Pull percpu updates from Dennis Zhou:
"A couple of updates to clean up the code with no change in behavior"
* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: Use struct_size() helper
percpu: fix typo in pcpu_setup_first_chunk() comment
percpu: Make pcpu_setup_first_chunk() void function
Pull asm-generic updates from Arnd Bergmann:
"Here are three small cleanup patches for the include/asm-generic
directory.
Christoph removes the __ioremap as part of a cleanup, Nico improves
the constant do_div() optimization, and Denis changes BUG_ON() to be
consistent with other implementations"
* tag 'asm-generic-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: add unlikely to default BUG_ON(x)
__div64_const32(): improve the generic C version
asm-generic: don't provide __ioremap
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
Ensure that we dequeue the request from the transport receive queue
while we're re-encoding to prevent issues like use-after-free when
we release the bvec.
Fixes: 7536908982 ("SUNRPC: Ensure the bvecs are reset when we re-encode...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull core irq updates from Thomas Gleixner:
"Updates from the irq departement:
- Update the interrupt spreading code so it handles numa node with
different CPU counts properly.
- A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
ranges.
- Conversion of all alloc_fwnode() users to use physical addresses
instead of virtual addresses so the virtual addresses are not
leaked. The physical address is sufficient to identify the
associated interrupt chip.
- Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.
- Enforce interrupt threading at compile time if RT is enabled.
- Small updates and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
irqdomain: Add the missing assignment of domain->fwnode for named fwnode
irqchip/mmp: Coexist with GIC root IRQ controller
irqchip/mmp: Mask off interrupts from other cores
irqchip/mmp: Add missing chained_irq_{enter,exit}()
irqchip/mmp: Do not use of_address_to_resource() to get mux regs
irqchip/meson-gpio: Add support for meson sm1 SoCs
dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
genirq/affinity: Remove const qualifier from node_to_cpumask argument
genirq/affinity: Spread vectors on node according to nr_cpu ratio
genirq/affinity: Improve __irq_build_affinity_masks()
irqchip: Remove dev_err() usage after platform_get_irq()
irqchip: Add include guard to irq-partition-percpu.h
irqchip/mmp: Do not call irq_set_default_host() on DT platforms
irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
irqchip/gic-v3: Add EPPI range support
...
Pull CPU hotplug updates from Thomas Gleixner:
"A small update for the SMP hotplug code code:
- Track "booted once" CPUs in a cpumask so the x86 APIC code has an
easy way to decide whether broadcast IPIs are safe to use or not.
- Implement a cpumask_or_equal() helper for the IPI broadcast
evaluation.
The above two changes have been also pulled into the x86/apic
branch for implementing the conditional IPI broadcast feature.
- Cache the number of online CPUs instead of reevaluating it over and
over. num_online_cpus() is an unreliable snapshot anyway except
when it is used outside a cpu hotplug locked region. The cached
access is not changing this, but it's definitely faster than
calculating the bitmap wheight especially in hot paths"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Cache number of online CPUs
cpumask: Implement cpumask_or_equal()
smp/hotplug: Track booted once CPUs in a cpumask
The new BCM2711 supports an additional clock for the emmc2 block.
So we need an additional compatible.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
* acpica:
ACPICA: Update version to 20190816.
ACPICA: Add "Windows 2019" string to _OSI support.
ACPICA: Differentiate Windows 8.1 from Windows 8.
ACPICA: Fully deploy ACPI_PRINTF_LIKE macro
ACPICA: iASL,acpi_dump: Improve y/n query
ACPICA: Fix issues with arg types within printf format strings
ACPICA: Macros: remove pointer math on a null pointer
ACPICA: Increase total number of possible Owner IDs
ACPICA: Debugger: remove redundant assignment on obj_desc
* pm-opp:
PM / OPP: Correct Documentation about library location
opp: of: Support multiple suspend OPPs defined in DT
dt-bindings: opp: Support multiple opp-suspend properties
opp: core: add regulators enable and disable
opp: Don't decrement uninitialized list_kref
* pm-qos:
PM: QoS: Get rid of unused flags
* acpi-pm:
ACPI: PM: Print debug messages on device power state changes
* pm-domains:
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
PM / Domains: Align in-parameter names for some genpd functions
* pm-tools:
pm-graph: make setVal unbuffered again for python2 and python3
cpupower: update German translation
tools/power/cpupower: fix 64bit detection when cross-compiling
cpupower: Add missing newline at end of file
pm-graph v5.5
* pm-cpufreq: (36 commits)
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
sched/cpufreq: Align trace event behavior of fast switching
ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier
video: pxafb: Remove cpufreq policy notifier
video: sa1100fb: Remove cpufreq policy notifier
arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY
cpufreq: powerpc_cbe: Switch to QoS requests for freq limits
cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits
cpufreq: Print driver name if cpufreq_suspend() fails
cpufreq: mediatek: Add support for mt8183
cpufreq: mediatek: change to regulator_get_optional
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
...
