atcphy_probe_switch() and atcphy_probe_mux() discard the pointers
returned by typec_switch_register() and typec_mux_register(). The
platform driver has no .remove callback, so when the driver unbinds
(e.g. via sysfs unbind) neither typec_switch_unregister() nor
typec_mux_unregister() is called. The framework reference taken in
typec_switch_register() (device_initialize() + device_add() in
drivers/usb/typec/mux.c) is therefore never dropped and the
typec_switch_dev / typec_mux_dev objects stay live forever, with
their sysfs entries under the typec_mux class also left behind. A
subsequent rebind cannot recreate them with the same fwnode-derived
name.
Save the registered handles and unregister them through
devm_add_action_or_reset() so framework registration is torn down
in step with the driver's other devm-managed state. While here,
drop struct apple_atcphy::sw and ::mux: they were declared with the
consumer-side types (typec_switch *, typec_mux *) instead of the
provider-side types and were never assigned.
Scope of the fix
================
This patch fixes the registration leak only. It does not close the
use-after-free window that arises when a consumer that obtained a
reference via fwnode_typec_switch_get() / fwnode_typec_mux_get()
outlives the provider unbind: such consumers keep the underlying
typec_switch_dev / typec_mux_dev alive past device_unregister(),
and a later typec_switch_set() / typec_mux_set() still invokes the
registered atcphy_sw_set() / atcphy_mux_set(), which dereferences
the freed apple_atcphy through typec_{switch,mux}_get_drvdata().
On Apple Silicon the relevant consumers are the typec port and the
cd321x controller registered by drivers/usb/typec/tipd/core.c.
Cable plug / orientation events and alt-mode transitions trigger
the .set callbacks via:
tps6598x_interrupt() drivers/usb/typec/tipd/core.c
tps6598x_handle_plug_event()
tps6598x_connect()/_disconnect()
typec_set_orientation() drivers/usb/typec/class.c
typec_switch_set(port->sw) drivers/usb/typec/mux.c
atcphy_sw_set() drivers/phy/apple/atc.c
cd321x_update_work() drivers/usb/typec/tipd/core.c
cd321x_typec_update_mode()
typec_mux_set(cd321x->mux) drivers/usb/typec/mux.c
atcphy_mux_set() drivers/phy/apple/atc.c
Closing that window requires framework support for invalidating
consumer-held references on provider unbind. The same
consumer-survives-provider pattern has been discussed for the PHY
framework [1] and is out of scope here.
[1] https://lore.kernel.org/linux-phy/aZejMSJ9qqRWb2pX@google.com/
Fixes: 8e98ca1e74 ("phy: apple: Add Apple Type-C PHY")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://lkml.kernel.org/r/6ec1ed08328340db42655287afd5fa4067316b11.camel@perches.com
Link: https://patch.msgid.link/20260508201958.30060-1-devnexen@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 81af9e40e2 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
moved QPHY_V6_PCS_UFS_PLL_CNTL register configuration from the shared
sm8650_ufsphy_g5_pcs table to the SM8650-specific sm8650_ufsphy_pcs base
table to fix Gear 4 operation on SM8650.
However, this change inadvertently broke kaanapali and SM8750 SoCs
which also rely on the shared sm8650_ufsphy_g5_pcs table for Gear 5
configuration but use their own sm8750_ufsphy_pcs base table. After the
change, kaanapali PHYs are left without the required PLL_CNTL = 0x33
setting, causing the PHY PLL to remain at its hardware reset default
value, preventing PLL lock and resulting in DME_LINKSTARTUP timeouts.
Fix this by adding the missing QPHY_V6_PCS_UFS_PLL_CNTL = 0x33 entry
to the sm8750_ufsphy_pcs table, mirroring what the original commit
already did for sm8650_ufsphy_pcs.
Cc: stable@vger.kernel.org # v6.19.12
Fixes: 81af9e40e2 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260415104851.2763238-1-nitin.rawat@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing PHYPARAM0 tuning values for Exynos7870 are incorrect,
causing the USB 2.0 PHY to fail high-speed negotiation and fall back
to full-speed (12Mbps) operation.
Fix TXVREFTUNE (transmitter voltage reference) from 14 to 3,
TXRESTUNE (transmitter impedance) from 3 to 2, and SQRXTUNE
(squelch threshold) from 6 to 5. Also explicitly set
TXPREEMPPULSETUNE to 0, which was previously missing from the
tuning table despite being included in the register mask.
