mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-17 17:47:52 -04:00
2cafcddbdada359f36a93bd014eef7ea2186435d
1498 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
7c8a4671dc |
Merge tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for
open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for
container runtimes and other namespace-based isolation mechanisms.
This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via
OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful
when you mount an actual filesystem to be used as the container
rootfs.
- Currently, creating a new mount namespace always copies the entire
mount tree from the caller's namespace. For containers and sandboxes
that intend to build their mount table from scratch this is wasteful:
they inherit a potentially large mount tree only to immediately tear
it down.
This series adds support for creating a mount namespace that contains
only a clone of the root mount, with none of the child mounts. Two
new flags are introduced:
- CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space
- UNSHARE_EMPTY_MNTNS (0x00100000) for unshare()
Both flags imply CLONE_NEWNS. The resulting namespace contains a
single nullfs root mount with an immutable empty directory. The
intended workflow is to then mount a real filesystem (e.g., tmpfs)
over the root and build the mount table from there.
- Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to
switch out the rootfs without pivot_root(2).
The traditional approach to switching the rootfs involves
pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically
updates fs->root for all tasks sharing the same fs_struct. This has
consequences for fork(), unshare(CLONE_FS), and setns().
This series instead decomposes root-switching into individually
atomic, locally-scoped steps:
fd_tree = open_tree(-EBADF, "/newroot", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC);
fchdir(fd_tree);
move_mount(fd_tree, "", AT_FDCWD, "/", MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH);
chroot(".");
umount2(".", MNT_DETACH);
Since each step only modifies the caller's own state, the
fork/unshare/setns races are eliminated by design.
A key step to making this possible is to remove the locked mount
restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting
beneath a mount that is locked. The locked mount protects the
underlying mount from being revealed. This is a core mechanism of
unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount
namespace become locked. That effectively makes the new mount table
useless as the caller cannot ever get rid of any of the mounts no
matter how useless they are.
We can lift this restriction though. We simply transfer the locked
property from the top mount to the mount beneath. This works because
what we care about is to protect the underlying mount aka the parent.
The mount mounted between the parent and the top mount takes over the
job of protecting the parent mount from the top mount mount. This
leaves us free to remove the locked property from the top mount which
can consequently be unmounted:
unshare(CLONE_NEWUSER | CLONE_NEWNS)
and we inherit a clone of procfs on /proc then currently we cannot
unmount it as:
umount -l /proc
will fail with EINVAL because the procfs mount is locked.
After this series we can now do:
mount --beneath -t tmpfs tmpfs /proc
umount -l /proc
after which a tmpfs mount has been placed beneath the procfs mount.
The tmpfs mount has become locked and the procfs mount has become
unlocked.
This means you can safely modify an inherited mount table after
unprivileged namespace creation.
Afterwards we simply make it possible to move a mount beneath the
rootfs allowing to upgrade the rootfs.
Removing the locked restriction makes this very useful for containers
created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an
inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible
to switch out the rootfs instead of using the costly pivot_root(2).
* tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/namespaces: remove unused utils.h include from listns_efault_test
selftests/fsmount_ns: add missing TARGETS and fix cap test
selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment
selftests/empty_mntns: fix statmount_alloc() signature mismatch
selftests/statmount: remove duplicate wait_for_pid()
mount: always duplicate mount
selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests
move_mount: allow MOVE_MOUNT_BENEATH on the rootfs
move_mount: transfer MNT_LOCKED
selftests/filesystems: add clone3 tests for empty mount namespaces
selftests/filesystems: add tests for empty mount namespaces
namespace: allow creating empty mount namespaces
selftests: add FSMOUNT_NAMESPACE tests
selftests/statmount: add statmount_alloc() helper
tools: update mount.h header
mount: add FSMOUNT_NAMESPACE
mount: simplify __do_loopback()
mount: start iterating from start of rbtree
|
||
|
Linus Torvalds
|
91a4855d6c |
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
||
|
Linus Torvalds
|
f5ad410100 |
Merge tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
|
||
|
Linus Torvalds
|
88b29f3f57 |
Merge tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
|
||
|
