Reverts the following commits that introduced legacy ntfs
driver alias and related support code:
74871791ff ntfs3: serve as alias for the legacy ntfs driver
1ff2e95660 fs/ntfs3: Redesign legacy ntfs support
9b872cc50d ntfs3: add legacy ntfs file operations
d55f90e9b2 ntfs3: enforce read-only when used as legacy ntfs driver
The legacy ntfs driver has been remade as a new implementation, so the
alias and related codes in ntfs3 are no longer needed.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- improve readahead for bitmap initialization and large directory scans
- fsync files by syncing parent inodes
- drop of preallocated clusters for sparse and compressed files
- zero-fill folios beyond i_valid in ntfs_read_folio()
- implement llseek SEEK_DATA/SEEK_HOLE by scanning data runs
- implement iomap-based file operations
- allow explicit boolean acl/prealloc mount options
- fall-through between switch labels
- delayed-allocation (delalloc) support
Fixes:
- check return value of indx_find to avoid infinite loop
- initialize new folios before use
- infinite loop in attr_load_runs_range on inconsistent metadata
- infinite loop triggered by zero-sized ATTR_LIST
- ntfs_mount_options leak in ntfs_fill_super()
- deadlock in ni_read_folio_cmpr
- circular locking dependency in run_unpack_ex
- prevent infinite loops caused by the next valid being the same
- restore NULL folio initialization in ntfs_writepages()
- slab-out-of-bounds read in DeleteIndexEntryRoot
Updates:
- allow readdir() to finish after directory mutations without rewinddir()
- handle attr_set_size() errors when truncating files
- make ntfs_writeback_ops static
- refactor duplicate kmemdup pattern in do_action()
- avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
Replaced:
- use wait_on_buffer() directly
- rename ni_readpage_cmpr into ni_read_folio_cmpr"
* tag 'ntfs3_for_7.0' of https://github.com/Paragon-Software-Group/linux-ntfs3: (26 commits)
fs/ntfs3: add delayed-allocation (delalloc) support
fs/ntfs3: avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
fs/ntfs3: add fall-through between switch labels
fs/ntfs3: allow explicit boolean acl/prealloc mount options
fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot
ntfs3: Restore NULL folio initialization in ntfs_writepages()
ntfs3: Refactor duplicate kmemdup pattern in do_action()
fs/ntfs3: prevent infinite loops caused by the next valid being the same
fs/ntfs3: make ntfs_writeback_ops static
ntfs3: fix circular locking dependency in run_unpack_ex
fs/ntfs3: implement iomap-based file operations
fs/ntfs3: fix deadlock in ni_read_folio_cmpr
fs/ntfs3: implement llseek SEEK_DATA/SEEK_HOLE by scanning data runs
fs/ntfs3: zero-fill folios beyond i_valid in ntfs_read_folio()
fs/ntfs3: handle attr_set_size() errors when truncating files
fs/ntfs3: drop preallocated clusters for sparse and compressed files
fs/ntfs3: fsync files by syncing parent inodes
fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super()
fs/ntfs3: allow readdir() to finish after directory mutations without rewinddir()
fs/ntfs3: improve readahead for bitmap initialization and large directory scans
...
Pull vfs 'struct filename' updates from Al Viro:
"[Mostly] sanitize struct filename handling"
* tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (68 commits)
sysfs(2): fs_index() argument is _not_ a pathname
alpha: switch osf_mount() to strndup_user()
ksmbd: use CLASS(filename_kernel)
mqueue: switch to CLASS(filename)
user_statfs(): switch to CLASS(filename)
statx: switch to CLASS(filename_maybe_null)
quotactl_block(): switch to CLASS(filename)
chroot(2): switch to CLASS(filename)
move_mount(2): switch to CLASS(filename_maybe_null)
namei.c: switch user pathname imports to CLASS(filename{,_flags})
namei.c: convert getname_kernel() callers to CLASS(filename_kernel)
do_f{chmod,chown,access}at(): use CLASS(filename_uflags)
do_readlinkat(): switch to CLASS(filename_flags)
do_sys_truncate(): switch to CLASS(filename)
do_utimes_path(): switch to CLASS(filename_uflags)
chdir(2): unspaghettify a bit...
do_fchownat(): unspaghettify a bit...
fspick(2): use CLASS(filename_flags)
name_to_handle_at(): use CLASS(filename_uflags)
vfs_open_tree(): use CLASS(filename_uflags)
...
... so don't use __getname() there. Switch it (and ntfs_d_hash(), while
we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash()
almost certainly can do with smaller allocations, but let ntfs folks
deal with that - keep the allocation size as-is for now.
