BPF stream kfuncs need to be non-sleeping as they can be called from
programs running in any context, this requires a way to allocate memory
from any context. Currently, this is done by a custom per-CPU NMI-safe
bump allocation mechanism, backed by alloc_pages_nolock() and
free_pages_nolock() primitives.
As kmalloc_nolock() and kfree_nolock() primitives are available now, the
custom allocator can be removed in favor of these.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251023161448.4263-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Disable propagation and unwinding of the waiter queue in case the head
waiter detects a deadlock condition, but keep it enabled in case of the
timeout fallback.
Currently, when the head waiter experiences an AA deadlock, it will
signal all its successors in the queue to exit with an error. This is
not ideal for cases where the same lock is held in contexts which can
cause errors in an unrestricted fashion (e.g., BPF programs, or kernel
paths invoked through BPF programs), and core kernel logic which is
written in a correct fashion and does not expect deadlocks.
The same reasoning can be extended to ABBA situations. Depending on the
actual runtime schedule, one or both of the head waiters involved in an
ABBA situation can detect and exit directly without terminating their
waiter queue. If the ABBA situation manifests again, the waiters will
keep exiting until progress can be made, or a timeout is triggered in
case of more complicated locking dependencies.
We still preserve the queue destruction in case of timeouts, as either
the locking dependencies are too complex to be captured by AA and ABBA
heuristics, or the owner is perpetually stuck. As such, it would be
unwise to continue to apply the timeout for each new head waiter without
terminating the queue, since we may end up waiting for more than 250 ms
in aggregate with all participants in the locking transaction.
The patch itself is fairly simple; we can simply signal our successor to
become the next head waiter, and leave the queue without attempting to
acquire the lock.
With this change, the behavior for waiters in case of deadlocks
experienced by a predecessor changes. It is guaranteed that call sites
will no longer receive errors if the predecessors encounter deadlocks
and the successors do not participate in one. This should lower the
failure rate for waiters that are not doing improper locking opreations,
just because they were unlucky to queue behind a misbehaving waiter.
However, timeouts are still a possibility, hence they must be accounted
for, so users cannot rely upon errors not occuring at all.
Suggested-by: Amery Hung <ameryhung@gmail.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251029181828.231529-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract the duplicated maximum allowed depth computation for stack
traces stored in BPF stacks from bpf_get_stackid() and __bpf_get_stack()
into a dedicated stack_map_calculate_max_depth() helper function.
This unifies the logic for:
- The max depth computation
- Enforcing the sysctl_perf_event_max_stack limit
No functional changes for existing code paths.
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20251025192858.31424-1-contact@arnaud-lcm.com
File dynptr reads may sleep when the requested folios are not in
the page cache. To avoid sleeping in non-sleepable contexts while still
supporting valid sleepable use, given that dynptrs are non-sleepable by
default, enable sleeping only when bpf_dynptr_from_file() is invoked
from a sleepable context.
This change:
* Introduces a sleepable constructor: bpf_dynptr_from_file_sleepable()
* Override non-sleepable constructor with sleepable if it's always
called in sleepable context
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move kfunc specialization (function address substitution) to later stage
of verification to support a new use case, where we need to take into
consideration whether kfunc is called in sleepable context.
Minor refactoring in add_kfunc_call(), making sure that if function
fails, kfunc desc is not added to tab->descs (previously it could be
added or not, depending on what failed).
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-9-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for file dynptr.
Introduce struct bpf_dynptr_file_impl to hold internal state for file
dynptrs, with 64-bit size and offset support.
Introduce lifecycle management kfuncs:
- bpf_dynptr_from_file() for initialization
- bpf_dynptr_file_discard() for destruction
Extend existing helpers to support file dynptrs in:
- bpf_dynptr_read()
- bpf_dynptr_slice()
Write helpers (bpf_dynptr_write() and bpf_dynptr_data()) are not
modified, as file dynptr is read-only.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-8-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the necessary verifier plumbing for the new file-backed dynptr type.
