Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len().
Fixes: ec8a8f3c31 ("netfilter: nf_ct_h323: Extend nf_h323_error_boundary to work on bits as well")
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260225130619.1248-2-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link).
Link: https://lore.kernel.org/CANn89iJcLepEin7EtBETrZ36bjoD9LrR=k4cfwWh046GB+4f9A@mail.gmail.com
Fixes: 1f59533f9c ("qdisc: validate frames going through the direct_xmit path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260223235100.108939-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two administrator processes may race when setting child_ns_mode as one
process sets child_ns_mode to "local" and then creates a namespace, but
another process changes child_ns_mode to "global" between the write and
the namespace creation. The first process ends up with a namespace in
"global" mode instead of "local". While this can be detected after the
fact by reading ns_mode and retrying, it is fragile and error-prone.
Make child_ns_mode write-once so that a namespace manager can set it
once and be sure it won't change. Writing a different value after the
first write returns -EBUSY. This applies to all namespaces, including
init_net, where an init process can write "local" to lock all future
namespaces into local mode.
Fixes: eafb64f40c ("vsock: add netns to vsock core")
Suggested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-2-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Johannes Berg says:
====================
A good number of fixes:
- cfg80211:
- cancel rfkill work appropriately
- fix radiotap parsing to correctly reject field 18
- fix wext (yes...) off-by-one for IGTK key ID
- mac80211:
- fix for mesh NULL pointer dereference
- fix for stack out-of-bounds (2 bytes) write on
specific multi-link action frames
- set default WMM parameters for all links
- mwifiex: check dev_alloc_name() return value correctly
- libertas: fix potential timer use-after-free
- brcmfmac: fix crash on probe failure
* tag 'wireless-2026-02-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration
wifi: mac80211: set default WMM parameters on all links
wifi: libertas: fix use-after-free in lbs_free_adapter()
wifi: mwifiex: Fix dev_alloc_name() return value check
wifi: brcmfmac: Fix potential kernel oops when probe fails
wifi: radiotap: reject radiotap with unknown bits
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
wifi: cfg80211: wext: fix IGTK key ID off-by-one
====================
Link: https://patch.msgid.link/20260225113159.360574-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2bd99aef1b ("tcp: accept bare FIN packets under memory
pressure") allowed accepting FIN packets in tcp_data_queue() even when
the receive window was closed, to prevent ACK/FIN loops with broken
clients.
Such a FIN packet is in sequence, but because the FIN consumes a
sequence number, it extends beyond the window. Before commit
9ca48d616e ("tcp: do not accept packets beyond window"),
tcp_sequence() only required the seq to be within the window. After
that change, the entire packet (including the FIN) must fit within the
window. As a result, such FIN packets are now dropped and the handling
path is no longer reached.
Be more lenient by not counting the sequence number consumed by the
FIN when calling tcp_sequence(), restoring the previous behavior for
cases where only the FIN extends beyond the window.
Fixes: 9ca48d616e ("tcp: do not accept packets beyond window")
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-1-a16677ea7cea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
current->nsproxy is should not be accessed directly as syzbot has found
that it could be NULL at times, causing crashes. Fix up the af_vsock
sysctl handlers to use container_of() to deal with the current net
namespace instead of attempting to rely on current.
This is the same type of change done in commit 7f5611cbc4 ("rds:
sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: eafb64f40c ("vsock: add netns to vsock core")
Link: https://patch.msgid.link/2026022318-rearview-gallery-ae13@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- purge error queues in socket destructors
- hci_sync: Fix CIS host feature condition
- L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
- L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
- L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
- L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
- L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
- hci_qca: Cleanup on all setup failures
* tag 'for-net-2026-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
Bluetooth: L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
Bluetooth: Fix CIS host feature condition
Bluetooth: L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
Bluetooth: hci_qca: Cleanup on all setup failures
Bluetooth: purge error queues in socket destructors
Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
====================
Link: https://patch.msgid.link/20260223211634.3800315-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes: b245be1f4d ("net-timestamp: no-payload only sysctl")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported a recursive lock warning in rds_tcp_get_peer_sport() as
it calls inet6_getname() which acquires the socket lock that was already
held by __release_sock().
