8b/10b encoding needs to add 3% fec overhead into the pbn.
In the Synapcis Cascaded MST hub, the first stage MST branch device
needs the information to determine the timeslot count for the
second stage MST branch device. Missing this overhead will leads to
insufficient timeslot allocation.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The commit c76e483cd9 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.
[How]
The comment that states "8bpc for non-edp" needs to be removed as well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sriov needs to enter/exit safe mode in update umd p state
add the cg flag to let it enter or exit while needed
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For engines not supporting soft reset, i.e. VCN, there will be a failed
ib test before mode 1 reset during asic reset. The fences in this case
are never signaled and next time when we try to free the sa_bo, kernel
will hang.
[How]
During pre_asic_reset, driver will clear job fences and afterwards the
fences' refcount will be reduced to 1. For drm_sched_jobs it will be
released in job_free_cb, and for non-sched jobs like ib_test, it's meant
to be released in sa_bo_free but only when the fences are signaled. So
we have to force signal the non_sched bad job's fence during
pre_asic_reset or the clear is not complete.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
when gfx do soft reset, mes will also do reset, if mes is not
resumed when do recover from soft reset, mes is unable to respond
in later sequence
[how]
resume mes when do gfx post soft reset
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.
[ 96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[ 100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[ 100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[ 100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[ 100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[ 100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[ 100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62
We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Handle case when module is unloaded (kfd_exit) before a process space
(mm_struct) is released.
v2: Fixed potential race conditions by removing all kfd_process from
the process table first, then working on releasing the resources.
v3: Fixed loop element access / synchronization. Fixed extra empty lines.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.
[How]
Restore the link connection type if it fails to read DPCD register.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to
change, as signal is detected as a virtual signal on hot unplug. Writing
these values to OTG_PIXEL_RATE_DIV register might cause primary display
to blank (known hw bug).
[HOW]
No longer write k1 and k2 values to register if signal is virtual, we
have safe guards in place in the case that k1 and k2 is unassigned so
that an unknown value is not written to the register either.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCN firmware loading path enables the indirect SRAM mode if it's
advertised as supported. We might have some cases of FW issues that
prevents this mode to working properly though, ending-up in a failed
probe. An example below, observed in the Steam Deck:
[...]
[drm] failed to load ucode VCN0_RAM(0x3A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0000)
amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_dec_0 test failed (-110)
[drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <vcn_v3_0> failed -110
amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_init failed
amdgpu 0000:04:00.0: amdgpu: Fatal error during GPU init
[...]
Disabling the VCN block circumvents this, but it's a very invasive
workaround that turns off the entire feature. So, let's add a quirk
on VCN loading that checks for known problematic BIOSes on Vangogh,
so we can proactively disable the indirect SRAM mode and allow the
HW proper probe and VCN IP block to work fine.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2385
Fixes: 82132ecc54 ("drm/amdgpu: enable Vangogh VCN indirect sram mode")
Cc: stable@vger.kernel.org
Cc: James Zhu <James.Zhu@amd.com>
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does
not use the counter i. This causes the fill_dc_dity_rect() to always
fill dirty_rects[0], causing graphical artifacts when a damage clip
aware DRM client sends more than 1 damage clip.
Instead, use the flip_addrs->dirty_rect_count which is incremented by
fill_dc_dirty_rect() on a successful fill.
Fixes: 30ebe41582 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453
Signed-off-by: Benjamin Cheng <ben@bcheng.me>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Some amd asics having reliable hotplug support don't call
drm_kms_helper_poll_init in driver init sequence. However,
due to the unified suspend/resume path for all asics, because
the output_poll_work->func is not set for these asics, a warning
arrives when suspending.
[ 90.656049] <TASK>
[ 90.656050] ? console_unlock+0x4d/0x100
[ 90.656053] ? __irq_work_queue_local+0x27/0x60
[ 90.656056] ? irq_work_queue+0x2b/0x50
[ 90.656057] ? __wake_up_klogd+0x40/0x60
[ 90.656059] __cancel_work_timer+0xed/0x180
[ 90.656061] drm_kms_helper_poll_disable.cold+0x1f/0x2c [drm_kms_helper]
[ 90.656072] amdgpu_device_suspend+0x81/0x170 [amdgpu]
[ 90.656180] amdgpu_pmops_runtime_suspend+0xb5/0x1b0 [amdgpu]
[ 90.656269] pci_pm_runtime_suspend+0x61/0x1b0
drm_kms_helper_poll_enable/disable is valid when poll_init is called in
amdgpu code, which is only used in non DC path. So move such codes into
non-DC path code to get rid of such warnings.
