Make the net pointer stored in possible_net_t structure annotated as
an RCU pointer. Change the access helpers to treat it as such.
Introduce read_pnet_rcu() helper to allow caller to dereference
the net pointer under RCU read lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-next patches for v6.7
The second pull request for v6.7, with only driver changes this time.
We have now support for mt7925 PCIe and USB variants, few new features
and of course some fixes.
Major changes:
mt76
- mt7925 support
ath12k
- read board data variant name from SMBIOS
wfx
- Remain-On-Channel (ROC) support
* tag 'wireless-next-2023-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (109 commits)
wifi: rtw89: mac: do bf_monitor only if WiFi 6 chips
wifi: rtw89: mac: set bf_assoc capabilities according to chip gen
wifi: rtw89: mac: set bfee_ctrl() according to chip gen
wifi: rtw89: mac: add registers of MU-EDCA parameters for WiFi 7 chips
wifi: rtw89: mac: generalize register of MU-EDCA switch according to chip gen
wifi: rtw89: mac: update RTS threshold according to chip gen
wifi: rtlwifi: simplify TX command fill callbacks
wifi: hostap: remove unused ioctl function
wifi: atmel: remove unused ioctl function
wifi: rtw89: coex: add annotation __counted_by() to struct rtw89_btc_btf_set_mon_reg
wifi: rtw89: coex: add annotation __counted_by() for struct rtw89_btc_btf_set_slot_table
wifi: rtw89: add EHT radiotap in monitor mode
wifi: rtw89: show EHT rate in debugfs
wifi: rtw89: parse TX EHT rate selected by firmware from RA C2H report
wifi: rtw89: Add EHT rate mask as parameters of RA H2C command
wifi: rtw89: parse EHT information from RX descriptor and PPDU status packet
wifi: radiotap: add bandwidth definition of EHT U-SIG
wifi: rtlwifi: use convenient list_count_nodes()
wifi: p54: Annotate struct p54_cal_database with __counted_by
wifi: brcmfmac: fweh: Add __counted_by for struct brcmf_fweh_queue_item and use struct_size()
...
====================
Link: https://lore.kernel.org/r/20231016143822.880D8C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few networking drivers including bnx2x, bnxt, qede, and idpf call
tcp_gro_complete as part of offloading TCP GRO. The function is only
defined if CONFIG_INET is true, since its TCP specific and is meaningless
if the kernel lacks IP networking support.
The combination of trying to use the complex network drivers with
CONFIG_NET but not CONFIG_INET is rather unlikely in practice: most use
cases are going to need IP networking.
The tcp_gro_complete function just sets some data in the socket buffer for
use in processing the TCP packet in the event that the GRO was offloaded to
the device. If the kernel lacks TCP support, such setup will simply go
unused.
The bnx2x, bnxt, and qede drivers wrap their TCP offload support in
CONFIG_INET checks and skip handling on such kernels.
The idpf driver did not check CONFIG_INET and thus fails to link if the
kernel is configured with CONFIG_NET=y, CONFIG_IDPF=(m|y), and
CONFIG_INET=n.
While checking CONFIG_INET does allow the driver to bypass significantly
more instructions in the event that we know TCP networking isn't supported,
the configuration is unlikely to be used widely.
Rather than require driver authors to care about this, stub the
tcp_gro_complete function when CONFIG_INET=n. This allows drivers to be
left as-is. It does mean the idpf driver will perform slightly more work
than strictly necessary when CONFIG_INET=n, since it will still execute
some of the skb setup in idpf_rx_rsc. However, that work would be performed
in the case where CONFIG_INET=y anyways.
I did not change the existing drivers, since they appear to wrap a
significant portion of code when CONFIG_INET=n. There is little benefit in
trashing these drivers just to unwrap and remove the CONFIG_INET check.
Using a stub for tcp_gro_complete is still beneficial, as it means future
drivers no longer need to worry about this case of CONFIG_NET=y and
CONFIG_INET=n, which should reduce noise from buildbots that check such a
configuration.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231013185502.1473541-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP pingpong threshold is 1 by default. But some applications, like SQL DB
may prefer a higher pingpong threshold to activate delayed acks in quick
ack mode for better performance.
The pingpong threshold and related code were changed to 3 in the year
2019 in:
commit 4a41f453be ("tcp: change pingpong threshold to 3")
And reverted to 1 in the year 2022 in:
commit 4d8f24eeed ("Revert "tcp: change pingpong threshold to 3"")
There is no single value that fits all applications.
Add net.ipv4.tcp_pingpong_thresh sysctl tunable, so it can be tuned for
optimal performance based on the application needs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/1697056244-21888-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().
Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only
express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason.
Victor kicked-off an initial proposal to make this more flexible by disambiguating
verdict from return code by moving the verdict into struct tcf_result and
letting tcf_classify() return a negative error. If hit, then two new drop
reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR
as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual
error codes would have required to attach to tcf_classify via kprobe/kretprobe
to more deeply debug skb and the returned error.
