When building with SCHED_CLASS_EXT=y but CGROUPS=n, clang reports errors
for undeclared cgroup_put() and cgroup_get() calls, and a warning for the
unused err_stop_helper label.
EXT_SUB_SCHED is def_bool y depending only on SCHED_CLASS_EXT, but it
fundamentally requires cgroups (cgroup_path, cgroup_get, cgroup_put,
cgroup_id, etc.). Add the missing CGROUPS dependency to EXT_SUB_SCHED in
init/Kconfig.
Guard cgroup_put() and cgroup_get() in the common paths with:
#if defined(CONFIG_EXT_GROUP_SCHED) || defined(CONFIG_EXT_SUB_SCHED)
Guard the err_stop_helper label with #ifdef CONFIG_EXT_SUB_SCHED since
all gotos targeting it are inside that same ifdef block.
Tested with both CGROUPS enabled and disabled.
Fixes: ebeca1f930 ("sched_ext: Introduce cgroup sub-sched support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603210903.IrKhPd6k-lkp@intel.com/
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix how linked registers track zero extension of subregisters (Daniel
Borkmann)
- Fix unsound scalar fork for OR instructions (Daniel Wade)
- Fix exception exit lock check for subprogs (Ihor Solodrai)
- Fix undefined behavior in interpreter for SDIV/SMOD instructions
(Jenny Guanni Qu)
- Release module's BTF when module is unloaded (Kumar Kartikeya
Dwivedi)
- Fix constant blinding for PROBE_MEM32 instructions (Sachin Kumar)
- Reset register ID for END instructions to prevent incorrect value
tracking (Yazhou Tang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a test cases for sync_linked_regs regarding zext propagation
bpf: Fix sync_linked_regs regarding BPF_ADD_CONST32 zext propagation
selftests/bpf: Add tests for maybe_fork_scalars() OR vs AND handling
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
selftests/bpf: Add tests for sdiv32/smod32 with INT_MIN dividend
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
selftests/bpf: Add tests for bpf_throw lock leak from subprogs
bpf: Fix exception exit lock checking for subprogs
bpf: Release module BTF IDR before module unload
selftests/bpf: Fix pkg-config call on static builds
bpf: Fix constant blinding for PROBE_MEM32 stores
selftests/bpf: Add test for BPF_END register ID reset
bpf: Reset register ID for BPF_END value tracking
Pull tracing fixes from Steven Rostedt:
- Revert "tracing: Remove pid in task_rename tracing output"
A change was made to remove the pid field from the task_rename event
because it was thought that it was always done for the current task
and recording the pid would be redundant. This turned out to be
incorrect and there are a few corner case where this is not true and
caused some regressions in tooling.
- Fix the reading from user space for migration
The reading of user space uses a seq lock type of logic where it uses
a per-cpu temporary buffer and disables migration, then enables
preemption, does the copy from user space, disables preemption,
enables migration and checks if there was any schedule switches while
preemption was enabled. If there was a context switch, then it is
considered that the per-cpu buffer could be corrupted and it tries
again. There's a protection check that tests if it takes a hundred
tries, it issues a warning and exits out to prevent a live lock.
This was triggered because the task was selected by the load balancer
to be migrated to another CPU, every time preemption is enabled the
migration task would schedule in try to migrate the task but can't
because migration is disabled and let it run again. This caused the
scheduler to schedule out the task every time it enabled preemption
and made the loop never exit (until the 100 iteration test
triggered).
Fix this by enabling and disabling preemption and keeping migration
enabled if the reading from user space needs to be done again. This
will let the migration thread migrate the task and the copy from user
space will likely pass on the next iteration.
- Fix trace_marker copy option freeing
The "copy_trace_marker" option allows a tracing instance to get a
copy of a write to the trace_marker file of the top level instance.
This is managed by a link list protected by RCU. When an instance is
removed, a check is made if the option is set, and if so
synchronized_rcu() is called.
The problem is that an iteration is made to reset all the flags to
what they were when the instance was created (to perform clean ups)
was done before the check of the copy_trace_marker option and that
option was cleared, so the synchronize_rcu() was never called.
Move the clearing of all the flags after the check of
copy_trace_marker to do synchronize_rcu() so that the option is still
set if it was before and the synchronization is performed.