Daniel Borkmann
|
7789c6bb76 |
net: Add queue-create operation
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Alexei Starovoitov
|
891a05ccba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 7.0-rc6+
Cross-merge BPF and other fixes after downstream PR. Minor conflict in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eyal Birger
|
f9a80c7ce4 |
bpf: Clarify BPF_RB_NO_WAKEUP behavior for bpf_ringbuf_discard()
Clarify bpf_ringbuf_discard() documentation for BPF_RB_NO_WAKEUP. Discarded ring buffer records are still left in the ring buffer and are only skipped when user space consumes them. This can matter when BPF_RB_NO_WAKEUP is used: a later submit relying on adaptive wakeup might not wake the consumer, because the discarded record still needs to be consumed first. Scenario: epoll_wait(rb_fd); // blocks rec = bpf_ringbuf_reserve(&rb, ...); bpf_ringbuf_discard(rec, BPF_RB_NO_WAKEUP); rec = bpf_ringbuf_reserve(&rb, ...); bpf_ringbuf_submit(rec, 0); // valid record, but no wakeup Document this in bpf_ringbuf_discard() to make the interaction between discarded records, user-space consumption, and adaptive wakeups explicit. Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260331130612.3762433-1-eyal.birger@gmail.com ---- v2: adapt wording per feedback from Andrii. |
||
|
Alan Maguire
|
222edc843c |
btf: Add BTF kind layout encoding to UAPI
BTF kind layouts provide information to parse BTF kinds. By separating parsing BTF from using all the information it provides, we allow BTF to encode new features even if they cannot be used by readers. This will be helpful in particular for cases where older tools are used to parse newer BTF with kinds the older tools do not recognize; the BTF can still be parsed in such cases using kind layout. The intent is to support encoding of kind layouts optionally so that tools like pahole can add this information. For each kind, we record - length of singular element following struct btf_type - length of each of the btf_vlen() elements following - a (currently unused) flags field The ideas here were discussed at [1], [2]; hence Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260326145444.2076244-2-alan.maguire@oracle.com [1] https://lore.kernel.org/bpf/CAEf4BzYjWHRdNNw4B=eOXOs_ONrDwrgX4bn=Nuc1g8JPFC34MA@mail.gmail.com/ [2] https://lore.kernel.org/bpf/20230531201936.1992188-1-alan.maguire@oracle.com/ |
||
|
Thomas Weißschuh
|
d2d7561dc6 |
tools uapi headers: add linux/module_signature.h
This header is going to be used from scripts/sign-file. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Nicolas Schier <nsc@kernel.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> |
||
|
Arnaldo Carvalho de Melo
|
3c71ae8ec9 |
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
|
||
|
Christian Brauner
|
fc1a05de00 |
tools: update mount.h header
Update the mount.h header so we can rely on it in the selftests. Link: https://patch.msgid.link/20260122-work-fsmount-namespace-v1-4-5ef0a886e646@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Arnaldo Carvalho de Melo
|
c9d77f0a0c |
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
Picking up the changes from these csets: |
||
|
Arnaldo Carvalho de Melo
|
9cd284105b |
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in: |
||
|
Arnaldo Carvalho de Melo
|
ecd5a2fd4c |
perf beauty: Update the linux/perf_event.h copy with the kernel sources
Update it as one comment got realigned, probably in a merge, so no
changes in perf tooling, just silences this build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Linus Torvalds
|
4d84667627 |
Merge tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
||
|
Linus Torvalds
|
f17b474e36 |
Merge tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
|
||
|
Linus Torvalds
|
dd466ea002 |
Merge tag 'vfs-7.0-rc1.fserror' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs error reporting updates from Christian Brauner: "This contains the changes to support generic I/O error reporting. Filesystems currently have no standard mechanism for reporting metadata corruption and file I/O errors to userspace via fsnotify. Each filesystem (xfs, ext4, erofs, f2fs, etc.) privately defines EFSCORRUPTED, and error reporting to fanotify is inconsistent or absent entirely. This introduces a generic fserror infrastructure built around struct super_block that gives filesystems a standard way to queue metadata and file I/O error reports for delivery to fsnotify. Errors are queued via mempools and queue_work to avoid holding filesystem locks in the notification path; unmount waits for pending events to drain. A new super_operations::report_error callback lets filesystem drivers respond to file I/O errors themselves (to be used by an upcoming XFS self-healing patchset). On the uapi side, EFSCORRUPTED and EUCLEAN are promoted from private per-filesystem definitions to canonical errno.h values across all architectures" * tag 'vfs-7.0-rc1.fserror' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: ext4: convert to new fserror helpers xfs: translate fsdax media errors into file "data lost" errors when convenient xfs: report fs metadata errors via fsnotify iomap: report file I/O errors to the VFS fs: report filesystem and file I/O errors to fsnotify uapi: promote EFSCORRUPTED and EUCLEAN to errno.h |
