Add test cases for VXLAN MDB, testing the control and data paths. Two
different sets of namespaces (i.e., ns{1,2}_v4 and ns{1,2}_v6) are used
in order to test VXLAN MDB with both IPv4 and IPv6 underlays,
respectively.
Example truncated output:
# ./test_vxlan_mdb.sh
[...]
Tests passed: 620
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new network selftests for the bonding device which exercise the ether
type changing call paths. They also test for the recent syzbot bug[1] which
causes a warning and results in wrong device flags (IFF_SLAVE missing).
The test adds three bond devices and a nlmon device, enslaves one of the
bond devices to the other and then uses the nlmon device for successful
and unsuccesful enslaves both of which change the bond ether type. Thus
we can test for both MASTER and SLAVE flags at the same time.
If the flags are properly restored we get:
TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ]
TEST: Change ether type of an enslaved bond device with successful enslave [ OK ]
[1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei noticed xdp_do_redirect test on BPF CI started failing on
BE systems after skb PP recycling was enabled:
test_xdp_do_redirect:PASS:prog_run 0 nsec
test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec
test_xdp_do_redirect:PASS:pkt_count_zero 0 nsec
test_xdp_do_redirect:FAIL:pkt_count_tc unexpected pkt_count_tc: actual
220 != expected 9998
test_max_pkt_size:PASS:prog_run_max_size 0 nsec
test_max_pkt_size:PASS:prog_run_too_big 0 nsec
close_netns:PASS:setns 0 nsec
#289 xdp_do_redirect:FAIL
Summary: 270/1674 PASSED, 30 SKIPPED, 1 FAILED
and it doesn't happen on LE systems.
Ilya then hunted it down to:
#0 0x0000000000aaeee6 in neigh_hh_output (hh=0x83258df0,
skb=0x88142200) at linux/include/net/neighbour.h:503
#1 0x0000000000ab2cda in neigh_output (skip_cache=false,
skb=0x88142200, n=<optimized out>) at linux/include/net/neighbour.h:544
#2 ip6_finish_output2 (net=net@entry=0x88edba00, sk=sk@entry=0x0,
skb=skb@entry=0x88142200) at linux/net/ipv6/ip6_output.c:134
#3 0x0000000000ab4cbc in __ip6_finish_output (skb=0x88142200, sk=0x0,
net=0x88edba00) at linux/net/ipv6/ip6_output.c:195
#4 ip6_finish_output (net=0x88edba00, sk=0x0, skb=0x88142200) at
linux/net/ipv6/ip6_output.c:206
xdp_do_redirect test places a u32 marker (0x42) right before the Ethernet
header to check it then in the XDP program and return %XDP_ABORTED if it's
not there. Neigh xmit code likes to round up hard header length to speed
up copying the header, so it overwrites two bytes in front of the Eth
header. On LE systems, 0x42 is one byte at `data - 4`, while on BE it's
`data - 1`, what explains why it happens only there.
It didn't happen previously due to that %XDP_PASS meant the page will be
discarded and replaced by a new one, but now it can be recycled as well,
while bpf_test_run code doesn't reinitialize the content of recycled
pages. This mark is limited to this particular test and its setup though,
so there's no need to predict 1000 different possible cases. Just move
it 4 bytes to the left, still keeping it 32 bit to match on more bytes.
Fixes: 9c94bbf9a8 ("xdp: recycle Page Pool backed skbs built from XDP frames")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/CAADnVQ+B_JOU+EpP=DKhbY9yXdN6GiRPnpTTXfEZ9sNkUeb-yQ@mail.gmail.com
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> # + debugging
Link: https://lore.kernel.org/bpf/8341c1d9f935f410438e79d3bd8a9cc50aefe105.camel@linux.ibm.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230316175051.922550-3-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The `devlink -j port show` command output may not contain the "flavour"
key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with
mlx4 driver and iproute2-5.15.0:
{"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"},
"pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"},
"pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"},
"pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}}
This will cause a KeyError exception.
Create a validate_devlink_output() to check for this "flavour" from
devlink command output to avoid this KeyError exception. Also let
it handle the check for `devlink -j dev show` output in main().
Apart from this, if the test was not started because the max lanes of
the designated device is 0. The script will still return 0 and thus
causing a false-negative test result.
Use a found_max_lanes flag to determine if these tests were skipped
due to this reason and return KSFT_SKIP to make it more clear.