- Fix entries setting when validating the persistent ring buffer
When validating the persistent ring buffer on boot up, the number of
events per sub-buffer is added to the sub-buffer meta page. The
validator was updating cpu_buffer->head_page (the first sub-buffer of
the per-cpu buffer) and not the "head_page" variable that was
iterating the sub-buffers. This was causing the first sub-buffer to
be assigned the entries for each sub-buffer and not the sub-buffer
that was supposed to be updated.
- Use "hash" value to update the direct callers
When updating the ftrace direct callers, it assigned a temporary
callback to all the callback functions of the ftrace ops and not just
the functions represented by the passed in hash. This causes an
unnecessary slow down of the functions of the ftrace_ops that is not
being modified. Only update the functions that are going to be
modified to call the ftrace loop function so that the update can be
made on those functions.
* tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use hash argument for tmp_ops in update_ftrace_direct_mod
ring-buffer: Fix to update per-subbuf entries of persistent ring buffer
tracing: Fix trace_marker copy link list updates
tracing: Fix failure to read user space from system call trace events
tracing: Revert "tracing: Remove pid in task_rename tracing output"
Pull perf fixes from Ingo Molnar:
- Fix a PMU driver crash on AMD EPYC systems, caused by
a race condition in x86_pmu_enable()
- Fix a possible counter-initialization bug in x86_pmu_enable()
- Fix a counter inheritance bug in inherit_event() and
__perf_event_read()
- Fix an Intel PMU driver branch constraints handling bug
found by UBSAN
- Fix the Intel PMU driver's new Off-Module Response (OMR)
support code for Diamond Rapids / Nova lake, to fix a snoop
information parsing bug
* tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix OMR snoop information parsing issues
perf/x86/intel: Add missing branch counters constraint apply
perf: Make sure to use pmu_ctx->pmu for groups
x86/perf: Make sure to program the counter value for stopped events on migration
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
On weakly ordered architectures (e.g., arm64), the lockless check in
wq_watchdog_timer_fn() can observe a reordering between the worklist
insertion and the last_progress_ts update. Specifically, the watchdog
can see a non-empty worklist (from a list_add) while reading a stale
last_progress_ts value, causing a false positive stall report.
This was confirmed by reading pool->last_progress_ts again after holding
pool->lock in wq_watchdog_timer_fn():
workqueue watchdog: pool 7 false positive detected!
lockless_ts=4784580465 locked_ts=4785033728
diff=453263ms worklist_empty=0
To avoid slowing down the hot path (queue_work, etc.), recheck
last_progress_ts with pool->lock held. This will eliminate the false
positive with minimal overhead.
Remove two extra empty lines in wq_watchdog_timer_fn() as we are on it.
Fixes: 82607adcf9 ("workqueue: implement lockup detector")
Cc: stable@vger.kernel.org # v4.5+
Assisted-by: claude-code:claude-opus-4-6
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible.
Fixes: 894c9ef978 ("padata: validate cpumask without removed CPU during offline")
Reported-by: syzbot+123e1b70473ce213f3af@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69af0a05.050a0220.310d8.002f.GAE@google.com/
Debugged-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the WAKE_SYNC path of scx_select_cpu_dfl(), waker_node was computed
with cpu_to_node(), while node (for prev_cpu) was computed with
scx_cpu_node_if_enabled(). When scx_builtin_idle_per_node is disabled,
idle_cpumask(waker_node) is called with a real node ID even though
per-node idle tracking is disabled, resulting in undefined behavior.
Fix by using scx_cpu_node_if_enabled() for waker_node as well, ensuring
both variables are computed consistently.
Fixes: 48849271e6 ("sched_ext: idle: Per-node idle cpumasks")
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The modify logic registers temporary ftrace_ops object (tmp_ops) to trigger
the slow path for all direct callers to be able to safely modify attached
addresses.
At the moment we use ops->func_hash for tmp_ops filter, which represents all
the systems attachments. It's faster to use just the passed hash filter, which
contains only the modified sites and is always a subset of the ops->func_hash.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Menglong Dong <menglong8.dong@gmail.com>
Cc: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260312123738.129926-1-jolsa@kernel.org
Fixes: e93672f770 ("ftrace: Add update_ftrace_direct_mod function")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260318185512.1b6c7db4@gandalf.local.home
Fixes: 7b382efd5e ("tracing: Allow the top level trace_marker to write into another instances")
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/20260225133122.237275-1-sashal@kernel.org/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The system call trace events call trace_user_fault_read() to read the user
space part of some system calls. This is done by grabbing a per-cpu
buffer, disabling migration, enabling preemption, calling
copy_from_user(), disabling preemption, enabling migration and checking if
the task was preempted while preemption was enabled. If it was, the buffer
is considered corrupted and it tries again.