||
|
Matt Bobrowski
|
752b807028 |
bpf: add new BPF_CGROUP_ITER_CHILDREN control option
Currently, the BPF cgroup iterator supports walking descendants in either pre-order (BPF_CGROUP_ITER_DESCENDANTS_PRE) or post-order (BPF_CGROUP_ITER_DESCENDANTS_POST). These modes perform an exhaustive depth-first search (DFS) of the hierarchy. In scenarios where a BPF program may need to inspect only the direct children of a given parent cgroup, a full DFS is unnecessarily expensive. This patch introduces a new BPF cgroup iterator control option, BPF_CGROUP_ITER_CHILDREN. This control option restricts the traversal to the immediate children of a specified parent cgroup, allowing for more targeted and efficient iteration, particularly when exhaustive depth-first search (DFS) traversal is not required. Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Link: https://lore.kernel.org/r/20260127085112.3608687-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Menglong Dong
|
2d419c4465 |
bpf: add fsession support
The fsession is something that similar to kprobe session. It allow to attach a single BPF program to both the entry and the exit of the target functions. Introduce the struct bpf_fsession_link, which allows to add the link to both the fentry and fexit progs_hlist of the trampoline. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Co-developed-by: Leon Hwang <leon.hwang@linux.dev> Signed-off-by: Leon Hwang <leon.hwang@linux.dev> Link: https://lore.kernel.org/r/20260124062008.8657-2-dongml2@chinatelecom.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Dapeng Mi
|
d2bdcde962 |
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
With the introduction of the OMR feature, the PEBS memory auxiliary info field for load and store latency events has been restructured for DMR. The memory auxiliary info field's bit[8] indicates whether a L2 cache miss occurred for a memory load or store instruction. If bit[8] is 0, it signifies no L2 cache miss, and bits[7:0] specify the exact cache data source (up to the L2 cache level). If bit[8] is 1, bits[7:0] represent the OMR encoding, indicating the specific L3 cache or memory region involved in the memory access. A significant enhancement is OMR encoding provides up to 8 fine-grained memory regions besides the cache region. A significant enhancement for OMR encoding is the ability to provide up to 8 fine-grained memory regions in addition to the cache region, offering more detailed insights into memory access regions. For detailed information on the memory auxiliary info encoding, please refer to section 16.2 "PEBS LOAD LATENCY AND STORE LATENCY FACILITY" in the ISE documentation. This patch ensures that the PEBS memory auxiliary info field is correctly interpreted and utilized in DMR. Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260114011750.350569-3-dapeng1.mi@linux.intel.com |
||
|
Alexei Starovoitov
|
e3d0dbb3b5 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc5
Cross-merge BPF and other fixes after downstream PR. No conflicts. Adjacent: Auto-merging MAINTAINERS Auto-merging Makefile Auto-merging kernel/bpf/verifier.c Auto-merging kernel/sched/ext.c Auto-merging mm/memcontrol.c Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Darrick J. Wong
|
6025447737 |
uapi: promote EFSCORRUPTED and EUCLEAN to errno.h
Stop definining these privately and instead move them to the uapi errno.h so that they become canonical instead of copy pasta. Cc: linux-api@vger.kernel.org Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Thomas Gleixner
|
2e4b28c48f |
treewide: Update email address
In a vain attempt to consolidate the email zoo switch everything to the kernel.org account. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Leon Hwang
|
2b421662c7 |
bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags
Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and check them for following APIs: * 'map_lookup_elem()' * 'map_update_elem()' * 'generic_map_lookup_batch()' * 'generic_map_update_batch()' And, get the correct value size for these APIs. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Leon Hwang <leon.hwang@linux.dev> Link: https://lore.kernel.org/r/20260107022022.12843-2-leon.hwang@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Namhyung Kim
|
eb06740187 |
tools headers: Sync syscall table with kernel sources
To pick up changes from:
|
||
|
Namhyung Kim
|
34524cde88 |
tools headers: Sync UAPI KVM headers with kernel sources
To pick up changes from: |
||
|
Namhyung Kim
|
be6c9e82c9 |
tools headers: Sync UAPI drm/drm.h with kernel sources
To pick up changes from:
|
||
|
Alexei Starovoitov
|
ec439c3801 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1
Cross-merge BPF and other fixes after downstream PR. Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
9e906a9dea |
Merge tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Perf event/metric description:
Unify all event and metric descriptions in JSON format. Now event
parsing and handling is greatly simplified by that.
From users point of view, perf list will provide richer information
about hardware events like the following.