kworker/u8:6/2985 is trying to acquire lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
but task is already holding lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_sock_set_cork+0x2c/0x2e0 net/ipv4/tcp.c:3694
lock_sock_nested+0x48/0x100 net/core/sock.c:3780
lock_sock include/net/sock.h:1709 [inline]
inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
rds_tcp_get_peer_sport net/rds/tcp_listen.c:70 [inline]
rds_tcp_conn_slots_available+0x288/0x470 net/rds/tcp_listen.c:149
rds_recv_hs_exthdrs+0x60f/0x7c0 net/rds/recv.c:265
rds_recv_incoming+0x9f6/0x12d0 net/rds/recv.c:389
rds_tcp_data_recv+0x7f1/0xa40 net/rds/tcp_recv.c:243
__tcp_read_sock+0x196/0x970 net/ipv4/tcp.c:1702
rds_tcp_read_sock net/rds/tcp_recv.c:277 [inline]
rds_tcp_data_ready+0x369/0x950 net/rds/tcp_recv.c:331
tcp_rcv_established+0x19e9/0x2670 net/ipv4/tcp_input.c:6675
tcp_v6_do_rcv+0x8eb/0x1ba0 net/ipv6/tcp_ipv6.c:1609
sk_backlog_rcv include/net/sock.h:1185 [inline]
__release_sock+0x1b8/0x3a0 net/core/sock.c:3213
Reading from the socket struct directly is safe from possible paths. For
rds_tcp_accept_one(), the socket has just been accepted and is not yet
exposed to concurrent access. For rds_tcp_conn_slots_available(), direct
access avoids the recursive deadlock seen during backlog processing
where the socket lock is already held from the __release_sock().
However, rds_tcp_conn_slots_available() is also called from the normal
softirq path via tcp_data_ready() where the lock is not held. This is
also safe because inet_dport is a stable 16 bits field. A READ_ONCE()
annotation as the value might be accessed lockless in a concurrent
access context.
Note that it is also safe to call rds_tcp_conn_slots_available() from
rds_conn_shutdown() because the fan-out is disabled.
Fixes: 9d27a0fb12 ("net/rds: Trigger rds_send_ping() more than once")
Reported-by: syzbot+5efae91f60932839f0a5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5efae91f60932839f0a5
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260219075738.4403-1-fmancera@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Fixes: 8f2535b92d ("mac80211: process the CSA frame for mesh accordingly")
Cc: stable@vger.kernel.org
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
TIPC uses named table to store TIPC services represented by type and
instance. Each time an application calls TIPC API bind() to bind a
type/instance to a socket, an entry is created and inserted into the
named table. It looks like this:
named table:
key1, entry1 (type, instance ...)
key2, entry2 (type, instance ...)
In the above table, each entry represents a route for sending data
from one socket to the other. For all publications originated from
the same node, the key is UNIQUE to identify each entry.
It is calculated by this formula:
key = socket portid + number of bindings + 1 (1)
where:
- socket portid: unique and calculated by using linux kernel function
get_random_u32_below(). So, the value is randomized.
- number of bindings: the number of times a type/instance pair is bound
to a socket. This number is linearly increased,
starting from 0.
While the socket portid is unique and randomized by linux kernel, the
linear increment of "number of bindings" in formula (1) makes "key" not
unique anymore. For example:
- Socket 1 is created with its associated port number 20062001. Type 1000,
instance 1 is bound to socket 1:
key1: 20062001 + 0 + 1 = 20062002
Then, bind() is called a second time on Socket 1 to by the same type 1000,
instance 1:
key2: 20062001 + 1 + 1 = 20062003
Named table:
key1 (20062002), entry1 (1000, 1 ...)
key2 (20062003), entry2 (1000, 1 ...)
