Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Pull io_uring fix from Jens Axboe:
"Just a single fix for the commit that went into your tree yesterday,
which exposed an issue with not always clearing notifications. That
could cause them to be used more than once"
* tag 'io_uring-6.14-20250322' of git://git.kernel.dk/linux:
io_uring/net: fix sendzc double notif flush
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 5823 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Call Trace:
<TASK>
io_notif_flush io_uring/notif.h:40 [inline]
io_send_zc_cleanup+0x121/0x170 io_uring/net.c:1222
io_clean_op+0x58c/0x9a0 io_uring/io_uring.c:406
io_free_batch_list io_uring/io_uring.c:1429 [inline]
__io_submit_flush_completions+0xc16/0xd20 io_uring/io_uring.c:1470
io_submit_flush_completions io_uring/io_uring.h:159 [inline]
Before the blamed commit, sendzc relied on io_req_msg_cleanup() to clear
REQ_F_NEED_CLEANUP, so after the following snippet the request will
never hit the core io_uring cleanup path.
io_notif_flush();
io_req_msg_cleanup();
The easiest fix is to null the notification. io_send_zc_cleanup() can
still be called after, but it's tolerated.
Reported-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Tested-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Fixes: cc34d8330e ("io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1306007458b8891c88c4f20c966a17595f766b0.1742643795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull io_uring fix from Jens Axboe:
"Single fix heading to stable, fixing an issue with io_req_msg_cleanup()
sometimes too eagerly clearing cleanup flags"
* tag 'io_uring-6.14-20250321' of git://git.kernel.dk/linux:
io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally
By default, io_uring marks a waiting task as being in iowait, if it's
sleeping waiting on events and there are pending requests. This isn't
necessarily always useful, and may be confusing on non-storage setups
where iowait isn't expected. It can also cause extra power usage, by
preventing the CPU from entering lower sleep states.
This adds a new enter flag, IORING_ENTER_NO_IOWAIT. If set, then
io_uring will not account the sleeping task as being in iowait. If the
kernel supports this feature, then it will be marked by having the
IORING_FEAT_NO_IOWAIT feature flag set.
As the kernel currently does not support separating the iowait
accounting and CPU frequency boosting, the IORING_ENTER_NO_IOWAIT
controls both of these at the same time. In the future, if those do end
up being split, then it'd be possible to control them separately.
However, it seems more likely that the kernel will decouple iowait and
CPU frequency boosting anyway.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_msg_cleanup() relies on the fact that io_netmsg_recycle() will
always fully recycle, but that may not be the case if the msg cache
was already full. To ensure that normal cleanup always gets run,
let io_netmsg_recycle() deal with clearing the relevant cleanup flags,
as it knows exactly when that should be done.
Cc: stable@vger.kernel.org
Reported-by: David Wei <dw@davidwei.uk>
Fixes: 7519134178 ("io_uring/net: add iovec recycling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The original support for incrementally consumed buffers didn't allow it
to be used with bundles, with the assumption being that incremental
buffers are generally larger, and hence there's less of a nedd to
support it.
But that assumption may not be correct - it's perfectly viable to use
smaller buffers with incremental consumption, and there may be valid
reasons for an application or framework to do so.
As there's really no need to explicitly disable bundles with
incrementally consumed buffers, allow it. This actually makes the peek
side cheaper and simpler, with the completion side basically the same,
just needing to iterate for the consumed length.
Reported-by: Norman Maurer <norman_maurer@apple.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull io_uring fix from Jens Axboe:
"A single fix for a regression introduced in the 6.14 merge window,
causing stalls/hangs with IOPOLL reads or writes"
* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
io_uring/rw: ensure reissue path is correctly handled for IOPOLL
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IOPOLL path posts CQEs when the io_kiocb is marked as completed,
so it cannot rely on the usual retry that non-IOPOLL requests do for
read/write requests.
If -EAGAIN is received and the request should be retried, go through
the normal completion path and let the normal flush logic catch it and
reissue it, like what is done for !IOPOLL reads or writes.