v1: introduce use_kms_poll flag in amdgpu as the poll stuff check
v2: use dc_enabled as the flag to simply code
v3: move code into non DC path instead of relying on any flag
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2411
Fixes: a4e771729a ("drm/probe_helper: sort out poll_running vs poll_enabled")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
On resume some displays are not ready for HDCP, so they will fail if we
start the hdcp authentintication too soon.
Add a delay so that the displays can be ready before we start.
NOTE: Previoulsy this delay was set to 3 seconds but it was causing
issues with compliance, 2 seconds should enough for compliance and the
s3 resume case.
[How]
Change the Delay to 2 seconds.
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kgd_mem pointers returned by kfd_process_device_translate_handle are
only guaranteed to be valid while p->mutex is held. As soon as the mutex
is unlocked, another thread can free the BO.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always setup overdrive tables after resume. Preserve only some
user-defined settings in user_overdrive_table if they're set.
Copy restored user_overdrive_table into od_table to get correct
values.
On cold boot, BTC was triggered and GfxVfCurve was calibrated. We
got VfCurve settings (a). On resuming back, BTC will be triggered
again and GfxVfCurve will be recalibrated. VfCurve settings (b)
got may be different from those of cold boot. So if we reuse
those VfCurve settings (a) got on cold boot on suspend, we can
run into discrepencies.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1897
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2276
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Błażej Szczygieł <mumei6102@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
During miration to vram prange->offset is valid after vram buffer is located,
either use old one or allocate a new one. Move svm_range_vram_node_new before
migrate for each vma to get valid prange->offset.
v2: squash in warning fix
Fixes: b4ee960637 ("drm/amdkfd: Fix BO offset for multi-VMA page migration")
Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_migrate_ram_to_vram migrates a prange from sys ram to vram. The prange may
cross multiple vma. Need remember current dst vram offset in the TTM resource for
each migration.
v2: squash in warning fix (Alex)
Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, the clk manager matches SocVoltage with voltage from
fused settings (dfPstate clock table). And then corresponding clocks
are selected.
However in certain situations, this leads to clk manager not
including at least one entry with highest supported clock setting.
[How]
Update the clk manager to include at least one entry with highest
supported clock setting.
Reviewed-by: Pavle Kotarac <pavle.kotarac@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't need to query error count and error address on harvest umc nodes.
v2: Fix code bug, use active_mask instead of harvsest_config
and remove unnecessary argument in LOOP macro.
v3: Leave adev->gmc.num_umc unchanged.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Dave Airlie:
"fbdev:
- fix uninit var in error path
shmem:
- revert unGPLing an export
i915:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices
amdkfd:
- SDMA fix
- Illegal memory access fix"
* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
drm/amdgpu/vcn: fix compilation issue with legacy gcc
drm/amd/display: Extend Freesync over PCon support for more devices
Revert "drm/amd/display: Do not set DRR on pipe commit"
drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
drm/amd/display: Ext displays with dock can't recognized after resume
drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
drm/amdgpu: remove unused variable ring
drm/amd/display: fix dm irq error message in gpu recover
drm/amd: Fix initialization for nbio 7.5.1
drm/amd/display: Don't restrict bpc to 8 bpc
drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
drm/radeon: Fix eDP for single-display iMac11,2
drm/shmem-helper: Revert accidental non-GPL export
drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
drm/amd/pm: downgrade log level upon SMU IF version mismatch
drm/amdgpu: Add ecc info query interface for umc v8_10
drm/amdgpu: Add convert_error_address function for umc v8_10
drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
drm/amdgpu: change default behavior of bad_page_threshold parameter
drm/amdgpu: exclude duplicate pages from UMC RAS UE count
...
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.
[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:
shift exponent 4294966273 is too large for 32-bit type 'int'
[HOW]
In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
‘ring’ set but not used [-Werror=unused-but-set-variable]
81 | struct amdgpu_ring *ring;
| ^~~~
ring is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
[How]
Defer the initialization of num_types to eliminate the error logs.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