Link: https://bugs.launchpad.net/bugs/1937133
Fixes: f3348a82e7 ("selftests: net: Add port split test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20230315165353.229590-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default do not allow to enable both LAM and use SVA in the same
process.
The new ARCH_FORCE_TAGGED_SVA arch_prctl() overrides the limitation.
Add new test cases for the new arch_prctl:
Before using ARCH_FORCE_TAGGED_SVA, should not allow to enable LAM/SVA
coexisting. the test cases should be negative.
The test depands on idxd driver and iommu. before test, need add
"intel_iommu=on,sm_on" in kernel command line and insmod idxd driver.
Signed-off-by: Weihong Zhang <weihong.zhang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230312112612.31869-17-kirill.shutemov%40linux.intel.com
LAM is enabled per-thread and gets inherited on fork(2)/clone(2). exec()
reverts LAM status to the default disabled state.
There are two test scenarios:
- Fork test cases:
These cases were used to test the inheritance of LAM for per-thread,
Child process generated by fork() should inherit LAM feature from
parent process, Child process can get the LAM mode same as parent
process.
- Execve test cases:
Processes generated by execve() are different from processes
generated by fork(), these processes revert LAM status to disabled
status.
Signed-off-by: Weihong Zhang <weihong.zhang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230312112612.31869-16-kirill.shutemov%40linux.intel.com
Add mmap and SYSCALL test cases.
SYSCALL test cases:
- LAM supports set metadata in high bits 62:57 (LAM_U57) of a user pointer, pass
the pointer to SYSCALL, SYSCALL can dereference the pointer and return correct
result.
- Disable LAM, pass a pointer with metadata in high bits to SYSCALL,
SYSCALL returns -1 (EFAULT).
MMAP test cases:
- Enable LAM_U57, MMAP with low address (below bits 47), set metadata
in high bits of the address, dereference the address should be
allowed.
- Enable LAM_U57, MMAP with high address (above bits 47), set metadata
in high bits of the address, dereference the address should be
allowed.
Signed-off-by: Weihong Zhang <weihong.zhang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230312112612.31869-14-kirill.shutemov%40linux.intel.com
LAM is supported only in 64-bit mode and applies only addresses used for data
accesses. In 64-bit mode, linear address have 64 bits. LAM is applied to 64-bit
linear address and allow software to use high bits for metadata.
LAM supports configurations that differ regarding which pointer bits are masked
and can be used for metadata.
LAM includes following mode:
- LAM_U57, pointer bits in positions 62:57 are masked (LAM width 6),
allows bits 62:57 of a user pointer to be used as metadata.
There are some arch_prctls:
ARCH_ENABLE_TAGGED_ADDR: enable LAM mode, mask high bits of a user pointer.
ARCH_GET_UNTAG_MASK: get current untagged mask.
ARCH_GET_MAX_TAG_BITS: the maximum tag bits user can request. zero if LAM
is not supported.
The LAM mode is for pre-process, a process has only one chance to set LAM mode.
But there is no API to disable LAM mode. So all of test cases are run under
child process.
Functions of this test:
MALLOC
- LAM_U57 masks bits 57:62 of a user pointer. Process on user space
can dereference such pointers.
- Disable LAM, dereference a pointer with metadata above 48 bit or 57 bit
lead to trigger SIGSEGV.
TAG_BITS
- Max tag bits of LAM_U57 is 6.
Signed-off-by: Weihong Zhang <weihong.zhang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230312112612.31869-13-kirill.shutemov%40linux.intel.com
Now that struct bpf_cpumask is RCU safe, there's no need for this kfunc.
Rather than doing the following:
private(MASK) static struct bpf_cpumask __kptr *global;
int BPF_PROG(prog, s32 cpu, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = bpf_cpumask_kptr_get(&global);
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_cpumask_release(cpumask);
bpf_rcu_read_unlock();
}
Programs can instead simply do (assume same global cpumask):
int BPF_PROG(prog, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = global;
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_rcu_read_unlock();
}
In other words, no extra atomic acquire / release, and less boilerplate
code.
This patch removes both the kfunc, as well as its selftests and
documentation.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that struct bpf_cpumask * is considered an RCU-safe type according
to the verifier, we should add tests that validate its common usages.
