Due to a missing initialization there was no way to map fbdev memory.
Thus for example using the Xserver with the fbdev driver failed.
This fix adds initialization for fix.smem_start and fix.smem_len
in the fb_info structure, which fixes this problem.
Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Egbert Eich <eich@suse.de>
[pulled from SuSE tree by me - airlied]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Here's a handful of i915 fixes for drm-next/v4.4. Imre's commit alone
should address the remaining warnings galore you experienced on
Skylake. Almost all of the rest are also fixes against user or QA
reported bugs, with references.
* tag 'drm-intel-next-fixes-2015-11-06' of git://anongit.freedesktop.org/drm-intel:
drm/i915/skl: disable display side power well support for now
drm/i915: Extend DSL readout fix to BDW and SKL.
drm/i915: Do graphics device reset under forcewake
drm/i915: Skip fence installation for objects with rotated views (v4)
drm/i915: add quirk to enable backlight on Dell Chromebook 11 (2015)
drm/i915/skl: Prevent unclaimed register writes on skylake.
drm/i915: disable CPU PWM also on LPT/SPT backlight disable
drm/i915: Fix maxfifo watermark calc on vlv cursor planes
drm/i915: add hotplug activation period to hotplug update mask
One is fix for a regression in 4.3, One irq locking rework.
* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Relax irq locking somewhat
drm/vmwgfx: Properly flush cursor updates and page-flips
Relax locking with the goal of reducing the number of locking cycles and
time spent with irqs disabled.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
With the introduction of the new command buffer mechanism,
proper care wasn't taken to flush cursor image updates and
event-less screen-target page-flips.
Fix this by introducing explicit flush points.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
We have a timed release of a forcewake when using
I915_READ/WRITE macros. wait_for() macro will go to quite
long sleep if the first read doesn't satisfy the condition for
successful exit. With these two interacting, it is possible that
we lose the forcewake during the wait_for() and the subsequent read
will reaquire forcewake.
Further experiments with skl shows that when we lose forcewake,
we lose the reset request we submitted. So reset request register
is not power context saved.
Grab forcewakes for all engines before starting the reset/request
dance so that all requests stay valid for the duration of reset
requisition across all the engines.
v2: Add comment on power well sleeps. Wrap the reset handling
under forcewake instead of just reset requests (Chris)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92774
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomi Sarvela <tomix.p.sarvela@intel.com> (v1, v2)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446721898-1450-1-git-send-email-mika.kuoppala@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
hda_intel.c:azx_probe() defers initialization of an audio controller
on the discrete GPU if the GPU is powered off. The power state of the
GPU is determined by calling vga_switcheroo_get_client_state().
vga_switcheroo_get_client_state() returns VGA_SWITCHEROO_INIT if
vga_switcheroo is not enabled, i.e. if no second GPU or no handler
has registered.
This can go wrong in the following scenario:
- Driver for the integrated GPU is not loaded.
- Driver for the discrete GPU registers with vga_switcheroo, uses driver
power control to power down the GPU, handler cuts power to the GPU.
- Driver for the audio controller gets loaded after the GPU was powered
down, calls vga_switcheroo_get_client_state() which returns
VGA_SWITCHEROO_INIT instead of VGA_SWITCHEROO_OFF.
- Consequence: azx_probe() tries to initialize the audio controller even
though the GPU is powered down.
The power state VGA_SWITCHEROO_INIT was introduced by c8e9cf7bb2
("vga_switcheroo: Add a helper function to get the client state").
It is not apparent what its benefit might be. The idea seems to
be to initialize the audio controller even if the power state is
VGA_SWITCHEROO_OFF (were vga_switcheroo enabled), but as shown
above this can fail.
Drop VGA_SWITCHEROO_INIT to solve this.
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/panel: Changes for v4.4-rc1
Just two small cleanup patches to fix coccinelle warnings.
* tag 'drm/panel/for-4.4-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/bridge: ptn3460: Fix coccinelle warnings
drm/bridge: ps8622: Fix coccinelle warnings
drm/tegra: Changes for v4.4-rc1
Just a couple of minor fixes and cleanups for this cycle.
