After commit f7d5bcd35d ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After commit f7d5bcd35d ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After commit f7d5bcd35d ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_pass(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_pass() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After commit f7d5bcd35d ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After commit f7d5bcd35d ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This test outputs lots of information. Let's conform the core part of
the test to TAP and leave the information printing messages for now.
Include ktap_helpers.sh to print conformed logs. Use KSFT_* macros to
return the correct exit code for the kselftest framework and CIs to
understand the exit status.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let the compilers (clang) know that this function would just call
exit() and would never return. It is needed to avoid false positive
static analysis errors. All similar functions calling exit()
unconditionally have been marked as __noreturn.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When logging an error from calling waitpid() on the child we print a
misleading error message saying that the error we report was returned by
the chilld. Fix this to say the error is from waitpid().
Applied after fixing merge conflict:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When the child exits during the clone3() selftest we use WEXITSTATUS() to
get the exit status from the process without first checking WIFEXITED() to
see if the result will be valid. This can lead to incorrect results, for
example if the child exits due to signal. Add a WIFEXTED() check and report
any non-standard exit as a failure, using EXIT_FAILURE as the exit status
for call_clone3() since we otherwise report 0 or negative errnos.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Shuah reported a compiler warning with an Ubuntu GCC 13 build, I've been
unable to reproduce it but hopefully this fixes the issue:
clone3_set_tid.c:136:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to facilitate debugging of issues from automated runs of the ftrace
selftests turn on verbose logging by default when run from the kselftest
runner. This is primarily used by automated systems where developers may
not have direct access to the system so defaulting to providing diagnostic
information which might help debug problems seems like a good idea.
When tests pass no extra output is generated, when they fail a full log of
the test run is provided. Since this really is rather verbose when there are
a large number of test failures or output is slow (eg, with a serial
console) this could substantially increase the run time for the tests which
might present problems with timeout detection for affected systems,
hopefully we keep the tests running well enough that this is not too much
of an issue.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When -v is specified ftracetest will dump logs of test execution to the
console which if -K is also specified for KTAP output will result in
output that is not properly KTAP formatted. All that's required for KTAP
formatting is that anything we log have a '#' at the start of the line so
we can improve things by washing the output through a simple read loop.
This will help automated parsers when verbose mode is enabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use ksft_exit_fail_perror() to print the value of errno and its string
form. This is the first user of the ksft_exit_fail_perror() and proves
the usefulness of this API.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a version of ksft_exit_fail_msg() which prints the errno and its
string form with ease. There is no benefit of exit message without
errno. Whenever some error occurs, instead of printing errno manually,
this function would be very helpful. In the next TAP ports or new tests,
this function will be used instead of ksft_exit_fail_msg() as it prints
errno.
Resolved merge conflict found in next between the following commits:
f7d5bcd35d ("selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn")
f07041728422 ("selftests: add ksft_exit_fail_perror()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The comment on top of the file is used by many developers to glance over
all the available functions. Add the recently added ksft_perror() to it.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test results reported for the clone3_set_tid tests interact poorly with
automation for running kselftest since the reported test names include TIDs
dynamically allocated at runtime. A lot of automation for running kselftest
will compare runs by looking at the test name to identify if the same test
is being run so changing names make it look like the testsuite has been
updated to include new tests. This makes the results display less clearly
and breaks cases like bisection.
Address this by providing a brief description of the tests and logging that
along with the stable parameters for the test currently logged. The TIDs
are already logged separately in existing logging except for the final test
which has a new log message added. We also tweak the formatting of the
logging of expected/actual values for clarity.
There are still issues with the logging of skipped tests (many are simply
not logged at all when skipped and all are logged with different names) but
these are less disruptive since the skips are all based on not being run as
root, a condition likely to be stable for a given test system.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Every test calls its cleanup function at the end of it's test function.
After the cleanup function pointer is added to the test framework this
can be simplified to executing the callback function at the end of the
generic test running function.
Make test cleanup functions static and call them from the end of
run_single_test() from the resctrl_test's cleanup function pointer.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Ctrl-c handler isn't aware of what test is currently running. Because of
that it executes all cleanups even if they aren't necessary. Since the
ctrl-c handler uses the sa_sigaction system no parameters can be passed
to it as function arguments.
Add a global variable to make ctrl-c handler aware of the currently run
test and only execute the correct cleanup callback.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl selftests use very similar functions to cleanup after
themselves. This creates a lot of code duplication. Also not being
hooked to the test framework means that ctrl-c handler isn't aware of
what test is currently running and executes all cleanups even though
only one is needed.
Add a function pointer to the resctrl_test struct and attach to it
cleanup functions from individual tests.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Improve the TAP messages as well.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Add more logic code to skip the tests if particular configuration isn't
available to make sure that either we skip each test or mark it pass/fail.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are multiple #ifdef blocks inside functions where they return just
0 if #ifdef is false. This makes number of tests counting difficult.
Move those functions inside one #ifdef block and move all of them
together. This is preparatory patch for next patch to convert this into
TAP format. So in this patch, we are just moving functions around
without any changes.
With and without this patch, the output of this patch is same.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the tty_tstamp_update test reports a different exit message
for every path it can exit via. This can be confusing for automated systems
as the string that gets logged is interpreted as a test name so if the test
status changes they can't tell that it's the same test case that was run,
they can see that the overall status of the test program is a failure but
it's not clear that it was running the same test.
