The bounds check for brace_index happens after the array write.
While the current call pattern prevents an actual out-of-bounds
access (the previous call would have returned an error), the
write-before-check pattern is fragile and would become a real
out-of-bounds write if the error return were ever not propagated.
Move the bounds check before the array write so the function is
self-contained and safe regardless of caller behavior.
Link: https://lore.kernel.org/all/20260312191143.28719-3-objecting@objecting.org/
Fixes: ead1e19ad9 ("lib/bootconfig: Fix a bug of breaking existing tree nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
__xbc_open_brace() pushes entries with post-increment
(open_brace[brace_index++]), so brace_index always points one past
the last valid entry. xbc_verify_tree() reads open_brace[brace_index]
to report which brace is unclosed, but this is one past the last
pushed entry and contains stale/zero data, causing the error message
to reference the wrong node.
Use open_brace[brace_index - 1] to correctly identify the unclosed
brace. brace_index is known to be > 0 here since we are inside the
if (brace_index) guard.
Link: https://lore.kernel.org/all/20260312191143.28719-2-objecting@objecting.org/
Fixes: ead1e19ad9 ("lib/bootconfig: Fix a bug of breaking existing tree nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Currently there are three different open-coded variants of a time
namespace aware variant of vdso_read_begin(). They make the code hard to
read and introduce an inconsistency, as only the first copy uses
unlikely().
Split the code into a shared helper function.
Move that next to the definition of the regular vdso_read_begin(), so
that any future changes can be kept in sync easily.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260227-vdso-cleanups-v1-2-c848b4bc4850@linutronix.de
Allocating the data pages as part of the kernel image does not work on
SPARC. The MMU will raise a fault when userspace tries to access them.
Allocate the data pages through the page allocator instead.
Unused pages in the vDSO VMA are still allocated to keep the virtual
addresses aligned. Switch the mapping from PFNs to 'struct page' as that is
required for dynamically allocated pages. This also aligns the allocation
of the datapages with the code pages and is a prerequisite for mlockall()
support.
VM_MIXEDMAP is necessary for the call to vmf_insert_page() in the timens
prefault path to work.
The data pages need to be order-0, non-compound pages so that the mapping
to userspace and the different orderings work.
These pages are also used by the timekeeping, random pool and architecture
initialization code. Some of these are running before the page allocator is
available. To keep these subsytems working without changes, introduce
early, statically data storage which will then replaced by the real one as
soon as that is available.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/20260304-vdso-sparc64-generic-2-v6-3-d8eb3b0e1410@linutronix.de
Add a .kunitconfig file to the lib/crc/ directory so that the CRC
library tests can be run more easily using kunit.py. Example with UML:
tools/testing/kunit/kunit.py run --kunitconfig=lib/crc
Example with QEMU:
tools/testing/kunit/kunit.py run --kunitconfig=lib/crc --arch=arm64 --make_options LLVM=1
Link: https://lore.kernel.org/r/20260306033557.250499-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that crc_kunit uses the standard "depends on" pattern, enabling the
full set of CRC tests is a bit difficult, mainly due to CRC7 being
rarely used. Add a kconfig option to make it easier. It is visible
only when KUNIT, so hopefully the extra prompt won't be too annoying.
Link: https://lore.kernel.org/r/20260306033557.250499-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Like commit 4478e8eeb8 ("lib/crypto: tests: Depend on library options
rather than selecting them") did with the crypto library tests, make
crc_kunit depend on the code it tests rather than selecting it. This
follows the standard convention for KUnit and fixes an issue where
enabling KUNIT_ALL_TESTS enabled non-test code.
crc_kunit does differ from the crypto library tests in that it
consolidates the tests for multiple CRC variants, with 5 kconfig
options, into one KUnit suite. Since depending on *all* of these
kconfig options would greatly restrict the ability to enable crc_kunit,
instead just depend on *any* of these options. Update crc_kunit
accordingly to test only the reachable code.
Alternatively we could split crc_kunit into 5 test suites. But keeping
it as one is simpler for now.
