Arm SCMI updates for v6.17
1. A fix is introduced to correct turbo frequency marking for 64-bit
devices with sustained frequencies over 4GHz, ensuring accurate turbo
frequency identification.
2. Debug capabilities are being improved by introducing in-flight transfer
tracking using debug counters, which help diagnose transfer congestion
and behavior. Additional tracepoints are added to log in-flight counts
at transfer begin and end, offering better runtime insight. The debug
counters now support decrement operations using a newly added
scmi_dec_count helper, making counter tracking symmetric and more robust.
3. A race condition in suspend-resume logic is being resolved by ensuring
SCMI_SYSPOWER_IDLE state is set early during resume, improving suspend
reliability under certain conditions. New suspend and resume operations
are added to the scmi_bus_type to enable finer power management control
for SCMI-based devices.
4. Finally enhancements are also made to avoid registering notifiers for
events that a platform does not support, reducing unnecessary overhead
by checking for unsupported event types during protocolinitialization.
* tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPS
firmware: arm_scmi: Avoid notifier registration for unsupported events
firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
firmware: arm_scmi: Add power management operations to SCMI bus
include: trace: Add tracepoint support for inflight xfer count
firmware: arm_scmi: Track number of inflight SCMI transfers
firmware: arm_scmi: Add support for debug counter decrement
firmware: arm_scmi: Fix up turbo frequencies selection
Link: https://lore.kernel.org/r/20250709122907.1171913-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in fcntl_dirnotify()
- Raise SB_I_NOEXEC on secrement superblock instead of messing with
flags on the mount
- Add fsdevel and block mailing lists to uio entry. We had a few
instances were very questionable stuff was added without either block
or the VFS being aware of it
- Fix netfs copy-to-cache so that it performs collection with
ceph+fscache
- Fix netfs race between cache write completion and ALL_QUEUED being
set
- Verify the inode mode when loading entries from disk in isofs
- Avoid state_lock in iomap_set_range_uptodate()
- Fix PIDFD_INFO_COREDUMP check in PIDFD_GET_INFO ioctl
- Fix the incorrect return value in __cachefiles_write()
* tag 'vfs-6.16-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: add block and fsdevel lists to iov_iter
netfs: Fix race between cache write completion and ALL_QUEUED being set
netfs: Fix copy-to-cache so that it performs collection with ceph+fscache
fix a leak in fcntl_dirnotify()
iomap: avoid unnecessary ifs_set_range_uptodate() with locks
isofs: Verify inode mode when loading from disk
cachefiles: Fix the incorrect return value in __cachefiles_write()
secretmem: use SB_I_NOEXEC
coredump: fix PIDFD_INFO_COREDUMP ioctl check
When a call is released, rxrpc takes the spinlock and removes it from
->recvmsg_q in an effort to prevent racing recvmsg() invocations from
seeing the same call. Now, rxrpc_recvmsg() only takes the spinlock when
actually removing a call from the queue; it doesn't, however, take it in
the lead up to that when it checks to see if the queue is empty. It *does*
hold the socket lock, which prevents a recvmsg/recvmsg race - but this
doesn't prevent sendmsg from ending the call because sendmsg() drops the
socket lock and relies on the call->user_mutex.
Fix this by firstly removing the bit in rxrpc_release_call() that dequeues
the released call and, instead, rely on recvmsg() to simply discard
released calls (done in a preceding fix).
Secondly, rxrpc_notify_socket() is abandoned if the call is already marked
as released rather than trying to be clever by setting both pointers in
call->recvmsg_link to NULL to trick list_empty(). This isn't perfect and
can still race, resulting in a released call on the queue, but recvmsg()
will now clean that up.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a call receives an event (such as incoming data), the call gets placed
on the socket's queue and a thread in recvmsg can be awakened to go and
process it. Once the thread has picked up the call off of the queue,
further events will cause it to be requeued, and once the socket lock is
dropped (recvmsg uses call->user_mutex to allow the socket to be used in
parallel), a second thread can come in and its recvmsg can pop the call off
the socket queue again.
In such a case, the first thread will be receiving stuff from the call and
the second thread will be blocked on call->user_mutex. The first thread
can, at this point, process both the event that it picked call for and the
event that the second thread picked the call for and may see the call
terminate - in which case the call will be "released", decoupling the call
from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control
message).
The first thread will return okay, but then the second thread will wake up
holding the user_mutex and, if it sees that the call has been released by
the first thread, it will BUG thusly:
kernel BUG at net/rxrpc/recvmsg.c:474!
