A recent commit introduced these compile warnings:
CC drivers/iommu/amd/init.o
drivers/iommu/amd/init.c:938:12: error: ‘iommu_init_ga_log’ defined but not used [-Werror=unused-function]
938 | static int iommu_init_ga_log(struct amd_iommu *iommu)
| ^~~~~~~~~~~~~~~~~
drivers/iommu/amd/init.c:902:12: error: ‘iommu_ga_log_enable’ defined but not used [-Werror=unused-function]
902 | static int iommu_ga_log_enable(struct amd_iommu *iommu)
| ^~~~~~~~~~~~~~~~~~~
The warnings appear because both functions are defined when IRQ
remapping is not enabled, but only used when IRQ remapping is enabled.
Fix it by only defining the functions when IRQ remapping is enabled.
Fixes: c5e1a1eb92 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220729100432.22474-1-joro@8bytes.org
Once SNP is enabled (by executing SNP_INIT command), IOMMU can no longer
support the passthrough domain (i.e. IOMMU_DOMAIN_IDENTITY).
The SNP_INIT command is called early in the boot process, and would fail
if the kernel is configure to default to passthrough mode.
After the system is already booted, users can try to change IOMMU domain
type of a particular IOMMU group. In this case, the IOMMU driver needs to
check the SNP-enable status and return failure when requesting to change
domain type to identity.
Therefore, return failure when trying to allocate identity domain.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-9-suravee.suthikulpanit@amd.com
[ joro: Removed WARN_ON_ONCE() ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On AMD system with SNP enabled, IOMMU hardware checks the host translation
valid (TV) and guest translation valid (GV) bits in the device table entry
(DTE) before accessing the corresponded page tables.
However, current IOMMU driver sets the TV bit for all devices regardless
of whether the host page table is in use. This results in
ILLEGAL_DEV_TABLE_ENTRY event for devices, which do not the host page
table root pointer set up.
Thefore, when SNP is enabled, only set TV bit when DMA remapping is not
used, which is when domain ID in the AMD IOMMU device table entry (DTE)
is zero.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-8-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support SNP, IOMMU needs to be enabled, and prohibits IOMMU
configurations where DTE[Mode]=0, which means it cannot be supported with
IOMMU passthrough domain (a.k.a IOMMU_DOMAIN_IDENTITY),
and when AMD IOMMU driver is configured to not use the IOMMU host (v1) page
table. Otherwise, RMP table initialization could cause the system to crash.
The request to enable SNP support in IOMMU must be done before PCI
initialization state of the IOMMU driver because enabling SNP affects
how IOMMU driver sets up IOMMU data structures (i.e. DTE).
Unlike other IOMMU features, SNP feature does not have an enable bit in
the IOMMU control register. Instead, the IOMMU driver introduces
an amd_iommu_snp_en variable to track enabling state of SNP.
Introduce amd_iommu_snp_enable() for other drivers to request enabling
the SNP support in IOMMU, which checks all prerequisites and determines
if the feature can be safely enabled.
Please see the IOMMU spec section 2.12 for further details.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-7-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The ACPI IVRS table can contain multiple IVHD blocks. Each block contains
information used to initialize each IOMMU instance.
Currently, init_iommu_all sequentially process IVHD block and initialize
IOMMU instance one-by-one. However, certain features require all IOMMUs
to be configured in the same way system-wide. In case certain IVHD blocks
contain inconsistent information (most likely FW bugs), the driver needs
to go through and try to revert settings on IOMMUs that have already been
configured.
A solution is to split IOMMU initialization into 3 phases:
Phase1 : Processes information of the IVRS table for all IOMMU instances.
This allow all IVHDs to be processed prior to enabling features.
Phase2 : Early feature support check on all IOMMUs (using information in
IVHD blocks.
Phase3 : Iterates through all IOMMU instances and enabling features.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-5-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some IOMMU features require that all IOMMUs must support the feature,
which is determined by checking the support bit in the Extended Feature
Register 1 and 2 (EFR/EFR2) on all IOMMUs. This check is done by the
function check_feature_on_all_iommus(), which iterates through all
IOMMUs everytime it is called.
Instead, introduce a global variable to store common EFR/EFR2 among all
IOMMUs. In case of inconsistent EFR/EFR2 masks are detected on an IOMMU,
a FW_BUG warning is reported.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current code uses global "amd_iommu_last_bdf" to track the last bdf
supported by the system. This value is used for various memory
allocation, device data flushing, etc.
Introduce per PCI segment last_bdf which will be used to track last bdf
supported by the given PCI segment and use this value for all per
segment memory allocations. Eventually it will replace global
"amd_iommu_last_bdf".
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Newer AMD systems can support multiple PCI segments. In order to support
multiple PCI segments IVMD table in IVRS structure is enhanced to
include pci segment id. Update ivmd_header structure to include "pci_seg".
Also introduce per PCI segment unity map list. It will replace global
amd_iommu_unity_map list.
Note that we have used "reserved" field in IVMD table to include "pci_seg
id" which was set to zero. It will take care of backward compatibility
(new kernel will work fine on older systems).
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Newer AMD systems can support multiple PCI segments, where each segment
contains one or more IOMMU instances. However, an IOMMU instance can only
support a single PCI segment.
Current code assumes that system contains only one pci segment (segment 0)
and creates global data structures such as device table, rlookup table,
etc.
Introducing per PCI segment data structure, which contains segment
specific data structures. This will eventually replace the global
data structures.
Also update `amd_iommu->pci_seg` variable to point to PCI segment
structure instead of PCI segment ID.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
struct iommu_dev_data contains member "pdev" to point to pci_dev. This is
valid for only PCI devices and for other devices this will be NULL. This
causes unnecessary "pdev != NULL" check at various places.
Replace "struct pci_dev" member with "struct device" and use to_pci_dev()
to get pci device reference as needed. Also adjust setup_aliases() and
clone_aliases() function.
No functional change intended.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
