The command stream parsing loop increments the index variable a second
time when a 64-bit command word is encountered (bit 14 set), but does
not re-check the loop bound before writing the second word:
for (i = 0; i < size / 4; i++) {
bocmds[i] = cmds[0];
if (cmd & 0x4000) {
i++;
bocmds[i] = cmds[1]; /* unchecked */
}
}
The buffer bocmds is backed by a DMA allocation of exactly size bytes
from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1].
When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is
set, bocmds[size/4-1] is written in bounds, i is then incremented to
size/4, and bocmds[size/4] writes four bytes past the end of the
allocation.
Userspace controls both the buffer contents and the size argument via
the ioctl, making this a userspace-triggerable heap out-of-bounds write.
Fix by checking the incremented index against the buffer bound before
the second write and returning -EINVAL if the buffer is too small to
contain the extended command.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523190843.33977-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
cmd_state_init() initializes the command state with memset(0xff),
leaving dma->len at U64_MAX to signal missing setup. The only setter
is NPU_SET_DMA0_LEN; if userspace omits this command and issues
NPU_OP_DMA_START, dma->len remains U64_MAX.
In dma_length(), a positive stride added to U64_MAX wraps to a small
value. With size0 == 1, check_mul_overflow() does not trigger and
dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check
then passes, region_size[] stays 0, and the bounds check in
ethosu_job.c is bypassed, allowing hardware to execute DMA with stale
physical addresses.
Fix by checking for U64_MAX at the start of dma_length() before any
arithmetic, consistent with the sentinel value used throughout the
driver to detect uninitialized fields.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260524130319.12747-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260524103710.47397-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
On non-U65 hardware (e.g. U85), opcode 0x4093 is NPU_SET_WEIGHT2_LENGTH.
The BASE handler for the same opcode correctly assigns to
st.weight[2].base, but the LENGTH handler mistakenly assigns cmds[1]
to st.weight[1].length instead of st.weight[2].length.
This leaves weight[2].length at its initialised sentinel value of
0xffffffff and corrupts weight[1].length with the user-supplied value,
breaking the software bounds-check state for both weight buffers on U85.
Fix the index to match the BASE handler.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523210840.92039-3-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
NPU_OP_RESIZE is a U85-only command that the driver does not yet
implement. The existing WARN_ON(1) placeholder fires unconditionally
whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE,
causing unbounded kernel log spam.
If panic_on_warn is set the kernel panics, giving any unprivileged user
with access to the DRM device a trivial denial-of-service primitive.
Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl
rejects the command before it reaches hardware.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523210840.92039-2-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523195159.55801-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The simple_write_to_buffer() will only initialize data starting from
the *pos offset so if it's non-zero then the first part of the buffer
uninitialized. Really, if *pos is non-zero then this code won't work
so just check for that at the start of the function.
Fixes: 320323d2e5 ("accel/ivpu: Add debugfs interface for setting HWS priority bands")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/ahP24m6Mii9EDL7Q@stanley.mountain
rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via
drm_gem_handle_create() early on, then performs several operations that
can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after
the handle is live, the error path calls drm_gem_shmem_object_free()
which kfree's the object without removing the handle from the IDR.
This leaves a dangling handle pointing to freed slab memory. Any
subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls
drm_gem_object_lookup() and dereferences freed memory (UAF).
Fix by moving drm_gem_handle_create() to after all fallible operations
succeed, matching the pattern used by panfrost, lima, and etnaviv.
Also fix drm_mm_insert_node_generic() whose return value was silently
overwritten by iommu_map_sgtable() on the next line. Add the missing
error check.
[tomeu: Move handle creation to the very end]
Fixes: 658ebeac33 ("accel/rocket: Add IOCTL for BO creation")
Reported-by: Dhabaleshwar Das <dhabal123@gmail.com>
Signed-off-by: Dhabaleshwar Das <dhabal123@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20260521165720.2113571-1-tomeu@tomeuvizoso.net
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Prevent re-exporting of imported GEM buffers by adding a custom
prime_handle_to_fd callback that checks if the object is imported
and returns -EOPNOTSUPP if so.
Re-exporting imported GEM buffers causes loss of buffer flags settings,
leading to incorrect device access and data corruption.
Reported-by: Yametsu <yam3tsu@gmail.com>
Fixes: 57557964b5 ("accel/ivpu: Add support for userptr buffer objects")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.19+
Pull drm updates from Dave Airlie:
"Highlights:
- new DRM RAS infrastructure using netlink
- amdgpu: enable DC on CIK APUs, and more IP enablement, and more
user queue work
- xe: purgeable BO support, and new hw enablement
- dma-buf : add revocable operations
Full summary:
mm:
- two-pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve
others
- fsl-ldb: Fix visual artifacts plus related DT property
'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus
DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN
N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW
MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support
backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks"
* tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits)
drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc
drm/ttm/tests: fix lru_count ASSERT
drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs
drm/fb-helper: Fix a locking bug in an error path
dma-fence: correct kernel-doc function parameter @flags
ttm/pool: track allocated_pages per numa node.
ttm/pool: make pool shrinker NUMA aware (v2)
ttm/pool: drop numa specific pools
ttm/pool: port to list_lru. (v2)
drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)
mm: add gpu active/reclaim per-node stat counters (v2)
gpu: nova-core: fix missing colon in SEC2 boot debug message
gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing
gpu: nova-core: bitfield: fix broken Default implementation
gpu: nova-core: falcon: pad firmware DMA object size to required block alignment
gpu: nova-core: gsp: fix undefined behavior in command queue code
drm/shmem_helper: Make sure PMD entries get the writeable upgrade
accel/ivpu: Trigger recovery on TDR with OS scheduling
drm/msm: Use of_get_available_child_by_name()
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
...