Introduce two kfuncs for its lifecycle management:
* bpf_dynptr_from_file() for initialization
* bpf_dynptr_file_discard() for destruction
Currently there is no mechanism for kfunc to release dynptr, this patch
add one:
* Dynptr release function sets meta->release_regno
* Call unmark_stack_slots_dynptr() if meta->release_regno is set and
dynptr ref_obj_id is set as well.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-7-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_insn_successors() function is used to return successors
to a BPF instruction. So far, an instruction could have 0, 1 or 2
successors. Prepare the verifier code to introduction of instructions
with more than 2 successors (namely, indirect jumps).
To do this, introduce a new struct, struct bpf_iarray, containing
an array of bpf instruction indexes and make bpf_insn_successors
to return a pointer of that type. The storage for all instructions
is allocated in the env->succ, which holds an array of size 2,
to be used for all instructions.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-10-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kernel/bpf/array.c file defines the array_map_get_next_key()
function which finds the next key for array maps. It actually doesn't
use any map fields besides the generic max_entries field. Generalize
it, and export as bpf_array_get_next_key() such that it can be
re-used by other array-like maps.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a new subprog_start field in bpf_prog_aux. This field may
be used by JIT compilers wanting to know the real absolute xlated
offset of the function being jitted. The func_info[func_id] may have
served this purpose, but func_info may be NULL, so JIT compilers
can't rely on it.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
propagate_to_outer_instance() calls get_outer_instance() and uses the
returned pointer to reset and commit stack write marks. Under normal
conditions, update_instance() guarantees that an outer instance exists,
so get_outer_instance() cannot return an ERR_PTR.
However, explicitly checking for IS_ERR(outer_instance) makes this code
more robust and self-documenting. It reduces cognitive load when reading
the control flow and silences potential false-positive reports from
static analysis or automated tooling.
No functional change intended.
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251021080849.860072-1-shardulsb08@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The vma->vm_mm might be NULL and it can be accessed outside of RCU. Thus,
we can mark it as trusted_or_null. With this change, BPF helpers can safely
access vma->vm_mm to retrieve the associated mm_struct from the VMA.
Then we can make policy decision from the VMA.
The "trusted" annotation enables direct access to vma->vm_mm within kfuncs
marked with KF_TRUSTED_ARGS or KF_RCU, such as bpf_task_get_cgroup1() and
bpf_task_under_cgroup(). Conversely, "null" enforcement requires all
callsites using vma->vm_mm to perform NULL checks.
The lsm selftest must be modified because it directly accesses vma->vm_mm
without a NULL pointer check; otherwise it will break due to this
change.
For the VMA based THP policy, the use case is as follows,
@mm = @vma->vm_mm; // vm_area_struct::vm_mm is trusted or null
if (!@mm)
return;
bpf_rcu_read_lock(); // rcu lock must be held to dereference the owner
@owner = @mm->owner; // mm_struct::owner is rcu trusted or null
if (!@owner)
goto out;
@cgroup1 = bpf_task_get_cgroup1(@owner, MEMCG_HIERARCHY_ID);
/* make the decision based on the @cgroup1 attribute */
bpf_cgroup_release(@cgroup1); // release the associated cgroup
out:
bpf_rcu_read_unlock();
PSI memory information can be obtained from the associated cgroup to inform
policy decisions. Since upstream PSI support is currently limited to cgroup
v2, the following example demonstrates cgroup v2 implementation:
@owner = @mm->owner;
if (@owner) {
// @ancestor_cgid is user-configured
@ancestor = bpf_cgroup_from_id(@ancestor_cgid);
if (bpf_task_under_cgroup(@owner, @ancestor)) {
@psi_group = @ancestor->psi;
/* Extract PSI metrics from @psi_group and
* implement policy logic based on the values
*/
}
}
The vma::vm_file can also be marked with __safe_trusted_or_null.