All values are derived from the vendor kernel for the Samsung
Galaxy A6 (SM-A600FN), as no public hardware documentation is
available for the Exynos7870 USB DRD PHY. With these corrections,
the PHY successfully negotiates high-speed (480Mbps) operation.
Fixes: 588d5d20ca ("phy: exynos5-usbdrd: add exynos7870 USBDRD support")
Cc: stable@vger.kernel.org
Tested-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Łukasz Lebiedziński <kernel@lvkasz.us>
Link: https://patch.msgid.link/20260406135627.234835-1-kernel@lvkasz.us
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing code reads a single hs_term_range_adj value from bit field
[10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly.
However, on SoCs that support per-pad termination, each pad has its own
hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3
in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13]
respectively.
Fix the calibration by reading per-pad values from the appropriate fuse
registers. For SoCs that do not support per-pad termination, replicate
pad 0's value to all pads to maintain existing behavior.
Add a has_per_pad_term flag to the SoC data to indicate whether per-pad
termination values are available in FUSE_USB_CALIB_EXT_0.
Fixes: 1ef535c6ba ("phy: tegra: xusb: Add Tegra194 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The mvebu_a3700_utmi_phy_power_off() function tries to modify the
USB2_PHY_CTRL register by using the IO address of the PHY IP block along
with the readl/writel IO accessors. However, the register exist in the
USB miscellaneous register space, and as such it must be accessed via
regmap like it is done in the mvebu_a3700_utmi_phy_power_on() function.
Change the code to use regmap_update_bits() for modífying the register
to fix this.
Fixes: cc8b7a0ae8 ("phy: add A3700 UTMI PHY driver")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260321-a3700-utmi-fix-usb2_phy_ctrl-access-v1-1-6005ff4b5058@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The eDP PHY supports both eDP/DP modes, each requiring a different
swing/pre-emphasis table. However, the driver currently uses a fixed
static table for eDP programming rather than selecting the appropriate
table based on the current mode. Add separate tables for eDP and DP
modes, and select the appropriate table dynamically based on the
current mode.
Glymur's DP mode table differs from the other platforms, add a
dedicated table for it.
This also fixes the table mismatch for X1E80100 (eDP) and SA8775P (DP).
Cc: stable@vger.kernel.org
Fixes: 3f12bf1621 ("phy: qcom: edp: Add support for eDP PHY on SA8775P")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-2-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Eliza QMP UFS PHY
- Canaan K230 USB 2.0 PHY driver
- Mediatek mt8167 dsi-phy
- Eswin EIC7700 SATA PHY driver
Updates:
- Sorted subsytem Makefile/Kconfig and some kernel-doc udpates"
* tag 'phy-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Eliza QMP UFS PHY
phy: qcom: m31-eusb2: clear PLL_EN during init
phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver
dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY
phy: apple: apple: Use local variable for ioremap return value
phy: qcom: qmp-usbc: Simplify check for non-NULL pointer
phy: marvell: mmp3-hsic: Avoid re-casting __iomem
phy: apple: atc: Make atcphy_dwc3_reset_ops variable static
dt-bindings: phy: mediatek,dsi-phy: Add support for mt8167
phy: usb: Add driver for Canaan K230 USB 2.0 PHY
dt-bindings: phy: Add Canaan K230 USB PHY
phy: phy-mtk-tphy: Update names and format of kernel-doc comments
phy: Sort the subsystem Kconfig
phy: Sort the subsystem Makefile
phy: move spacemit pcie driver to its subfolder
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path
MMC host:
- dw_mmc:
- A great amount of cleanups/simplifications to improve the code
- Add clk_phase_map support
- Remove mshc DT alias support
- dw_mmc-rockchip:
- Fix runtime PM support for internal phase
- Add support for the RV1103B variant
- loongson2:
- Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd:
- Add support for the MT8189 variant
- renesas_sdhi_core:
- Add support for selecting an optional mux
- rtsx_pci_sdmmc:
- Simplify voltage switch handling
- sdhci:
- Stop advertising the driver in dmesg
- sdhci-esdhc-imx:
- Add 1-bit bus width support
- Add support for the NXP S32N79 variant
- sdhci-msm:
- Add support for the IPQ5210 and IPQ9650 variants
- Add support for wrapped keys
- Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan:
- Add support for the Axiado AX3000 variant
- sdhci-of-aspeed:
- Add support for the AST2700 variant
- sdhci-of-bst:
- Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc:
- Add support for the Canaan K230 variant
- Add support for the HPE GSC variant
- Prevent clock glitches to avoid malfunction
- sdhci-of-k1:
- Add support for the K3 variant
mux core/consumers:
- core:
- Add helper functions for getting optional and selected mux-state
- i2c-omap:
- Convert to devm_mux_state_get_optional_selected()
- phy-renesas:
- Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver:
- Convert to devm_mux_state_get_optional()"
* tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits)
mmc: sdhci-msm: Fix the wrapped key handling
mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration
mmc: core: Simplify with scoped for each OF child loop
mmc: core: Optimize size of struct mmc_queue_req
mmc: vub300: clean up module init
mmc: vub300: rename probe error labels
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops
mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support
mmc: mmc_test: use kzalloc_flex
mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189
dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema
dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible
mmc: block: use single block write in retry
...
