Some block device integrity parameters are available in sysfs, but
others are only accessible using the FS_IOC_GETLBMD_CAP ioctl. Add a
metadata_size utility program to print out the logical block metadata
size, PI offset, and PI size within the metadata. Example output:
$ metadata_size /dev/ublkb0
metadata_size: 64
pi_offset: 56
pi_tuple_size: 8
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for printing the UBLK_F_INTEGRITY feature flag in the
human-readable kublk features output.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in fixes that went to 6.19 after for-7.0/block was branched.
Pending ublk changes depend on particularly the async scan work.
* block-6.19:
block: zero non-PI portion of auto integrity buffer
ublk: fix use-after-free in ublk_partition_scan_work
blk-mq: avoid stall during boot due to synchronize_rcu_expedited
loop: add missing bd_abort_claiming in loop_set_status
block: don't merge bios with different app_tags
blk-rq-qos: Remove unlikely() hints from QoS checks
loop: don't change loop device under exclusive opener in loop_set_status
block, bfq: update outdated comment
blk-mq: skip CPU offline notify on unmapped hctx
selftests/ublk: fix Makefile to rebuild on header changes
selftests/ublk: add test for async partition scan
ublk: scan partition in async way
block,bfq: fix aux stat accumulation destination
md: Fix forward incompatibility from configurable logical block size
md: Fix logical_block_size configuration being overwritten
md: suspend array while updating raid_disks via sysfs
md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt()
md: Fix static checker warning in analyze_sbs
Add header dependencies to kublk build rule so that changes to
kublk.h, ublk_dep.h, or utils.h trigger a rebuild.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test_generic_15.sh to verify that async partition scan prevents
IO hang when reading partition tables.
The test creates ublk devices with fault_inject target and very large
delay (60s) to simulate blocked partition table reads, then kills the
daemon to verify proper state transitions without hanging:
1. Without recovery support:
- Create device with fault_inject and 60s delay
- Kill daemon while partition scan may be blocked
- Verify device transitions to DEAD state
2. With recovery support (-r 1):
- Create device with fault_inject, 60s delay, and recovery
- Kill daemon while partition scan may be blocked
- Verify device transitions to QUIESCED state
Before the async partition scan fix, killing the daemon during
partition scan would cause deadlock as partition scan held ub->mutex
while waiting for IO. With the async fix, partition scan happens in
a work function and flush_work() ensures proper synchronization.
Add _add_ublk_dev_no_settle() helper function to skip udevadm settle,
which would otherwise hang waiting for partition scan events to
complete when partition table read is delayed.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull arm64 fixes from Catalin Marinas:
"Two left-over updates that could not go into -rc1 due to conflicts
with other series:
- Simplify checks in arch_kfence_init_pool() since
force_pte_mapping() already takes BBML2-noabort (break-before-make
Level 2 with no aborts generated) into account
- Remove unneeded SVE/SME fallback preserve/store handling in the
arm64 EFI. With the recent updates, the fallback path is only taken
for EFI runtime calls from hardirq or NMI contexts. In practice,
this only happens under panic/oops/emergency_restart() and no
restoring of the user state expected.
There's a corresponding lkdtm update to trigger a BUG() or panic()
from hardirq context together with a fixup not to confuse
clang/objtool about the control flow
GCS (guarded control stacks) fix: flush the GCS locking state on exec,
otherwise the new task will not be able to enable GCS (locked as
disabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
lkdtm/bugs: Do not confuse the clang/objtool with busy wait loop
arm64/gcs: Flush the GCS locking state on exec
arm64/efi: Remove unneeded SVE/SME fallback preserve/store handling
lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context
arm64: mm: Simplify check in arch_kfence_init_pool()
Pull x86 kvm fixes from Paolo Bonzini:
"x86 fixes. Everyone else is already in holiday mood apparently.