No additional selftests are required since vma->vm_file and vma->vm_mm are
already validated in the existing selftest suite.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20251016063929.13830-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When CONFIG_MEMCG is enabled, we can access mm->owner under RCU. The
owner can be NULL. With this change, BPF helpers can safely access
mm->owner to retrieve the associated task from the mm. We can then make
policy decision based on the task attribute.
The typical use case is as follows,
bpf_rcu_read_lock(); // rcu lock must be held for rcu trusted field
@owner = @mm->owner; // mm_struct::owner is rcu trusted or null
if (!@owner)
goto out;
/* Do something based on the task attribute */
out:
bpf_rcu_read_unlock();
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20251016063929.13830-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When __lookup_instance() allocates a func_instance structure but fails
to allocate the must_write_set array, it returns an error without freeing
the previously allocated func_instance. This causes a memory leak of 192
bytes (sizeof(struct func_instance)) each time this error path is triggered.
Fix by freeing 'result' on must_write_set allocation failure.
Fixes: b3698c356a ("bpf: callchain sensitive stack liveness tracking using CFG")
Reported-by: BPF Runtime Fuzzer (BRF)
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20251016063330.4107547-1-shardulsb08@gmail.com
The following kmemleak splat:
[ 8.105530] kmemleak: Trying to color unknown object at 0xff11000100e918c0 as Black
[ 8.106521] Call Trace:
[ 8.106521] <TASK>
[ 8.106521] dump_stack_lvl+0x4b/0x70
[ 8.106521] kvfree_call_rcu+0xcb/0x3b0
[ 8.106521] ? hrtimer_cancel+0x21/0x40
[ 8.106521] bpf_obj_free_fields+0x193/0x200
[ 8.106521] htab_map_update_elem+0x29c/0x410
[ 8.106521] bpf_prog_cfc8cd0f42c04044_overwrite_cb+0x47/0x4b
[ 8.106521] bpf_prog_8c30cd7c4db2e963_overwrite_timer+0x65/0x86
[ 8.106521] bpf_prog_test_run_syscall+0xe1/0x2a0
happens due to the combination of features and fixes, but mainly due to
commit 6d78b4473c ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
It's using __GFP_HIGH, which instructs slub/kmemleak internals to skip
kmemleak_alloc_recursive() on allocation, so subsequent kfree_rcu()->
kvfree_call_rcu()->kmemleak_ignore() complains with the above splat.
To fix this imbalance, replace bpf_map_kmalloc_node() with
kmalloc_nolock() and kfree_rcu() with call_rcu() + kfree_nolock() to
make sure that the objects allocated with kmalloc_nolock() are freed
with kfree_nolock() rather than the implicit kfree() that kfree_rcu()
uses internally.
Note, the kmalloc_nolock() happens under bpf_spin_lock_irqsave(), so
it will always fail in PREEMPT_RT. This is not an issue at the moment,
since bpf_timers are disabled in PREEMPT_RT. In the future
bpf_spin_lock will be replaced with state machine similar to
bpf_task_work.
Fixes: 6d78b4473c ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/bpf/20251015000700.28988-1-alexei.starovoitov@gmail.com
The arraymap and hashtab duplicate the logic that checks for and frees
internal structs (timer, workqueue, task_work) based on
BTF record flags. Centralize this by introducing two helpers:
* bpf_map_has_internal_structs(map)
Returns true if the map value contains any of internal structs:
BPF_TIMER | BPF_WORKQUEUE | BPF_TASK_WORK.
* bpf_map_free_internal_structs(map, obj)
Frees the internal structs for a single value object.