$ perf list hw
List of pre-defined events (to be used in -e or -M):
legacy hardware:
branch-instructions
[Retired branch instructions [This event is an alias of branches]. Unit: cpu]
branch-misses
[Mispredicted branch instructions. Unit: cpu]
branches
[Retired branch instructions [This event is an alias of branch-instructions]. Unit: cpu]
bus-cycles
[Bus cycles,which can be different from total cycles. Unit: cpu]
cache-misses
[Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the
PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. Unit: cpu]
cache-references
[Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include
prefetches and coherency messages; again this depends on the design of your CPU. Unit: cpu]
cpu-cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cycles]. Unit: cpu]
cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cpu-cycles]. Unit: cpu]
instructions
[Retired instructions. Be careful,these can be affected by various issues,most notably hardware interrupt counts. Unit: cpu]
ref-cycles
[Total cycles; not affected by CPU frequency scaling. Unit: cpu]
But most notable changes would be in the perf stat. On the right side,
the default metrics are better named and aligned. :)
$ perf stat -- perf test -w noploop
Performance counter stats for 'perf test -w noploop':
11 context-switches # 10.8 cs/sec cs_per_second
0 cpu-migrations # 0.0 migrations/sec migrations_per_second
3,612 page-faults # 3532.5 faults/sec page_faults_per_second
1,022.51 msec task-clock # 1.0 CPUs CPUs_utilized
110,466 branch-misses # 0.0 % branch_miss_rate (88.66%)
6,934,452,104 branches # 6781.8 M/sec branch_frequency (88.66%)
4,657,032,590 cpu-cycles # 4.6 GHz cycles_frequency (88.65%)
27,755,874,218 instructions # 6.0 instructions insn_per_cycle (89.03%)
TopdownL1 # 0.3 % tma_backend_bound
# 9.3 % tma_bad_speculation (89.05%)
# 9.7 % tma_frontend_bound (77.86%)
# 80.7 % tma_retiring (88.81%)
1.025318171 seconds time elapsed
1.013248000 seconds user
0.012014000 seconds sys
Deferred unwinding support:
With the kernel support (commit
|
||
|
Amery Hung
|
b5709f6d26 |
bpf: Support associating BPF program with struct_ops
Add a new BPF command BPF_PROG_ASSOC_STRUCT_OPS to allow associating a BPF program with a struct_ops map. This command takes a file descriptor of a struct_ops map and a BPF program and set prog->aux->st_ops_assoc to the kdata of the struct_ops map. The command does not accept a struct_ops program nor a non-struct_ops map. Programs of a struct_ops map is automatically associated with the map during map update. If a program is shared between two struct_ops maps, prog->aux->st_ops_assoc will be poisoned to indicate that the associated struct_ops is ambiguous. The pointer, once poisoned, cannot be reset since we have lost track of associated struct_ops. For other program types, the associated struct_ops map, once set, cannot be changed later. This restriction may be lifted in the future if there is a use case. A kernel helper bpf_prog_get_assoc_struct_ops() can be used to retrieve the associated struct_ops pointer. The returned pointer, if not NULL, is guaranteed to be valid and point to a fully updated struct_ops struct. For struct_ops program reused in multiple struct_ops map, the return will be NULL. prog->aux->st_ops_assoc is protected by bumping the refcount for non-struct_ops programs and RCU for struct_ops programs. Since it would be inefficient to track programs associated with a struct_ops map, every non-struct_ops program will bump the refcount of the map to make sure st_ops_assoc stays valid. For a struct_ops program, it is protected by RCU as map_free will wait for an RCU grace period before disassociating the program with the map. The helper must be called in BPF program context or RCU read-side critical section. struct_ops implementers should note that the struct_ops returned may not be initialized nor attached yet. The struct_ops implementer will be responsible for tracking and checking the state of the associated struct_ops map if the use case expects an initialized or attached struct_ops. Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20251203233748.668365-3-ameryhung@gmail.com |
||
|
Linus Torvalds
|
8f7aa3d3c7 |
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
||
|
Linus Torvalds
|
015e7b0b0e |
Merge tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov: - Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to test_progs runner (Alexis Lothoré) - Convert selftests/bpf/test_xsk to test_progs runner (Bastien Curutchet) - Replace bpf memory allocator with kmalloc_nolock() in bpf_local_storage (Amery Hung), and in bpf streams and range tree (Puranjay Mohan) - Introduce support for indirect jumps in BPF verifier and x86 JIT (Anton Protopopov) and arm64 JIT (Puranjay Mohan) - Remove runqslower bpf tool (Hoyeon Lee) - Fix corner cases in the verifier to close several syzbot reports (Eduard Zingerman, KaFai Wan) - Several improvements in deadlock detection in rqspinlock (Kumar Kartikeya Dwivedi) - Implement "jmp" mode for BPF trampoline and corresponding DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong) - Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul Chaignon) - Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel Borkmann) - Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko) - Optimize bpf_map_update_elem() for map-in-map types (Ritesh Oedayrajsingh Varma) - Introduce overwrite mode for BPF ring buffer (Xu Kuohai) * tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits) bpf: optimize bpf_map_update_elem() for map-in-map types bpf: make kprobe_multi_link_prog_run always_inline selftests/bpf: do not hardcode target rate in test_tc_edt BPF program selftests/bpf: remove test_tc_edt.sh selftests/bpf: integrate test_tc_edt into test_progs selftests/bpf: rename test_tc_edt.bpf.c section to expose program type selftests/bpf: Add success stats to rqspinlock stress test rqspinlock: Precede non-head waiter queueing with AA check rqspinlock: Disable spinning for trylock fallback rqspinlock: Use trylock fallback when per-CPU rqnode is busy rqspinlock: Perform AA checks immediately rqspinlock: Enclose lock/unlock within lock entry acquisitions bpf: Remove runqslower tool selftests/bpf: Remove usage of lsm/file_alloc_security in selftest bpf: Disable file_alloc_security hook bpf: check for insn arrays in check_ptr_alignment bpf: force BPF_F_RDONLY_PROG on insn array creation bpf: Fix exclusive map memory leak selftests/bpf: Make CS length configurable for rqspinlock stress test selftests/bpf: Add lock wait time stats to rqspinlock stress test ... |
