Pull RCU selftest fixes from Boqun Feng:
"Fix a regression in RCU torture test pre-defined scenarios caused by
commit 7dadeaa6e8 ("sched: Further restrict the preemption modes")
which limits PREEMPT_NONE to architectures that do not support
preemption at all and PREEMPT_VOLUNTARY to those architectures that do
not yet have PREEMPT_LAZY support.
Since major architectures (e.g. x86 and arm64) no longer support
CONFIG_PREEMPT_NONE and CONFIG_PREEMPT_VOLUNTARY, using them in
rcutorture, rcuscale, refscale, and scftorture pre-defined scenarios
causes config checking errors.
Switch these kconfigs to PREEMPT_LAZY"
* tag 'rcu-fixes.v7.0-20260307a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
scftorture: Update due to x86 not supporting none/voluntary preemption
refscale: Update due to x86 not supporting none/voluntary preemption
rcuscale: Update due to x86 not supporting none/voluntary preemption
rcutorture: Update due to x86 not supporting none/voluntary preemption
Add a test for the scenario described in the previous commit:
an iterator loop with two paths where one ties r2/r7 via
shared scalar id and skips a call, while the other goes
through the call. Precision marks from the linked registers
get spuriously propagated to the call path via
propagate_precision(), hitting "backtracking call unexpected
regs" in backtrack_insn().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-2-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Fixes: 0fb3cf6110 ("bpf: use register liveness information for func_states_equal")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull arm64 fixes from Will Deacon:
"The main changes are a fix to the way in which we manage the access
flag setting for mappings using the contiguous bit and a fix for a
hang on the kexec/hibernation path.
Summary:
- Fix kexec/hibernation hang due to bogus read-only mappings
- Fix sparse warnings in our cmpxchg() implementation
- Prevent runtime-const being used in modules, just like x86
- Fix broken elision of access flag modifications for contiguous
entries on systems without support for hardware updates
- Fix a broken SVE selftest that was testing the wrong instruction"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
selftest/arm64: Fix sve2p1_sigill() to hwcap test
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
arm64: make runtime const not usable by modules
arm64: mm: Add PTE_DIRTY back to PAGE_KERNEL* to fix kexec/hibernation
arm64: Silence sparse warnings caused by the type casting in (cmp)xchg
The pmtu.sh kselftest configures OVS using ovs-dpctl.py and falls back
to ovs-vsctl only when ovs-dpctl.py fails. However, ovs-dpctl.py exits
with a success status when the installed pyroute2 package version is
lower than 0.6, even though the OVS datapath is not configured.
As a result, pmtu.sh assumes that the setup was successful and
continues running the test, which later fails due to the missing
OVS configuration.
Fix the exit code handling in ovs-dpctl.py so that pmtu.sh can detect
that the setup did not complete successfully and fall back to
ovs-vsctl.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260306000127.519064-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two test cases for signed/unsigned 32-bit bounds refinement
when s32 range crosses the sign boundary:
- s32 range [S32_MIN..1] overlapping with u32 range [3..U32_MAX],
s32 range tail before sign boundary overlaps with u32 range.
- s32 range [-3..5] overlapping with u32 range [0..S32_MIN+3],
s32 range head after the sign boundary overlaps with u32 range.
This covers both branches added in the __reg32_deduce_bounds().
Also, crossing_32_bit_signed_boundary_2() no longer triggers invariant
violations.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-2-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges
in __reg32_deduce_bounds() in the following situations:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s32 range xxxxxxxxx] [xxxxxxx|
0 S32_MAX S32_MIN -1
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxxxxxx] [xxxxxxxxxxxx s32 range |
0 S32_MAX S32_MIN -1
- No refinement if ranges overlap in two intervals.
This helps for e.g. consider the following program:
call %[bpf_get_prandom_u32];
w0 &= 0xffffffff;
if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX]
if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1]
if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1]
r10 = 0;
1: ...;
The reg_bounds.c selftest is updated to incorporate identical logic,
refinement based on non-overflowing range halves:
((x ∩ [0, smax]) ∩ (y ∩ [0, smax])) ∪
((x ∩ [smin,-1]) ∩ (y ∩ [smin,-1]))
Reported-by: Andrea Righi <arighi@nvidia.com>
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/aakqucg4vcujVwif@gpd4/T/
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-1-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Several forwarding tests (e.g., gre_multipath.sh) initialize both IPv4
and IPv6 addresses using simple_if_init, but only clean up IPv4
in simple_if_fini. This leaves stale IPv6 addresses on the interfaces,
which causes subsequent tests to fail when they encounter unexpected
address configuration.
