablement
between controllers, this patch add generic code to handle
the bus clock using regmap_mmio_attach_clk with associated
regmap APIs.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-5-jagan@amarulasolutions.com
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:674:2-26: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:794:1-25: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:897:2-36: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:1016:1-35: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:1087:2-34: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:1177:1-33: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:132:2-10: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:140:2-10: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:142:13-21: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3961:1-19: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3981:1-19: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:255:2-20: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:267:2-20: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:253:2-20: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:265:2-20: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/radeon/ni.c:2020:2-15: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/radeon/ni.c:2088:2-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/radeon/cik.c:8140:2-15: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/radeon/cik.c:8212:2-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