Fix this by just dequeuing the call and ignoring it if it is seen to be
already released. We can't tell userspace about it anyway as the user call
ID has become stale.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stephen reported new 'make htmldocs' warnings introduced by 4cc21a0076
("block: add tracepoint for blk_zone_update_request_bio").
One is a wrong function name in the tracepoint's kernel-doc and one is a
wrong function parameter.
Fix these so 'make htmldocs' is warning free again for the block layer
tracepoints.
Fixes: 4cc21a0076 ("block: add tracepoint for blk_zone_update_request_bio")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250716133631.94898-1-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a tracepoint for blkdev_zone_mgmt to trace zone management commands
submitted by higher layers like file systems or user space.
An example output for this tracepoint is as follows:
mkfs.btrfs-203 [001] ..... 42.877493: blkdev_zone_mgmt: 8,0 ZRS 5242880 + 0
This example output shows a REQ_OP_ZONE_RESET operation submitted by
mkfs.btrfs.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250715115324.53308-5-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the svc_wake_up tracepoint into svc_pool_thread_event class.
Have it also record the pool id, and add new tracepoints for when the
thread is already running and for when there are no idle threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED.
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/CAKPOu+8z_ijTLHdiCYGU_Uk7yYD=shxyGLwfe-L7AV3DhebS3w@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250711151005.2956810-3-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
After mpage_map_and_submit_extent() supports restarting handle if
credits are insufficient during allocating blocks, it is more likely to
exit the current mapping iteration and continue to process the current
processing partially mapped folio again. The existing tracepoints are
not sufficient to track this situation, so enhance the tracepoints to
track the writeback position and the return value before and after
submitting the folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
migratetype is no longer overwritten during pageblock isolation,
start_isolate_page_range(), has_unmovable_pages(), and
set_migratetype_isolate() no longer need which migratetype to restore
during isolation failure.
For has_unmoable_pages(), it needs to know if the isolation is for CMA
allocation, so adding PB_ISOLATE_MODE_CMA_ALLOC provide the information.
At the same time change isolation flags to enum pb_isolate_mode
(PB_ISOLATE_MODE_MEM_OFFLINE, PB_ISOLATE_MODE_CMA_ALLOC,
PB_ISOLATE_MODE_OTHER). Remove REPORT_FAILURE and check
PB_ISOLATE_MODE_MEM_OFFLINE, since only PB_ISOLATE_MODE_MEM_OFFLINE
reports isolation failures.
alloc_contig_range() no longer needs migratetype. Replace it with a newly
defined acr_flags_t to tell if an allocation is for CMA. So does
__alloc_contig_migrate_range(). Add ACR_FLAGS_NONE (set to 0) to indicate
ordinary allocations.
Link: https://lkml.kernel.org/r/20250617021115.2331563-7-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Richard Chang <richardycc@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The core kernel code is currently very inconsistent in its use of
vm_flags_t vs. unsigned long. This prevents us from changing the type of
vm_flags_t in the future and is simply not correct, so correct this.
While this results in rather a lot of churn, it is a critical
pre-requisite for a future planned change to VMA flag type.
Additionally, update VMA userland tests to account for the changes.
To make review easier and to break things into smaller parts, driver and
architecture-specific changes is left for a subsequent commit.
The code has been adjusted to cascade the changes across all calling code
as far as is needed.
We will adjust architecture-specific and driver code in a subsequent patch.
Overall, this patch does not introduce any functional change.
Link: https://lkml.kernel.org/r/d1588e7bb96d1ea3fe7b9df2c699d5b4592d901d.1750274467.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull vfs fixes from Christian Brauner:
- Fix a regression caused by the anonymous inode rework. Making them
regular files causes various places in the kernel to tip over
starting with io_uring.
Revert to the former status quo and port our assertion to be based on
checking the inode so we don't lose the valuable VFS_*_ON_*()
assertions that have already helped discover weird behavior our
outright bugs.