- Add a missing 'break' to fix param parsing in the rseq selftest
- Apply runtime updates to the _current_ CPUID when userspace is
setting CPUID, e.g. as part of vCPU hotplug, to fix a false
positive and to avoid dropping the pending update
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as
it's not supported by KVM and leads to a use-after-free due to KVM
failing to unbind the memslot from the previously-associated
guest_memfd instance
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for
supporting flags-only changes on KVM_MEM_GUEST_MEMFD memlslots,
e.g. for dirty logging
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is
defined as -1ull (a 64-bit value)
- Update SVI when activating APICv to fix a bug where a
post-activation EOI for an in-service IRQ would effective be lost
due to SVI being stale
- Immediately refresh APICv controls (if necessary) on a nested
VM-Exit instead of deferring the update via KVM_REQ_APICV_UPDATE,
as the request is effectively ignored because KVM thinks the vCPU
already has the correct APICv settings"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Immediately refresh APICv controls as needed on nested VM-Exit
KVM: VMX: Update SVI during runtime APICv activation
KVM: nSVM: Set exit_code_hi to -1 when synthesizing SVM_EXIT_ERR (failed VMRUN)
KVM: nSVM: Clear exit_code_hi in VMCB when synthesizing nested VM-Exits
KVM: Harden and prepare for modifying existing guest_memfd memslots
KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot
KVM: selftests: Add a CPUID testcase for KVM_SET_CPUID2 with runtime updates
KVM: x86: Apply runtime updates to current CPUID during KVM_SET_CPUID{,2}
KVM: selftests: Add missing "break" in rseq_test's param parsing
Pull block fixes from Jens Axboe:
- ublk selftests for missing coverage
- two fixes for the block integrity code
- fix for the newly added newly added PR read keys ioctl, limiting the
memory that can be allocated
- work around for a deadlock that can occur with ublk, where partition
scanning ends up recursing back into file closure, which needs the
same mutex grabbed. Not the prettiest thing in the world, but an
acceptable work-around until we can eliminate the reliance on
disk->open_mutex for this
- fix for a race between enabling writeback throttling and new IO
submissions
- move a bit of bio flag handling code. No changes, but needed for a
patchset for a future kernel
- fix for an init time id leak failure in rnbd
- loop/zloop state check fix
* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: validate interval_exp integrity limit
block: validate pi_offset integrity limit
block: rnbd-clt: Fix leaked ID in init_dev()
ublk: fix deadlock when reading partition table
block: add allocation size check in blkdev_pr_read_keys()
Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
loop: use READ_ONCE() to read lo->lo_state without locking
block: fix race between wbt_enable_default and IO submission
selftests: ublk: add user copy test cases
selftests: ublk: add support for user copy to kublk
selftests: ublk: forbid multiple data copy modes
selftests: ublk: don't share backing files between ublk servers
selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
selftests: ublk: fix fio arguments in run_io_and_recover()
selftests: ublk: remove unused ios map in seq_io.bt
selftests: ublk: correct last_rw map type in seq_io.bt
selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
block: move around bio flagging helpers
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
KVM fixes for 6.19-rc1
- Add a missing "break" to fix param parsing in the rseq selftest.
- Apply runtime updates to the _current_ CPUID when userspace is setting
CPUID, e.g. as part of vCPU hotplug, to fix a false positive and to avoid
dropping the pending update.
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as it's not
supported by KVM and leads to a use-after-free due to KVM failing to unbind
the memslot from the previously-associated guest_memfd instance.
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for supporting
flags-only changes on KVM_MEM_GUEST_MEMFD memlslots, e.g. for dirty logging.
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is defined
as -1ull (a 64-bit value).
- Update SVI when activating APICv to fix a bug where a post-activation EOI
for an in-service IRQ would effective be lost due to SVI being stale.
- Immediately refresh APICv controls (if necessary) on a nested VM-Exit
instead of deferring the update via KVM_REQ_APICV_UPDATE, as the request is
effectively ignored because KVM thinks the vCPU already has the correct
APICv settings.
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF builds due to -fms-extensions. selftests (Alexei
Starovoitov), bpftool (Quentin Monnet).
- Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n
(Geert Uytterhoeven)
- Fix livepatch/BPF interaction and support reliable unwinding through
BPF stack frames (Josh Poimboeuf)
- Do not audit capability check in arm64 JIT (Ondrej Mosnacek)
- Fix truncated dmabuf BPF iterator reads (T.J. Mercier)
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
Pull sched_ext fixes from Tejun Heo:
- Fix memory leak when destroying helper kthread workers during
scheduler disable
- Fix bypass depth accounting on scx_enable() failure which could leave
the system permanently in bypass mode
- Fix missing preemption handling when moving tasks to local DSQs via
scx_bpf_dsq_move()
- Misc fixes including NULL check for put_prev_task(), flushing stdout
in selftests, and removing unused code
* tag 'sched_ext-for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove unused code in the do_pick_task_scx()
selftests/sched_ext: flush stdout before test to avoid log spam
sched_ext: Fix missing post-enqueue handling in move_local_task_to_local_dsq()
sched_ext: Factor out local_dsq_post_enq() from dispatch_enqueue()
sched_ext: Fix bypass depth leak on scx_enable() failure
sched/ext: Avoid null ptr traversal when ->put_prev_task() is called with NULL next
sched_ext: Fix the memleak for sch->helper objects
GCC gets a bit confused and reports:
In function '_test_cmd_get_hw_info',
inlined from 'iommufd_ioas_get_hw_info' at iommufd.c:779:3,
inlined from 'wrapper_iommufd_ioas_get_hw_info' at iommufd.c:752:1:
>> iommufd_utils.h:804:37: warning: array subscript 'struct iommu_test_hw_info[0]' is partly outside array bounds of 'struct iommu_test_hw_info_buffer_smaller[1]' [-Warray-bounds=]
804 | assert(!info->flags);
| ~~~~^~~~~~~
iommufd.c: In function 'wrapper_iommufd_ioas_get_hw_info':
iommufd.c:761:11: note: object 'buffer_smaller' of size 4
761 | } buffer_smaller;
| ^~~~~~~~~~~~~~
While it is true that "struct iommu_test_hw_info[0]" is partly out of
bounds of the input pointer, it is not true that info->flags is out of
bounds. Unclear why it warns on this.
Reuse an existing properly sized stack buffer and pass a truncated length
instead to test the same thing.
Fixes: af4fde93c3 ("iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl")
Link: https://patch.msgid.link/r/0-v1-63a2cffb09da+4486-iommufd_gcc_bounds_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512032344.kaAcKFIM-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add lkdtm cases to trigger a BUG() or panic() from hardirq context. This
is useful for testing pstore behavior being invoked from such contexts.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ublk selftests cover every data copy mode except user copy. Add
tests for user copy based on the existing test suite:
- generic_14 ("basic recover function verification (user copy)") based
on generic_04 and generic_05
- null_03 ("basic IO test with user copy") based on null_01 and null_02
- loop_06 ("write and verify over user copy") based on loop_01 and
loop_03
- loop_07 ("mkfs & mount & umount with user copy") based on loop_02 and
loop_04
- stripe_05 ("write and verify test on user copy") based on stripe_03
- stripe_06 ("mkfs & mount & umount on user copy") based on stripe_02
and stripe_04
- stress_06 ("run IO and remove device (user copy)") based on stress_01
and stress_03
- stress_07 ("run IO and kill ublk server (user copy)") based on
stress_02 and stress_04
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ublk selftests mock ublk server kublk supports every data copy mode
except user copy. Add support for user copy to kublk, enabled via the
--user_copy (-u) command line argument. On writes, issue pread() calls
to copy the write data into the ublk_io's buffer before dispatching the
write to the target implementation. On reads, issue pwrite() calls to
copy read data from the ublk_io's buffer before committing the request.
Copy in 2 KB chunks to provide some coverage of the offseting logic.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kublk mock ublk server allows multiple data copy mode arguments to
be passed on the command line (--zero_copy, --get_data, and --auto_zc).