* tag 'drm/tegra/for-4.4-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: dc: Request/free syncpoint at init/exit
drm/tegra: fb: Remove gratuituous blank line
gpu: host1x: Fix MLOCK's debug info
imx-drm fixes and color format updates
- Some correctness fixes found by coccinelle
- Add drivers/gpu/ipu-v3 directory to MAINTAINERS
- Add support for more color formats
- Fix a regression, making displays larger than FullHD work again
* tag 'imx-drm-next-2015-10-30' of git://git.pengutronix.de/git/pza/linux:
drm/imx: hdmi: fix HDMI setup to allow modes larger than FullHD
gpu: ipu-v3: fix div_ratio type
gpu: ipu-v3: csi: add support for 8 bpp grayscale sensors.
drm/imx: enable ARGB4444 16-bit color format
gpu: ipu-v3: add support for ARGB4444 16-bit color format
drm/imx: ipuv3-plane: enable support for RGBX8888 and RGBA8888 pixel formats
gpu: ipu-v3: add support for RGBX8888 and RGBA8888 pixel formats
drm/imx: enable 15-bit RGB with 1-bit alpha formats
gpu: ipu-v3: add support for 15-bit RGB with 1-bit alpha formats
MAINTAINERS: Add IPUv3 core driver to the i.MX DRM driver section
gpu: ipu-v3: ipu-csi: bool test doesn't need a comparison to false
- Updated register headers for GFX 8.1 for Stoney
- Add some new CZ revisions
- minor pageflip optimizations
- Fencing clean up
- Warning fix
- More fence cleanup
- oops fix
- Fiji fixes
* 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux: (29 commits)
drm/amdgpu: group together common fence implementation
drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
drm/amdgpu: remove now unused fence functions
drm/amdgpu: fix fence fallback check
drm/amdgpu: fix stoping the scheduler timeout
drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
drm/amdgpu: update Fiji's Golden setting
drm/amdgpu: update Fiji's rev id
drm/amdgpu: extract common code in vi_common_early_init
drm/amd/scheduler: don't oops on failure to load
drm/amdgpu: don't oops on failure to load (v2)
drm/amdgpu: don't VT switch on suspend
drm/amdgpu: Make amdgpu_mn functions inline
drm/amdgpu: remove amdgpu_fence_ref/unref
drm/amdgpu: use common fence for sync
drm/amdgpu: use the new fence_is_later
drm/amdgpu: use common fences for VMID management v2
drm/amdgpu: move ring_from_fence to common code
drm/amdgpu: switch to common fence_wait_any_timeout v2
drm/amdgpu: remove unneeded fence functions
...
We recently changed the locking in this function and now there is a
missing unlock on error. Also there are some other resources that we
should probably release as well...
Fixes: f48b2659f5 ('drm/amdgpu: fix the broken vm->mutex V2')
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
In two places amdgpu tries to tear down something it hasn't
initalised when failing. This is what happens when you
enable experimental support on topaz which then fails in
ring init.
This patch allows it to fail cleanly.
agd: Split out from from the original patch since the
scheduler is a driver independent.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In two places amdgpu tries to tear down something it hasn't
initalised when failing. This is what happens when you
enable experimental support on topaz which then fails in
ring init.
This patch allows it to fail cleanly.
v2 (agd): split out scheduler change into a separate patch
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- Vast improvements to gk20a instmem handling.
- Improved PGOB detection + GK107 support.
- Compatibility between old/new interfaces added, final missing piece to
finally enabling userspace to start using them.
- Kepler GDDR5 PLL stability improvements
- Support for non-GPIO (PWM) voltage controllers
- G8x/GT2xx memory clock improvements
- Misc other fixes
* 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (45 commits)
drm/nouveau: bump patchlevel to indicate availability of abi16/nvif interop
drm/nouveau/abi16: implement limited interoperability with usif/nvif
drm/nouveau/abi16: introduce locked variant of nouveau_abi16_get()
drm/nouveau/abi16: remove unused argument from nouveau_abi16_get()
drm/nouveau/pci: enable c800 magic for Medion Erazer X7827
drm/nouveau/pci: enable c800 magic for Lenovo Y510P
drm/nouveau/pll/gk104: fix PLL instability due to bad configuration with gddr5
drm/nouveau/clk/g84: Enable reclocking for GDDR3 G94-G200
drm/nouveau/bus/hwsq: Implement VBLANK waiting heuristic
drm/nouveau/fb/ramnv50: Script changes for G94 and up
drm/nouveau/fb/ramnv50: Deal with cards without timing entries
drm/nouveau/fb/ramnv50: Voltage GPIOs
drm/nouveau/fb/ramgt215: Restructure r111100 calculation for DDR2
drm/nouveau/fb/ramgt215: Change FBVDD/Q when BIOS asks for it
drm/nouveau/fb/ramgt215: Transform GPIO ramfuc method from FBVREF-specific to generic
drm/nouveau/bios/rammap: Identify DLLoff for >= GF100
drm/nouveau/pci: Handle 5-bit and 8-bit tag field
drm/nouveau/disp,pm: constify nvkm_object_func structures
drm/nouveau/gr: add FERMI_COMPUTE_B class to GF110+
drm/nouveau/gr: document mp error 0x10
...