* pm-cpuidle:
cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
cpuidle-haltpoll: do not set an owner to allow modunload
cpuidle-haltpoll: return -ENODEV on modinit failure
cpuidle-haltpoll: set haltpoll as preferred governor
cpuidle: allow governor switch on cpuidle_register_driver()
powercap: idle_inject: Use higher resolution for idle injection
cpuidle: play_idle: Increase the resolution to usec
cpuidle-haltpoll: vcpu hotplug support
cpuidle: teo: Get rid of redundant check in teo_update()
cpuidle: teo: Allow tick to be stopped if PM QoS is used
cpuidle: menu: Allow tick to be stopped if PM QoS is used
cpuidle: header file stubs must be "static inline"
cpuidle-haltpoll: disable host side polling when kvm virtualized
cpuidle: add haltpoll governor
governors: unify last_state_idx
cpuidle: add poll_limit_ns to cpuidle_device structure
add cpuidle-haltpoll driver
* pm-s2idle-rework: (21 commits)
ACPI: PM: s2idle: Always set up EC GPE for system wakeup
ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily
PM: suspend: Fix platform_suspend_prepare_noirq()
intel-hid: Disable button array during suspend-to-idle
intel-hid: intel-vbtn: Avoid leaking wakeup_mode set
ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices
ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message
ACPI: EC: PM: Consolidate some code depending on PM_SLEEP
ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events()
ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend
ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter
ACPI: PM: s2idle: Rearrange lps0_device_attach()
ACPI: PM: Set up EC GPE for system wakeup from drivers that need it
PM: sleep: Drop dpm_noirq_begin() and dpm_noirq_end()
PM: sleep: Integrate suspend-to-idle with generig suspend flow
PM: sleep: Simplify suspend-to-idle control flow
ACPI: PM: Set s2idle_wakeup earlier and clear it later
PM: sleep: Fix possible overflow in pm_system_cancel_wakeup()
ACPI: EC: Return bool from acpi_ec_dispatch_gpe()
ACPICA: Return u32 from acpi_dispatch_gpe()
...
GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.
In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.
Fixes: 623a6143a8 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add documentation for the mt8183 gce.
Add gce header file defined the gce hardware event,
subsys number and constant for mt8183.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Pull x86 platform-drivers updates from Andy Shevchenko:
- ASUS WMI driver got a couple of updates, i.e. support of FAN is fixed
for recent products and the charge threshold support has been added
- Two uknown key events for Dell laptops are being ignored now to avoid
spamming users with harmless messages
- HP ZBook 17 G5 and ASUS Zenbook UX430UNR got accelerometer support.
- Intel CherryTrail platforms had a regression with wake up. Now it's
fixed
- Intel PMC driver got fixed in order to work nicely in Xen
environment
- Intel Speed Select driver provides bucket vs core count relationship.
Besides that the tools has been updated for better output
- The PrivacyGuard is enabled on Lenovo ThinkPad laptops
- Three tablets - Trekstor Primebook C11B 2-in-1, Irbis TW90 and Chuwi
Surbook Mini - got touchscreen support
* tag 'platform-drivers-x86-v5.4-1' of git://git.infradead.org/linux-platform-drivers-x86: (53 commits)
MAINTAINERS: Switch PDx86 subsystem status to Odd Fixes
platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API
platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOC
platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLD
tools/power/x86/intel-speed-select: Display core count for bucket
platform/x86: ISST: Allow additional TRL MSRs
tools/power/x86/intel-speed-select: Fix memory leak
tools/power/x86/intel-speed-select: Output success/failed for command output
tools/power/x86/intel-speed-select: Output human readable CPU list
tools/power/x86/intel-speed-select: Change turbo ratio output to maximum turbo frequency
tools/power/x86/intel-speed-select: Switch output to MHz
tools/power/x86/intel-speed-select: Simplify output for turbo-freq and base-freq
tools/power/x86/intel-speed-select: Fix cpu-count output
tools/power/x86/intel-speed-select: Fix help option typo
tools/power/x86/intel-speed-select: Fix package typo
tools/power/x86/intel-speed-select: Fix a read overflow in isst_set_tdp_level_msr()
platform/x86: intel_int0002_vgpio: Use device_init_wakeup
platform/x86: intel_int0002_vgpio: Fix wakeups not working on Cherry Trail
platform/x86: compal-laptop: Initialize "value" in ec_read_u8()
platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11B 2-in-1
...
