Running both tests cases 126 128 together causes the first test case
126 to fail:
# for i in $(seq 3); do ./perf test 'perf trace BTF general tests' \
'perf trace record and replay'; done
126: perf trace BTF general tests : FAILED!
128: perf trace record and replay : Ok
126: perf trace BTF general tests : FAILED!
128: perf trace record and replay : Ok
126: perf trace BTF general tests : FAILED!
128: perf trace record and replay : Ok
#
Test case 126 fails because test case 128 runs concurrently as can
be observed using a ps -ef | grep perf output list on a different
window. Both do a perf trace command concurrently.
Make test case 'perf trace BTF general tests' exclusive.
Output after:
# for i in $(seq 3); do ./perf test 'perf trace BTF general tests' \
'perf trace record and replay'; done
127: perf trace BTF general tests : Ok
155: perf trace record and replay : Ok
127: perf trace BTF general tests : Ok
155: perf trace record and replay : Ok
127: perf trace BTF general tests : Ok
155: perf trace record and replay : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In "bpf: Disallow freplace on XDP with mismatched xdp_has_frags values" [1],
this XDP test is suggested to add to xdp.py.
1. Verify the failure of updating frag-capable prog with non-frag-capable
prog, when the frag-capable prog attaches to mtu=9k driver.
The test has been verified against Mellanox CX6 and Intel 82599ES NICs.
With dropping other tests, here is the test log.
# ethtool -i eth0
driver: mlx5_core
version: 6.19.0-061900-generic
# NETIF=eth0 python3 xdp.py
TAP version 13
1..1
ok 1 xdp.test_xdp_native_update_mb_to_sb
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
# ethtool -i eth0
driver: ixgbe
version: 6.19.0-061900-generic
# NETIF=eth0 python3 xdp.py
TAP version 13
1..1
# CMD: ip link set dev eth0 xdpdrv obj /path/to/tools/testing/selftests/net/lib/xdp_dummy.bpf.o sec xdp.frags
# EXIT: 2
# STDERR: RTNETLINK answers: Invalid argument
ok 1 xdp.test_xdp_native_update_mb_to_sb # SKIP device does not support multi-buffer XDP
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Leon Hwang <leon.huangfu@shopee.com>
Link: https://patch.msgid.link/20260406072655.368173-1-leon.huangfu@shopee.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
use_stdio was associated with struct perf_data and not perf_data_file
meaning there was implicit use of fd rather than fptr that may not be
safe. For example, in perf_data_file__write. Reorganize perf_data_file
to better abstract use_stdio, add kernel-doc and more consistently use
perf_data__ accessors so that use_stdio is better respected.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As noticed in a sashiko review for a patch adding a missing libgen.h
in a file using basename():
https://sashiko.dev/#/patchset/20260402001740.2220481-1-acme%40kernel.org
So avoid these subtleties and instead reuse the gnu_basename() function
we had in srcline.c, renaming it to perf_basename() and replace
basename() calls with it, simplifying several cases by removing now
needless strdups.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Instead of using zalloc(nr_entries * sizeof_entry) that is what calloc()
does.
In some places where linux/zalloc.h isn't needed, remove it, add when
needed and was getting it indirectly.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As suggested in an unrelated sashiko review:
https://sashiko.dev/#/patchset/20260407195145.2372104-1-acme%40kernel.org
"
Could a malformed perf.data file provide out-of-bounds values for cpu and
domain?
These variables are read directly from the file and used as indices for
cd_map and cd_map[cpu]->domains without any validation against
env->nr_cpus_avail or max_sched_domains.
Similar to the issue above, this is an existing lack of validation that
becomes apparent when looking at the allocation boundaries.
"
Validate it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Sashiko suggests we use some reasonable max number of args to avoid
overflows when reading perf.data files, do it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Those tables and variables don't change, better capture this by
explicitely using 'const'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In fef2a73516 ("perf tools: Kill die()") the die() function was
removed, but not the prototype in util.h, now when building with
LIBPERL=1, during a 'make -C tools/perf build-test' routine test, it is
failing as perl likes die() calls and then this clashes with this
remnant, remove it.