- Fix the the upper bound calculation in fuse_fill_write_pages()
- Fix priority inversion issues in the eventpoll code
- Make secretmen use anon_inode_make_secure_inode() to avoid bypassing
the LSM layer
- Fix a netfs hang due to missing case in final DIO read result
collection
- Fix a double put of the netfs_io_request struct
- Provide some helpers to abstract out NETFS_RREQ_IN_PROGRESS flag
wrangling
- Fix infinite looping in netfs_wait_for_pause/request()
- Fix a netfs ref leak on an extra subrequest inserted into a request's
list of subreqs
- Fix various cifs RPC callbacks to set NETFS_SREQ_NEED_RETRY if a
subrequest fails retriably
- Fix a cifs warning in the workqueue code when reconnecting a channel
- Fix the updating of i_size in netfs to avoid a race between testing
if we should have extended the file with a DIO write and changing
i_size
- Merge the places in netfs that update i_size on write
- Fix coredump socket selftests
* tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
anon_inode: rework assertions
netfs: Update tracepoints in a number of ways
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
netfs: Merge i_size update functions
netfs: Fix i_size updating
smb: client: set missing retry flag in cifs_writev_callback()
smb: client: set missing retry flag in cifs_readv_callback()
smb: client: set missing retry flag in smb2_writev_callback()
netfs: Fix ref leak on inserted extra subreq in write retry
netfs: Fix looping in wait functions
netfs: Provide helpers to perform NETFS_RREQ_IN_PROGRESS flag wangling
netfs: Fix double put of request
netfs: Fix hang due to missing case in final DIO read result collection
eventpoll: Fix priority inversion problem
fuse: fix fuse_fill_write_pages() upper bound calculation
fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass
selftests/coredump: Fix "socket_detect_userspace_client" test failure
Enhance the existing SCMI transfer tracepoints by including the current
in-flight transfer count in `scmi_xfer_begin` and `scmi_xfer_end`.
Introduce a new helper `scmi_inflight_count()` to retrieve the active
transfer count from the SCMI debug counters when debug is enabled.
This trace data is useful for visualizing transfer activity over time
and identifying congestion or unexpected behavior in SCMI messaging.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-4-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make a number of updates to the netfs tracepoints:
(1) Remove a duplicate trace from netfs_unbuffered_write_iter_locked().
(2) Move the trace in netfs_wake_rreq_flag() to after the flag is cleared
so that the change appears in the trace.
(3) Differentiate the use of netfs_rreq_trace_wait/woke_queue symbols.
(4) Don't do so many trace emissions in the wait functions as some of them
are redundant.
(5) In netfs_collect_read_results(), differentiate a subreq that's being
abandoned vs one that has been consumed in a regular way.
(6) Add a tracepoint to indicate the call to ->ki_complete().
(7) Don't double-increment the subreq_counter when retrying a write.
(8) Move the netfs_sreq_trace_io_progress tracepoint within cifs code to
just MID_RESPONSE_RECEIVED and add different tracepoints for other MID
states and note check failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Link: https://lore.kernel.org/20250701163852.2171681-14-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Renumber the NETFS_RREQ_* flags to put the most useful status bits in the
bottom nibble - and therefore the last hex digit in the trace output -
making it easier to grasp the state at a glance.
In particular, put the IN_PROGRESS flag in bit 0 and ALL_QUEUED at bit 1.
Also make the flags field in /proc/fs/netfs/requests larger to accommodate
all the flags.
Also make the flags field in the netfs_sreq tracepoint larger to
accommodate all the NETFS_SREQ_* flags.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-13-dhowells@redhat.com
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed.
Fixes: 2b1424cd13 ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-3-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-06-27
We've added 6 non-merge commits during the last 8 day(s) which contain
a total of 6 files changed, 120 insertions(+), 20 deletions(-).
The main changes are:
1) Fix RCU usage in task_cls_state() for BPF programs using helpers like
bpf_get_cgroup_classid_curr() outside of networking, from Charalampos
Mitrodimas.
2) Fix a sockmap race between map_update and a pending workqueue from
an earlier map_delete freeing the old psock where both pointed to the
same psock->sk, from Jiayuan Chen.
3) Fix a data corruption issue when using bpf_msg_pop_data() in kTLS which
failed to recalculate the ciphertext length, also from Jiayuan Chen.
4) Remove xdp_redirect_map{,_err} trace events since they are unused and
also hide XDP trace events under CONFIG_BPF_SYSCALL, from Steven Rostedt.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
xdp: tracing: Hide some xdp events under CONFIG_BPF_SYSCALL
xdp: Remove unused events xdp_redirect_map and xdp_redirect_map_err
net, bpf: Fix RCU usage in task_cls_state() for BPF programs
selftests/bpf: Add test to cover ktls with bpf_msg_pop_data
bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls
bpf, sockmap: Fix psock incorrectly pointing to sk
====================
Link: https://patch.msgid.link/20250626230111.24772-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Squash two #idef CONFIG_HAVE_KVM_IRQCHIP regions in KVM's trace events, as
the only code outside of the #idefs depends on CONFIG_KVM_IOAPIC, and that
Kconfig only exists for x86, which unconditionally selects HAVE_KVM_IRQCHIP.
