Miri Korenblit says:
====================
iwlwifi feature, notably
- disable features in fips
- remove RX OMI feature code
- A few fixes and cleanups
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This version doesn't provide the sta id, so we need to look it up -
assuming that no other sta exists, since one of the conditions of
entering OMI is not having P2P/TDLS.
But when we leave OMI, because of the P2P/TDLS activation, the P2P/TDLS
sta can already exist while we receive the notification from the FW.
This causes an error log which is incorrect.
Since OMI is only supported in SC, which is not shipped yet, no one will
use a FW with the old version.
Remove support for it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.b716b9cebaa7.I2a1cc4be441dbbb5566a9a3d2d330d956ff3ed38@changeid
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.e1f62a9a603c.I7b57a481122074b1f40d39cd31db2e5262668eb2@changeid
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.795ec0cb8817.I9ec9a3508e7935e8d1833ea3e086066fdefee644@changeid
When fips_enabled is set, keys will not be given to the
hardware by mac80211 since the hardware isn't certified.
In this case, various features cannot work correctly as
the firmware needs to handle frames, but it then cannot
since no keys are available.
Disable features:
- WoWLAN since no keys etc.
- MFP since some frames need to be handled in firmware
- EHT/6GHz since MFP is required
Also restrict A-MSDU size since A-MSDUs cannot be split
up by hardware and thus need to fit into the RX buffers
in one piece.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.329fade58a27.I0be27dd329643cc5fdf79a8c8b8f6d2e6fb5c175@changeid
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
We have a flexible struct iwl_tx_cmd_v6 in the middle of a few structs,
but those don't even need the flexible part.
So, we add iwl_tx_cmd_v6_params, that will contain everything except the
flexible array and use this one for the containing structs.
Also, as part of the refactoring remove unused flex array `payload`.
So, with these changes, fix the following warnings:
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://msgid.link/aCUOQ6wdD1jQjO36@kspp
[use iwl_tx_cmd_v6_params as described in the changed commit message]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709224608.0785a61b0826.I6da02c2a12a5ed1e6d317045a6995d132850a455@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
In iwl_mvm_wowlan_config_rsc_tsc() when calling iwl_mvm_send_cmd_pdu()
we are accidentally passing the size of a pointer rather than the size
of the object pointed by it.
Fix the expression in order to pass the approriate object length.
Fixes: 493681d9f9 ("wifi: iwlwifi: remove support of version 4 of iwl_wowlan_rsc_tsc_params_cmd")
Address-Coverity-ID: 1647627 ("Incorrect expression (SIZEOF_MISMATCH)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://patch.msgid.link/20250716201911.700-1-antonio@mandelbit.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Miri Korenblit says:
====================
iwlwifi-fixes
- missing unlock in error path
- Avoid FW assert on bad command values
- fix kernel panic due to incorrect index calculation
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connected to an AP, the PHY will typically be tuned to
a higher bandwidth than the beacons are transmitted on, as
they are normally only transmitted on 20 MHz. This can mean
that another STA is simultaneously transmitting on another
channel of the higher bandwidth, and apparently this energy
may be taken into account by the PHY, resulting in elevated
energy readings.
To work around this, track the firmware's corrected beacon
energy data and replace the RSSI in beacons by that. The
replacement happens for all beacons received in the context
of the current MAC or link (depending on FW version), in
which case the filters will drop all else. For a scan, which
is only tuning to 20 MHz channels, the MAC/link ID will be
one that isn't found (the AUX ID 4), and no correction will
be done (nor is it needed.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.324bfe7027ff.I160f947e7aab30e0110a7019ed46186e57c3de14@changeid
Since the iwlmvm driver now only supports pre-MLO devices,
we no longer need to maintain an extra explicit link ID;
valid MAC IDs and link IDs are both in the range 0-3 and
the driver always has a 1:1 MAC/link correspondence. Thus,
simply use the MAC ID as the link ID as well.
This simplifies some further work because on RX the ID is
given but there is some confusion about which versions of
the firmware report MAC and which report link ID.
While at it, clarify iwl_mvm_handle_missed_beacons_notif()
code a bit so it doesn't look like an invalid vif pointer
is being used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250711183056.005aa5fe34fe.Ib0c1187453f46ce49dc0f9f58907ee21f5b52634@changeid
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.f0b5e19f77f5.I958f4926f168cdad6d4d7720ebde2f5e812b297d@changeid
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.10091484e38e.I45daf089189f606f3879ca4538fb46303d761710@changeid
The default capabilities were set to much more than the hardware
currently is intended to support, and then masked off for only
the GL MAC type. However, this was due to some miscommunication
and is incorrect, it should've been masked off for all current
and planned MACs/RFs. Instead of doing this removing and adding
of capabilities, simply list the ones that currently apply to
all devices. If this changes for a new device type we can change
the code, but at least the driver won't erroneously advertise
some capabilities that aren't actually implemented in hardware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.69b9dac7d906.I7885499bc80453d5a84285ec927f5e89f9adfb21@changeid