There's a safety mechanism that will fail out of this loop if it fails 100
times (with a warning). That warning message was triggered in some
pi_futex stress tests. Enabling the sched_switch trace event and
traceoff_on_warning, showed the problem:
pi_mutex_hammer-1375 [006] d..21 138.981648: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981651: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981656: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981659: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981664: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981667: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981671: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981675: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981679: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981682: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981687: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981690: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981695: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981698: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981703: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981706: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981711: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981714: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981719: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981722: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981727: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981730: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981735: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981738: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
What happened was the task 1375 was flagged to be migrated. When
preemption was enabled, the migration thread woke up to migrate that task,
but failed because migration for that task was disabled. This caused the
loop to fail to exit because the task scheduled out while trying to read
user space.
Every time the task enabled preemption the migration thread would schedule
in, try to migrate the task, fail and let the task continue. But because
the loop would only enable preemption with migration disabled, it would
always fail because each time it enabled preemption to read user space,
the migration thread would try to migrate it.
To solve this, when the loop fails to read user space without being
scheduled out, enabled and disable preemption with migration enabled. This
will allow the migration task to successfully migrate the task and the
next loop should succeed to read user space without being scheduled out.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260316130734.1858a998@gandalf.local.home
Fixes: 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read user space")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Jenny reported that in sync_linked_regs() the BPF_ADD_CONST32 flag is
checked on known_reg (the register narrowed by a conditional branch)
instead of reg (the linked target register created by an alu32 operation).
Example case with reg:
1. r6 = bpf_get_prandom_u32()
2. r7 = r6 (linked, same id)
3. w7 += 5 (alu32 -- r7 gets BPF_ADD_CONST32, zero-extended by CPU)
4. if w6 < 0xFFFFFFFC goto safe (narrows r6 to [0xFFFFFFFC, 0xFFFFFFFF])
5. sync_linked_regs() propagates to r7 but does NOT call zext_32_to_64()
6. Verifier thinks r7 is [0x100000001, 0x100000004] instead of [1, 4]
Since known_reg above does not have BPF_ADD_CONST32 set above, zext_32_to_64()
is never called on alu32-derived linked registers. This causes the verifier
to track incorrect 64-bit bounds, while the CPU correctly zero-extends the
32-bit result.
The code checking known_reg->id was correct however (see scalars_alu32_wrap
selftest case), but the real fix needs to handle both directions - zext
propagation should be done when either register has BPF_ADD_CONST32, since
the linked relationship involves a 32-bit operation regardless of which
side has the flag.
Example case with known_reg (exercised also by scalars_alu32_wrap):
1. r1 = r0; w1 += 0x100 (alu32 -- r1 gets BPF_ADD_CONST32)
2. if r1 > 0x80 - known_reg = r1 (has BPF_ADD_CONST32), reg = r0 (doesn't)
Hence, fix it by checking for (reg->id | known_reg->id) & BPF_ADD_CONST32.
Moreover, sync_linked_regs() also has a soundness issue when two linked
registers used different ALU widths: one with BPF_ADD_CONST32 and the
other with BPF_ADD_CONST64. The delta relationship between linked registers
assumes the same arithmetic width though. When one register went through
alu32 (CPU zero-extends the 32-bit result) and the other went through
alu64 (no zero-extension), the propagation produces incorrect bounds.