Stop abusing names_cachep in ntfs, period - various uses of that thing
in there have nothing to do with pathnames; just use k[mz]alloc() and
be done with that. For now let's keep sizes as-in, but AFAICS none of
the users actually want PATH_MAX.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add the setlease file_operation to ntfs_file_operations,
ntfs_legacy_file_operations, ntfs_dir_operations, and
ntfs_legacy_dir_operations, pointing to generic_setlease. A future
patch will change the default behavior to reject lease attempts with
-EINVAL when there is no setlease file operation defined. Add
generic_setlease to retain the ability to set leases on this
filesystem.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260108-setlease-6-20-v1-14-ea4dec9b67fa@kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Some xfstests expect fsync() on a file or directory to also persist
directory metadata up the parent chain. Using generic_file_fsync() is not
sufficient for ntfs, because parent directories are not explicitly
written out.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This patch introduces a per-directory version counter that increments on
each directory modification (indx_insert_entry() / indx_delete_entry()).
ntfs_readdir() uses this version to detect whether the directory has
changed since enumeration began. If readdir() reaches end-of-directory
but the version has changed, the walk restarts from the beginning of the
index tree instead of returning prematurely. This provides rmdir-like
behavior for tools that remove entries as they enumerate them.
Prior to this change, bonnie++ directory operations could fail due to
premature termination of readdir() during concurrent index updates.
With this patch applied, bonnie++ completes successfully with no errors.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Previously sequential reads operations relied solely on single-page reads,
causing the block layer to perform many synchronous I/O requests,
especially for large volumes or large directories. This patch introduces
explicit readahead via page_cache_sync_readahead() and file_ra_state to
reduce I/O latency and improve sequential throughput.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Reformatted the driver code according to the current .clang-format rules
and updated description of used terminology. No functional changes
intended.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
An additional condition causes the mft record to be read from disk
and get the file type dt_type.
Fixes: 22457c047e ("fs/ntfs3: Modified fix directory element type detection")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Pull ntfs3 updates from Konstantin Komarov:
"Fixes:
- reusing of the file index (could cause the file to be trimmed)
- infinite dir enumeration
- taking DOS names into account during link counting
- le32_to_cpu conversion, 32 bit overflow, NULL check
- some code was refactored
Changes:
- removed max link count info display during driver init
Remove:
- atomic_open has been removed for lack of use"
* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Break dir enumeration if directory contents error
fs/ntfs3: Fix case when index is reused during tree transformation
fs/ntfs3: Mark volume as dirty if xattr is broken
fs/ntfs3: Always make file nonresident on fallocate call
fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
fs/ntfs3: Use variable length array instead of fixed size
fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
fs/ntfs3: Check 'folio' pointer for NULL
fs/ntfs3: Missed le32_to_cpu conversion
fs/ntfs3: Remove max link count info display during driver init
fs/ntfs3: Taking DOS names into account during link counting
fs/ntfs3: remove atomic_open
fs/ntfs3: use kcalloc() instead of kzalloc()
If we somehow attempt to read beyond the directory size, an error
is supposed to be returned.
However, in some cases, read requests do not stop and instead enter
into a loop.
To avoid this, we set the position in the directory to the end.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
While ntfs3 supports discards, FITRIM ioctl() command has defined
only for regular files. This may confuse users trying to invoke
`fstrim` utility with the directory argument (for example, call
`fstrim <mountpoint>` which is the common practice). In this case,
ioctl() returns -ENOTTY without any error messages in kernel ring
buffer, this may be easily interpreted as no support for discards
in ntfs3 driver.
Currently only FITRIM command implemented in ntfs_ioctl() and
passed inode used only for dereferencing NTFS superblock, so
no need for separate ioctl() handler for directories, just add
existing ntfs_ioctl() handler to ntfs_dir_operations.
Signed-off-by: Nekun <nekokun@firemail.cc>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Unfortunately reparse attribute is used for many purposes (several dozens).
It is not possible here to know is this name symlink or not.
To get exactly the type of name we should to open inode (read mft).
getattr for opened file (fstat) correctly returns symlink.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Calling stat() from userspace correctly identified junctions in an NTFS
partition as symlinks, but using readdir() and iterating through the
directory containing the same junction did not identify the junction
as a symlink.
When emitting directory contents, check FILE_ATTRIBUTE_REPARSE_POINT
attribute to detect junctions and report them as links.
Signed-off-by: Gabriel Marcano <gabemarcano@yahoo.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now ntfs_utf16_to_nls takes length as one of arguments.
If length of symlink > 255, then we tried to convert
length of symlink +- some random number.
Now 255 symbols limit was removed.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Use pointer to mount options. We want to do this because we will use new
mount api which will benefit that we have spi and mount options in
different allocations. When we remount we do not have to make whole new
spi it is enough that we will allocate just mount options.
Please note that we can do example remount lot cleaner but things will
change in next patch so this should be just functional.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Capitalize comments and end with period for better reading.
Also function comments are now little more kernel-doc style. This way we
can easily convert them to kernel-doc style if we want. Note that these
are not yet complete with this style. Example function comments start
with /* and in kernel-doc style they start /**.
Use imperative mood in function descriptions.
Change words like ntfs -> NTFS, linux -> Linux.
Use "we" not "I" when commenting code.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