This patch adds those tests to the cpumask test suite. A subsequent
changes will remove bpf_cpumask_kptr_get(), and will adjust the selftest
and BPF documentation accordingly.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Address a rather annoying bug w.r.t. guest timer offsetting. The
synchronization of timer offsets between vCPUs was broken, leading
to inconsistent timer reads within the VM.
x86:
- New tests for the slow path of the EVTCHNOP_send Xen hypercall
- Add missing nVMX consistency checks for CR0 and CR4
- Fix bug that broke AMD GATag on 512 vCPU machines
Selftests:
- Skip hugetlb tests if huge pages are not available
- Sync KVM exit reasons"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Sync KVM exit reasons in selftests
KVM: selftests: Add macro to generate KVM exit reason strings
KVM: selftests: Print expected and actual exit reason in KVM exit reason assert
KVM: selftests: Make vCPU exit reason test assertion common
KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_test
KVM: selftests: Use enum for test numbers in xen_shinfo_test
KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercalls
KVM: selftests: Move the guts of kvm_hypercall() to a separate macro
KVM: SVM: WARN if GATag generation drops VM or vCPU ID information
KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUs
KVM: SVM: Fix a benign off-by-one bug in AVIC physical table mask
selftests: KVM: skip hugetlb tests if huge pages are not available
KVM: VMX: Use tabs instead of spaces for indentation
KVM: VMX: Fix indentation coding style issue
KVM: nVMX: remove unnecessary #ifdef
KVM: nVMX: add missing consistency checks for CR0 and CR4
KVM: arm64: timers: Convert per-vcpu virtual offset to a global value
This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case.
It tries to read data to NULL buffer (data already presents in socket's
queue), then uses valid buffer. For SOCK_STREAM second read must return
data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will
be dropped by kernel, and 'recv()' will return EAGAIN.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a new test that tries to attach a program to fentry of two
functions of the same name, one located in vmlinux and the other in
bpf_testmod.
To avoid conflicts with existing tests, a new function
"bpf_fentry_shadow_test" was created both in vmlinux and in bpf_testmod.
The previous commit fixed a bug which caused this test to fail. The
verifier would always use the vmlinux function's address as the target
trampoline address, hence trying to create two trampolines for a single
address, which is forbidden.
The test (similarly to other fentry/fexit tests) is not working on arm64
at the moment.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/5fe2f364190b6f79b085066ed7c5989c5bc475fa.1678432753.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull kselftest fixes from Shuah Khan:
"A fix to amd-pstate test Makefile and a fix to LLVM build for x86 in
kselftest common lib.mk"
* tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix LLVM build for i386 and x86_64
selftests: amd-pstate: fix TEST_FILES
The test checks if (IPv4, IPv6) address pair properly conflict or not.
* IPv4
* 0.0.0.0
* 127.0.0.1
* IPv6
* ::
* ::1
If the IPv6 address is [::], the second bind() always fails.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LLVM commit https://reviews.llvm.org/D143726 introduced hoistMinMax optimization
that transformed
(i < VIRTIO_MAX_SGS) && (i < out_sgs)
into
i < MIN(VIRTIO_MAX_SGS, out_sgs)
and caused the verifier to stop recognizing such loop as bounded.
Which resulted in the following test failure:
libbpf: prog 'trace_virtqueue_add_sgs': BPF program load failed: Bad address
libbpf: prog 'trace_virtqueue_add_sgs': -- BEGIN PROG LOAD LOG --
The sequence of 8193 jumps is too complex.
verification time 789206 usec
stack depth 56
processed 156446 insns (limit 1000000) max_states_per_insn 7 total_states 1746 peak_states 1701 mark_read 12
-- END PROG LOAD LOG --
libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -14
libbpf: failed to load object 'loop6.bpf.o'
Workaround the verifier limitation for now with inline asm that
prevents this particular optimization.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the test relies on that only dropped ("xmitted") frames will
be recycled and if a frame became an skb, it will be freed later by the
stack and never come back to its page_pool.
So, it easily gets broken by trying to recycle skbs[0]:
test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec
test_xdp_do_redirect:FAIL:pkt_count_zero unexpected pkt_count_zero:
actual 9936 != expected 2
test_xdp_do_redirect:PASS:pkt_count_tc 0 nsec
That huge mismatch happened because after the TC ingress hook zeroes the
magic, the page gets recycled when skb is freed, not returned to the MM
layer. "Live frames" mode initializes only new pages and keeps the
recycled ones as is by design, so they appear with zeroed magic on the
Rx path again.