Fixes: e47d9b1a76 ("lib/crc_kunit.c: add KUnit test suite for CRC library functions")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260306033557.250499-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a FIPS cryptographic algorithm self-test for AES-CMAC to fulfill the
self-test requirement when this code is built into a FIPS 140
cryptographic module. This provides parity with the traditional crypto
API, which uses crypto/testmgr.c to meet the FIPS self-test requirement.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260218213501.136844-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized CMAC, XCBC-MAC, and CBC-MAC code
via arm64-specific crypto_shash algorithms, instead just implement the
aes_cbcmac_blocks_arch() library function. This is much simpler, it
makes the corresponding library functions be arm64-optimized, and it
fixes the longstanding issue where this optimized code was disabled by
default. The corresponding algorithms still remain available through
crypto_shash, but individual architectures no longer need to handle it.
Note that to be compatible with the library using 'size_t' lengths, the
type of the return value and 'blocks' parameter to the assembly
functions had to be changed to 'size_t', and the assembly code had to be
updated accordingly to use the corresponding 64-bit registers.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260218213501.136844-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
To migrate the support for CBC-based MACs into libaes, the corresponding
arm64 assembly code needs to be moved there. However, the arm64 AES
assembly code groups many AES modes together; individual modes aren't
easily separable. (This isn't unique to arm64; other architectures
organize their AES modes similarly.)
Since the other AES modes will be migrated into the library eventually
too, just move the full assembly files for the AES modes into the
library. (This is similar to what I already did for PowerPC and SPARC.)
Specifically: move the assembly files aes-ce.S, aes-modes.S, and
aes-neon.S and their build rules; declare the assembly functions in
<crypto/aes.h>; and export the assembly functions from libaes.
Note that the exports and public declarations of the assembly functions
are temporary. They exist only to keep arch/arm64/crypto/ working until
the AES modes are fully moved into the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260218213501.136844-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for CBC-based MACs to the AES library, specifically
AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC.
Of these three algorithms, AES-CMAC is the most modern and the most
commonly used. Use cases for the AES-CMAC library include the kernel's
SMB client and server, and the bluetooth and mac80211 drivers.
Support for AES-XCBC-MAC and AES-CBC-MAC is included so that there will
be no performance regression in the "xcbc(aes)" and "ccm(aes)" support
in the traditional crypto API once the arm64-optimized code is migrated
into the library. AES-XCBC-MAC is given its own key preparation
function but is otherwise identical to AES-CMAC and just reuses the
AES-CMAC structs and functions.
The implementation automatically uses the optimized AES key expansion
and single block en/decryption functions. It also allows architectures
to provide an optimized implementation of aes_cbcmac_blocks(), which
allows the existing arm64-optimized code for these modes to be used.
Just put the code for these modes directly in the libaes module rather
than in a separate module. This is simpler, it makes it easier to share
code between AES modes, and it increases the amount of inlining that is
possible. (Indeed, for these reasons, most of the
architecture-optimized AES code already provides multiple modes per
module. x86 for example has only a single aesni-intel module. So to a
large extent, this design choice just reflects the status quo.)
However, since there are a lot of AES modes, there's still some value in
omitting modes that are not needed at all in a given kernel. Therefore,
make these modes an optional feature of libaes, controlled by
CONFIG_CRYPTO_LIB_AES_CBC_MACS. This seems like a good middle ground.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260218213501.136844-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Define access macros for font_data_t in fonts.c. Define struct font_data
and declare most of the font symbols in the internal header font.h, where
they can only be seen by the font code.
Also move font indices into internal font.h. They appear to be unused
though. There is m86k assembly code that operates on the idx field, so
leave them in place for now.
List all built-in fonts in a separate section in the public header file.
v2:
- do not add config guards around font symbols (Helge)
- keep declaration of built-in fonts in public header
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_export() and update consoles to use it.
The helper font_data_export() is based on code in fbcon_get_font().