Example:
r6 = bpf_get_prandom_u32() // fully unknown
if r6 >= 0x100000000 goto out // constrain r6 to [0, U32_MAX]
r7 = r6
w7 += 1 // alu32: r7.id = N | BPF_ADD_CONST32
r8 = r6
r8 += 2 // alu64: r8.id = N | BPF_ADD_CONST64
if r7 < 0xFFFFFFFF goto out // narrows r7 to [0xFFFFFFFF, 0xFFFFFFFF]
At the branch on r7, sync_linked_regs() runs with known_reg=r7
(BPF_ADD_CONST32) and reg=r8 (BPF_ADD_CONST64). The delta path
computes:
r8 = r7 + (delta_r8 - delta_r7) = 0xFFFFFFFF + (2 - 1) = 0x100000000
Then, because known_reg->id has BPF_ADD_CONST32, zext_32_to_64(r8) is
called, truncating r8 to [0, 0]. But r8 used a 64-bit ALU op -- the
CPU does NOT zero-extend it. The actual CPU value of r8 is
0xFFFFFFFE + 2 = 0x100000000, not 0. The verifier now underestimates
r8's 64-bit bounds, which is a soundness violation.
Fix sync_linked_regs() by skipping propagation when the two registers
have mixed ALU widths (one BPF_ADD_CONST32, the other BPF_ADD_CONST64).
Lastly, fix regsafe() used for path pruning: the existing checks used
"& BPF_ADD_CONST" to test for offset linkage, which treated
BPF_ADD_CONST32 and BPF_ADD_CONST64 as equivalent.
Fixes: 7a433e5193 ("bpf: Support negative offsets, BPF_SUB, and alu32 for linked register tracking")
Reported-by: Jenny Guanni Qu <qguanni@gmail.com>
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260319211507.213816-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode.
Fixes: bffacdb80b ("bpf: Recognize special arithmetic shift in the verifier")
Signed-off-by: Daniel Wade <danjwade95@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260314021521.128361-2-danjwade95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs().
Fixes: ec0e2da95f ("bpf: Support new signed div/mod instructions.")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Link: https://lore.kernel.org/r/20260311011116.2108005-2-qguanni@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The sleepable context check for global function calls in
check_func_call() open-codes the same checks that in_sleepable_context()
already performs. Replace the open-coded check with a call to
in_sleepable_context() and use non_sleepable_context_description() for
the error message, consistent with check_helper_call() and
check_kfunc_call().
Note that in_sleepable_context() also checks active_locks, which
overlaps with the existing active_locks check above it. However, the two
checks serve different purposes: the active_locks check rejects all
global function calls while holding a lock (not just sleepable ones), so
it must remain as a separate guard.
Update the expected error messages in the irq and preempt_lock selftests
to match.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260318174327.3151925-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_kfunc_call() has multiple scattered checks that reject sleepable
kfuncs in various non-sleepable contexts (RCU, preempt-disabled, IRQ-
disabled). These are the same conditions already checked by
in_sleepable_context(), so replace them with a single consolidated
check.
This also simplifies the preempt lock tracking by flattening the nested
if/else structure into a linear chain: preempt_disable increments,
preempt_enable checks for underflow and decrements. The sleepable check
is kept as a separate block since it is logically distinct from the lock
accounting.
No functional change since in_sleepable_context() checks all the same
state (active_rcu_locks, active_preempt_locks, active_locks,
active_irq_id, in_sleepable).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260318174327.3151925-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_helper_call() prints the error message for every
env->cur_state->active* element when calling a sleepable helper.
Consolidate all of them into a single print statement.
The check for env->cur_state->active_locks was not part of the removed
print statements and will not be triggered with the consolidated print
as well because it is checked in do_check() before check_helper_call()
is even reached.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260318174327.3151925-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098
Assisted-by: Claude:claude-opus-4-6
Fixes: f18b03faba ("bpf: Implement BPF exceptions")
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260320000809.643798-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
dmemcg_parse_limit does not use the region parameter. Remove it.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In the default built-in idle CPU selection policy, when @prev_cpu is
busy and no fully idle core is available, try to place the task on its
SMT sibling if that sibling is idle, before searching any other idle CPU
in the same LLC.
Migration to the sibling is cheap and keeps the task on the same core,
preserving L1 cache and reducing wakeup latency.
On large SMT systems this appears to consistently boost throughput by
roughly 2-3% on CPU-bound workloads (running a number of tasks equal to
the number of SMT cores).
Cc: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Resolve conflict between this change in the upstream kernel:
4c652a4772 ("rseq: Mark rseq_arm_slice_extension_timer() __always_inline")
... and this pending change in timers/core:
0e98eb1481 ("entry: Prepare for deferred hrtimer rearming")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This effectively gives us an ability to create the pid namespace init as
a child of the process (setns-ed to the pid namespace) different to the
process which created the pid namespace itself.