Pull x86 cpu-feature updates from Ingo Molnar:
- Rework the Intel model names symbols/macros, which were decades of
ad-hoc extensions and added random noise. It's now a coherent, easy
to follow nomenclature.
- Add new Intel CPU model IDs:
- "Tiger Lake" desktop and mobile models
- "Elkhart Lake" model ID
- and the "Lightning Mountain" variant of Airmont, plus support code
- Add the new AVX512_VP2INTERSECT instruction to cpufeatures
- Remove Intel MPX user-visible APIs and the self-tests, because the
toolchain (gcc) is not supporting it going forward. This is the
first, lowest-risk phase of MPX removal.
- Remove X86_FEATURE_MFENCE_RDTSC
- Various smaller cleanups and fixes
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Update init data for new Airmont CPU model
x86/cpu: Add new Airmont variant to Intel family
x86/cpu: Add Elkhart Lake to Intel family
x86/cpu: Add Tiger Lake to Intel family
x86: Correct misc typos
x86/intel: Add common OPTDIFFs
x86/intel: Aggregate microserver naming
x86/intel: Aggregate big core graphics naming
x86/intel: Aggregate big core mobile naming
x86/intel: Aggregate big core client naming
x86/cpufeature: Explain the macro duplication
x86/ftrace: Remove mcount() declaration
x86/PCI: Remove superfluous returns from void functions
x86/msr-index: Move AMD MSRs where they belong
x86/cpu: Use constant definitions for CPU models
lib: Remove redundant ftrace flag removal
x86/crash: Remove unnecessary comparison
x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE()
x86: Remove X86_FEATURE_MFENCE_RDTSC
x86/mpx: Remove MPX APIs
...
Pull scheduler updates from Ingo Molnar:
- MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.
As perf and the scheduler is getting bigger and more complex,
document the status quo of current responsibilities and interests,
and spread the review pain^H^H^H^H fun via an increase in the Cc:
linecount generated by scripts/get_maintainer.pl. :-)
- Add another series of patches that brings the -rt (PREEMPT_RT) tree
closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
into a new CONFIG_PREEMPTION category that will allow the eventual
introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
to go though.
- Extend the CPU cgroup controller with uclamp.min and uclamp.max to
allow the finer shaping of CPU bandwidth usage.
- Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).
- Improve the behavior of high CPU count, high thread count
applications running under cpu.cfs_quota_us constraints.
- Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.
- Improve CPU isolation housekeeping CPU allocation NUMA locality.
- Fix deadline scheduler bandwidth calculations and logic when cpusets
rebuilds the topology, or when it gets deadline-throttled while it's
being offlined.
- Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
setscheduler() system calls without creating global serialization.
Add new synchronization between cpuset topology-changing events and
the deadline acceptance tests in setscheduler(), which were broken
before.
- Rework the active_mm state machine to be less confusing and more
optimal.
- Rework (simplify) the pick_next_task() slowpath.
- Improve load-balancing on AMD EPYC systems.
- ... and misc cleanups, smaller fixes and improvements - please see
the Git log for more details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
sched/psi: Correct overly pessimistic size calculation
sched/fair: Speed-up energy-aware wake-ups
sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
sched/uclamp: Update CPU's refcount on TG's clamp changes
sched/uclamp: Use TG's clamps to restrict TASK's clamps
sched/uclamp: Propagate system defaults to the root group
sched/uclamp: Propagate parent clamps
sched/uclamp: Extend CPU's cgroup controller
sched/topology: Improve load balancing on AMD EPYC systems
arch, ia64: Make NUMA select SMP
sched, perf: MAINTAINERS update, add submaintainers and reviewers
sched/fair: Use rq_lock/unlock in online_fair_sched_group
cpufreq: schedutil: fix equation in comment
sched: Rework pick_next_task() slow-path
sched: Allow put_prev_task() to drop rq->lock
sched/fair: Expose newidle_balance()
sched: Add task_struct pointer to sched_class::set_curr_task
sched: Rework CPU hotplug task selection
sched/{rt,deadline}: Fix set_next_task vs pick_next_task
sched: Fix kerneldoc comment for ia64_set_curr_task
...