Convert arraymap and both the prealloc/malloc hashtab paths to use the
new generic functions. This keeps the functionality for when/how to free
these special fields in one place and makes it easier to add support for
new internal structs in the future without touching every map
implementation.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251010164606.147298-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When unpinning a BPF hash table (htab or htab_lru) that contains internal
structures (timer, workqueue, or task_work) in its values, a BUG warning
is triggered:
BUG: sleeping function called from invalid context at kernel/bpf/hashtab.c:244
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
...
The issue arises from the interaction between BPF object unpinning and
RCU callback mechanisms:
1. BPF object unpinning uses ->free_inode() which schedules cleanup via
call_rcu(), deferring the actual freeing to an RCU callback that
executes within the RCU_SOFTIRQ context.
2. During cleanup of hash tables containing internal structures,
htab_map_free_internal_structs() is invoked, which includes
cond_resched() or cond_resched_rcu() calls to yield the CPU during
potentially long operations.
However, cond_resched() or cond_resched_rcu() cannot be safely called from
atomic RCU softirq context, leading to the BUG warning when attempting
to reschedule.
Fix this by changing from ->free_inode() to ->destroy_inode() and rename
bpf_free_inode() to bpf_destroy_inode() for BPF objects (prog, map, link).
This allows direct inode freeing without RCU callback scheduling,
avoiding the invalid context warning.
Reported-by: Le Chen <tom2cat@sjtu.edu.cn>
Closes: https://lore.kernel.org/all/1444123482.1827743.1750996347470.JavaMail.zimbra@sjtu.edu.cn/
Fixes: 68134668c1 ("bpf: Add map side support for bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251008102628.808045-2-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rename the storage_get_func_atomic flag to a more generic non_sleepable
flag that tracks whether a helper or kfunc may be called from a
non-sleepable context. This makes the flag more broadly applicable
beyond just storage_get helpers. See [0] for more context.
The flag is now set unconditionally for all helpers and kfuncs when:
- RCU critical section is active.
- Preemption is disabled.
- IRQs are disabled.
- In a non-sleepable context within a sleepable program (e.g., timer
callbacks), which is indicated by !in_sleepable().
Previously, the flag was only set for storage_get helpers in these
contexts. With this change, it can be used by any code that needs to
differentiate between sleepable and non-sleepable contexts at the
per-instruction level.
The existing usage in do_misc_fixups() for storage_get helpers is
preserved by checking is_storage_get_function() before using the flag.
[0]: https://lore.kernel.org/bpf/CAP01T76cbaNi4p-y8E0sjE2NXSra2S=Uja8G4hSQDu_SbXxREQ@mail.gmail.com
Cc: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/r/20251007220349.3852807-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix the BPF verifier to correctly determine the sleepable context of
async callbacks based on the async primitive type rather than the arming
program's context.
The bug is in in_sleepable() which uses OR logic to check if the current
execution context is sleepable. When a sleepable program arms a timer
callback, the callback's state correctly has in_sleepable=false, but
in_sleepable() would still return true due to env->prog->sleepable being
true. This incorrectly allows sleepable helpers like
bpf_copy_from_user() inside timer callbacks when armed from sleepable
programs, even though timer callbacks always execute in non-sleepable
context.
Fix in_sleepable() to rely solely on env->cur_state->in_sleepable, and
initialize state->in_sleepable to env->prog->sleepable in
do_check_common() for the main program entry. This ensures the sleepable
context is properly tracked per verification state rather than being
overridden by the program's sleepability.
The env->cur_state NULL check in in_sleepable() was only needed for
do_misc_fixups() which runs after verification when env->cur_state is
set to NULL. Update do_misc_fixups() to use env->prog->sleepable
directly for the storage_get_function check, and remove the redundant
NULL check from in_sleepable().
Introduce is_async_cb_sleepable() helper to explicitly determine async
callback sleepability based on the primitive type:
- bpf_timer callbacks are never sleepable
- bpf_wq and bpf_task_work callbacks are always sleepable
Add verifier_bug() check to catch unhandled async callback types,
ensuring future additions cannot be silently mishandled. Move the
is_task_work_add_kfunc() forward declaration to the top alongside other
callback-related helpers. We update push_async_cb() to adjust to the new
changes.