Original problem:
There is a cool set_tid feature in clone3() syscall, it allows you to
create process with desired pids on multiple pid namespace levels. Which
is useful to restore processes in CRIU for nested pid namespace case.
In nested container case we can potentially see this kind of pid/user
namespace tree:
Process
┌─────────┐
User NS0 ──▶ Pid NS0 ──▶ Pid p0 │
│ │ │ │
▼ ▼ │ │
User NS1 ──▶ Pid NS1 ──▶ Pid p1 │
│ │ │ │
... ... │ ... │
│ │ │ │
▼ ▼ │ │
User NSn ──▶ Pid NSn ──▶ Pid pn │
└─────────┘
So to create the "Process" and set pids {p0, p1, ... pn} for it on all
pid namespace levels we can use clone3() syscall set_tid feature, BUT
the syscall does not allow you to set pid on pid namespace levels you
don't have permission to. So basically you have to be in "User NS0" when
creating the "Process" to actually be able to set pids on all levels.
It is ok for almost any process, but with pid namespace init this does
not work, as currently we can only create pid namespace init and the pid
namespace itself simultaneously, so to make "Pid NSn" owned by "User
NSn" we have to be in the "User NSn".
We can't possibly be in "User NS0" and "User NSn" at the same time,
hence the problem.
Alternative solution:
Yes, for the case of pid namespace init we can use old and gold
/proc/sys/kernel/ns_last_pid interface on the levels lower than n. But
it is much more complicated and introduces tons of extra code to do. It
would be nice to make clone3() set_tid interface also aplicable to this
corner case.
Implementation:
Now when anyone can setns to the pid namespace before the creation of
init, and thus multiple processes can fork children to the pid
namespace, it is important that we enforce the first process created is
always pid namespace init. (Note that this was done by the previous
preparational patch as a standalon useful change.) We only allow other
processes after the init sets pid_namespace->child_reaper.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
--
v2: Use *_ONCE for ->child_reaper accesses atomicity, and avoid taking
task_list lock for reading it. Rebase to master, and thus remove
now excess pidns_ready variable.
v3: Separate *_ONCE change and "init is first" checks into separate
commits.
v5: Add Andrei's review tag.
->child_reaper which can influence the pid namespace, so it looks like
the pid namespace is fully setup at the point when init sets
->child_reaper to receive more processes. Thus tasklist lock looks
excess in pidns_for_children_get()'s ->child_reaper check and it should
be safe not to have it in the corresponding check in alloc_pid()
(introduced earlier in this series).
Link: https://patch.msgid.link/20260318122157.280595-4-ptikhomirov@virtuozzo.com
Acked-by: Andrei Vagin <avagin@google.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Note: I didn't find anything in copy_process() around setting the
Signed-off-by: Christian Brauner <brauner@kernel.org>
This moves the condition (tid != 1 && !tmp->child_reaper) to after idr
alloc, so it not only covers that first process in pid namespace has pid
1 in case of clone3(set_tid) requesting wrong pid, but also if idr
itself gives wrong pid for some reason.
This could've been the case before this patch, when creating first
process the alloc_pid()->pidfs_add_pid() code path fails, so that the
idr->idr_next is non zero anymore and next process calling to
alloc_pid(), will get 2 as a pid from idr_alloc_cyclic(). Though thanks
to PIDNS_ADDING logic, free_pid() disables further pid allocation in
this case and it does not lead to any real problem.
Note: This is also a preparation for the next patch in the series, which
will introduce an ability of creating init from the task different to
the task which had created the pid namespace. Needed to make sure that
init is always first, even in this new case.
--
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Link: https://patch.msgid.link/20260318122157.280595-3-ptikhomirov@virtuozzo.com
v3: Split from main commit. Merge two checks of ->child_reaper into one.
v4: Update commit message about PIDNS_ADDING.
v5: Add Andrei's review tag.
Signed-off-by: Christian Brauner <brauner@kernel.org>
To avoid potential problems related to cpu/compiler optimizations around
->child_reaper, let's use WRITE_ONCE (additional to task_list lock)
everywhere we write it and use READ_ONCE where we read it without
explicit lock. Note: It also pairs with existing READ_ONCE with no lock
in nsfs_fh_to_dentry().