Expand the possible magic values from two: 0 (was "xmitted"/dropped or
did hit the TC hook) and 0x42 (hit the input XDP prog) to three: the new
one will mark frames hit the TC hook, so that they will elide both
@pkt_count_zero and @pkt_count_xdp. They can then be recycled to their
page_pool or returned to the page allocator, this won't affect the
counters anyhow. Just make sure to mark them as "input" (0x42) when they
appear on the Rx path again.
Also make an enum from those magics, so that they will be always visible
and can be changed in just one place anytime. This also eases adding any
new marks later on.
Link: https://github.com/kernel-patches/bpf/actions/runs/4386538411/jobs/7681081789
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-2-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The xen_shinfo_test started off with very few iterations, and the numbers
we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values
anyway to start with.
It has since grown quite a few more tests, and it's kind of awful to be
handling them all as bare numbers. Especially when I want to add a new
test in the middle. Define an enum for the test stages, and use it both
in the guest code and the host switch statement.
No functional change, if I can count to 24.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls,
which have a different register ABI, can reuse the VMCALL vs. VMMCALL
logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is
not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0)
the test will fail with a memory allocation error.
This makes it impossible to add tests that default to hugetlb-backed memory,
because on a machine with a default configuration they will fail. Therefore,
check HugePages_Total as well and, if zero, direct the user to enable hugepages
in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On the max config P10 machine (1920 threads and 64TB) this test fails
with a timeout:
Sending signals to all threads 10 times...!! killing vmx_signal
!! child died by signal 15
failure: vmx_signal
The default timeout is 120sec so increase this 3x to 360sec. With this
change the test passes on these large machines.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230307213614.2652059-1-mikey@neuling.org
The canonical location for the tracefs filesystem is at
/sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many tests in the bpf selftest code still refer to this older debugfs
path, so let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-3-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests that check if filters can bind actions, that is create an
action independently and then bind to a filter.
tdc-tests under category 'infra':
1..18
ok 1 abdc - Reference pedit action object in filter
ok 2 7a70 - Reference mpls action object in filter
ok 3 d241 - Reference bpf action object in filter
ok 4 383a - Reference connmark action object in filter
ok 5 c619 - Reference csum action object in filter
ok 6 a93d - Reference ct action object in filter
ok 7 8bb5 - Reference ctinfo action object in filter
ok 8 2241 - Reference gact action object in filter
ok 9 35e9 - Reference gate action object in filter
ok 10 b22e - Reference ife action object in filter
ok 11 ef74 - Reference mirred action object in filter
ok 12 2c81 - Reference nat action object in filter
ok 13 ac9d - Reference police action object in filter
ok 14 68be - Reference sample action object in filter
ok 15 cf01 - Reference skbedit action object in filter
ok 16 c109 - Reference skbmod action object in filter
ok 17 4abc - Reference tunnel_key action object in filter
ok 18 dadd - Reference vlan action object in filter
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230309175554.304824-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge commit bf9bec4cb3 ("Merge branch 'bpf: Allow reads from uninit stack'")
from bpf-next to bpf tree to address verification issues in some programs
due to stack usage.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
This commit tests the "tsc=watchdog" kernel boot parameter when running
the clocksourcewd torture tests.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Currently, invoking kvm-again.sh without a --duration argument results
in a bash error message. This commit therefore adds quotes around the
$dur argument to kvm-transform.sh to allow a default duration to be
taken from the earlier run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit enables the RCU_LAZY Kconfig option in scenario TREE04 in
order to provide some ongoing testing of this configuration.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
There is now a BOOTPARAM_HOTPLUG_CPU0 Kconfig option that allows CPU 0
to be offlined on x86 systems. This commit therefore sets this option in
the TREE01 rcutorture scenario in order to regularly test this capability.
Reported-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In case of errors, the printed message had the expected and the seen
value inverted.
This patch simply correct the order: first the expected value, then the
one that has been seen.
Fixes: 10d4273411 ("selftests: mptcp: userspace: print error details if any")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new selftest, local_kptr_stash, which uses bpf_kptr_xchg to stash
a bpf_obj_new-allocated object in a map. Test the following scenarios:
* Stash two rb_nodes in an arraymap, don't unstash them, rely on map
free to destruct them
* Stash two rb_nodes in an arraymap, unstash the second one in a
separate program, rely on map free to destruct first
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following build error can be seen:
progs/test_deny_namespace.c:22:19: error: call to undeclared function 'BIT_LL'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
__u64 cap_mask = BIT_LL(CAP_SYS_ADMIN);
The struct kernel_cap_struct no longer exists in the kernel as well.