At the same time, while simplifying in_sleepable(), we notice a problem
in do_misc_fixups. Fix storage_get helpers to use GFP_ATOMIC when called
from non-sleepable contexts within sleepable programs, such as bpf_timer
callbacks.
Currently, the check in do_misc_fixups assumes that env->prog->sleepable,
previously in_sleepable(env) which only resolved to this check before
last commit, holds across the program's execution, but that is not true.
Instead, the func_atomic bit must be set whenever we see the function
being called in an atomic context. Previously, this is being done when
the helper is invoked in atomic contexts in sleepable programs, we can
simply just set the value to true without doing an in_sleepable() check.
We must also do a standalone in_sleepable() check to handle cases where
the async callback itself is armed from a sleepable program, but is
itself non-sleepable (e.g., timer callback) and invokes such a helper,
thus needing the func_atomic bit to be true for the said call.
Adjust do_misc_fixups() to drop any checks regarding sleepable nature of
the program, and just depend on the func_atomic bit to decide which GFP
flag to pass.
Fixes: 81f1d7a583 ("bpf: wq: add bpf_wq_set_callback_impl")
Fixes: b00fa38a9c ("bpf: Enable non-atomic allocations in local storage")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251007220349.3852807-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix selftests/bpf (typo, conflicts) and unbreak BPF CI (Jiri Olsa)
- Remove linux/unaligned.h dependency for libbpf_sha256 (Andrii
Nakryiko) and add a test (Eric Biggers)
- Reject negative offsets for ALU operations in the verifier (Yazhou
Tang) and add a test (Eduard Zingerman)
- Skip scalar adjustment for BPF_NEG operation if destination register
is a pointer (Brahmajit Das) and add a test (KaFai Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: Fix missing #pragma in libbpf_utils.c
selftests/bpf: Add tests for rejection of ALU ops with negative offsets
selftests/bpf: Add test for libbpf_sha256()
bpf: Reject negative offsets for ALU ops
libbpf: remove linux/unaligned.h dependency for libbpf_sha256()
libbpf: move libbpf_sha256() implementation into libbpf_utils.c
libbpf: move libbpf_errstr() into libbpf_utils.c
libbpf: remove unused libbpf_strerror_r and STRERR_BUFSIZE
libbpf: make libbpf_errno.c into more generic libbpf_utils.c
selftests/bpf: Add test for BPF_NEG alu on CONST_PTR_TO_MAP
bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer
selftests/bpf: Fix realloc size in bpf_get_addrs
selftests/bpf: Fix typo in subtest_basic_usdt after merge conflict
selftests/bpf: Fix open-coded gettid syscall in uprobe syscall tests
Pull slab updates from Vlastimil Babka:
- A new layer for caching objects for allocation and free via percpu
arrays called sheaves.
The aim is to combine the good parts of SLAB (lower-overhead and
simpler percpu caching, compared to SLUB) without the past issues
with arrays for freeing remote NUMA node objects and their flushing.
It also allows more efficient kfree_rcu(), and cheaper object
preallocations for cases where the exact number of objects is
unknown, but an upper bound is.
Currently VMAs and maple nodes are using this new caching, with a
plan to enable it for all caches and remove the complex SLUB fastpath
based on cpu (partial) slabs and this_cpu_cmpxchg_double().
(Vlastimil Babka, with Liam Howlett and Pedro Falcato for the maple
tree changes)
- Re-entrant kmalloc_nolock(), which allows opportunistic allocations
from NMI and tracing/kprobe contexts.