- Socket 2 is created with its associated port number 20062002. Type 1000,
instance 1 is bound to socket 2:
key3: 20062002 + 0 + 1 = 20062003
TIPC looks up the named table and finds out that key2 with the same value
already exists and rejects the insertion into the named table.
This leads to failure of bind() call from application on Socket 2 with error
message EINVAL "Invalid argument".
This commit fixes this issue by adding more port id checking to make sure
that the key is unique to publications originated from the same port id
and node.
Fixes: 218527fe27 ("tipc: replace name table service range array with rb tree")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220050541.237962-1-tung.quang.nguyen@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa
Reported-by: syzbot+52624bdfbf2746d37d70@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000269a1405a12fdc77@google.com/T/
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260219014256.370092-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This issue was discovered during a code audit.
After cancel_delayed_work_sync() is called from tls_sk_proto_close(),
tx_work_handler() can still be scheduled from paths such as the
Delayed ACK handler or ksoftirqd.
As a result, the tx_work_handler() worker may dereference a freed
TLS object.
The following is a simple race scenario:
cpu0 cpu1
tls_sk_proto_close()
tls_sw_cancel_work_tx()
tls_write_space()
tls_sw_write_space()
if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask))
set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask);
cancel_delayed_work_sync(&ctx->tx_work.work);
schedule_delayed_work(&tx_ctx->tx_work.work, 0);
To prevent this race condition, cancel_delayed_work_sync() is
replaced with disable_delayed_work_sync().
Fixes: f87e62d45e ("net/tls: remove close callback sock unlock/lock around TX work flush")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/aZgsFO6nfylfvLE7@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Blamed commit made the assumption that the RPS table for each receive
queue would have the same size, and that it would not change.
Compute flow_id in set_rps_cpu(), do not assume we can use the value
computed by get_rps_cpu(). Otherwise we risk out-of-bound access
and/or crashes.
Fixes: 48aa30443e ("net: Cache hash and flow_id to avoid recalculation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Krishna Kumar <krikku@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260220222605.3468081-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon receiving L2CAP_ECRED_CONN_REQ the given MTU shall be checked
against the suggested MTU of the listening socket as that is required
by the likes of PTS L2CAP/ECFC/BV-27-C test which expects
L2CAP_CR_LE_UNACCEPT_PARAMS if the MTU is lowers than socket omtu.
In order to be able to set chan->omtu the code now allows setting
setsockopt(BT_SNDMTU), but it is only allowed when connection has not
been stablished since there is no procedure to reconfigure the output
MTU.
Link: https://github.com/bluez/bluez/issues/1895
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154 ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings")
Cc: stable@vger.kernel.org
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Similar to 03dba9cea7 ("Bluetooth: L2CAP: Fix not responding with
L2CAP_CR_LE_ENCRYPTION") the result code L2CAP_CR_LE_ENCRYPTION shall
be used when BT_SECURITY_MEDIUM is set since that means security mode 2
which mean it doesn't require authentication which results in
qualification test L2CAP/ECFC/BV-32-C failing.
Link: https://github.com/bluez/bluez/issues/1871
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
Fixes: 134f4b39df ("Bluetooth: add support for skb TX SND/COMPLETION timestamping")
Reported-by: syzbot+7ff4013eabad1407b70a@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=7ff4013eabad1407b70a
Cc: stable@vger.kernel.org
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1f87f7d3a3 ("cfg80211: add rfkill support")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20260211082024.1967588-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2026-02-20
1) Check the value of ipv6_dev_get_saddr() to fix an
uninitialized saddr in xfrm6_get_saddr().
From Jiayuan Chen.
2) Skip the templates check for packet offload in tunnel
mode. Is was already done by the hardware and causes
an unexpected XfrmInTmplMismatch increase.
From Leon Romanovsky.
