Intel ID: PSIRT-TA-201910-001
CVEID: CVE-2019-14615
Intel GPU Hardware prior to Gen11 does not clear EU state
during a context switch. This can result in information
leakage between contexts.
For Gen8 and Gen9, hardware provides a mechanism for
fast cleardown of the EU state, by issuing a PIPE_CONTROL
with bit 27 set. We can use this in a context batch buffer
to explicitly cleardown the state on every context switch.
As this workaround is already in place for gen8, we can borrow
the code verbatim for Gen9.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Kumar Valsan Prathap <prathap.kumar.valsan@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Fixes coccicheck warning:
drivers/gpu/drm/i915/i915_debugfs.c:3078:4-36: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/i915_debugfs.c:3078:4-36: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/i915_debugfs.c:3080:4-36: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/i915_debugfs.c:3080:4-36: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578013959-31486-2-git-send-email-mafeng.ma@huawei.com
The udl driver for DisplayLink devices depends on support for host-side
USB controllers, which is enabled with CONFIG_USB. Plain USB support as
given by CONFIG_USB_SUPPORT is not sufficient.
This patch changes dependencies for udl to depend on CONFIG_USB, instead
of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a
USB host controller. With this change udl dependencies work the same way
as dependencies for PCI drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de
In some Mediatek SoC, there is no "shadow"
registers for performaing an atomic video mode
set or page flip at vblank/vsync.
The CMDQ (Commend Queue) is used to help
update all relevant display controller registers
with critical time limation.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
The CMDQ (Command Queue) in some Mediatek SoC is used
to help update all relevant display controller registers
with critical time limation.
This patch add cmdq interface in ddp_comp interface,
let all ddp_comp interface can support cpu/cmdq function
at the same time.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Recent improvements in the state tracking in i915 caused PSR to not be
enabled when reusing firmware/BIOS modeset, this is due to all initial
commits returning ealier in intel_atomic_check() as needs_modeset()
is always false.
To fix that here forcing the state compute phase in CRTC that is
driving the eDP that supports PSR once. Enable or disable PSR do not
require a fullmodeset, so user will still experience glitch free boot
process plus the power savings that PSR brings.
It was tried to set mode_changed in intel_initial_commit() but at
this point the connectors are not registered causing a crash when
computing encoder state.
v2:
- removed function return
- change arguments to match intel_hdcp_atomic_check
v3:
- replaced drm includes in intel_psr.h by forward declaration(Jani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112253
Reported-by: <s.zharkoff@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106152128.195171-1-jose.souza@intel.com
Casting a pointer to dma_addr_t produces a warning:
drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free':
drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
priv->rdma.addr_phys = (dma_addr_t)NULL;
In this case, it's worse because the variable name has the suffix
'_phys', which often indicates a phys_addr_t rather than dma_addr_t,
i.e. yet another incompatible type.
Change it to use consistent naming and avoid NULL.
Fixes: 63fba242c4 ("drm/meson: add RDMA module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de
The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech
The backend needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech
Commit 05193dc381 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the Exynos driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:
1/ list_splice() was used to move chain elements to our own internal
chain, but list_splice() does not reset the source list to an empty
state, leading to unexpected bridge hook calls when
drm_bridge_chain_xxx() helpers were called by the core. Replacing
the list_splice() call by list_splice_init() fixes this problem.
2/ drm_bridge_chain_xxx() helpers operate on the
bridge->encoder->bridge_chain list, which is now empty. When the
helper uses list_for_each_entry_reverse() we end up with no operation
done which is not what we want. But that's even worse when the helper
uses list_for_each_entry_from(), because in that case we end up in
an infinite loop searching for the list head element which is no
longer encoder->bridge_chain but exynos_dsi->bridge_chain. To address
that problem we stop using the bridge chain helpers and call the
hooks directly.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 05193dc381 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-3-boris.brezillon@collabora.com
Commit 05193dc381 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the VC4 driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:
1/ list_splice() was used to move chain elements to our own internal
chain, but list_splice() does not reset the source list to an empty
state, leading to unexpected bridge hook calls when
drm_bridge_chain_xxx() helpers were called by the core. Replacing
those list_splice() calls by list_splice_init() ones fixes this
problem.
2/ drm_bridge_chain_xxx() helpers operate on the
bridge->encoder->bridge_chain list, which is now empty. When the
helper uses list_for_each_entry_reverse() we end up with no operation
done which is not what we want. But that's even worse when the helper
uses list_for_each_entry_from(), because in that case we end up in
an infinite loop searching for the list head element which is no
longer encoder->bridge_chain but vc4_dsi->bridge_chain. To address
that problem we stop using the bridge chain helpers and call the
hooks directly.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 05193dc381 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-2-boris.brezillon@collabora.com
For high-res (8K) or HFR (4K120) displays, using uncompressed pixel
formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the
"interesting" modes would be disabled, leaving only low-res or low
framerate modes.
This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS
clock is exceeded. Verified that 8K30 and 4K120 are now available and
working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