It extends the size of a single glyph to match the requested vpitch,
which us usually 32 bytes for fonts from user space. Internal fonts
have a pitch according to the glyph's height.
The implementation of font_data_export() differs in several ways from
the original code. The original implementation distinguished between
different pitches of the font data. This is not necessary as the pitch
is a parameter in the copying.
There was also special handling for a font pitch of 3 bytes, which got
expanded to 4 bytes (with trailing bits on each scanline). The logic
originated from long before git history exists even in the historical
tree. So it is not clear why this was implemented. It is not what user
space expects. The setfont utitlity loads font with 3-bytes pitches and
expects to read such fonts with a 3-byte pitch. For any font width, the
font pitch is always the width extended to the next multiple of 8. See
[1] for the user-space font-reading code.
With the changes to handling the font pitches, font_data_export() replaces
the original code's various special cases with a single copying logic.
v3:
- fix typos (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://github.com/legionus/kbd/blob/v2.9.0/src/libkfont/kdfontop.c#L73 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_import() and update consoles to use it.
The implementation of font_data_import() is based on code from fbcon,
which supports overflow checks and crc32 checksums. Fbcon uses the crc32
checksum.
Newport_con now implements the same overflow checks as fbcon. As before,
this console does not support checksums, which are optional. Newport_con
can now also handle input font data with a vertical pitch other than 32
bytes. (The vertical pitch is the offset between two glyphs in the font
data.)
As an internal change, remove the const qualifier from the data field
if struct font_data. This allows font_data_import() to write the data
without type casting. For all users of the font data via font_data_t,
the stored data is still read only.
v3:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_is_equal() and update consoles to use it.
Font data is equal if it has the same size and contains the same values
on all bytes. Only fbcon uses a crc32 checksum. If set in both operands
the checksums have to be equal.
The new helper also guarantees to not compare internal fonts against
fonts from user space. Internal fonts cannot be ref-counted, so making
them equal to user-space fonts with the same byte sequence results in
undefined behavior.
The test only compares data buffers. Their interpretation is up each
console. Therefore remove a width test in fbcon_set_font().
v3:
- rebase onto font_data_{get,put}()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_get() and font_data_put(). Update consoles to use them
over REFCOUNT() and plain kfree().
Newly allocated font data starts with a reference count of 1. Loading
the font puts the previously loaded font. If the reference count reaches
zero, font_data_put() frees the font data.
The kernel stores a refcount of zero for internal font data. Invoking
font_data_get() and font_data_put() tests this internally and returns
success without further operation. From the caller's perspective,
getting and putting works the same for all font data.
Fbcon used the userfont flag distinguish between internal fonts and
fonts loaded by user space. Only the latter where refcounted. With the
new helper's automatic handling of internal font data, remove the
userfont flag from fbcon.
Newport_con uses a default font, FONT_DATA, until user space loads
custom font data. Remove all special cases for FONT_DATA, as the get
and put calls' read-only handling also covers this case.
v3:
- fix module linker error wrt font symbols (Nathan, Arnd)
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull kunit fixes from Shuah Khan:
- Fix rust warnings when CONFIG_PRINTK is disabled
- Reduce stack usage in kunit_run_tests() to fix warnings when
CONFIG_FRAME_WARN is set to a relatively low value
- Update email address for David Gow
- Copy caller args in kunit tool in run_kernel to prevent mutation
* tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: reduce stack usage in kunit_run_tests()
kunit: tool: copy caller args in run_kernel to prevent mutation
rust: kunit: fix warning when !CONFIG_PRINTK
MAINTAINERS: Update email address for David Gow
Fix various coding style issues across the audit subsystem flagged
by checkpatch.pl script to adhere to kernel coding standards.
Specific changes include:
- kernel/auditfilter.c: Move the open brace '{' to the previous line
for the audit_ops array declaration.
- lib/audit.c: Add a required space before the open parenthesis '('.
- include/uapi/linux/audit.h: Enclose the complex macro value for
AUDIT_UID_UNSET in parentheses.