||
|
Namhyung Kim
|
22b0ceee1c |
tools headers UAPI: Sync linux/perf_event.h for deferred callchains
It needs to sync with the kernel to support user space changes for the deferred callchains. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Linus Torvalds
|
6c26fbe8c9 |
Merge tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Callchain support:
- Add support for deferred user-space stack unwinding for perf,
enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86 (Josh
Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop() (Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF) and
Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates:
- Remove PC3 support from LunarLake (Zhang Rui)
- Add Pantherlake support (Zhang Rui)
- Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups (Dapeng Mi, Ingo Molnar, Peter
Zijlstra)"
* tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/x86/intel: Fix and clean up intel_pmu_drain_arch_pebs() type use
perf/x86/intel: Optimize PEBS extended config
perf/x86/intel: Check PEBS dyn_constraints
perf/x86/intel: Add a check for dynamic constraints
perf/x86/intel: Add counter group support for arch-PEBS
perf/x86/intel: Setup PEBS data configuration and enable legacy groups
perf/x86/intel: Update dyn_constraint base on PEBS event precise level
perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
perf/x86/intel: Process arch-PEBS records or record fragments
perf/x86/intel/ds: Factor out PEBS group processing code to functions
perf/x86/intel/ds: Factor out PEBS record processing code to functions
perf/x86/intel: Initialize architectural PEBS
perf/x86/intel: Correct large PEBS flag check
perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
perf/x86: Fix NULL event access and potential PEBS record loss
perf/x86: Remove redundant is_x86_event() prototype
entry,unwind/deferred: Fix unwind_reset_info() placement
unwind_user/x86: Fix arch=um build
perf: Support deferred user unwind
unwind_user/x86: Teach FP unwind about start of function
...
|
||
|
Linus Torvalds
|
415d34b92c |
Merge tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
|
||
|
Asbjørn Sloth Tønnesen
|
68e83f3472 |
tools: ynl-gen: add regeneration comment
Add a comment on regeneration to the generated files. The comment is placed after the YNL-GEN line[1], as to not interfere with ynl-regen.sh's detection logic. [1] and after the optional YNL-ARG line. Link: https://lore.kernel.org/r/aR5m174O7pklKrMR@zx2c4.com/ Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251120174429.390574-3-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
James Clark
|
80cdf20811 |
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
To pickup config4 changes. Tested-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: James Clark <james.clark@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Alexei Starovoitov
|
e47b68bda4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.18-rc5+
Cross-merge BPF and other fixes after downstream PR. Minor conflict in kernel/bpf/helpers.c Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jakub Kicinski
|
c99ebb6132 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.18-rc6). No conflicts, adjacent changes in: drivers/net/phy/micrel.c |
||
|
Anton Protopopov
|
b4ce5923e7 |
bpf, x86: add new map type: instructions array
On bpf(BPF_PROG_LOAD) syscall user-supplied BPF programs are
translated by the verifier into "xlated" BPF programs. During this
process the original instructions offsets might be adjusted and/or
individual instructions might be replaced by new sets of instructions,
or deleted.
Add a new BPF map type which is aimed to keep track of how, for a
given program, the original instructions were relocated during the
verification. Also, besides keeping track of the original -> xlated
mapping, make x86 JIT to build the xlated -> jitted mapping for every
instruction listed in an instruction array. This is required for every
future application of instruction arrays: static keys, indirect jumps
and indirect calls.
A map of the BPF_MAP_TYPE_INSN_ARRAY type must be created with a u32
keys and value of size 8. The values have different semantics for
userspace and for BPF space. For userspace a value consists of two
u32 values – xlated and jitted offsets. For BPF side the value is
a real pointer to a jitted instruction.
On map creation/initialization, before loading the program, each
element of the map should be initialized to point to an instruction
offset within the program. Before the program load such maps should
be made frozen. After the program verification xlated and jitted
offsets can be read via the bpf(2) syscall.
If a tracked instruction is removed by the verifier, then the xlated
offset is set to (u32)-1 which is considered to be too big for a valid
BPF program offset.
One such a map can, obviously, be used to track one and only one BPF
program. If the verification process was unsuccessful, then the same
map can be re-used to verify the program with a different log level.
However, if the program was loaded fine, then such a map, being
frozen in any case, can't be reused by other programs even after the
program release.