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Improved kbprobes robustness
- Intel PEBS support for PT hardware tracing
- Other Intel PT improvements: high order pages memory footprint
reduction and various related cleanups
- Misc cleanups
The perf tooling side has been very busy in this cycle, with over 300
commits. This is an incomplete high-level summary of the many
improvements done by over 30 developers:
- Lots of updates to the following tools:
'perf c2c'
'perf config'
'perf record'
'perf report'
'perf script'
'perf test'
'perf top'
'perf trace'
- Updates to libperf and libtraceevent, and a consolidation of the
proliferation of x86 instruction decoder libraries.
- Vendor event updates for Intel and PowerPC CPUs,
- Updates to hardware tracing tooling for ARM and Intel CPUs,
- ... and lots of other changes and cleanups - see the shortlog and
Git log for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (322 commits)
kprobes: Prohibit probing on BUG() and WARN() address
perf/x86: Make more stuff static
x86, perf: Fix the dependency of the x86 insn decoder selftest
objtool: Ignore intentional differences for the x86 insn decoder
objtool: Update sync-check.sh from perf's check-headers.sh
perf build: Ignore intentional differences for the x86 insn decoder
perf intel-pt: Use shared x86 insn decoder
perf intel-pt: Remove inat.c from build dependency list
perf: Update .gitignore file
objtool: Move x86 insn decoder to a common location
perf metricgroup: Support multiple events for metricgroup
perf metricgroup: Scale the metric result
perf pmu: Change convert_scale from static to global
perf symbols: Move mem_info and branch_info out of symbol.h
perf auxtrace: Uninline functions that touch perf_session
perf tools: Remove needless evlist.h include directives
perf tools: Remove needless evlist.h include directives
perf tools: Remove needless thread_map.h include directives
perf tools: Remove needless thread.h include directives
perf tools: Remove needless map.h include directives
...
Pull locking updates from Ingo Molnar:
- improve rwsem scalability
- add uninitialized rwsem debugging check
- reduce lockdep's stacktrace memory usage and add diagnostics
- misc cleanups, code consolidation and constification
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mutex: Fix up mutex_waiter usage
locking/mutex: Use mutex flags macro instead of hard code
locking/mutex: Make __mutex_owner static to mutex.c
locking/qspinlock,x86: Clarify virt_spin_lock_key
locking/rwsem: Check for operations on an uninitialized rwsem
locking/rwsem: Make handoff writer optimistically spin on owner
locking/lockdep: Report more stack trace statistics
locking/lockdep: Reduce space occupied by stack traces
stacktrace: Constify 'entries' arguments
locking/lockdep: Make it clear that what lock_class::key points at is not modified
Pull EFI updates from Ingo Molnar:
- refactor the EFI config table handling across architectures
- add support for the Dell EMC OEM config table
- include AER diagnostic output to CPER handling of fatal PCIe errors
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: cper: print AER info of PCIe fatal error
efi: Export Runtime Configuration Interface table to sysfs
efi: ia64: move SAL systab handling out of generic EFI code
efi/x86: move UV_SYSTAB handling into arch/x86
efi: x86: move efi_is_table_address() into arch/x86
Pull RCU updates from Ingo Molnar:
"This cycle's RCU changes were:
- A few more RCU flavor consolidation cleanups.
- Updates to RCU's list-traversal macros improving lockdep usability.
- Forward-progress improvements for no-CBs CPUs: Avoid ignoring
incoming callbacks during grace-period waits.
- Forward-progress improvements for no-CBs CPUs: Use ->cblist
structure to take advantage of others' grace periods.
- Also added a small commit that avoids needlessly inflicting
scheduler-clock ticks on callback-offloaded CPUs.
- Forward-progress improvements for no-CBs CPUs: Reduce contention on
->nocb_lock guarding ->cblist.
- Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
list to further reduce contention on ->nocb_lock guarding ->cblist.
- Miscellaneous fixes.
- Torture-test updates.