This patch
- makes mdio_device.c part of libphy
- makes mdio_device_(un)register_reset() static
- moves mdiobus_(un)register_device() from mdio_bus.c to mdio_device.c,
stops exporting both functions and makes them private to phylib
This further decouples the MDIO consumer functionality from libphy.
Note: This makes MDIO driver registration part of phylib, therefore
adjust Kconfig dependencies where needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c6dbf9b3-3ca0-434b-ad3a-71fe602ab809@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multiplexer subsystem has now added helpers for getting managed optional
mux-state.
Switch to the new devm_mux_state_get_optional_selected helper.
This change is only compile-tested.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
As established in the previous commit, using SPEED_1000 and SPEED_2500
does not make sense for a SerDes due to the PCS encoding that is used
over the SerDes link, which inflates the data rate at the SerDes. Thus,
the use of these constants in a SerDes driver is incorrect.
Since qcom-sgmii-eth no longer implements phy_set_speed(), but instead
uses the PHY interface mode passed via the .set_mode() method, convert
the driver to use the PHY interface mode internally to decide whether
to configure the SerDes for 1.25Gbps or 3.125Gbps mode.
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS4E-0000000BQXg-46dJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the qcom-ethqos driver has migrated to use phy_set_mode_ext()
rather than phy_set_speed() to configure the SerDes, the support for
phy_set_speed() is now obsolete. Remove support for this method.
Using the MAC speed for the SerDes is never correct due to the PCS
encoding. For SGMII and 2500BASE-X, the PCS uses 8B10B encoding, and
so:
MAC rate * PCS output bits / PCS input bits = SerDes rate
1000M * 10 / 8 = 1250M
2500M * 10 / 8 = 3125M
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS49-0000000BQXa-3Zcg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qcom-sgmii-eth is an Ethernet SerDes supporting only Ethernet mode
using SGMII, 1000BASE-X and 2500BASE-X.
Add an implementation of the .set_mode() method, which can be used
instead of or as well as the .set_speed() method. The Ethernet
interface modes mentioned above all have a fixed data rate, so
setting the mode is sufficient to fully specify the operating
parameters.
Add an implementation of the .validate() method, which will be
necessary to allow discovery of the SerDes capabilities for platform
independent SerDes support in the stmmac network driver.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vvkU3-0000000AuP2-0hu3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver currently sets bit 0 of USB_PHY_CFG1 (PLL_EN) during PHY
initialization. According to the M31 EUSB2 PHY hardware documentation,
this bit is intended only for test/debug scenarios and does not control
mission mode operation. Keeping PLL_EN asserted causes the PHY to draw
additional current during USB bus suspend. Clearing this bit results in
lower suspend power consumption without affecting normal operation.
Update the driver to leave PLL_EN cleared as recommended by the hardware
documentation.
Fixes: 9c8504861c ("phy: qcom: Add M31 based eUSB2 PHY driver")
Cc: stable@vger.kernel.org
Signed-off-by: Elson Serrao <elson.serrao@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260217201130.2804550-1-elson.serrao@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The serdes device_node is obtained using of_get_child_by_name(),
which increments the reference count. However, it is never put,
leading to a reference leak.