Example. Consider the following original and xlated programs:
Original prog: Xlated prog:
0: r1 = 0x0 0: r1 = 0
1: *(u32 *)(r10 - 0x4) = r1 1: *(u32 *)(r10 -4) = r1
2: r2 = r10 2: r2 = r10
3: r2 += -0x4 3: r2 += -4
4: r1 = 0x0 ll 4: r1 = map[id:88]
6: call 0x1 6: r1 += 272
7: r0 = *(u32 *)(r2 +0)
8: if r0 >= 0x1 goto pc+3
9: r0 <<= 3
10: r0 += r1
11: goto pc+1
12: r0 = 0
7: r6 = r0 13: r6 = r0
8: if r6 == 0x0 goto +0x2 14: if r6 == 0x0 goto pc+4
9: call 0x76 15: r0 = 0xffffffff8d2079c0
17: r0 = *(u64 *)(r0 +0)
10: *(u64 *)(r6 + 0x0) = r0 18: *(u64 *)(r6 +0) = r0
11: r0 = 0x0 19: r0 = 0x0
12: exit 20: exit
An instruction array map, containing, e.g., instructions [0,4,7,12]
will be translated by the verifier to [0,4,13,20]. A map with
index 5 (the middle of 16-byte instruction) or indexes greater than 12
(outside the program boundaries) would be rejected.
The functionality provided by this patch will be extended in consequent
patches to implement BPF Static Keys, indirect jumps, and indirect calls.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Samiullah Khawaja
|
c18d4b190a |
net: Extend NAPI threaded polling to allow kthread based busy polling
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to enable and disable threaded busy polling. When threaded busy polling is enabled for a NAPI, enable NAPI_STATE_THREADED also. When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to signal napi_complete_done not to rearm interrupts. Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread go to sleep. Signed-off-by: Samiullah Khawaja <skhawaja@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Martin Karsten <mkarsten@uwaterloo.ca> Tested-by: Martin Karsten <mkarsten@uwaterloo.ca> Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Christian Brauner
|
6fc9baa49d |
nsfs: update tools header
Ensure all the new uapi bits are visible for the selftests. Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-21-2e6f823ebdc0@kernel.org Tested-by: syzbot@syzkaller.appspotmail.com Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Arnaldo Carvalho de Melo
|
29e4d12a29 |
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in: |
||
|
Arnaldo Carvalho de Melo
|
f8950b47db |
tools headers UAPI: Update tools's copy of drm.h to pick DRM_IOCTL_GEM_CHANGE_HANDLE
Picking the changes from: |
||
|
Peter Zijlstra
|
c69993ecdd |
perf: Support deferred user unwind
Add support for deferred userspace unwind to perf. Where perf currently relies on in-place stack unwinding; from NMI context and all that. This moves the userspace part of the unwind to right before the return-to-userspace. This has two distinct benefits, the biggest is that it moves the unwind to a faultable context. It becomes possible to fault in debug info (.eh_frame, SFrame etc.) that might not otherwise be readily available. And secondly, it de-duplicates the user callchain where multiple samples happen during the same kernel entry. To facilitate this the perf interface is extended with a new record type: PERF_RECORD_CALLCHAIN_DEFERRED and two new attribute flags: perf_event_attr::defer_callchain - to request the user unwind be deferred perf_event_attr::defer_output - to request PERF_RECORD_CALLCHAIN_DEFERRED records The existing PERF_RECORD_SAMPLE callchain section gets a new context type: PERF_CONTEXT_USER_DEFERRED After which will come a single entry, denoting the 'cookie' of the deferred callchain that should be attached here, matching the 'cookie' field of the above mentioned PERF_RECORD_CALLCHAIN_DEFERRED. The 'defer_callchain' flag is expected on all events with PERF_SAMPLE_CALLCHAIN. The 'defer_output' flag is expect on the event responsible for collecting side-band events (like mmap, comm etc.). Setting 'defer_output' on multiple events will get you duplicated PERF_RECORD_CALLCHAIN_DEFERRED records. Based on earlier patches by Josh and Steven. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20251023150002.GR4067720@noisy.programming.kicks-ass.net |
||
|
Xu Kuohai
|
feeaf1346f |
bpf: Add overwrite mode for BPF ring buffer
When the BPF ring buffer is full, a new event cannot be recorded until one
or more old events are consumed to make enough space for it. In cases such
as fault diagnostics, where recent events are more useful than older ones,
this mechanism may lead to critical events being lost.
So add overwrite mode for BPF ring buffer to address it. In this mode, the
new event overwrites the oldest event when the buffer is full.
The basic idea is as follows:
1. producer_pos tracks the next position to record new event. When there
is enough free space, producer_pos is simply advanced by producer to
make space for the new event.
2. To avoid waiting for consumer when the buffer is full, a new variable,
overwrite_pos, is introduced for producer. It points to the oldest event
committed in the buffer. It is advanced by producer to discard one or more
oldest events to make space for the new event when the buffer is full.