Fixes: d803d12394 ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Reported-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/io-uring/2b43ccfa-644d-4a09-8f8f-39ad71810f41@oracle.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper function io_cache_free() that returns an allocation to a
io_alloc_cache, falling back on kfree() if the io_alloc_cache is full.
This is the inverse of io_cache_alloc(), which takes an allocation from
an io_alloc_cache and falls back on kmalloc() if the cache is empty.
Convert 4 callers to use the helper.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250304194814.2346705-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_rsrc_node's of type IORING_RSRC_FILE always have a file attached
immediately after they are allocated. IORING_RSRC_BUFFER nodes won't be
returned from io_sqe_buffer_register()/io_buffer_register_bvec() until
they have a io_mapped_ubuf attached.
So remove the checks for a NULL file/buffer in io_free_rsrc_node().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250228235916.670437-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_buffer_register() currently calls io_put_rsrc_node() if it fails
to fully set up the io_rsrc_node. io_put_rsrc_node() is more involved
than necessary, since we already know the reference count will reach 0
and no io_mapped_ubuf has been attached to the node yet.
So just call io_free_node() to release the node's memory. This also
avoids the need to temporarily set the node's buf pointer to NULL.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250228235916.670437-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull io_uring fix from Jens Axboe:
"Just a single fix headed for stable, ensuring that msg_control is
properly saved in compat mode as well"
* tag 'io_uring-6.14-20250228' of git://git.kernel.dk/linux:
io_uring/net: save msg_control for compat
Provide an interface for the kernel to leverage the existing
pre-registered buffers that io_uring provides. User space can reference
these later to achieve zero-copy IO.
User space must register an empty fixed buffer table with io_uring in
order for the kernel to make use of it.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-5-kbusch@meta.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A code rework resulted in an uninitialized return code when COMPAT
mode is disabled:
io_uring/net.c:722:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
722 | if (io_is_compat(req->ctx)) {
| ^~~~~~~~~~~~~~~~~~~~~~
io_uring/net.c:736:15: note: uninitialized use occurs here
736 | if (unlikely(ret))
| ^~~
Since io_is_compat() turns into a compile-time 'false', the #ifdef
here is completely unnecessary, and removing it avoids the warning.
Fixes: 51e158d405 ("io_uring/net: unify *mshot_prep calls with compat")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250227132018.1111094-1-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally, net/ would verify msghdr before importing iovec, for example
see copy_msghdr_from_user(), which further assumed by __copy_msghdr()
validating msg->msg_iovlen.
io_uring does it in reverse order, which is fine, but it'll be more
convenient for flip it so that the iovec business is done at the end and
eventually can be nicely pulled out of msghdr parsing section and
thought as a sepaarate step. That also makes structure accesses more
localised, which should be better for caches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cd35dc1b48d4e6e31f59ae7304c037fbe8a3fd3d.1740569495.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The user access section in io_msg_copy_hdr() is overextended by covering
selected buffers. It's hard to work with and prone to errors. Limit the
section to msghdr import only, selected buffers will do a separate
copy_from_user() call, and then move it into its own function. This
should be fine, selected buffer single shots are not important, for
multishots the overhead should be non-existent, and it's not that
expensive overall.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d3eb1f81c8cfbea9f1aa57dab90c472d2aa6e371.1740569495.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge mainline fixes into 6.15 branch, as upcoming patches depend on
fixes that went into the 6.14 mainline branch.
* io_uring-6.14:
io_uring/net: save msg_control for compat
io_uring/rw: clean up mshot forced sync mode
io_uring/rw: move ki_complete init into prep
io_uring/rw: don't directly use ki_complete
io_uring/rw: forbid multishot async reads
io_uring/rsrc: remove unused constants
io_uring: fix spelling error in uapi io_uring.h
io_uring: prevent opcode speculation
io-wq: backoff when retrying worker creation
Registered buffer are currently imported in two steps, first we lookup
a rsrc node and then use it to set up the iterator. The first part is
usually done at the prep stage, and import happens whenever it's needed.
As we want to defer binding to a node so that it works with linked
requests, combine both steps into a single helper.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250224213116.3509093-6-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