Fixes: fef2a73516 ("perf tools: Kill die()")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-04-08
1) Update outdated comment in xfrm_dst_check().
From kexinsun.
2) Drop support for HMAC-RIPEMD-160 from IPsec.
From Eric Biggers.
* tag 'ipsec-next-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Drop support for HMAC-RIPEMD-160
xfrm: update outdated comment
====================
Link: https://patch.msgid.link/20260408094258.148555-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report an error for './runner foo' (positional arg instead of -t) and
for './runner -t foo' when the filter matches no tests. Previously both
cases produced no error output.
Pre-scan the test list before the main loop so the error is reported
immediately, avoiding spurious SKIP output from '-s' when no tests
match.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When an parent is copied into a child the name array is populated in
address not name order. Make sure the name array isn't flagged as sorted.
Fixes: 659ad3492b ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When an entry in the address array is replaced, the corresponding name
entry is replaced. The entries names may sort differently and so it is
important that the sorted by name property be cleared on the maps.
Fixes: 0d11fab327 ("perf maps: Fixup maps_by_name when modifying maps_by_address")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Getting debug_file can trigger warnings if not set. Avoid getting
these warnings by pushing the use under the controlling if.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove global variable addr2line_timeout_ms and add it as a member
to symbol_conf structure.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
[namhyung: move the initialization to util/symbol.c]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Make symbol_conf::addr2line_disable_warn configurable by reading
the perfconfig file.
Use section core and addr2line-disable-warn = value.
Update documentation.
Example:
# perf config -l
core.addr2line-timeout=5000
core.addr2line-disable-warn=1
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rename member symbol_conf::disable_add2line_warn to
symbol_conf::addr2line_disable_warn to make it consistent with other
addr2line_xxx constants.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Introduce a new stress test to check for race conditions in the
nfnetlink_queue subsystem, where an entry is freed while another CPU is
concurrently walking the global rhashtable.
To trigger this, `nf_queue.c` is extended with two new flags:
* -O (out-of-order): Buffers packet IDs and flushes them in reverse.
* -b (bogus verdicts): Floods the kernel with non-existent packet IDs.
The bogus verdict loop forces the kernel's lookup function to perform
full rhashtable bucket traversals (-ENOENT). Combined with reverse-order
flushing and heavy parallel UDP/ping flooding across 8 queues, this puts
the nfnetlink_queue code under pressure.
Joint work with Florian Westphal.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
* kvm-arm64/misc-7.1:
KVM: arm64: selftests: Avoid testing the IMPDEF behavior
KVM: arm64: Destroy stage-2 page-table in kvm_arch_destroy_vm()
KVM: arm64: Don't leave mmu->pgt dangling on kvm_init_stage2_mmu() error
KVM: arm64: Prevent the host from using an smc with imm16 != 0
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/vgic-fixes-7.1:
: .
: FIrst pass at fixing a number of vgic-v5 bugs that were found
: after the merge of the initial series.
: .