Change all the messages that are logged to be diagnostic prints and log the
name of the program as the test name.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently there's no helper which a test can use to report it's result as
a KSFT_ result code, we can report a boolean pass/fail but not a skip. This
is sometimes a useful idiom so let's add a helper ksft_test_result_report()
which translates into the relevant report types.
Due to the use of va_args in the result reporting functions this is done as
a macro rather than an inline function as one might expect, none of the
alternatives looked particularly great.
Resolved merge conflict in next betwwen the following commits:
f7d5bcd35d ("selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn")
5d3a9274f0d1 ("kselftest: Add mechanism for reporting a KSFT_ result code")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')
For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
Patch series "test_xarray: couple of fixes for v6-9-rc6", v2.
Here are a couple of fixes which should be merged into the queue for
v6.9-rc6. The first one was reported by Liam, after fixing that I noticed
an issue with a test, and a fix for that is in the second patch.
This patch (of 2):
Liam reported that compiling the test_xarray on userspace was broken. I
was not even aware that was possible but you can via and you can run these
tests in userspace with:
make -C tools/testing/radix-tree
./tools/testing/radix-tree/xarray
Add the two helpers we need to fix compilation. We don't need a userspace
schedule() so just make it do nothing.
Link: https://lkml.kernel.org/r/20240423192221.301095-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240423192221.301095-2-mcgrof@kernel.org
Fixes: a60cc288a1 ("test_xarray: add tests for advanced multi-index use")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang generates warning here, because struct cpu_hogger has multiple
fields, and the code is initializing an array of these structs, and it
is incorrect to specify a single NULL value as the initializer.
Fix this by initializing with {}, so that the compiler knows to use
default initializer values for all fields in each array entry.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang is pickier than gcc, about which version of abs(3) to call,
depending on the argument type:
int abs(int j);
long labs(long j);
long long llabs(long long j);
...and this is causing both build failures and warnings, when running:
make LLVM=1 -C tools/testing/selftests
Fix this by calling labs() in value_close(), because the arguments are
unambiguously "long" type.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
The hashchk tests want to verify that the hash key is changed over exec.
It does so by calculating hashes at the same address across an exec.
This is made simpler by disabling PIE functionality, so we can
re-execute ourselves and be using the same addresses in the child.
While -fno-pie is already added, -no-pie is also required.
Fixes: bdb07f35a5 ("selftests/powerpc/dexcr: Add hashst/hashchk test")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-2-bgray@linux.ibm.com
Detect packets with ip_summed CHECKSUM_PARTIAL and skip these. These
should not exist, as the test sends individual packets between two
hosts. But if (HW) GRO is on, with randomized content sometimes
subsequent packets can be coalesced.
In this case the GSO packet checksum is converted to a pseudo checksum
in anticipation of sending out as TSO/USO. So the field will not match
the expected value.
Do not count these as test errors.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240501193156.3627344-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're a bit too loose with error checking for background
processes. cmd() completely ignores the fail argument
passed to the constructor if background is True.
Default to checking for errors if process is not terminated
explicitly. Caller can override with True / False.
For bkg() the processing step is called magically by __exit__
so record the value passed in the constructor.
Reported-by: Willem de Bruijn <willemb@google.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240502025325.1924923-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new arguments for cong_control of struct
tcp_congestion_ops:
- ack
- flag
These two arguments are inherited from the caller tcp_cong_control in
tcp_intput.c. One use case of them is to update cwnd and pacing rate
inside cong_control based on the info they provide. For example, the
flag can be used to decide if it is the right time to raise or reduce a
sender's cwnd.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-2-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The rseq test's migration worker delays 1-10 us, assuming that one KVM_RUN
iteration only takes a few microseconds. But if the CPU low power wakeup
latency is large enough, for example, hundreds or even thousands of
microseconds for deep C-state exit latencies on x86 server CPUs, it may
happen that the target CPU is unable to wakeup and run the vCPU before the
migration worker starts to migrate the vCPU thread to the _next_ CPU.
If the system workload is light, most CPUs could be at a certain low
power state, which may result in less successful migrations and fail the
migration/KVM_RUN ratio sanity check. But this is not supposed to be
deemed a test failure.
Add a command line option to skip the sanity check, along with a comment
and a verbose assert message to try to help the user resolve the potential
source of failures without having to resort to disabling the check.
Co-developed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Signed-off-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Link: https://lore.kernel.org/r/20240502213936.27619-1-zide.chen@intel.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
This patch creates two sets of sock_ops that call out to the SYSCALL
hooks in the sock_addr_kern BPF program and uses them to construct
test cases for the range of supported operations (kernel_connect(),
kernel_bind(), kernel_sendms(), sock_sendmsg(), kernel_getsockname(),
kenel_getpeername()). This ensures that these interact with BPF sockaddr
hooks as intended.
Beyond this it also ensures that these operations do not modify their
address parameter, providing regression coverage for the issues
addressed by this set of patches:
- commit 0bdf399342c5("net: Avoid address overwrite in kernel_connect")
- commit 86a7e0b69bd5("net: prevent rewrite of msg_name in sock_sendmsg()")
- commit c889a99a21bf("net: prevent address rewrite in kernel_bind()")
- commit 01b2885d9415("net: Save and restore msg_namelen in sock_sendmsg")
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-7-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In order to reuse the same test code for both socket system calls (e.g.
connect(), bind(), etc.) and kernel socket functions (e.g.
kernel_connect(), kernel_bind(), etc.), this patch introduces the "ops"
field to sock_addr_test. This field allows each test cases to configure
the set of functions used in the test case to create, manipulate, and
tear down a socket.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-6-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