No functional change intended.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a Kconfig to allow building KVM without support for emulating a I/O
APIC, PIC, and PIT, which is desirable for deployments that effectively
don't support a fully in-kernel IRQ chip, i.e. never expect any VMM to
create an in-kernel I/O APIC. E.g. compiling out support eliminates a few
thousand lines of guest-facing code and gives security folks warm fuzzies.
As a bonus, wrapping relevant paths with CONFIG_KVM_IOAPIC #ifdefs makes
it much easier for readers to understand which bits and pieces exist
specifically for fully in-kernel IRQ chips.
Opportunistically convert all two in-kernel uses of __KVM_HAVE_IOAPIC to
CONFIG_KVM_IOAPIC, e.g. rather than add a second #ifdef to generate a stub
for kvm_arch_post_irq_routing_update().
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the I/O APIC tracepoints and trace_kvm_msi_set_irq() to x86, as
__KVM_HAVE_IOAPIC is just code for "x86", and trace_kvm_msi_set_irq()
isn't unique to I/O APIC emulation.
Opportunistically clean up the absurdly messy #includes in ioapic.c.
No functional change intended.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The rstat update side used to insert the cgroup whose stats are updated
in the update tree and the read side flush the update tree to get the
latest uptodate stats. The per-cpu per-subsystem locks were used to
synchronize the update and flush side. However now the update side does
not access update tree but uses per-cpu lockless lists. So there is no
need for locks to synchronize update and flush side. Let's remove them.
Suggested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Several of the tcp_ao events are only called when CONFIG_TCP_AO is
defined. As each event can take up to 5K regardless if they are used or
not, it's best not to define them when they are not used. Add #ifdef
around these events when they are not used.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612094616.4222daf0@batman.local.home
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dma-fence objects currently suffer from a potential use after free problem
where fences exported to userspace and other drivers can outlive the
exporting driver, or the associated data structures.
The discussion on how to address this concluded that adding reference
counting to all the involved objects is not desirable, since it would need
to be very wide reaching and could cause unloadable drivers if another
entity would be holding onto a signaled fence reference potentially
indefinitely.
This patch enables the safe access by introducing and documenting a
contract between fence exporters and users. It documents a set of
contraints and adds helpers which a) drivers with potential to suffer from
the use after free must use and b) users of the dma-fence API must use as
well.
Premise of the design has multiple sides:
1. Drivers (fence exporters) MUST ensure a RCU grace period between
signalling a fence and freeing the driver private data associated with it.
The grace period does not have to follow the signalling immediately but
HAS to happen before data is freed.
2. Users of the dma-fence API marked with such requirement MUST contain
the complete access to the data within a single code block guarded by
rcu_read_lock() and rcu_read_unlock().
The combination of the two ensures that whoever sees the
DMA_FENCE_FLAG_SIGNALED_BIT not set is guaranteed to have access to a
valid fence->lock and valid data potentially accessed by the fence->ops
virtual functions, until the call to rcu_read_unlock().
3. Module unload (fence->ops) disappearing is for now explicitly not
handled. That would required a more complex protection, possibly needing
SRCU instead of RCU to handle callers such as dma_fence_release() and
dma_fence_wait_timeout(), where race between
dma_fence_enable_sw_signaling, signalling, and dereference of
fence->ops->wait() would need a sleeping SRCU context.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250610164226.10817-4-tvrtko.ursulin@igalia.com
The events xdp_cpumap_kthread, xdp_cpumap_enqueue and xdp_devmap_xmit are
only called when CONFIG_BPF_SYSCALL is defined. As each event can take up
to 5K regardless if they are used or not, it's best not to define them
when they are not used. Add #ifdef around these events when they are not
used.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250612182023.78397b76@batman.local.home
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Each TRACE_EVENT() defined can take up around 5K of text and meta data
regardless if they are used or not. New code is being developed that will
warn when a tracepoint is defined but not used.
The trace events xdp_redirect_map and xdp_redirect_map_err are defined but
not used, but there's also a comment that states these are kept around for
backward compatibility. Which is interesting because since they are not
used, any old BPF program that expects them to exist will get incorrect
data (no data) when they use them. It's worse than not working, it's
silently failing.