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull crypto library fixes from Eric Biggers:
- Several test fixes:
- Fix flakiness in the interrupt context tests in certain VMs
- Make the lib/crypto/ KUnit tests depend on the corresponding
library options rather than selecting them. This follows the
standard KUnit convention, and it fixes an issue where enabling
CONFIG_KUNIT_ALL_TESTS pulled in all the crypto library code
- Add a kunitconfig file for lib/crypto/
- Fix a couple stale references to "aes-generic" that made it in
concurrently with the rename to "aes-lib"
- Update the help text for several CRYPTO kconfig options to remove
outdated information about users that now use the library instead
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: testmgr - Fix stale references to aes-generic
crypto: Clean up help text for CRYPTO_CRC32
crypto: Clean up help text for CRYPTO_CRC32C
crypto: Clean up help text for CRYPTO_XXHASH
crypto: Clean up help text for CRYPTO_SHA256
crypto: Clean up help text for CRYPTO_BLAKE2B
lib/crypto: tests: Add a .kunitconfig file
lib/crypto: tests: Depend on library options rather than selecting them
kunit: irq: Ensure timer doesn't fire too frequently
Add a .kunitconfig file to the lib/crypto/ directory so that the crypto
library tests can be run more easily using kunit.py. Example with UML:
tools/testing/kunit/kunit.py run --kunitconfig=lib/crypto
Example with QEMU:
tools/testing/kunit/kunit.py run --kunitconfig=lib/crypto --arch=arm64 --make_options LLVM=1
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260301040140.490310-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Some of the recent changes to the kunit framework caused the stack usage
for kunit_run_tests() to grow higher than most other kernel functions,
which triggers a warning when CONFIG_FRAME_WARN is set to a relatively
low value:
lib/kunit/test.c: In function 'kunit_run_tests':
lib/kunit/test.c:801:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Split out the inner loop into a separate function to ensure that each
function remains under the limit, and pass the kunit_result_stats
structures by reference to avoid excessive copies.
Fixed checkpatch warnings at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Cc: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects.
The deferred page initialization prevents debug objects from
allocating slab pages until the initialization is complete. That
causes depletion of the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it
might be invoked from arbitrary contexts. When PREEMPT_COUNT is
disabled there is no way to know whether the context is safe to set
__GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag
cause new_slab() to end up in alloc_frozen_pages_nolock_noprof(),
which returns early when deferred page initialization has not yet
completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when
the context is preemtible. When PREEMPT_COUNT is disabled the context
is unknown and the reclaim bit can't be set because the caller might
hold locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT ||
!DEFERRED_STRUCT_PAGE_INIT, which limits the coverage slightly, but
keeps it functional for most cases"
* tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Make it work with deferred page initialization - again
Pull locking fix from Ingo Molnar:
"Now that LLVM 22 has been released officially, require a release
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.
In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase"
* tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/Kconfig.debug: Require a release version of LLVM 22 for context analysis
The convention for KUnit tests is to have the test kconfig options
visible only when the code they depend on is already enabled. This way
only the tests that are relevant to the particular kernel build can be
enabled, either manually or via KUNIT_ALL_TESTS.
Update lib/crypto/tests/Kconfig to follow that convention, i.e. depend
on the corresponding library options rather than selecting them. This
fixes an issue where enabling KUNIT_ALL_TESTS enabled non-test code.
This does mean that it becomes a bit more difficult to enable *all* the
crypto library tests (which is what I do as a maintainer of the code),
since doing so will now require enabling other options that select the
libraries. Regardless, we should follow the standard KUnit convention.
I'll also add a .kunitconfig file that does enable all these options.