The issue can be reproduced by running tests in sequence:
# run_kselftest.sh -t net/forwarding:ipip_hier_gre.sh
# run_kselftest.sh -t net/forwarding:min_max_mtu.sh
TAP version 13
1..1
# timeout set to 0
# selftests: net/forwarding: min_max_mtu.sh
# TEST: ping [ OK ]
# TEST: ping6 [ OK ]
# TEST: Test maximum MTU configuration [ OK ]
# TEST: Test traffic, packet size is maximum MTU [FAIL]
# Ping6, packet size: 65487 succeeded, but should have failed
# TEST: Test minimum MTU configuration [ OK ]
# TEST: Test traffic, packet size is minimum MTU [ OK ]
not ok 1 selftests: net/forwarding: min_max_mtu.sh # exit=1
Fix this by removing the unused IPv6 argument from simple_if_init in
tests that don't use IPv6 (gre_multipath.sh, ipip_lib.sh), and by
adding the missing IPv6 argument to simple_if_fini in tests that
use IPv6 (gre_multipath_nh.sh, gre_multipath_nh_res.sh).
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260305211000.515301-1-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The large chunks test does a probe run of iou-zcrx before it runs the
actual test. After the probe run finishes, the context will still exist
until the deferred io_uring teardown. When running iou-zcrx the second
time, io_uring_register_ifq() can return -EEXIST due to the existence of
the old context.
The fix is simple: wait for the context teardown using the new
mp_clear_wait() utility before running the second instance of iou-zcrx.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260305080446.897628-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260305181803.2912736-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kunit fixes from Shuah Khan:
- Fix rust warnings when CONFIG_PRINTK is disabled
- Reduce stack usage in kunit_run_tests() to fix warnings when
CONFIG_FRAME_WARN is set to a relatively low value
- Update email address for David Gow
- Copy caller args in kunit tool in run_kernel to prevent mutation
* tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: reduce stack usage in kunit_run_tests()
kunit: tool: copy caller args in run_kernel to prevent mutation
rust: kunit: fix warning when !CONFIG_PRINTK
MAINTAINERS: Update email address for David Gow
Pull HID fixes from Benjamin Tissoires:
- fix a few memory leaks (Günther Noack)
- fix potential kernel crashes in cmedia, creative-sb0540 and zydacron
(Greg Kroah-Hartman)
- fix NULL pointer dereference in pidff (Tomasz Pakuła)
- fix battery reporting for Apple Magic Trackpad 2 (Julius Lehmann)
- mcp2221 proper handling of failed read operation (Romain Sioen)
- various device quirks / device ID additions
* tag 'hid-for-linus-2026030601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp2221: cancel last I2C command on read error
HID: asus: add xg mobile 2023 external hardware support
HID: multitouch: Keep latency normal on deactivate for reactivation gesture
HID: apple: Add EPOMAKER TH87 to the non-apple keyboards list
HID: intel-ish-hid: ipc: Add Nova Lake-H/S PCI device IDs
selftests: hid: tests: test_wacom_generic: add tests for display devices and opaque devices
HID: multitouch: new class MT_CLS_EGALAX_P80H84
HID: magicmouse: fix battery reporting for Apple Magic Trackpad 2
HID: pidff: Fix condition effect bit clearing
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
HID: asus: avoid memory leak in asus_report_fixup()
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
HID: apple: avoid memory leak in apple_report_fixup()
HID: Document memory allocation properties of report_fixup()
The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However,
the BFADD requires the FEAT_SVE_B16B16, which is indicated by
ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly
fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16.
LD1Q Gather load quadwords which is decoded from SVE encodings and
implied by FEAT_SVE2p1.
Fixes: c5195b027d ("kselftest/arm64: Add SVE 2.1 to hwcap test")
Signed-off-by: Yifan Wu <wuyifan50@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Extend existing kprobe_multi_test subtests to validate the
kprobe.session exact function name optimization:
In kprobe_multi_session.c, add test_kprobe_syms which attaches a
kprobe.session program to an exact function name (bpf_fentry_test1)
exercising the fast syms[] path that bypasses kallsyms parsing. It
calls session_check() so bpf_fentry_test1 is hit by both the wildcard
and exact probes, and test_session_skel_api validates
kprobe_session_result[0] == 4 (entry + return from each probe).