3) Fix a unregister_netdevice stall due to not dropped
refcounts by always flushing xfrm state and policy
on a NETDEV_UNREGISTER event.
From Tetsuo Handa.
* tag 'ipsec-2026-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
xfrm: skip templates check for packet offload tunnel mode
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
====================
Link: https://patch.msgid.link/20260220094133.14219-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync().
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZSie7rEdh9Nu0eM@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_flow_src_port() is indirectly using sk->sk_txhash as a base,
because __tcp_transmit_skb() uses skb_set_hash_from_sk().
This is problematic because this field can change over the
lifetime of a TCP flow, thanks to calls to sk_rethink_txhash().
Problem is that some NIC might (ab)use the PSP UDP source port in their
RSS computation, and PSP packets for a given flow could jump
from one queue to another.
In order to avoid surprises, it is safer to let Protective Load
Balancing (PLB) get its entropy from the IPv6 flowlabel,
and change psp_write_headers() to use sk->sk_hash which
does not change for the duration of the flow.
We might add a sysctl to select the behavior, if there
is a need for it.
Fixes: fc72451574 ("psp: provide encapsulation helper for drivers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-By: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260218141337.999945-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
Save a local pointer to new_sock->sk and hold a reference before
installing callbacks in rds_tcp_accept_one. After
rds_tcp_set_callbacks() or rds_tcp_reset_callbacks(), tc->t_sock is
set to new_sock which may race with the shutdown path. A concurrent
rds_tcp_conn_path_shutdown() may call sock_release(), which sets
new_sock->sk = NULL and may eventually free sk when the refcount
reaches zero.
Subsequent accesses to new_sock->sk->sk_state would dereference NULL,
causing the crash. The fix saves a local sk pointer before callbacks
are installed so that sk_state can be accessed safely even after
new_sock->sk is nulled, and uses sock_hold()/sock_put() to ensure
sk itself remains valid for the duration.
Fixes: 826c1004d4 ("net/rds: rds_tcp_conn_path_shutdown must not discard messages")
Reported-by: syzbot+96046021045ffe6d7709@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=96046021045ffe6d7709
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260216222643.2391390-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Add missing __rcu annotations to NAT helper hook pointers in Amanda,
FTP, IRC, SNMP and TFTP helpers. From Sun Jian.
2-4):
- Add global spinlock to serialize nft_counter fetch+reset operations.
- Use atomic64_xchg() for nft_quota reset instead of read+subtract pattern.
Note AI review detects a race in this change but it isn't new. The
'racing' bit only exists to prevent constant stream of 'quota expired'
notifications.
- Revert commit_mutex usage in nf_tables reset path, it caused
circular lock dependency. All from Brian Witte.
5) Fix uninitialized l3num value in nf_conntrack_h323 helper.
6) Fix musl libc compatibility in netfilter_bridge.h UAPI header. This
change isn't nice (UAPI headers should not include libc headers), but
as-is musl builds may fail due to redefinition of struct ethhdr.
7) Fix protocol checksum validation in IPVS for IPv6 with extension headers,
from Julian Anastasov.
8) Fix device reference leak in IPVS when netdev goes down. Also from
Julian.
9) Remove WARN_ON_ONCE when accessing forward path array, this can
trigger with sufficiently long forward paths. From Pablo Neira Ayuso.
10) Fix use-after-free in nf_tables_addchain() error path, from Inseo An.
* tag 'nf-26-02-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix use-after-free in nf_tables_addchain()
net: remove WARN_ON_ONCE when accessing forward path array
ipvs: do not keep dest_dst if dev is going down
ipvs: skip ipv6 extension headers for csum checks
include: uapi: netfilter_bridge.h: Cover for musl libc
netfilter: nf_conntrack_h323: don't pass uninitialised l3num value
netfilter: nf_tables: revert commit_mutex usage in reset path
netfilter: nft_quota: use atomic64_xchg for reset
netfilter: nft_counter: serialize reset with spinlock
netfilter: annotate NAT helper hook pointers with __rcu
====================
Link: https://patch.msgid.link/20260217163233.31455-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following part was needed before the blamed commit, because
inet_getpeer_v6() second argument was the prefix.