KVM: arm64: Advertise ID_AA64PFR2_EL1.GCIE
KVM: arm64: vgic-v5: Fold PPI state for all exposed PPIs
KVM: arm64: set_id_regs: Allow GICv3 support to be set at runtime
KVM: arm64: Don't advertises GICv3 in ID_PFR1_EL1 if AArch32 isn't supported
KVM: arm64: Correctly plumb ID_AA64PFR2_EL1 into pkvm idreg handling
KVM: arm64: Move GICv5 timer PPI validation into timer_irqs_are_valid()
KVM: arm64: Remove evaluation of timer state in kvm_cpu_has_pending_timer()
KVM: arm64: Kill arch_timer_context::direct field
KVM: arm64: vgic-v5: Correctly set dist->ready once initialised
KVM: arm64: vgic-v5: Make the effective priority mask a strict limit
KVM: arm64: vgic-v5: Cast vgic_apr to u32 to avoid undefined behaviours
KVM: arm64: vgic-v5: Transfer edge pending state to ICH_PPI_PENDRx_EL2
KVM: arm64: vgic-v5: Hold config_lock while finalizing GICv5 PPIs
KVM: arm64: Account for RESx bits in __compute_fgt()
KVM: arm64: Fix writeable mask for ID_AA64PFR2_EL1
arm64: Fix field references for ICH_PPI_DVIR[01]_EL2
KVM: arm64: Don't skip per-vcpu NV initialisation
KVM: arm64: vgic: Don't reset cpuif/redist addresses at finalize time
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/vgic-v5-ppi: (40 commits)
: .
: Add initial GICv5 support for KVM guests, only adding PPI support
: for the time being. Patches courtesy of Sascha Bischoff.
:
: From the cover letter:
:
: "This is v7 of the patch series to add the virtual GICv5 [1] device
: (vgic_v5). Only PPIs are supported by this initial series, and the
: vgic_v5 implementation is restricted to the CPU interface,
: only. Further patch series are to follow in due course, and will add
: support for SPIs, LPIs, the GICv5 IRS, and the GICv5 ITS."
: .
KVM: arm64: selftests: Add no-vgic-v5 selftest
KVM: arm64: selftests: Introduce a minimal GICv5 PPI selftest
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
Documentation: KVM: Introduce documentation for VGICv5
KVM: arm64: gic-v5: Probe for GICv5 device
KVM: arm64: gic-v5: Set ICH_VCTLR_EL2.En on boot
KVM: arm64: gic-v5: Introduce kvm_arm_vgic_v5_ops and register them
KVM: arm64: gic-v5: Hide FEAT_GCIE from NV GICv5 guests
KVM: arm64: gic: Hide GICv5 for protected guests
KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
irqchip/gic-v5: Introduce minimal irq_set_type() for PPIs
KVM: arm64: gic-v5: Initialise ID and priority bits when resetting vcpu
KVM: arm64: gic-v5: Create and initialise vgic_v5
KVM: arm64: gic-v5: Support GICv5 interrupts with KVM_IRQ_LINE
KVM: arm64: gic-v5: Implement direct injection of PPIs
KVM: arm64: Introduce set_direct_injection irq_op
KVM: arm64: gic-v5: Trap and mask guest ICC_PPI_ENABLERx_EL1 writes
KVM: arm64: gic-v5: Check for pending PPIs
KVM: arm64: gic-v5: Clear TWI if single task running
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/hyp-tracing: (40 commits)
: .
: EL2 tracing support, adding both 'remote' ring-buffer
: infrastructure and the tracing itself, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "The growing set of features supported by the hypervisor in protected
: mode necessitates debugging and profiling tools. Tracefs is the
: ideal candidate for this task:
:
: * It is simple to use and to script.
:
: * It is supported by various tools, from the trace-cmd CLI to the
: Android web-based perfetto.
:
: * The ring-buffer, where are stored trace events consists of linked
: pages, making it an ideal structure for sharing between kernel and
: hypervisor.
:
: This series first introduces a new generic way of creating remote events and
: remote buffers. Then it adds support to the pKVM hypervisor."