In test_attach_api_fails, add fail_7 and fail_8 verifying error code
consistency between the wildcard pattern path (slow, parses kallsyms)
and the exact function name path (fast, uses syms[] array). Both
paths must return -ENOENT for non-existent functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260302200837.317907-4-andrey.grodzovsky@crowdstrike.com
The perf_event subtest relies on SW_CPU_CLOCK sampling to trigger the BPF
program, but the current CPU burn loop can be too short on slower systems
and may fail to generate any overflow sample. This leaves pe_res unchanged
and makes the test flaky.
Make burn_cpu() take a loop count and use a longer burn only for the
perf_event subtest. Also scope perf_event_open() to the current task to
avoid wasting samples on unrelated activity.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260228074555.122950-3-sun.jian.kdev@gmail.com
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such scftorture scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-4-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such refscale scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-3-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcuscale scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-2-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcutorture scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/bfe89f6c-3b63-40c6-aa6d-5f523e3e9a31@paulmck-laptop
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Add a regression test for a kernel panic that occurs when an IPv4 route
references an IPv6 nexthop object created on the loopback device.
The test creates an IPv6 nexthop on lo, binds an IPv4 route to it, then
triggers a route lookup via ping to verify the kernel does not crash.
./fib_nexthops.sh
Tests passed: 249
Tests failed: 0
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tun UDP tunnel GSO fixture contains XFAIL-marked variants intended to
exercise failure paths (e.g. EMSGSIZE / "Message too long").
Using ASSERT_EQ() in these tests aborts the subtest, which prevents the
harness from classifying them as XFAIL and can make the overall net: tun
test fail.
Switch the relevant ASSERT_EQ() checks to EXPECT_EQ() so the subtests
continue running and the failures are correctly reported and accounted
as XFAIL where applicable.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TEST_F() allocates and registers its struct __test_metadata via mmap()
inside its constructor, and only then assigns the
_##fixture_##test##_object pointer.
XFAIL_ADD() runs in a constructor too and reads
_##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs
first, xfail->test can be NULL and the expected failure will be reported
as FAIL.
Use constructor priorities to ensure TEST_F registration runs before
XFAIL_ADD, without adding extra state or runtime lookups.
Fixes: 2709473c93 ("selftests: kselftest_harness: support using xfail")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: endpoints with both the signal and
subflow flags should always be marked as used even if it was not
possible to create new subflows due to the MPTCP PM limits.
For this test, an extra endpoint is created with both the signal and the
subflow flags, and limits are set not to create extra subflows. In this
case, an ADD_ADDR is sent, but no subflows are created. Still, the local
endpoint is marked as used, and no warning is fired when removing the
endpoint, after having sent a RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 85df533a78 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: RM_ADDR were sent over the first
found active subflow which could be the same as the one being removed.
It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them
over the initial subflow, when removing the endpoint attached to it. If
it is dropped, the test will complain because some RM_ADDR have not been
received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to
be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte
code is used. If the IPTables commands fail, that's OK, the tests will
continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as
skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 8dd5efb1f9 ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'virt' is confusing in the VMCB because it is relative and ambiguous.
The 'virt_ext' field includes bits for LBR virtualization and
VMSAVE/VMLOAD virtualization, so it's just another miscellaneous control
field. Name it as such.
While at it, move the definitions of the bits below those for
'misc_ctl' and rename them for consistency.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260303003421.2185681-20-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The 'nested_ctl' field is misnamed. Although the first bit is for nested
paging, the other defined bits are for SEV/SEV-ES. Other bits in the
same field according to the APM (but not defined by KVM) include "Guest
Mode Execution Trap", "Enable INVLPGB/TLBSYNC", and other control bits
unrelated to 'nested'.
There is nothing common among these bits, so just name the field
misc_ctl. Also rename the flags accordingly.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260303003421.2185681-19-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
guest_memfd only supports PAGE_SIZE pages, and khugepaged or MADV_COLLAPSE
collapsing pages may result in private memory regions being mapped into
host page tables.
Add test to verify that MADV_COLLAPSE fails on guest_memfd folios, and any
subsequent usage of guest_memfd memory faults in PAGE_SIZE folios. Running
this test should not result in any memory failure logs or kernel WARNings.
This selftest was added as a result of a syzbot-reported issue where
khugepaged operating on guest_memfd memory with MADV_HUGEPAGE caused the
collapse of folios, which then subsequently resulted in a WARNing.
Link: https://syzkaller.appspot.com/bug?extid=33a04338019ac7e43a44
Suggested-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Link: https://patch.msgid.link/8048d04f150326d1e2231318aa9f1b3fce3e2e2c.1771630983.git.ackerleytng@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use %ld (not %lu) for signed long, and pass the actual string length
returned by sprintf() to write_text() instead of sizeof(buf).
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