This pull request includes comprehensive cleanups to HDMI part and
several fixups. In addition, this pull request includes also a defconfig
patch which enables mixer driver as default. For this, I got already
Acked-by from Krzysztof Kozlowski who is a Exynos SoC maintainer.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (34 commits)
drm/exynos/gem: remove DMA-mapping hacks used for constructing page array
ARM: exynos_defconfig: enable Exynos DRM Mixer driver
drm/exynos: simplify Kconfig component names
drm/exynos: re-arrange Kconfig entries
drm/exynos: abstract out common dependency
drm/exynos: separate Mixer and HDMI drivers
drm/exynos/mixer: replace direct cross-driver call with drm mode validation
drm/exynos: add atomic_check callback to exynos_crtc
drm/exynos/decon5433: add support for DECON-TV
drm/exynos/decon5433: remove duplicated initialization
drm/exynos/decon5433: merge different flag fields
drm/exynos/decon5433: add function to set particular register bits
drm/exynos/decon5433: fix timing registers writes
drm/exynos/decon5433: add PCLK clock
drm/exynos: cleanup name of gem object for exynos_drm
drm/exynos: fix to detach device of iommu
drm/exynos: add cursor plane support
drm/exynos: add global macro for the default primary plane
drm/exynos: fix spelling errors
drm: exynos: mixer: fix using usleep() in atomic context
...
USIF already takes the client mutex, but will need access to ABI16 data
in order to provide some limited interoperability.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch uses an approach closer to the nvidia driver to configure
both PLLs for high gddr5 memory clocks (usually above 2400MHz)
Previously nouveau used the one PLL as it was used for the lower clocks
and just adjusted the second PLL to get as close as possible to the
requested clock. This means for my card, that I got a 4050 MHz clock
although 4008 MHz was requested.
Now the driver iterates over a list of PLL configuration also used by
the nvidia driver and then adjust the second PLL to get near the
requested clock. Also it hold to some restriction I found while
analyzing the PLL configurations
This won't fix all gddr5 high clock issues itself, but it should be
fine on hybrid gpu systems as found on many laptops these days. Also
switching while normal desktop usage should be a lot more stable than
before.
v2: move the pll code into ramgk104
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Avoids waiting for VBLANKS that never arrive on headless or otherwise
unconventional set-ups. Strategy taken from MEMX.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
10053c is not even read on some cards, and I have no idea exactly what the
criteria are. Likely NVIDIA pre-scans the VBIOS and in their driver disables
all features that are never used. The practical effect should be the same
as this implementation though.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Seems to be mostly equal to DDR3 on < GT218, should improve stability for
DDR2 reclocks.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation of changing FBVDDQ, as observed on at least one GDDR3 card.
While at it, adhere to func.log[1] properly for consistency.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the hardware supports extended tag field (8-bit ones), then enable it.
This is usually done by the VBIOS, but not on some MBPs (see fdo#86537).
In case extended tag field is not supported, 5-bit tag field is used which
limits the possible number of requests to 32. Apparently bits 7:0 of
0x08841c stores some number of outstanding requests, so cap it to 32 if
extended tag is unsupported.
Fixes: fdo#86537
v2: Restrict changes to chipsets >= 0x84
v3:
* Add nvkm_pci_mask to pci.h
* Mask bit 8 before setting it
v4:
* Rename `add` argument of nvkm_pci_mask to `value`
* Move code from nvkm_pci_init to g84_pci_init and remove PCIe and chipset
checks
v5:
* Rebase code on latest PCI structure
* Restore PCIe check
* Fix namings in nvkm_pci_mask
* Rephrase part of the commit message
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These nvkm_object_func structures are never modified. All other
nvkm_object_func structures are declared as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GF110+ supports both the A and B compute classes, make sure to accept
both.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVIDIA provided the documentation for mp error 0x10, INVALID_ADDR_SPACE,
which apparently happens when trying to use an atomic operation on
local or shared memory (instead of global memory).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