Note: currently most of the crypto library options are selected by
visible options in crypto/Kconfig, which can be used to enable them
without too much trouble. If in the future we end up with more cases
like CRYPTO_LIB_CURVE25519 which is selected only by WIREGUARD (thus
making CRYPTO_LIB_CURVE25519_KUNIT_TEST effectively depend on WIREGUARD
after this commit), we could consider adding a new kconfig option that
enables all the library code specifically for testing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdULzMdxuTVfg8_4jdgzbzjfx-PHkcgbGSthcUx_sHRNMg@mail.gmail.com
Fixes: 4dcf6cadda ("lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256")
Fixes: 571eaeddb6 ("lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512")
Fixes: 6dd4d9f791 ("lib/crypto: tests: Add KUnit tests for Poly1305")
Fixes: 66b1306079 ("lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1")
Fixes: d6b6aac0cd ("lib/crypto: tests: Add KUnit tests for MD5 and HMAC-MD5")
Fixes: afc4e4a5f1 ("lib/crypto: tests: Migrate Curve25519 self-test to KUnit")
Fixes: 6401fd334d ("lib/crypto: tests: Add KUnit tests for BLAKE2b")
Fixes: 15c64c47e4 ("lib/crypto: tests: Add SHA3 kunit tests")
Fixes: b3aed551b3 ("lib/crypto: tests: Add KUnit tests for POLYVAL")
Fixes: ed894faccb ("lib/crypto: tests: Add KUnit tests for ML-DSA verification")
Fixes: 7246fe6cd6 ("lib/crypto: tests: Add KUnit tests for NH")
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260226191749.39397-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The hrtimer subsystem wants to peak ahead to the next and previous timer to
evaluated whether a to be rearmed timer can stay at the same position in
the RB tree with the new expiry time.
The linked RB tree provides the infrastructure for this as it maintains
links to the previous and next nodes for each entry in the tree.
Provide timerqueue wrappers around that.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260224163431.734827095@kernel.org
Some RB tree users require quick access to the next and the previous node,
e.g. to check whether a modification of the node results in a change of the
nodes position in the tree. If the node position does not change, then the
modification can happen in place without going through a full enqueue
requeue cycle. A upcoming use case for this are the timer queues of the
hrtimer subsystem as they can optimize for timers which are frequently
rearmed while enqueued.
This can be obviously achieved with rb_next() and rb_prev(), but those
turned out to be quite expensive for hotpath operations depending on the
tree depth.
Add a linked RB tree variant where add() and erase() maintain the links
between the nodes. Like the cached variant it provides a pointer to the
left most node in the root.
It intentionally does not use a [h]list head as there is no real need for
true list operations as the list is strictly coupled to the tree and
and cannot be manipulated independently.
It sets the nodes previous pointer to NULL for the left most node and the
next pointer to NULL for the right most node. This allows a quick check
especially for the left most node without consulting the list head address,
which creates better code.
Aside of the rb_leftmost cached pointer this could trivially provide a
rb_rightmost pointer as well, but there is no usage for that (yet).
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260224163431.668401024@kernel.org
Using a prerelease version as a minimum supported version for
CONFIG_WARN_CONTEXT_ANALYSIS was reasonable to do while LLVM 22 was the
development version so that people could immediately build from main and
start testing and validating this in their own code. However, it can be
problematic when using prerelease versions of LLVM 22, such as Android
clang 22.0.1 (the current android mainline compiler) or when bisecting
LLVM between llvmorg-22-init and llvmorg-23-init, to build the kernel,
as all compiler fixes for the context analysis may not be present,
potentially resulting in warnings that can easily turn into errors.
Now that LLVM 22 is released as 22.1.0, upgrade the check to require at
least this version to ensure that a user's toolchain actually has all
the changes needed for a smooth experience with context analysis.
Fixes: 3269701cb2 ("compiler-context-analysis: Add infrastructure for Context Analysis with Clang")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260224-bump-clang-ver-context-analysis-v1-1-16cc7a90a040@kernel.org
This config option goes way back - it used to be an internal debug
option to random.c (at that point called DEBUG_RANDOM_BOOT), then was
renamed and exposed as a config option as CONFIG_WARN_UNSEEDED_RANDOM,
and then further renamed to the current CONFIG_WARN_ALL_UNSEEDED_RANDOM.
It was all done with the best of intentions: the more limited
rate-limited reports were reporting some cases, but if you wanted to see
all the gory details, you'd enable this "ALL" option.