: .
tracing: selftests: Extend hotplug testing for trace remotes
tracing: Non-consuming read for trace remotes with an offline CPU
tracing: Adjust cmd_check_undefined to show unexpected undefined symbols
tracing: Restore accidentally removed SPDX tag
KVM: arm64: avoid unused-variable warning
tracing: Generate undef symbols allowlist for simple_ring_buffer
KVM: arm64: tracing: add ftrace dependency
tracing: add more symbols to whitelist
tracing: Update undefined symbols allow list for simple_ring_buffer
KVM: arm64: Fix out-of-tree build for nVHE/pKVM tracing
tracing: selftests: Add hypervisor trace remote tests
KVM: arm64: Add selftest event support to nVHE/pKVM hyp
KVM: arm64: Add hyp_enter/hyp_exit events to nVHE/pKVM hyp
KVM: arm64: Add event support to the nVHE/pKVM hyp and trace remote
KVM: arm64: Add trace reset to the nVHE/pKVM hyp
KVM: arm64: Sync boot clock with the nVHE/pKVM hyp
KVM: arm64: Add trace remote for the nVHE/pKVM hyp
KVM: arm64: Add tracing capability for the nVHE/pKVM hyp
KVM: arm64: Support unaligned fixmap in the pKVM hyp
KVM: arm64: Initialise hyp_nr_cpus for nVHE hyp
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a selftest that verifies the dst_cache in seg6 lwtunnel is not
shared between the input (forwarding) and output (locally generated)
paths.
The test creates three namespaces (ns_src, ns_router, ns_dst)
connected in a line. An SRv6 encap route on ns_router encapsulates
traffic destined to cafe::1 with SID fc00::100. The SID is
reachable only for forwarded traffic (from ns_src) via an ip rule
matching the ingress interface (iif veth-r0 lookup 100), and
blackholed in the main table.
The test verifies that:
1. A packet generated locally on ns_router does not reach
ns_dst with an empty cache, since the SID is blackholed;
2. A forwarded packet from ns_src populates the input cache
from table 100 and reaches ns_dst;
3. A packet generated locally on ns_router still does not
reach ns_dst after the input cache is populated,
confirming the output path does not reuse the input
cache entry.
Both the forwarded and local packets are pinned to the same CPU
with taskset, since dst_cache is per-cpu.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The querier-interval test adds h1 (currently a slave of the VRF created
by simple_if_init) to a temporary bridge br1 acting as an outside IGMP
querier. The kernel VRF driver (drivers/net/vrf.c) calls cycle_netdev()
on every slave add and remove, toggling the interface admin-down then up.
Phylink takes the PHY down during the admin-down half of that cycle.
Since h1 and swp1 are cable-connected, swp1 also loses its link may need
several seconds to re-negotiate.
Use setup_wait_dev $h1 0 which waits for h1 to return to UP state, so the
test can rely on the link being back up at this point.
Fixes: 4d8610ee8b ("selftests: net: bridge: add vlan mcast_querier_interval tests")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/c830f130860fd2efae08bfb9e5b25fd028e58ce5.1775424423.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf_fentry_shadow_test exists in both vmlinux (net/bpf/test_run.c) and
bpf_testmod (bpf_testmod.c), creating a duplicate symbol condition when
bpf_testmod is loaded. Add subtests that verify kprobe behavior with
this duplicate symbol:
In attach_probe:
- dup-sym-{default,legacy,perf,link}: unqualified attach succeeds
across all four modes, preferring vmlinux over module shadow.
- MOD:SYM qualification attaches to the module version.
In kprobe_multi_test:
- dup_sym: kprobe_multi attach with kprobe and kretprobe succeeds.
bpf_fentry_shadow_test is not invoked via test_run, so tests verify
attach and detach succeed without triggering the probe.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Link: https://lore.kernel.org/r/20260407203912.1787502-3-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* Add enforce_fs() for defining and enforcing a ruleset in one step
* In some places, dropped "ASSERT_LE(0, fd)" checks after
create_ruleset() call -- create_ruleset() already checks that.
* In some places, rename "file_fd" to "fd" if it is not needed to
disambiguate any more.
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260327164838.38231-12-gnoack3000@gmail.com
[mic: Tweak subjet]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Even when a process is restricted with the new
LANDLOCK_ACCESS_FS_RESOLVE_UNIX right, the kernel can continue writing
its coredump to the configured coredump socket.