In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more
extensible, it can be addressed in a more straight forward way, that is: Instead
of placing the verdict into struct tcf_result, we can just put the drop reason
in there, which does not require changes throughout various classful schedulers
given the existing verdict logic can stay as is.
Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason
to disambiguate between an error or an intentional drop. New drop reason error
codes can be added successively to the tc code base.
For internal error locations which have not yet been annotated with a
SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and
SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a
SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones
if it is found that they would be useful for troubleshooting.
While drop reasons have infrastructure for subsystem specific error codes which
are currently used by mac80211 and ovs, Jakub mentioned that it is preferred
for tc to use the enum skb_drop_reason core codes given it is a better fit and
currently the tooling support is better, too.
With regards to the latter:
[...] I think Alastair (bpftrace) is working on auto-prettifying enums when
bpftrace outputs maps. So we can do something like:
$ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }'
Attaching 1 probe...
^C
@[SKB_DROP_REASON_TC_INGRESS]: 2
@[SKB_CONSUMED]: 34
^^^^^^^^^^^^ names!!
Auto-magically. [...]
Add a small helper tcf_set_drop_reason() which can be used to set the drop reason
into the tcf_result.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment ip_route_output_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel_dst_lookup() and move it to file
net/ipv4/udp_tunnel_core.c.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This feature totally depends on transport, so if transport doesn't
support it, return error.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
driver_state is a flex array, but is always allocated by the tls core
to a fixed size (TLS_DRIVER_STATE_SIZE_{TX,RX}). Simplify the code by
making that size explicit so that sizeof(struct
tls_offload_context_{tx,rx}) works.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS_MAX_IV_SIZE + TLS_MAX_SALT_SIZE is 20B, we don't get much benefit
in cipher_context's size and can simplify the init code a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's defined in include/net/tls.h, avoid using an overly generic name.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS_MAX_REC_SEQ_SIZE is 8B, we don't get anything by using kmalloc.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add comments for nlpid, family, udlen and udata in struct nft_table, and
afinfo is no longer a member of struct nft_table, so remove the comment
for it.
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
nf_conntrack_alter_reply doesn't do helper reassignment anymore.
Remove the comments that make this claim.
Furthermore, remove dead code from the function and place ot
in nf_conntrack.h.
Signed-off-by: Florian Westphal <fw@strlen.de>
Indicate next PN update using update_pn flag in macsec_context.
Offloaded MACsec implementations does not know whether or not the
MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume
that next PN should always updated, but this is not always true.
The PN can be reset to its initial value using the following command:
$ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case
Or, the update PN command will succeed even if the driver does not support
PN updates.
$ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case
Comparing the initial PN with the new PN value is not a solution. When
the user updates the PN using its initial value the command will
succeed, even if the driver does not support it. Like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to better estimate whether a data packet has been
retransmitted or is the result of a TLP, we save the last received
ipv6 flowlabel.
To make space for this field we resize the "ato" field in
inet_connection_sock as the current value of TCP_DELACK_MAX can be
fully contained in 8 bits and add a compile_time_assert ensuring this
field is the required size.
v2: addressed kernel bot feedback about dccp_delack_timer()
v3: addressed build error introduced by commit bbf80d713f ("tcp:
derive delack_max from rto_min")
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.7
The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.
Major changes:
cfg80211
- remove wdev mutex, use the wiphy mutex instead
- annotate iftype_data pointer with sparse
- first kunit tests, for element defrag
- remove unused scan_width support
mac80211
- major locking rework, remove several locks like sta_mtx, key_mtx
etc. and use the wiphy mutex instead
- remove unused shifted rate support
- support antenna control in frame injection (requires driver support)
- convert RX_DROP_UNUSABLE to more detailed reason codes
rtw89
- TDMA-based multi-channel concurrency (MCC) support
iwlwifi
- support set_antenna() operation
- support frame injection antenna control
ath12k
- WCN7850: enable 320 MHz channels in 6 GHz band
- WCN7850: hardware rfkill support
- WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k
- add chip id board name while searching board-2.bin
* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits)
wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()
wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips
wifi: rtw89: debug: show txpwr table according to chip gen
wifi: rtw89: phy: set TX power RU limit according to chip gen
wifi: rtw89: phy: set TX power limit according to chip gen
wifi: rtw89: phy: set TX power offset according to chip gen
wifi: rtw89: phy: set TX power by rate according to chip gen
wifi: rtw89: mac: get TX power control register according to chip gen
wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp
wifi: rtlwifi: fix EDCA limit set by BT coexistence
wifi: rt2x00: fix MT7620 low RSSI issue
wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance
wifi: rtw89: refine uplink trigger based control mechanism
wifi: rtw89: 8851b: update TX power tables to R34
wifi: rtw89: 8852b: update TX power tables to R35
wifi: rtw89: 8852c: update TX power tables to R67
wifi: rtw89: regd: configure Thailand in regulation type
wifi: mac80211: add back SPDX identifier
wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value
wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines
...