Building on prior page allocator and memcg changes, it will result in
removing BPF-specific caches on top of slab (Alexei Starovoitov)
- Various fixes and cleanups. (Kuan-Wei Chiu, Matthew Wilcox, Suren
Baghdasaryan, Ye Liu)
* tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (40 commits)
slab: Introduce kmalloc_nolock() and kfree_nolock().
slab: Reuse first bit for OBJEXTS_ALLOC_FAIL
slab: Make slub local_(try)lock more precise for LOCKDEP
mm: Introduce alloc_frozen_pages_nolock()
mm: Allow GFP_ACCOUNT to be used in alloc_pages_nolock().
locking/local_lock: Introduce local_lock_is_locked().
maple_tree: Convert forking to use the sheaf interface
maple_tree: Add single node allocation support to maple state
maple_tree: Prefilled sheaf conversion and testing
tools/testing: Add support for prefilled slab sheafs
maple_tree: Replace mt_free_one() with kfree()
maple_tree: Use kfree_rcu in ma_free_rcu
testing/radix-tree/maple: Hack around kfree_rcu not existing
tools/testing: include maple-shim.c in maple.c
maple_tree: use percpu sheaves for maple_node_cache
mm, vma: use percpu sheaves for vm_area_struct cache
tools/testing: Add support for changes to slab for sheaves
slab: allow NUMA restricted allocations to use percpu sheaves
tools/testing/vma: Implement vm_refcnt reset
slab: skip percpu sheaves for remote object freeing
...
When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.
The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).
This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs.
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Fixes: ec0e2da95f ("bpf: Support new signed div/mod instructions.")
Link: https://lore.kernel.org/r/tencent_70D024BAE70A0A309A4781694C7B764B0608@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This is in
reaction to the recently fixed refcount bugs, which could have been
detected earlier and could have mitigated the bug somewhat (Thomas
Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation for
sframes (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which gives a
substantial speedup (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver (Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)"
* tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
selftests/bpf: Fix uprobe_sigill test for uprobe syscall error value
uprobes/x86: Return error from uprobe syscall when not called from trampoline
perf: Skip user unwind if the task is a kernel thread
perf: Simplify get_perf_callchain() user logic
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
perf: Have get_perf_callchain() return NULL if crosstask and user are set
perf: Remove get_perf_callchain() init_nr argument
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
perf/x86/intel: Use early_initcall() to hook bts_init()
uprobes: Remove redundant __GFP_NOWARN
selftests/seccomp: validate uprobe syscall passes through seccomp
seccomp: passthrough uprobe systemcall without filtering
selftests/bpf: Fix uprobe syscall shadow stack test
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
selftests/bpf: Add uprobe_regs_equal test
selftests/bpf: Add optimized usdt variant for basic usdt test
...
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
Pull vfs async directory updates from Christian Brauner:
"This contains further preparatory changes for the asynchronous directory
locking scheme:
- Add lookup_one_positive_killable() which allows overlayfs to
perform lookup that won't block on a fatal signal
- Unify the mount idmap handling in struct renamedata as a rename can
only happen within a single mount
- Introduce kern_path_parent() for audit which sets the path to the
parent and returns a dentry for the target without holding any
locks on return
- Rename kern_path_locked() as it is only used to prepare for the
removal of an object from the filesystem:
kern_path_locked() => start_removing_path()
kern_path_create() => start_creating_path()
user_path_create() => start_creating_user_path()
user_path_locked_at() => start_removing_user_path_at()
done_path_create() => end_creating_path()
NA => end_removing_path()"
* tag 'vfs-6.18-rc1.async' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
debugfs: rename start_creating() to debugfs_start_creating()
VFS: rename kern_path_locked() and related functions.
VFS/audit: introduce kern_path_parent() for audit
VFS: unify old_mnt_idmap and new_mnt_idmap in renamedata
VFS: discard err2 in filename_create()
VFS/ovl: add lookup_one_positive_killable()
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
Change alloc_pages_nolock() to default to __GFP_COMP when allocating
pages, since upcoming reentrant alloc_slab_page() needs __GFP_COMP.