Remove them as they will soon cause warnings, or if they really need to
stick around, then code needs to be added to use them.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20250611155615.0c2cf61c@batman.local.home
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By default the scsi_dispatch_cmd_error() return value is displayed in
decimal:
kworker/3:1H-183 [003] .... 51.035474: scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=4 data_sgl=1 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(READ_10 lba=3907214 txlen=1 protect=0 raw=28 00 00 3b 9e 8e 00 00 01 00) rtn=4181
However, these numbers are not particularly helpful wrt. debugging
errors. Especially since the kernel code consistently uses the following
defines in hexadecimal:
SCSI_MLQUEUE_HOST_BUSY 0x1055
SCSI_MLQUEUE_DEVICE_BUSY 0x1056
SCSI_MLQUEUE_EH_RETRY 0x1057
SCSI_MLQUEUE_TARGET_BUSY 0x1058
Switch to using the string form of these values in the trace output:
dd-1059 [007] ..... 31.689529: scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=4 data_sgl=65 prot_sgl=0 prot_op=SCSI_PROT_NORMAL driver_tag=23 scheduler_tag=117 cmnd=(READ_10 lba=0 txlen=128 protect=0 raw=28 00 00 00 00 00 00 00 80 00) rtn=SCSI_MLQUEUE_DEVICE_BUSY
Signed-off-by: Kassey Li <quic_yingangl@quicinc.com>
Link: https://lore.kernel.org/r/20250521011711.1983625-1-quic_yingangl@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
- Fix ring_buffer_subbuf_order_set() error path lock protection
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
Pull NFS clent updates from Anna Schumaker:
"New Features:
- Implement the Sunrpc rfc2203 rpcsec_gss sequence number cache
- Add support for FALLOC_FL_ZERO_RANGE on NFS v4.2
- Add a localio sysfs attribute
Stable Fixes:
- Fix double-unlock bug in nfs_return_empty_folio()
- Don't check for OPEN feature support in v4.1
- Always probe for LOCALIO support asynchronously
- Prevent hang on NFS mounts with xprtsec=[m]tls
Other Bugfixes:
- xattr handlers should check for absent nfs filehandles
- Fix setattr caching of TIME_[MODIFY|ACCESS]_SET when timestamps are
delegated
- Fix listxattr to return selinux security labels
- Connect to NFSv3 DS using TLS if MDS connection uses TLS
- Clear SB_RDONLY before getting a superblock, and ignore when
remounting
- Fix incorrect handling of NFS error codes in nfs4_do_mkdir()
- Various nfs_localio fixes from Neil Brown that include fixing an
rcu compilation error found by older gcc versions.
- Update stats on flexfiles pNFS DSes when receiving NFS4ERR_DELAY
Cleanups:
- Add a refcount tracker for struct net in the nfs_client
- Allow FREE_STATEID to clean up delegations
- Always set NLINK even if the server doesn't support it
- Cleanups to the NFS folio writeback code
- Remove dead code from xs_tcp_tls_setup_socket()"
* tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (30 commits)
flexfiles/pNFS: update stats on NFS4ERR_DELAY for v4.1 DSes
nfs_localio: change nfsd_file_put_local() to take a pointer to __rcu pointer
nfs_localio: protect race between nfs_uuid_put() and nfs_close_local_fh()
nfs_localio: duplicate nfs_close_local_fh()
nfs_localio: simplify interface to nfsd for getting nfsd_file
nfs_localio: always hold nfsd net ref with nfsd_file ref
nfs_localio: use cmpxchg() to install new nfs_file_localio
SUNRPC: Remove dead code from xs_tcp_tls_setup_socket()
SUNRPC: Prevent hang on NFS mount with xprtsec=[m]tls
nfs: fix incorrect handling of large-number NFS errors in nfs4_do_mkdir()
nfs: ignore SB_RDONLY when remounting nfs
nfs: clear SB_RDONLY before getting superblock
NFS: always probe for LOCALIO support asynchronously
pnfs/flexfiles: connect to NFSv3 DS using TLS if MDS connection uses TLS
NFS: add localio to sysfs
nfs: use writeback_iter directly
nfs: refactor nfs_do_writepage
nfs: don't return AOP_WRITEPAGE_ACTIVATE from nfs_do_writepage
nfs: fold nfs_page_async_flush into nfs_do_writepage
NFSv4: Always set NLINK even if the server doesn't support it
...