The ublk device will be created with all the requested feature flags,
however kublk will only use one of the modes to interact with request
data (arbitrarily preferring auto_zc over zero_copy over get_data). To
clarify the intent of the test, don't allow multiple data copy modes to
be specified. --zero_copy and --auto_zc are allowed together for
--auto_zc_fallback, which uses both copy modes.
Don't set UBLK_F_USER_COPY for zero_copy, as it's a separate feature.
Fix the test cases in test_stress_05 passing --get_data along with
--zero_copy or --auto_zc.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stress_04 is missing a wait between blocks of tests, meaning multiple
ublk servers will be running in parallel using the same backing files.
Add a wait after each section to ensure each backing file is in use by a
single ublk server at a time.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stress_04 is described as "run IO and kill ublk server(zero copy)" but
the --per_io_tasks tests cases don't use zero copy. Plus, one of the
test cases is duplicated. Add --auto_zc to these test cases and
--auto_zc_fallback to one of the duplicated ones. This matches the test
cases in stress_03.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
run_io_and_recover() invokes fio with --size="${size}", but the variable
size doesn't exist. Thus, the argument expands to --size=, which causes
fio to exit immediately with an error without issuing any I/O. Pass the
value for size as the first argument to the function.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The last_rw map is initialized with a value of 0 but later assigned the
value args.sector + args.nr_sector, which has type sector_t = u64.
bpftrace complains about the type mismatch between int64 and uint64:
trace/seq_io.bt:18:3-59: ERROR: Type mismatch for @last_rw: trying to assign value of type 'uint64' when map already contains a value of type 'int64'
@last_rw[$dev, str($2)] = (args.sector + args.nr_sector);
Cast the initial value to uint64 so bpftrace will load the program.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functions ublk_queue_use_zc(), ublk_queue_use_auto_zc(), and
ublk_queue_auto_zc_fallback() were returning int, but performing
bitwise AND on q->flags which is __u64.
When a flag bit is set in the upper 32 bits (beyond INT_MAX), the
result of the bitwise AND operation could overflow when cast to int,
leading to incorrect boolean evaluation.
For example, if UBLKS_Q_AUTO_BUF_REG_FALLBACK is 0x8000000000000000:
- (u64)flags & 0x8000000000000000 = 0x8000000000000000
- Cast to int: undefined behavior / incorrect value
- Used in if(): may evaluate incorrectly
Fix by:
1. Changing return type from int to bool for semantic correctness
2. Using !! to explicitly convert to boolean (0 or 1)
This ensures the functions return proper boolean values regardless
of which bit position the flags occupy in the 64-bit field.
Fixes: c3a6d48f86 ("selftests: ublk: remove ublk queue self-defined flags")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sched_ext selftests runner runs each test in the same process,
with each test possibly forking multiple times. When the main runner
has not flushed its stdout, the children inherit the buffered output
for previous tests and emit it during exit. This causes log spam.
Make sure stdout/stderr is fully flushed before each test.
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Jakub reports spurious failures of the 'conntrack_reverse_clash.sh'
selftest. A bogus test makes nat core resort to port rewrite even
though there is no need for this.
When the test is made, nf_nat_used_tuple() would already have caused us
to return if no other CPU had added a colliding entry.
Moreover, nf_nat_used_tuple() would have ignored the colliding entry if
their origin tuples had been the same.
All that is left to check is if the colliding entry in the hash table
is subject to NAT, and, if its not, if our entry matches in the reverse
direction, e.g. hash table has
addr1:1234 -> addr2:80, and we want to commit
addr2:80 -> addr1:1234.
Because we already checked that neither the new nor the committed entry is
subject to NAT we only have to check origin vs. reply tuple:
for non-nat entries, the reply tuple is always the inverted original.
Just in case there are more problems extend the error reporting
in the selftest while at it and dump conntrack table/stats on error.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175135.4a56591b@kernel.org/
Fixes: d8f84a9bc7 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal says:
====================
netfilter: updates for net
1) Fix refcount leaks in nf_conncount, from Fernando Fernandez Mancera.