Also allow __GFP_ACCOUNT flag to be specified,
since most of BPF infra needs __GFP_ACCOUNT except BPF streams.
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The stacktrace map can be easily full, which will lead to failure in
obtaining the stack. In addition to increasing the size of the map,
another solution is to delete the stack_id after looking it up from
the user, so extend the existing bpf_map_lookup_and_delete_elem()
functionality to stacktrace map types.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925175030.1615837-1-chen.dylane@linux.dev
For now, migrate_enable and migrate_disable are global, which makes them
become hotspots in some case. Take BPF for example, the function calling
to migrate_enable and migrate_disable in BPF trampoline can introduce
significant overhead, and following is the 'perf top' of FENTRY's
benchmark (./tools/testing/selftests/bpf/bench trig-fentry):
54.63% bpf_prog_2dcccf652aac1793_bench_trigger_fentry [k]
bpf_prog_2dcccf652aac1793_bench_trigger_fentry
10.43% [kernel] [k] migrate_enable
10.07% bpf_trampoline_6442517037 [k] bpf_trampoline_6442517037
8.06% [kernel] [k] __bpf_prog_exit_recur
4.11% libc.so.6 [.] syscall
2.15% [kernel] [k] entry_SYSCALL_64
1.48% [kernel] [k] memchr_inv
1.32% [kernel] [k] fput
1.16% [kernel] [k] _copy_to_user
0.73% [kernel] [k] bpf_prog_test_run_raw_tp
So in this commit, we make migrate_enable/migrate_disable inline to obtain
better performance. The struct rq is defined internally in
kernel/sched/sched.h, and the field "nr_pinned" is accessed in
migrate_enable/migrate_disable, which makes it hard to make them inline.
Alexei Starovoitov suggests to generate the offset of "nr_pinned" in [1],
so we can define the migrate_enable/migrate_disable in
include/linux/sched.h and access "this_rq()->nr_pinned" with
"(void *)this_rq() + RQ_nr_pinned".
The offset of "nr_pinned" is generated in include/generated/rq-offsets.h
by kernel/sched/rq-offsets.c.
Generally speaking, we move the definition of migrate_enable and
migrate_disable to include/linux/sched.h from kernel/sched/core.c. The
calling to __set_cpus_allowed_ptr() is leaved in ___migrate_enable().
The "struct rq" is not available in include/linux/sched.h, so we can't
access the "runqueues" with this_cpu_ptr(), as the compilation will fail
in this_cpu_ptr() -> raw_cpu_ptr() -> __verify_pcpu_ptr():
typeof((ptr) + 0)
So we introduce the this_rq_raw() and access the runqueues with
arch_raw_cpu_ptr/PERCPU_PTR directly.
The variable "runqueues" is not visible in the kernel modules, and export
it is not a good idea. As Peter Zijlstra advised in [2], we define and
export migrate_enable/migrate_disable in kernel/sched/core.c too, and use
them for the modules.
Before this patch, the performance of BPF FENTRY is:
fentry : 113.030 ± 0.149M/s
fentry : 112.501 ± 0.187M/s
fentry : 112.828 ± 0.267M/s
fentry : 115.287 ± 0.241M/s
After this patch, the performance of BPF FENTRY increases to:
fentry : 143.644 ± 0.670M/s
fentry : 149.764 ± 0.362M/s
fentry : 149.642 ± 0.156M/s
fentry : 145.263 ± 0.221M/s
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/CAADnVQ+5sEDKHdsJY5ZsfGDO_1SEhhQWHrt2SMBG5SYyQ+jt7w@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/20250819123214.GH4067720@noisy.programming.kicks-ass.net/ [2]
Currently, functions with 'union' arguments cannot be traced with
fentry/fexit:
bpftrace -e 'fentry:release_pages { exit(); }' -v
The function release_pages arg0 type UNION is unsupported.