/* Give more bandwidth to wider prefixes. */
if (rt->rt6i_dst.plen < 128)
tmo >>= ((128 - rt->rt6i_dst.plen)>>5);
Now inet_getpeer_v6() retrieves hosts, we need to remove
@tmo adjustement or wider prefixes likes /24 allow 8x
more ICMP to be sent for a given ratelimit.
As we had this issue for a while, this patch changes net.ipv6.icmp.ratelimit
default value from 1000ms to 100ms to avoid potential regressions.
Also add a READ_ONCE() when reading net->ipv6.sysctl.icmpv6_time.
Fixes: fd0273d793 ("ipv6: Remove external dependency on rt6i_dst and rt6i_src")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260216142832.3834174-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 38a6f08657 ("net: sched: support hash selecting tx queue")
added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is
computed as:
mapping_mod = queue_mapping_max - queue_mapping + 1;
The range size can be 65536 when the requested range covers all possible
u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX).
That value cannot be represented in a u16 and previously wrapped to 0,
so tcf_skbedit_hash() could trigger a divide-by-zero:
queue_mapping += skb_get_hash(skb) % params->mapping_mod;
Compute mapping_mod in a wider type and reject ranges larger than U16_MAX
to prevent params->mapping_mod from becoming 0 and avoid the crash.
Fixes: 38a6f08657 ("net: sched: support hash selecting tx queue")
Cc: stable@vger.kernel.org # 6.12+
Signed-off-by: Ruitong Liu <cnitlrt@gmail.com>
Link: https://patch.msgid.link/20260213175948.1505257-1-cnitlrt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
isk->inet_num, isk->inet_rcv_saddr and sk->sk_bound_dev_if
are read locklessly in ping_lookup().
Add READ_ONCE()/WRITE_ONCE() annotations.
The race on isk->inet_rcv_saddr is probably coming from IPv6 support,
but does not deserve a specific backport.
Fixes: dbca1596bb ("ping: convert to RCU lookups, get rid of rwlock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260216100149.3319315-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp now uses skb extensions, failing to build when that is disabled:
In file included from include/net/psp.h:7,
from net/psp/psp_sock.c:9:
include/net/psp/functions.h: In function '__psp_skb_coalesce_diff':
include/net/psp/functions.h:60:13: error: implicit declaration of function 'skb_ext_find'; did you mean 'skb_ext_copy'? [-Wimplicit-function-declaration]
60 | a = skb_ext_find(one, SKB_EXT_PSP);
| ^~~~~~~~~~~~
| skb_ext_copy
include/net/psp/functions.h:60:31: error: 'SKB_EXT_PSP' undeclared (first use in this function)
60 | a = skb_ext_find(one, SKB_EXT_PSP);
| ^~~~~~~~~~~
include/net/psp/functions.h:60:31: note: each undeclared identifier is reported only once for each function it appears in
include/net/psp/functions.h: In function '__psp_sk_rx_policy_check':
include/net/psp/functions.h:94:53: error: 'SKB_EXT_PSP' undeclared (first use in this function)
94 | struct psp_skb_ext *pse = skb_ext_find(skb, SKB_EXT_PSP);
| ^~~~~~~~~~~
net/psp/psp_sock.c: In function 'psp_sock_recv_queue_check':
net/psp/psp_sock.c:164:41: error: 'SKB_EXT_PSP' undeclared (first use in this function)
164 | pse = skb_ext_find(skb, SKB_EXT_PSP);
| ^~~~~~~~~~~
Select the Kconfig symbol as we do from its other users.
Fixes: 6b46ca260e ("net: psp: add socket security association code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260216105500.2382181-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