However, it turns out - perhaps not surprisingly - that when people
don't care about and fix the first rate-limited cases, they most
certainly don't care about any others either, and so warning about all
of them isn't actually helping anything.
And the non-ratelimited reporting causes problems, where well-meaning
people enable debug options, but the excessive flood of messages that
nobody cares about will hide actual real information when things go
wrong.
I just got a kernel bug report (which had nothing to do with randomness)
where two thirds of the the truncated dmesg was just variations of
random: get_random_u32 called from __get_random_u32_below+0x10/0x70 with crng_init=0
and in the process early boot messages had been lost (in addition to
making the messages that _hadn't_ been lost harder to read).
The proper way to find these things for the hypothetical developer that
cares - if such a person exists - is almost certainly with boot time
tracing. That gives you the option to get call graphs etc too, which is
likely a requirement for fixing any problems anyway.
See Documentation/trace/boottime-trace.rst for that option.
And if we for some reason do want to re-introduce actual printing of
these things, it will need to have some uniqueness filtering rather than
this "just print it all" model.
Fixes: cc1e127bfa ("random: remove ratelimiting for in-kernel unseeded randomness")
Acked-by: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs
Align to the commit bf4afc53b7 ("Convert 'alloc_obj' family to use the
new default GFP_KERNEL argument") update the 'kmalloc_obj' declaration
for userspace to fix below compile error:
In file included from arch/arm/boot/compressed/../../../../lib/decompress_unxz.c:241,
from arch/arm/boot/compressed/decompress.c:56:
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'xz_dec_init':
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c:787:28: error: implicit declaration of function 'kmalloc_obj'; did you mean 'kmalloc'? [-Wimplicit-function-declaration]
787 | struct xz_dec *s = kmalloc_obj(*s);
| ^~~~~~~~~~~
| kmalloc
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Fixes: bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
I finally got a big endian PPC64 kernel to boot in QEMU. The PPC64 VSX
optimized AES library code does work in that case, with the exception of
rndkey_from_vsx() which doesn't take into account that the order in
which the VSX code stores the round key words depends on the endianness.
So fix rndkey_from_vsx() to do the right thing on big endian CPUs.
Fixes: 7cf2082e74 ("lib/crypto: powerpc/aes: Migrate POWER8 optimized code into library")
Link: https://lore.kernel.org/r/20260216022104.332991-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull dmaengine updates from Vinod Koul:
"Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine
- Synopsis DW AXI Agilex5
- Renesas RZ/V2N SoC
- Atmel microchip lan9691-dma
- Tegra ADMA tegra264
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support"
* tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits)
dmaengine: add Frank Li as reviewer
dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
dmaengine: xilinx: xdma: use sg_nents_for_dma() helper
dmaengine: sh: use sg_nents_for_dma() helper
dmaengine: sa11x0: use sg_nents_for_dma() helper
dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper
dmaengine: qcom: adm: use sg_nents_for_dma() helper
dmaengine: pxa-dma: use sg_nents_for_dma() helper
dmaengine: lgm: use sg_nents_for_dma() helper
dmaengine: k3dma: use sg_nents_for_dma() helper
dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper
dmaengine: bcm2835-dma: use sg_nents_for_dma() helper
dmaengine: axi-dmac: use sg_nents_for_dma() helper
dmaengine: altera-msgdma: use sg_nents_for_dma() helper
scatterlist: introduce sg_nents_for_dma() helper
dmaengine: idxd: Add Max SGL Size Support for DSA3.0
dmaengine: idxd: Expose DSA3.0 capabilities through sysfs
dmaengine: sh: rz-dmac: Make channel irq local
dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081
...
Pull bootconfig updates from Masami Hiramatsu:
- Update the bootconfig parser to stop searching for a value when it
encounters a newline character
- Update the tests for bootconfig parser to ensure the good examples to
be parsed correctly by comparing the expected results
* tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Check the parsed output of the good examples
bootconfig: Terminate value search if it hits a newline