In the test, we create a local server and rewire the system to write
coredumps into it. We then create a child process within a Landlock
domain where LANDLOCK_ACCESS_FS_RESOLVE_UNIX is restricted and make
the process crash. The test uses SO_PEERCRED to check that the
connecting client process is the expected one.
Includes a fix by Mickaël Salaün for setting the EUID to 0 (see [1]).
Link[1]: https://lore.kernel.org/all/20260218.ohth8theu8Yi@digikod.net/
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260327164838.38231-11-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add an audit test to check that Landlock denials from
LANDLOCK_ACCESS_FS_RESOLVE_UNIX result in audit logs in the expected
format. (There is one audit test for each filesystem access right, so
we should add one for LANDLOCK_ACCESS_FS_RESOLVE_UNIX as well.)
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260327164838.38231-10-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
* Extract common helpers from an existing IOCTL test that
also uses pathname unix(7) sockets.
* These tests use the common scoped domains fixture which is also used
in other Landlock scoping tests and which was used in Tingmao Wang's
earlier patch set in [1].
These tests exercise the cross product of the following scenarios:
* Stream connect(), Datagram connect(), Datagram sendmsg() and
Seqpacket connect().
* Child-to-parent and parent-to-child communication
* The Landlock policy configuration as listed in the scoped_domains
fixture.
* In the default variant, Landlock domains are only placed where
prescribed in the fixture.
* In the "ALL_DOMAINS" variant, Landlock domains are also placed in
the places where the fixture says to omit them, but with a
LANDLOCK_RULE_PATH_BENEATH that allows connection.
Cc: Justin Suess <utilityemal77@gmail.com>
Cc: Tingmao Wang <m@maowtm.org>
Cc: Mickaël Salaün <mic@digikod.net>
Link[1]: https://lore.kernel.org/all/53b9883648225d5a08e82d2636ab0b4fda003bc9.1767115163.git.m@maowtm.org/
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260327164838.38231-9-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The access_fs_16 variable was originally intended to stay frozen at 16
access rights so that audit tests would not need updating when new
access rights are added. Now that we have 17 access rights, the name
is confusing.
Replace all uses of access_fs_16 with ACCESS_ALL and delete the
variable.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260327164838.38231-8-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
* Add a new access right LANDLOCK_ACCESS_FS_RESOLVE_UNIX, which
controls the lookup operations for named UNIX domain sockets. The
resolution happens during connect() and sendmsg() (depending on
socket type).
* Change access_mask_t from u16 to u32 (see below)
* Hook into the path lookup in unix_find_bsd() in af_unix.c, using a
LSM hook. Make policy decisions based on the new access rights
* Increment the Landlock ABI version.
* Minor test adaptations to keep the tests working.
* Document the design rationale for scoped access rights,
and cross-reference it from the header documentation.
With this access right, access is granted if either of the following
conditions is met:
* The target socket's filesystem path was allow-listed using a
LANDLOCK_RULE_PATH_BENEATH rule, *or*:
* The target socket was created in the same Landlock domain in which
LANDLOCK_ACCESS_FS_RESOLVE_UNIX was restricted.
In case of a denial, connect() and sendmsg() return EACCES, which is
the same error as it is returned if the user does not have the write
bit in the traditional UNIX file system permissions of that file.
The access_mask_t type grows from u16 to u32 to make space for the new
access right. This also doubles the size of struct layer_access_masks
from 32 byte to 64 byte. To avoid memory layout inconsistencies between
architectures (especially m68k), pack and align struct access_masks [2].
Document the (possible future) interaction between scoped flags and
other access rights in struct landlock_ruleset_attr, and summarize the
rationale, as discussed in code review leading up to [3].
This feature was created with substantial discussion and input from
Justin Suess, Tingmao Wang and Mickaël Salaün.