Also let's add ASSERT_EXCLUSIVE_WRITER before write to identify to KCSAN
that we don't expect any concurrent ->child_reaper modifications, and
those must be detected.
--
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Link: https://patch.msgid.link/20260318122157.280595-2-ptikhomirov@virtuozzo.com
v3: Split from main commit. Add ASSERT_EXCLUSIVE_WRITER.
v5: Add one more READ_ONCE for access without lock in free_pid().
Signed-off-by: Christian Brauner <brauner@kernel.org>
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design, which was
made in the context of systems far smaller than today, is based on the
assumption that the to be monitored clocksource (TSC) can be trivially
compared against a known to be stable clocksource (HPET/ACPI-PM timer).
Over the years it turned out that this approach has major flaws:
- Long delays between watchdog invocations can result in wrap arounds
of the reference clocksource
- Scalability of the reference clocksource readout can degrade on large
multi-socket systems due to interconnect congestion
This was addressed with various heuristics which degraded the accuracy of
the watchdog to the point that it fails to detect actual TSC problems on
older hardware which exposes slow inter CPU drifts due to firmware
manipulating the TSC to hide SMI time.
To address this and bring back sanity to the watchdog, rewrite the code
completely with a different approach:
1) Restrict the validation against a reference clocksource to the boot
CPU, which is usually the CPU/Socket closest to the legacy block which
contains the reference source (HPET/ACPI-PM timer). Validate that the
reference readout is within a bound latency so that the actual
comparison against the TSC stays within 500ppm as long as the clocks
are stable.
2) Compare the TSCs of the other CPUs in a round robin fashion against
the boot CPU in the same way the TSC synchronization on CPU hotplug
works. This still can suffer from delayed reaction of the remote CPU
to the SMP function call and the latency of the control variable cache
line. But this latency is not affecting correctness. It only affects
the accuracy. With low contention the readout latency is in the low
nanoseconds range, which detects even slight skews between CPUs. Under
high contention this becomes obviously less accurate, but still
detects slow skews reliably as it solely relies on subsequent readouts
being monotonically increasing. It just can take slightly longer to
detect the issue.
3) Rewrite the watchdog test so it tests the various mechanisms one by
one and validating the result against the expectation.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Daniel J Blueman <daniel@quora.org>
Link: https://patch.msgid.link/20260123231521.926490888@kernel.org
Link: https://patch.msgid.link/87h5qeomm5.ffs@tglx
Add /sys/module/*/import_ns to expose imported namespaces for
currently loaded modules. The file contains one namespace per line and
only exists for modules that import at least one namespace.
Previously, the only way for userspace to inspect the symbol
namespaces a module imports is to locate the .ko on disk and invoke
modinfo(8) to decompress/parse the metadata. The kernel validated
namespaces at load time, but it was otherwise discarded.
Exposing this data via sysfs provides a runtime mechanism to verify
which namespaces are being used by modules. For example, this allows
userspace to audit driver API access in Android GKI, which uses symbol
namespaces to restrict vendor drivers from using specific kernel
interfaces (e.g., direct filesystem access).
Signed-off-by: Nicholas Sielicki <linux@opensource.nslick.com>
[Sami: Updated the commit message to explain motivation.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
While very unlikely, local storage theoretically may leak memory of the
size of "struct bpf_local_storage" when destroy() fails to grab
local_storage->lock and initializes selem->local_storage before other
racing map_free() see it. Warn the user to allow debugging the issue
instead of leaking the memory silently.
Note that test_maps in bpf selftests already stress tested
bpf_selem_unlink_nofail() by creating 4096 sockets and then immediately
destroying them in multiple threads. With 64 threads, 64 x 4096 socket
local storages were created and destroyed during the test and no warning
in the function were triggered.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260318224219.615105-1-ameryhung@gmail.com
Currently, local storage may deadlock when deferring freeing selem or
local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace()
in NMI or reentrant. Since deleting selem in NMI is an unlikely use
case, partially mitigate it by returning error when calling from
bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible
to deadlock through reentrant. A full mitigation requires returning
error when irqs_disabled() is true, which, however is too heavy-handed
for bpf_xxx_storage_delete().
The long-term solution requires _nolock versions of call_rcu. Another
possible solution is to defer the free through irq_work [0], but it
would grow the size of selem, which is non-ideal.