The type of the 'release_pages' arg0 is defined as:
typedef union {
struct page **pages;
struct folio **folios;
struct encoded_page **encoded_pages;
} release_pages_arg __attribute__ ((__transparent_union__));
This patch relaxes the restriction by allowing function arguments of type
'union' to be traced in verifier.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250919044110.23729-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, signed load instructions into arena memory are unsupported.
The compiler is free to generate these, and on GCC-14 we see a
corresponding error when it happens. The hurdle in supporting them is
deciding which unused opcode to use to mark them for the JIT's own
consumption. After much thinking, it appears 0xc0 / BPF_NOSPEC can be
combined with load instructions to identify signed arena loads. Use
this to recognize and JIT them appropriately, and remove the verifier
side limitation on the program if the JIT supports them.
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250923110157.18326-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implementation of the new bpf_task_work_schedule kfuncs, that let a BPF
program schedule task_work callbacks for a target task:
* bpf_task_work_schedule_signal() - schedules with TWA_SIGNAL
* bpf_task_work_schedule_resume() - schedules with TWA_RESUME
Each map value should embed a struct bpf_task_work, which the kernel
side pairs with struct bpf_task_work_kern, containing a pointer to
struct bpf_task_work_ctx, that maintains metadata relevant for the
concrete callback scheduling.
A small state machine and refcounting scheme ensures safe reuse and
teardown. State transitions:
_______________________________
| |
v |
[standby] ---> [pending] --> [scheduling] --> [scheduled]
^ |________________|_________
| |
| v
| [running]
|_______________________________________________________|
All states may transition into FREED state:
[pending] [scheduling] [scheduled] [running] [standby] -> [freed]
A FREED terminal state coordinates with map-value
deletion (bpf_task_work_cancel_and_free()).
Scheduling itself is deferred via irq_work to keep the kfunc callable
from NMI context.
Lifetime is guarded with refcount_t + RCU Tasks Trace.
Main components:
* struct bpf_task_work_context – Metadata and state management per task
work.
* enum bpf_task_work_state – A state machine to serialize work
scheduling and execution.
* bpf_task_work_schedule() – The central helper that initiates
scheduling.
* bpf_task_work_acquire_ctx() - Attempts to take ownership of the context,
pointed by passed struct bpf_task_work, allocates new context if none
exists yet.
* bpf_task_work_callback() – Invoked when the actual task_work runs.
* bpf_task_work_irq() – An intermediate step (runs in softirq context)
to enqueue task work.
* bpf_task_work_cancel_and_free() – Cleanup for deleted BPF map entries.
Flow of successful task work scheduling
1) bpf_task_work_schedule_* is called from BPF code.
2) Transition state from STANDBY to PENDING, mark context as owned by
this task work scheduler
3) irq_work_queue() schedules bpf_task_work_irq().
4) Transition state from PENDING to SCHEDULING (noop if transition
successful)
5) bpf_task_work_irq() attempts task_work_add(). If successful, state
transitions to SCHEDULED.
6) Task work calls bpf_task_work_callback(), which transition state to
RUNNING.
7) BPF callback is executed
8) Context is cleaned up, refcounts released, context state set back to
STANDBY.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250923112404.668720-8-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds necessary plumbing in verifier, syscall and maps to
support handling new kfunc bpf_task_work_schedule and kernel structure
bpf_task_work. The idea is similar to how we already handle bpf_wq and
bpf_timer.
verifier changes validate calls to bpf_task_work_schedule to make sure
it is safe and expected invariants hold.
btf part is required to detect bpf_task_work structure inside map value
and store its offset, which will be used in the next patch to calculate
key and value addresses.
arraymap and hashtab changes are needed to handle freeing of the
bpf_task_work: run code needed to deinitialize it, for example cancel
task_work callback if possible.
The use of bpf_task_work and proper implementation for kfuncs are
introduced in the next patch.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250923112404.668720-6-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