Cc: Tingmao Wang <m@maowtm.org>
Cc: Justin Suess <utilityemal77@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Suggested-by: Jann Horn <jannh@google.com>
Link[1]: https://github.com/landlock-lsm/linux/issues/36
Link[2]: https://lore.kernel.org/all/20260401.Re1Eesu1Yaij@digikod.net/
Link[3]: https://lore.kernel.org/all/20260205.8531e4005118@gnoack.org/
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20260327164838.38231-5-gnoack3000@gmail.com
[mic: Fix kernel-doc formatting, pack and align access_masks]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Domain deallocation records are emitted asynchronously from kworker
threads (via free_ruleset_work()). Stale deallocation records from a
previous test can arrive during the current test's deallocation read
loop and be picked up by audit_match_record() instead of the expected
record, causing a domain ID mismatch. The audit.layers test (which
creates 16 nested domains) is particularly vulnerable because it reads
16 deallocation records in sequence, providing a large window for stale
records to interleave.
The same issue affects audit_flags.signal, where deallocation records
from a previous test (audit.layers) can leak into the next test and be
picked up by audit_match_record() instead of the expected record.
Fix this by continuing to read records when the type matches but the
content pattern does not. Stale records are silently consumed, and the
loop only stops when both type and pattern match (or the socket times
out with -EAGAIN).
Additionally, extend matches_log_domain_deallocated() with an
expected_domain_id parameter. When set, the regex pattern includes the
specific domain ID as a literal hex value, so that deallocation records
for a different domain do not match the pattern at all. This handles
the case where the stale record has the same denial count as the
expected one (e.g. both have denials=1), which the type+pattern loop
alone cannot distinguish. Callers that already know the expected domain
ID (from a prior denial or allocation record) now pass it to filter
precisely.
When expected_domain_id is set, matches_log_domain_deallocated() also
temporarily increases the socket timeout to audit_tv_dom_drop (1 second)
to wait for the asynchronous kworker deallocation, and restores
audit_tv_default afterward. This removes the need for callers to manage
the timeout switch manually.
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Fixes: 6a500b2297 ("selftests/landlock: Add tests for audit flags and domain IDs")
Link: https://lore.kernel.org/r/20260402192608.1458252-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Non-audit Landlock tests generate audit records as side effects when
audit_enabled is non-zero (e.g. from boot configuration). These records
accumulate in the kernel audit backlog while no audit daemon socket is
open. When the next test opens a new netlink socket and registers as
the audit daemon, the stale backlog is delivered, causing baseline
record count checks to fail spuriously.
Fix this by draining all pending records in audit_init() right after
setting the receive timeout. The 1-usec SO_RCVTIMEO causes audit_recv()
to return -EAGAIN once the backlog is empty, naturally terminating the
drain loop.
Domain deallocation records are emitted asynchronously from a work
queue, so they may still arrive after the drain. Remove records.domain
== 0 checks that are not preceded by audit_match_record() calls, which
would otherwise consume stale records before the count. Document this
constraint above audit_count_records().
Increasing the drain timeout to catch in-flight deallocation records was
considered but rejected: a longer timeout adds latency to every
audit_init() call even when no stale record is pending, and any fixed
timeout is still not guaranteed to catch all records under load.
Removing the unprotected checks is simpler and avoids the spurious
failures.
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Fixes: 6a500b2297 ("selftests/landlock: Add tests for audit flags and domain IDs")
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260402192608.1458252-4-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
audit_init() opens a netlink socket and configures it, but leaks the
file descriptor if audit_set_status() or setsockopt() fails. Fix this
by jumping to an error path that closes the socket before returning.
Apply the same fix to audit_init_with_exe_filter(), which leaks the file
descriptor from audit_init() if audit_init_filter_exe() or
audit_filter_exe() fails, and to audit_cleanup(), which leaks it if
audit_init_filter_exe() fails in FIXTURE_TEARDOWN_PARENT().
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Fixes: 6a500b2297 ("selftests/landlock: Add tests for audit flags and domain IDs")
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260402192608.1458252-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