The check is only needed in bpf_selem_unlink(), which is used by helpers
and syscalls. bpf_selem_unlink_nofail() is fine as it is called during
map and owner tear down that never run in NMI or reentrant.
[0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/
Fixes: a10787e6d5 ("bpf: Enable task local storage for tracing programs")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260319025716.2361065-1-ameryhung@gmail.com
Pull power management fixes from Rafael Wysocki:
"These fix an idle loop issue exposed by recent changes and a race
condition related to device removal in the runtime PM core code:
- Consolidate the handling of two special cases in the idle loop that
occur when only one CPU idle state is present (Rafael Wysocki)
- Fix a race condition related to device removal in the runtime PM
core code that may cause a stale device object pointer to be
dereferenced (Bart Van Assche)"
* tag 'pm-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix a race condition related to device removal
sched: idle: Consolidate the handling of two special cases
Gregory reported in [0] that the global_map_resize test when run in
repeatedly ends up failing during program load. This stems from the fact
that BTF reference has not dropped to zero after the previous run's
module is unloaded, and the older module's BTF is still discoverable and
visible. Later, in libbpf, load_module_btfs() will find the ID for this
stale BTF, open its fd, and then it will be used during program load
where later steps taking module reference using btf_try_get_module()
fail since the underlying module for the BTF is gone.
Logically, once a module is unloaded, it's associated BTF artifacts
should become hidden. The BTF object inside the kernel may still remain
alive as long its reference counts are alive, but it should no longer be
discoverable.
To fix this, let us call btf_free_id() from the MODULE_STATE_GOING case
for the module unload to free the BTF associated IDR entry, and disable
its discovery once module unload returns to user space. If a race
happens during unload, the outcome is non-deterministic anyway. However,
user space should be able to rely on the guarantee that once it has
synchronously established a successful module unload, no more stale
artifacts associated with this module can be obtained subsequently.
Note that we must be careful to not invoke btf_free_id() in btf_put()
when btf_is_module() is true now. There could be a window where the
module unload drops a non-terminal reference, frees the IDR, but the
same ID gets reused and the second unconditional btf_free_id() ends up
releasing an unrelated entry.
To avoid a special case for btf_is_module() case, set btf->id to zero to
make btf_free_id() idempotent, such that we can unconditionally invoke it
from btf_put(), and also from the MODULE_STATE_GOING case. Since zero is
an invalid IDR, the idr_remove() should be a noop.
Note that we can be sure that by the time we reach final btf_put() for
btf_is_module() case, the btf_free_id() is already done, since the
module itself holds the BTF reference, and it will call this function
for the BTF before dropping its own reference.
[0]: https://lore.kernel.org/bpf/cover.1773170190.git.grbell@redhat.com
Fixes: 36e68442d1 ("bpf: Load and verify kernel module BTFs")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Reported-by: Gregory Bell <grbell@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260312205307.1346991-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* Use the preferred `unsigned int` over plain `unsigned` for the `num`
parameter.
* Synchronize the parameter names in moduleparam.h with the ones used by
the implementation in params.c.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
When setting a charp module parameter, the param_set_charp() function
allocates memory to store a copy of the input value. Later, when the module
is potentially unloaded, the destroy_params() function is called to free
this allocated memory.
However, destroy_params() is available only when CONFIG_SYSFS=y, otherwise
only a dummy variant is present. In the unlikely case that the kernel is
configured with CONFIG_MODULES=y and CONFIG_SYSFS=n, this results in
a memory leak of charp values when a module is unloaded.
Fix this issue by making destroy_params() always available when
CONFIG_MODULES=y. Rename the function to module_destroy_params() to clarify
that it is intended for use by the module loader.
Fixes: e180a6b775 ("param: fix charp parameters set via sysfs")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Use the "sd_llc" passed to select_idle_cpu() to obtain the
"sd_llc_shared" instead of dereferencing the per-CPU variable.
Since "sd->shared" is always reclaimed at the same time as "sd" via
call_rcu() and update_top_cache_domain() always ensures a valid
"sd->shared" assignment when "sd_llc" is present, "sd_llc->shared" can
always be dereferenced without needing an additional check.
While at it move the cpumask_and() operation after the SIS_UTIL bailout
check to avoid unnecessarily computing the cpumask.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-10-kprateek.nayak@amd.com
select_task_rq_fair() is always called with p->pi_lock held and IRQs
disabled which makes it equivalent of an RCU read-side.