This addresses a recent regression that came in the last -next
pull request.
2) Fix a null dereference in route error handling in IPVS, from Slavin
Liu. This is an ancient issue dating back to 5.1 days.
3) Always set ifindex in route tuple in the flowtable output path, from
Lorenzo Bianconi. This bug came in with the recent output path refactoring.
4) Prefer 'exit $ksft_xfail' over 'exit $ksft_skip' when we fail to
trigger a nat race condition to exercise the clash resolution path in
selftest infra, $ksft_skip should be reserved for missing tooling,
From myself.
* tag 'nf-25-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: prefer xfail in case race wasn't triggered
netfilter: always set route tuple out ifindex
ipvs: fix ipv4 null-ptr-deref in route error path
netfilter: nf_conncount: fix leaked ct in error paths
====================
Link: https://patch.msgid.link/20251210110754.22620-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test runs an overlay traffic, forwarded over a multicast-routed VXLAN
underlay. In order to determine whether packets reach their intended
destination, it uses a TC match. For convenience, it uses a flower match,
which however does not allow matching on the encapsulated packet. So
various service traffic ends up being indistinguishable from the test
packets, and ends up confusing the test. To alleviate the problem, the test
uses sleep to allow the necessary service traffic to run and clear the
channel, before running the test traffic. This worked for a while, but
lately we have nevertheless seen flakiness of the test in the CI.
Fix the issue by using u32 to match the encapsulated packet as well. The
confusing packets seem to always be IPv6 multicast listener reports.
Realistically they could be ARP or other ICMP6 traffic as well. Therefore
look for ethertype IPv4 in the IPv4 traffic test, and for IPv6 / UDP
combination in the IPv6 traffic test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6438cb1613a2a667d3ff64089eb5994778f247af.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flower is commonly used to match on packets in many bash-based selftests.
A dump of a flower filter including statistics looks something like this:
[
{
"protocol": "all",
"pref": 49152,
"kind": "flower",
"chain": 0
},
{
...
"options": {
...
"actions": [
{
...
"stats": {
"bytes": 0,
"packets": 0,
"drops": 0,
"overlimits": 0,
"requeues": 0,
"backlog": 0,
"qlen": 0
}
}
]
}
}
]
The JQ query in the helper function tc_rule_stats_get() assumes this form
and looks for the second element of the array.
However, a dump of a u32 filter looks like this:
[
{
"protocol": "all",
"pref": 49151,
"kind": "u32",
"chain": 0
},
{
"protocol": "all",
"pref": 49151,
"kind": "u32",
"chain": 0,
"options": {
"fh": "800:",
"ht_divisor": 1
}
},
{
...
"options": {
...
"actions": [
{
...
"stats": {
"bytes": 0,
"packets": 0,
"drops": 0,
"overlimits": 0,
"requeues": 0,
"backlog": 0,
"qlen": 0
}
}
]
}
},
]
There's an extra element which the JQ query ends up choosing.
Instead of hard-coding a particular index, look for the entry on which a
selector .options.actions yields anything.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/12982a44471c834511a0ee6c1e8f57e3a5307105.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub says: "We try to reserve SKIP for tests skipped because tool is
missing in env, something isn't built into the kernel etc."
use xfail, we can't force the race condition to appear at will
so its expected that the test 'fails' occasionally.
Fixes: 78a5883635 ("selftests: netfilter: add conntrack clash resolution test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175647.5c32f419@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Fix
tfo.c: In function ‘run_server’:
tfo.c:84:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by evaluating the return value from read() and displaying an error message
if it reports an error.
Fixes: c65b5bb232 ("selftests: net: add passive TFO test binary")
Cc: David Wei <dw@davidwei.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-14-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix
ksft.h: In function ‘ksft_ready’:
ksft.h:27:9: warning: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’
ksft.h: In function ‘ksft_wait’:
ksft.h:51:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by checking the return value of the affected functions and displaying
an error message if an error is seen.