3. pending_pos tracks the oldest event to be committed. pending_pos is never
passed by producer_pos, so multiple producers never write to the same
position at the same time.
The following example diagrams show how it works in a 4096-byte ring buffer.
1. At first, {producer,overwrite,pending,consumer}_pos are all set to 0.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| |
| |
| |
+-----------------------------------------------------------------------+
^
|
|
producer_pos = 0
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
2. Now reserve a 512-byte event A.
There is enough free space, so A is allocated at offset 0. And producer_pos
is advanced to 512, the end of A. Since A is not submitted, the BUSY bit is
set.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | |
| A | |
| [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 512
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
3. Reserve event B, size 1024.
B is allocated at offset 512 with BUSY bit set, and producer_pos is advanced
to the end of B.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | |
| A | B | |
| [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 1536
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
4. Reserve event C, size 2048.
C is allocated at offset 1536, and producer_pos is advanced to 3584.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| [BUSY] | [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 3584
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
5. Submit event A.
The BUSY bit of A is cleared. B becomes the oldest event to be committed, so
pending_pos is advanced to 512, the start of B.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| | [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | |
| pending_pos = 512 producer_pos = 3584
|
overwrite_pos = 0
consumer_pos = 0
6. Submit event B.
The BUSY bit of B is cleared, and pending_pos is advanced to the start of C,
which is now the oldest event to be committed.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| | | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | |
| pending_pos = 1536 producer_pos = 3584
|
overwrite_pos = 0
consumer_pos = 0
7. Reserve event D, size 1536 (3 * 512).
There are 2048 bytes not being written between producer_pos (currently 3584)
and pending_pos, so D is allocated at offset 3584, and producer_pos is advanced
by 1536 (from 3584 to 5120).
Since event D will overwrite all bytes of event A and the first 512 bytes of
event B, overwrite_pos is advanced to the start of event C, the oldest event
that is not overwritten.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| D End | | C | D Begin|
| [BUSY] | | [BUSY] | [BUSY] |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | pending_pos = 1536
| | overwrite_pos = 1536
| |
| producer_pos=5120
|
consumer_pos = 0
8. Reserve event E, size 1024.
Although there are 512 bytes not being written between producer_pos and
pending_pos, E cannot be reserved, as it would overwrite the first 512
bytes of event C, which is still being written.
9. Submit event C and D.
pending_pos is advanced to the end of D.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| D End | | C | D Begin|
| | | | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | overwrite_pos = 1536
| |
| producer_pos=5120
| pending_pos=5120
|
consumer_pos = 0
The performance data for overwrite mode will be provided in a follow-up
patch that adds overwrite-mode benchmarks.
A sample of performance data for non-overwrite mode, collected on an x86_64
CPU and an arm64 CPU, before and after this patch, is shown below. As we can
see, no obvious performance regression occurs.
- x86_64 (AMD EPYC 9654)
Before:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.623 ± 0.027M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 15.812 ± 0.014M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 7.871 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 6.703 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.896 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.054 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.864 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 1.580 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 1.484 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 1.369 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.316 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 1.272 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 1.239 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 1.226 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 1.213 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.193 ± 0.001M/s (drops 0.000 ± 0.000M/s)
After:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.845 ± 0.036M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 15.889 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 8.155 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 6.708 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.918 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.065 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.870 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 1.582 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 1.482 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 1.372 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.323 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 1.264 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 1.236 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 1.209 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 1.189 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.165 ± 0.002M/s (drops 0.000 ± 0.000M/s)
- arm64 (HiSilicon Kunpeng 920)
Before:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.310 ± 0.623M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 9.947 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 6.634 ± 0.011M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 4.502 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 3.888 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.372 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 3.189 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.998 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 3.086 ± 0.018M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.845 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.815 ± 0.008M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.771 ± 0.009M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.814 ± 0.011M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.752 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.695 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 2.710 ± 0.006M/s (drops 0.000 ± 0.000M/s)
After:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.283 ± 0.550M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 9.993 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 6.898 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 5.257 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 3.830 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.528 ± 0.013M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 3.265 ± 0.018M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.990 ± 0.007M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.929 ± 0.014M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.898 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.818 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.789 ± 0.012M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.770 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.651 ± 0.007M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.669 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 2.695 ± 0.009M/s (drops 0.000 ± 0.000M/s)
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251018035738.4039621-2-xukuohai@huaweicloud.com
|
||
|
Mykyta Yatsenko
|
531b87d865 |
bpf: widen dynptr size/offset to 64 bit
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient for file-backed use cases; even 32 bits can be limiting. Refactor dynptr helpers/kfuncs to use 64-bit size and offset, ensuring consistency across the APIs. This change does not affect internals of xdp, skb or other dynptrs, which continue to behave as before. Also it does not break binary compatibility. The widening enables large-file access support via dynptr, implemented in the next patches. Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Kuniyuki Iwashima
|
38163af068 |
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
If a socket has sk->sk_bypass_prot_mem flagged, the socket opts out
of the global protocol memory accounting.