Add the missing of_node_put() calls to ensure the reference count is
properly balanced.
Fixes: 7ae14cf581 ("phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260212-wiz-v2-1-6e8bd4cc7a4a@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
__iomem annotated memory must be accessed via dedicated accessors, even
if actual code is correct (accessing the driver data in
mmp3_hsic_phy_init() brings back the __iomem cast), but dropping its
cast (with or without __force) when storing as driver data seems like
less readable code for any future changes. Instead, add a dedicated
wrapping structure just to hold the pointer without changing the __iomem
cast. This makes the code explicit, obvious and solves the sparse
warning:
phy-mmp3-hsic.c:58:31: warning: cast removes address space '__iomem' of expression
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260216110413.159994-5-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The blamed commit introduced support for specifying individual lanes as
OF nodes in the device, and these can have status = "disabled".
When that happens, for_each_available_child_of_node() skips them and
lynx_28g_probe_lane() -> devm_phy_create() is not called, so lane->phy
will be NULL. Yet it will be dereferenced in lynx_28g_cdr_lock_check(),
resulting in a crash.
This used to be well handled in v3 of that patch:
https://lore.kernel.org/linux-phy/20250926180505.760089-14-vladimir.oltean@nxp.com/
but until v5 was merged, the logic to support per-lane OF nodes was
split into a separate change, and the per-SoC compatible strings patch
was deferred to a "part 2" set. The splitting was done improperly, and
that handling of NULL lane->phy pointers was not integrated into the
proper commit.
Fixes: 7df7d58abb ("phy: lynx-28g: support individual lanes as OF PHY providers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260226182853.1103616-1-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Geert reports that enabling CONFIG_KUNIT_ALL_TESTS shouldn't enable
features that aren't enabled without it. That isn't what "*all* tests"
means, but as the prompt puts it, "All KUnit tests with satisfied
dependencies".
The impact is that enabling CONFIG_KUNIT_ALL_TESTS brings features which
cannot be disabled as built-in into the kernel.
Keep the pattern where consumer drivers have to "select PHY_COMMON_PROPS",
but if KUNIT_ALL_TESTS is enabled, also make PHY_COMMON_PROPS user
selectable, so it can be turned off.
Modify PHY_COMMON_PROPS_TEST to depend on PHY_COMMON_PROPS rather than
select it.
Fixes: e7556b59ba ("phy: add phy_get_rx_polarity() and phy_get_tx_polarity()")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-phy/CAMuHMdUBaoYKNj52gn8DQeZFZ42Cvm6xT6fvo0-_twNv1k3Jhg@mail.gmail.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260226153315.3530378-1-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
mtk_phy_pdata documentation does not use correct tag for struct, while at
it fix one of member wrongly documented.
Warning: drivers/phy/mediatek/phy-mtk-tphy.c:289 cannot understand function prototype: 'struct mtk_phy_pdata'
Warning: drivers/phy/mediatek/phy-mtk-tphy.c:296 struct member 'slew_ref_clock_mhz' not described in 'mtk_phy_pdata'
Link: https://patch.msgid.link/20260223071032.408425-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 27287e3b52 ("phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20260108-clk-divider-round-rate-v1-25-535a3ed73bf3@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver start registering a regulator, but can still be
enabled even when it is unable to call into the regulator
subsystem:
aarch64-linux-ld: drivers/phy/renesas/phy-rcar-gen3-usb2.o: in function `rcar_gen3_phy_usb2_probe':
phy-rcar-gen3-usb2.c:(.text+0x2884): undefined reference to `devm_regulator_register'
Add a Kconfig dependency to avoid this configuration.
Fixes: b6d7dd1577 ("phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260202095118.1233046-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With CONFIG_TYPEC=m, this driver cannot be built-in:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: drivers/phy/phy-google-usb.o: in function `google_usb_phy_remove':
phy-google-usb.c:(.text+0x24): undefined reference to `typec_switch_unregister'
Add CONFIG_TYPEC as a hard dependency here to force a clean build.
In theory, compile-testing with CONFIG_TYPEC=n would also work, but
that seems pointless.
Fixes: cbce66669c ("phy: Add Google Tensor SoC USB PHY driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260202095655.1289973-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