Thomas Zimmermann needs 2f42c1a616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae1 ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a611628 ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
When a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEV
transaction to the host over the QAIC_CONTROL MHI channel. QAIC handles
this by calling decode_deactivate() to release the resources allocated for
that DBC. Since that handling is done in the qaic_manage_ioctl() context,
if the user goes away before receiving and handling the deactivation, the
host will be out-of-sync with the DBCs available for use, and the DBC
resources will not be freed unless the device is removed. If another user
loads and requests to activate a network, then the device assigns the same
DBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,
leading the user process to hang.
As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactions
that are received after the user has gone away.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205123415.3870898-1-youssef.abdulrahman@oss.qualcomm.com
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260326151812.GA76082@linux.fritz.box
Add support for querying per-process buffer object (BO) memory
usage through the amdxdna GET_ARRAY UAPI.
Introduce a new query type, DRM_AMDXDNA_BO_USAGE, along with
struct amdxdna_drm_bo_usage to report BO memory usage statistics,
including heap, total, and internal usage.
Track BO memory usage on a per-client basis by maintaining counters
in GEM open/close and heap allocation/free paths. This ensures the
reported statistics reflect the current memory footprint of each
process.
Wire the new query into the GET_ARRAY implementation to expose
the usage information to userspace.
Link: 0546f2aaad
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260324163159.2425461-1-lizhi.hou@amd.com
Refactor amdxdna GEM buffer object (BO) handling to simplify address
management and unify BO type semantics.
Introduce helper APIs to retrieve commonly used BO addresses:
- User virtual address (UVA)
- Kernel virtual address (KVA)
- Device address (IOVA/PA)
These helpers centralize address lookup logic and avoid duplicating
BO-specific handling across submission and execution paths. This also
improves readability and reduces the risk of inconsistent address
handling in future changes.
As part of the refactor:
- Rename SHMEM BO type to SHARE to better reflect its usage.
- Merge CMD BO handling into SHARE, removing special-case logic for
command buffers.
- Consolidate BO type handling paths to reduce code duplication and
simplify maintenance.
No functional change is intended. The refactor prepares the driver for
future enhancements by providing a cleaner abstraction for BO address
management.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260320210615.1973016-1-lizhi.hou@amd.com
Replace full device recovery on TDR timeout with per-context abort,
allowing individual context handling instead of resetting the entire
device.
Extend ivpu_jsm_reset_engine() to return the list of contexts impacted
by the engine reset and use that information to abort only the affected
contexts.
Only check for potentially faulty contexts when the engine reset was not
triggered by an MMU fault or a job completion error status. This prevents
misidentifying non-guilty contexts that happened to be running at the
time of the fault.
Trigger full device recovery if no contexts were marked by engine reset
if triggered by job completion timeout, as there is no way to identify
guilty one.
Add engine reset counter to debugfs for engine resets bookkeeping
for debugging/testing purposes.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260318093927.4080303-1-karol.wachowski@linux.intel.com
The firmware implements the GET_APP_HEALTH command to collect debug
information for a specific hardware context.
When a command times out, the driver issues this command to collect the
relevant debug information. User space tools can also retrieve this
information through the hardware context query IOCTL.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260317044906.1513133-1-lizhi.hou@amd.com
The amdxdna driver normally performs DMA using userspace virtual address
plus PASID. For debugging and validation purposes, add a module parameter,
force_iova, to force DMA to go through IOMMU IOVA mapping.
When force_iova=1 is set, the driver will allocate and map DMA buffers
using IOVA.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260126193001.1400545-1-lizhi.hou@amd.com
The AMD PMF driver provides realtime column utilization (npu_busy)
metrics for the NPU. Extend the DRM_IOCTL_AMDXDNA_GET_INFO sensor
query to expose these metrics to userspace.
Add AMDXDNA_SENSOR_TYPE_COLUMN_UTILIZATION to the sensor type enum
and update aie2_get_sensors() to return both the total power and up
to 8 column utilization sensors if the user buffer permits.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
[lizhi: support legacy tool which uses small buffer. checkpatch cleanup]
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260311171842.473453-1-lizhi.hou@amd.com
The AMD PMF driver provides an interface to obtain realtime power
estimates for the NPU. Expose this information to userspace through a
new DRM_IOCTL_AMDXDNA_GET_INFO parameter, allowing applications to query
the current NPU power level.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
(Update comment to indicate power and utilization)
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260228061109.361239-2-superm1@kernel.org
Requested by Maxime Ripard for drm-misc-next because renesas people need
fb797a7010 ("drm: renesas: rz-du: mipi_dsi: Set DSI divider").
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
The runtime suspend callback drains the running job workqueue before
suspending the device. If a job is still executing and calls
pm_runtime_resume_and_get(), it can deadlock with the runtime suspend
path.
Fix this by moving pm_runtime_resume_and_get() from the job execution
routine to the job submission routine, ensuring the device is resumed
before the job is queued and avoiding the deadlock during runtime
suspend.
Fixes: 063db45183 ("accel/amdxdna: Enhance runtime power management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260310180058.336348-1-lizhi.hou@amd.com
If the command stream has larger padding sizes than the IFM and OFM
diminsions, then the calculations will underflow to a negative value.
The result is a very large region bounds which is caught on submit, but
it's better to catch it earlier.
Current mesa ethosu driver has a signedness bug which resulted in
padding of 127 (the max) and triggers this issue.
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-3-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