This is easily controlled by net.core.bypass_prot_mem sysctl, but it
lacks flexibility.
Let's support flagging (and clearing) sk->sk_bypass_prot_mem via
bpf_setsockopt() at the BPF_CGROUP_INET_SOCK_CREATE hook.
int val = 1;
bpf_setsockopt(ctx, SOL_SOCKET, SK_BPF_BYPASS_PROT_MEM,
&val, sizeof(val));
As with net.core.bypass_prot_mem, this is inherited to child sockets,
and BPF always takes precedence over sysctl at socket(2) and accept(2).
SK_BPF_BYPASS_PROT_MEM is only supported at BPF_CGROUP_INET_SOCK_CREATE
and not supported on other hooks for some reasons:
1. UDP charges memory under sk->sk_receive_queue.lock instead
of lock_sock()
2. Modifying the flag after skb is charged to sk requires such
adjustment during bpf_setsockopt() and complicates the logic
unnecessarily
We can support other hooks later if a real use case justifies that.
Most changes are inline and hard to trace, but a microbenchmark on
__sk_mem_raise_allocated() during neper/tcp_stream showed that more
samples completed faster with sk->sk_bypass_prot_mem == 1. This will
be more visible under tcp_mem pressure (but it's not a fair comparison).
# bpftrace -e 'kprobe:__sk_mem_raise_allocated { @start[tid] = nsecs; }
kretprobe:__sk_mem_raise_allocated /@start[tid]/
{ @end[tid] = nsecs - @start[tid]; @times = hist(@end[tid]); delete(@start[tid]); }'
# tcp_stream -6 -F 1000 -N -T 256
Without bpf prog:
[128, 256) 3846 | |
[256, 512) 1505326 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1371006 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 198207 |@@@@@@ |
[2K, 4K) 31199 |@ |
With bpf prog in the next patch:
(must be attached before tcp_stream)
# bpftool prog load sk_bypass_prot_mem.bpf.o /sys/fs/bpf/test type cgroup/sock_create
# bpftool cgroup attach /sys/fs/cgroup/test cgroup_inet_sock_create pinned /sys/fs/bpf/test
[128, 256) 6413 | |
[256, 512) 1868425 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1101697 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 117031 |@@@@ |
[2K, 4K) 11773 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-6-kuniyu@google.com
|
||
|
Linus Torvalds
|
fbde105f13 |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
||
|
Linus Torvalds
|
ec714e371f |
Merge tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Extended 'perf annotate' with DWARF type information
(--code-with-type) integration in the TUI, including a 'T'
hotkey to toggle it
- Enhanced 'perf bench mem' with new mmap() workloads and control
over page/chunk sizes
- Fix 'perf stat' error handling to correctly display unsupported
events
- Improved support for Clang cross-compilation
- Refactored LLVM and Capstone disasm for modularity
- Introduced the :X modifier to exclude an event from automatic
regrouping
- Adjusted KVM sampling defaults to use the "cycles" event to prevent
failures
- Added comprehensive support for decoding PowerPC Dispatch Trace Log
(DTL)
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details
- Synchronized Intel PMU events and metrics with TMA 5.1 across
multiple processor generations
- Converted dependencies like libperl and libtracefs to be opt-in
- Handle more Rust symbols in kallsyms ('N', debugging)
- Improve the python binding to allow for python based tools to use
more of the libraries, add a 'ilist' utility to test those new
bindings
- Various 'perf test' fixes
- Kan Liang no longer a perf tools reviewer
* tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (192 commits)
perf tools: Fix arm64 libjvmti build by generating unistd_64.h
perf tests: Don't retest sections in "Object code reading"
perf docs: Document building with Clang
perf build: Support build with clang
perf test coresight: Dismiss clang warning for unroll loop thread
perf test coresight: Dismiss clang warning for thread loop
perf test coresight: Dismiss clang warning for memcpy thread
perf build: Disable thread safety analysis for perl header
perf build: Correct CROSS_ARCH for clang
perf python: split Clang options when invoking Popen
tools build: Align warning options with perf
perf disasm: Remove unused evsel from 'struct annotate_args'
perf srcline: Fallback between addr2line implementations
perf disasm: Make ins__scnprintf() and ins__is_nop() static
perf dso: Clean up read_symbol() error handling
perf dso: Support BPF programs in dso__read_symbol()
perf dso: Move read_symbol() from llvm/capstone to dso
perf llvm: Reduce LLVM initialization
perf check: Add libLLVM feature
perf parse-events: Fix parsing of >30kb event strings
...
|