====================
Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
pfifo_fast prio2band[] is renamed to sch_default_prio2band[]
and exported because we want to share it in FQ.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handle the case when GSO SKB linear length is too large.
MANA NIC requires GSO packets to put only the header part to SGE0,
otherwise the TX queue may stop at the HW level.
So, use 2 SGEs for the skb linear part which contains more than the
packet header.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit fixes quick-ack counting so that it only considers that a
quick-ack has been provided if we are sending an ACK that newly
acknowledges data.
The code was erroneously using the number of data segments in outgoing
skbs when deciding how many quick-ack credits to remove. This logic
does not make sense, and could cause poor performance in
request-response workloads, like RPC traffic, where requests or
responses can be multi-segment skbs.
When a TCP connection decides to send N quick-acks, that is to
accelerate the cwnd growth of the congestion control module
controlling the remote endpoint of the TCP connection. That quick-ack
decision is purely about the incoming data and outgoing ACKs. It has
nothing to do with the outgoing data or the size of outgoing data.
And in particular, an ACK only serves the intended purpose of allowing
the remote congestion control to grow the congestion window quickly if
the ACK is ACKing or SACKing new data.
The fix is simple: only count packets as serving the goal of the
quickack mechanism if they are ACKing/SACKing new data. We can tell
whether this is the case by checking inet_csk_ack_scheduled(), since
we schedule an ACK exactly when we are ACKing/SACKing new data.
Fixes: fc6415bcb0 ("[TCP]: Fix quick-ack decrementing with TSO.")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Quite a collection of fixes this time, really too many
to list individually. Many stack fixes, even rfkill
(found by simulation and the new eevdf scheduler)!
Also a bigger maintainers file cleanup, to remove old
and redundant information.
* tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits)
wifi: iwlwifi: mvm: Fix incorrect usage of scan API
wifi: mac80211: Create resources for disabled links
wifi: cfg80211: avoid leaking stack data into trace
wifi: mac80211: allow transmitting EAPOL frames with tainted key
wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
wifi: cfg80211: Fix 6GHz scan configuration
wifi: mac80211: fix potential key leak
wifi: mac80211: fix potential key use-after-free
wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
wifi: brcmfmac: Replace 1-element arrays with flexible arrays
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM
rfkill: sync before userspace visibility/changes
wifi: mac80211: fix mesh id corruption on 32 bit systems
wifi: cfg80211: add missing kernel-doc for cqm_rssi_work
wifi: cfg80211: fix cqm_config access race
wifi: iwlwifi: mvm: Fix a memory corruption issue
wifi: iwlwifi: Ensure ack flag is properly cleared.
wifi: iwlwifi: dbg_ini: fix structure packing
iwlwifi: mvm: handle PS changes in vif_cfg_changed
...
====================
Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases, drivers may need to veto the changing of a MAC address on
a user port. Such is the case with KSZ9477 when it offloads a HSR device,
because it programs the MAC address of multiple ports to a shared
hardware register. Those ports need to have equal MAC addresses for the
lifetime of the HSR offload.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drivers can provide meaningful error messages which state a reason why
they can't perform an offload, and dsa_slave_changeupper() already has
the infrastructure to propagate these over netlink rather than printing
to the kernel log. So pass the extack argument and modify the xrs700x
driver's port_hsr_join() prototype.
Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases
from xrs700x_hsr_join().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After deleting an interface address in fib_del_ifaddr(), the function
scans the fib_info list for stray entries and calls fib_flush() and
fib_table_flush(). Then the stray entries will be deleted silently and no
RTM_DELROUTE notification will be sent.
This lack of notification can make routing daemons, or monitor like
`ip monitor route` miss the routing changes. e.g.
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 192.168.5.5/24 dev dummy1
+ ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5
+ ip -4 route
7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
As Ido reminded, fib_table_flush() isn't only called when an address is
deleted, but also when an interface is deleted or put down. The lack of
notification in these cases is deliberate. And commit 7c6bb7d2fa
("net/ipv6: Add knob to skip DELROUTE message on device down") introduced
a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send
the route delete notify blindly in fib_table_flush().
To fix this issue, let's add a new flag in "struct fib_info" to track the
deleted prefer source address routes, and only send notify for them.
After update:
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
Suggested-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some reads of inet->tos are racy.
Add needed READ_ONCE() annotations and convert IP_TOS option lockless.
v2: missing changes in include/net/route.h (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet->pmtudisc can be read locklessly.
Implement proper lockless reads and writes to inet->pmtudisc
ip_sock_set_mtu_discover() can now be called from arbitrary
contexts.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