Fixes: 2b6d490b82 ("selftests: drv-net: Factor out ksft C helpers")
Cc: Joe Damato <jdamato@fastly.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-11-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In 'poll_partial_rec_async' a uninitialized char variable 'token' with
is used for write/read instruction to synchronize between threads
via a pipe.
tls.c:2833:26: warning: variable 'token' is uninitialized
when passed as a const pointer argument
Initialize 'token' to '\0' to silence compiler warning.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20251205163242.14615-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull futex updates from Ingo Molnar:
- Standardize on ktime_t in restart_block::time as well (Thomas
Weißschuh)
- Futex selftests:
- Add robust list testcases (André Almeida)
- Formatting fixes/cleanups (Carlos Llamas)
* tag 'locking-futex-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Store time as ktime_t in restart block
selftests/futex: Create test for robust list
selftests/futex: Skip tests if shmget unsupported
selftests/futex: Add newline to ksft_exit_fail_msg()
selftests/futex: Remove unused test_futex_mpol()
This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace instances of "__auto_type" with "auto" in:
tools/testing/selftests/bpf/prog_tests/socket_helpers.h
This file does not seem to be including <linux/compiler_types.h>
directly or indirectly, so copy the definition but guard it with
!defined(auto).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
Pull landlock updates from Mickaël Salaün:
"This mainly fixes handling of disconnected directories and adds new
tests"
* tag 'landlock-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add disconnected leafs and branch test suites
selftests/landlock: Add tests for access through disconnected paths
landlock: Improve variable scope
landlock: Fix handling of disconnected directories
selftests/landlock: Fix makefile header list
landlock: Make docs in cred.h and domain.h visible
landlock: Minor comments improvements
Pull nvdimm updates from Ira Weiny:
"These are mainly bug fixes and code updates.
There is a new feature to divide up memmap= carve outs and a fix
caught in linux-next for that patch. Managing memmap memory on the fly
for multiple VM's was proving difficult and Mike provided a driver
which allows for the memory to be better manged.
Summary:
- Allow exposing RAM carveouts as NVDIMM DIMM devices
- Prevent integer overflow in ramdax_get_config_data()
- Replace use of system_wq with system_percpu_wq
- Documentation: btt: Unwrap bit 31-30 nested table
- tools/testing/nvdimm: Use per-DIMM device handle"
* tag 'libnvdimm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Prevent integer overflow in ramdax_get_config_data()
Documentation: btt: Unwrap bit 31-30 nested table
nvdimm: replace use of system_wq with system_percpu_wq
tools/testing/nvdimm: Use per-DIMM device handle
nvdimm: allow exposing RAM carveouts as NVDIMM DIMM devices
Pull dma-mapping updates from Marek Szyprowski:
- More DMA mapping API refactoring to physical addresses as the primary
interface instead of page+offset parameters.
This time dma_map_ops callbacks are converted to physical addresses,
what in turn results also in some simplification of architecture
specific code (Leon Romanovsky and Jason Gunthorpe)
- Clarify that dma_map_benchmark is not a kernel self-test, but
standalone tool (Qinxin Xia)
* tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: remove unused map_page callback
xen: swiotlb: Convert mapping routine to rely on physical address
x86: Use physical address for DMA mapping
sparc: Use physical address DMA mapping
powerpc: Convert to physical address DMA mapping
parisc: Convert DMA map_page to map_phys interface
MIPS/jazzdma: Provide physical address directly
alpha: Convert mapping routine to rely on physical address
dma-mapping: remove unused mapping resource callbacks
xen: swiotlb: Switch to physical address mapping callbacks
ARM: dma-mapping: Switch to physical address mapping callbacks
ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*()
dma-mapping: convert dummy ops to physical address mapping
dma-mapping: prepare dma_map_ops to conversion to physical address
tools/dma: move dma_map_benchmark from selftests to tools/dma
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