Since commit 71fedc41c2 ("sched/fair: Switch to
rcu_dereference_all()") switched to using rcu_dereference_all() in the
wakeup path, drop the explicit rcu_read_{lock,unlock}() in the fair
task's wakeup path.
Future plans to reuse select_task_rq_fair() /
find_energy_efficient_cpu() in the fair class' balance callback will do
so with IRQs disabled and will comply with the requirements of
rcu_dereference_all() which makes this safe keeping in mind future
development plans too.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-8-kprateek.nayak@amd.com
Use the "sched_domain_shared" object allocated in s_data for
"sd->shared" assignments. Assign "sd->shared" for the topmost
SD_SHARE_LLC domain before degeneration and rely on the degeneration
path to correctly pass down the shared object to "sd_llc".
sd_degenerate_parent() ensures degenerating domains must have the same
sched_domain_span() which ensures 1:1 passing down of the shared object.
If the topmost SD_SHARE_LLC domain degenerates, the shared object is
freed from destroy_sched_domain() when the last reference is dropped.
claim_allocations() NULLs out the objects that have been assigned as
"sd->shared" and the unassigned ones are freed from the __sds_free()
path.
To keep all the claim_allocations() bits in one place,
claim_allocations() has been extended to accept "s_data" and iterate the
domains internally to free both "sched_domain_shared" and the
per-topology-level data for the particular CPU in one place.
Post cpu_attach_domain(), all reclaims of "sd->shared" are handled via
call_rcu() on the sched_domain object via destroy_sched_domains_rcu().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-5-kprateek.nayak@amd.com
The "sched_domain_shared" object is allocated for every topology level
in __sdt_alloc() and is freed post sched domain rebuild if they aren't
assigned during sd_init().
"sd->shared" is only assigned for SD_SHARE_LLC domains and out of all
the assigned objects, only "sd_llc_shared" is ever used by the
scheduler.
Since only "sd_llc_shared" is ever used, and since SD_SHARE_LLC domains
never overlap, allocate only a single range of per-CPU
"sched_domain_shared" object with s_data instead of doing it per
topology level.
The subsequent commit uses the degeneration path to correctly assign the
"sd->shared" to the topmost SD_SHARE_LLC domain.
No functional changes are expected at this point.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-4-kprateek.nayak@amd.com
Subsequent changes to assign "sd->shared" from "s_data" would
necessitate finding the topmost SD_SHARE_LLC to assign shared object to.
This is very similar to the "imb_numa_nr" computation loop except that
"imb_numa_nr" cares about the first domain without the SD_SHARE_LLC flag
(immediate parent of sd_llc) whereas the "sd->shared" assignment would
require sd_llc itself.
Extract the "imb_numa_nr" calculation into a helper
adjust_numa_imbalance() and use the current loop in the
build_sched_domains() to find the sd_llc.
While at it, guard the call behind CONFIG_NUMA's status since
"imb_numa_nr" only makes sense on NUMA enabled configs with SD_NUMA
domains.
No functional changes intended.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-3-kprateek.nayak@amd.com
The "sd_weight" used for calculating the load balancing interval, and
its limits, considers the span weight of the entire topology level
without accounting for cpuset partitions.
For example, consider a large system of 128CPUs divided into 8 * 16CPUs
partition which is typical when deploying virtual machines:
[ PKG Domain: 128CPUs ]
[Partition0: 16CPUs][Partition1: 16CPUs] ... [Partition7: 16CPUs]
Although each partition only contains 16CPUs, the load balancing
interval is set to a minimum of 128 jiffies considering the span of the
entire domain with 128CPUs which can lead to longer imbalances within
the partition although balancing within is cheaper with 16CPUs.
Compute the "sd_weight" after computing the "sd_span" considering the
cpu_map covered by the partition, and set the load balancing interval,
and its limits accordingly.
For the above example, the balancing intervals for the partitions PKG
domain changes as follows:
before after
balance_interval 128 16
min_interval 128 16
max_interval 256 32
Intervals are now proportional to the CPUs in the partitioned domain as
was intended by the original formula.
Fixes: cb83b629ba ("sched/numa: Rewrite the CONFIG_NUMA sched domain support")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-2-kprateek.nayak@amd.com