Adjust bpf prog to fix both issues.
Fixes: f122a08b19 ("capability: just use a 'u64' instead of a 'u32[2]' array")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The commit 11e456cae9 ("selftests/bpf: Fix compilation errors: Assign a value to a constant")
fixed the issue cleanly in bpf-next.
This is an alternative fix in bpf tree to avoid merge conflict between bpf and bpf-next.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tests how many kmallocs is needed to create and free
a batch of UDP sockets and each socket has a 64bytes bpf storage.
It also measures how fast the UDP sockets can be created.
The result is from my qemu setup.
Before bpf_mem_cache_alloc/free:
./bench -p 1 local-storage-create
Setting up benchmark 'local-storage-create'...
Benchmark 'local-storage-create' started.
Iter 0 ( 73.193us): creates 213.552k/s (213.552k/prod), 3.09 kmallocs/create
Iter 1 (-20.724us): creates 211.908k/s (211.908k/prod), 3.09 kmallocs/create
Iter 2 ( 9.280us): creates 212.574k/s (212.574k/prod), 3.12 kmallocs/create
Iter 3 ( 11.039us): creates 213.209k/s (213.209k/prod), 3.12 kmallocs/create
Iter 4 (-11.411us): creates 213.351k/s (213.351k/prod), 3.12 kmallocs/create
Iter 5 ( -7.915us): creates 214.754k/s (214.754k/prod), 3.12 kmallocs/create
Iter 6 ( 11.317us): creates 210.942k/s (210.942k/prod), 3.12 kmallocs/create
Summary: creates 212.789 ± 1.310k/s (212.789k/prod), 3.12 kmallocs/create
After bpf_mem_cache_alloc/free:
./bench -p 1 local-storage-create
Setting up benchmark 'local-storage-create'...
Benchmark 'local-storage-create' started.
Iter 0 ( 68.265us): creates 243.984k/s (243.984k/prod), 1.04 kmallocs/create
Iter 1 ( 30.357us): creates 238.424k/s (238.424k/prod), 1.04 kmallocs/create
Iter 2 (-18.712us): creates 232.963k/s (232.963k/prod), 1.04 kmallocs/create
Iter 3 (-15.885us): creates 238.879k/s (238.879k/prod), 1.04 kmallocs/create
Iter 4 ( 5.590us): creates 237.490k/s (237.490k/prod), 1.04 kmallocs/create
Iter 5 ( 8.577us): creates 237.521k/s (237.521k/prod), 1.04 kmallocs/create
Iter 6 ( -6.263us): creates 238.508k/s (238.508k/prod), 1.04 kmallocs/create
Summary: creates 237.298 ± 2.198k/s (237.298k/prod), 1.04 kmallocs/create
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-18-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tweats the socket_bind bpf prog to test the
local_storage->smap == NULL case in the bpf_local_storage_free()
code path. The idea is to create the local_storage with
the sk_storage_map's selem first. Then add the sk_storage_map2's selem
and then delete the earlier sk_storeage_map's selem.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-17-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The send_signal tracepoint tests are non-deterministically failing in
CI. The test works as follows:
1. Two pairs of file descriptors are created using the pipe() function.
One pair is used to communicate between a parent process -> child
process, and the other for the reverse direction.
2. A child is fork()'ed. The child process registers a signal handler,
notifies its parent that the signal handler is registered, and then
and waits for its parent to have enabled a BPF program that sends a
signal.
3. The parent opens and loads a BPF skeleton with programs that send
signals to the child process. The different programs are triggered by
different perf events (either NMI or normal perf), or by regular
tracepoints. The signal is delivered to the child whenever the child
triggers the program.
4. The child's signal handler is invoked, which sets a flag saying that
the signal handler was reached. The child then signals to the parent
that it received the signal, and the test ends.
The perf testcases (send_signal_perf{_thread} and
send_signal_nmi{_thread}) work 100% of the time, but the tracepoint
testcases fail non-deterministically because the tracepoint is not
always being fired for the child.
There are two tracepoint programs registered in the test:
'tracepoint/sched/sched_switch', and
'tracepoint/syscalls/sys_enter_nanosleep'. The child never intentionally
blocks, nor sleeps, so neither tracepoint is guaranteed to be triggered.
To fix this, we can have the child trigger the nanosleep program with a
usleep().
Before this patch, the test would fail locally every 2-3 runs. Now, it
doesn't fail after more than 1000 runs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230310061909.1420887-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