- minor LKMM updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
MAINTAINERS: Update from paulmck@linux.ibm.com to paulmck@kernel.org
rcu: Don't include <linux/ktime.h> in rcutiny.h
rcu: Allow rcu_do_batch() to dynamically adjust batch sizes
rcu/nocb: Don't wake no-CBs GP kthread if timer posted under overload
rcu/nocb: Reduce __call_rcu_nocb_wake() leaf rcu_node ->lock contention
rcu/nocb: Reduce nocb_cb_wait() leaf rcu_node ->lock contention
rcu/nocb: Advance CBs after merge in rcutree_migrate_callbacks()
rcu/nocb: Avoid synchronous wakeup in __call_rcu_nocb_wake()
rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed
rcu/nocb: EXP Check use and usefulness of ->nocb_lock_contended
rcu/nocb: Add bypass callback queueing
rcu/nocb: Atomic ->len field in rcu_segcblist structure
rcu/nocb: Unconditionally advance and wake for excessive CBs
rcu/nocb: Reduce ->nocb_lock contention with separate ->nocb_gp_lock
rcu/nocb: Reduce contention at no-CBs invocation-done time
rcu/nocb: Reduce contention at no-CBs registry-time CB advancement
rcu/nocb: Round down for number of no-CBs grace-period kthreads
rcu/nocb: Avoid ->nocb_lock capture by corresponding CPU
rcu/nocb: Avoid needless wakeups of no-CBs grace-period kthread
rcu/nocb: Make __call_rcu_nocb_wake() safe for many callbacks
...
Pull ARM DT updates from Arnd Bergmann:
"This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit
respectively. There are lots of cleanups and additional hardware
support for platforms we already support based on SoCs from Renesas,
ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
- The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
platform, usually paired with an external 5G modem. So far we only
support the Qualcomm SM8150 MTP reference platform, but no actual
products.
- For the slightly older Qualcomm platforms, support for several
interesting products is getting added: Three laptops based on
Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
and several phones based on the older Snapdragon 410/MSM8916
(Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
aka Wileyfox Swift).
- Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
- Allwinner V3 is a repackaged version of the existing low-end V3s
chip, and is used in the tiny Lichee Pi Zero plus, also added here.
There is also a new TV set-top box based on Allwinner H6, the Tanix
TX6, and the eMMC variant of the Olimex A64-Olinuxino development
board.
- NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
family, similar to the i.MX8M Mini. As usual, there is a large
number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
SolidRun Hummingboard Pulse baseboard and System-on-Module,
Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
- In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
- Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
their set-top-box line and smart speaker with newer CPU and GPU
cores compared to their predecessors. Both are now also supported
by the Khadas VIM3 development board series, and the dts files for
that get reorganized a bit to better deal with all variants.
Another board based on SM1 that gets added is the SEI Robotics
SEI610.
- There are a handful of new x86 and Power9 server boards using
Aspeed BMC chips that are gaining support for running Linux on the
BMC through the OpenBMC project: Facebook
Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
these are still new machines using SoCs based on the ARM9 and ARM11
CPU cores, as support for the new Cortex-A7 based AST2600 is still
ramping up.
- There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
low-end RK3229 chip, while the two AOpen products Chromebox Mini
(Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
commercial settings(digital signage, PoS, ...).
- One more single-board computer based on the popular 64-bit RK3399
is added: the Leez RK3399 P710"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
arm64: dts: qcom: Add Lenovo Yoga C630
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
ARM; dts: aspeed: mihawk: File should not be executable
ARM: dts: aspeed: swift: Change power supplies to version 2
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed-g4: Add all flash chips
ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
ARM: dts: exynos: Remove not accurate secondary ADC compatible
arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
arm64: dts: meson-sm1-sei610: add stdout-path property back
arm64: dts: meson-sm1-sei610: enable DVFS
arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
arm64: dts: meson: g12a: add reset to tdm formatters
...
Pull ARM SoC driver updates from Arnd Bergmann:
"This contains driver changes that are tightly connected to SoC
specific code. Aside from smaller cleanups and bug fixes, here is a
list of the notable changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver for its
on-board pluggable extension bus. The same platform also gains a
firmware driver.
- The Samsung Exynos family gains a new Chipid driver exporting using
the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon chips.
- A firmware driver for the NXP i.MX DSP IPC protocol using shared
memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for the S905X3 and A311D
chips
- A rework of the TI Davinci framebuffer driver to allow important
cleanups in the platform code
- A couple of device drivers for removed ARM SoC platforms are
removed. Most of the removals were picked up by other maintainers,
this contains whatever was left"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
bus: uniphier-system-bus: use devm_platform_ioremap_resource()
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
bus: imx-weim: remove incorrect __init annotations
fbdev: remove w90x900/nuc900 platform drivers
spi: remove w90x900 driver
net: remove w90p910-ether driver
net: remove ks8695 driver
firmware: turris-mox-rwtm: Add sysfs documentation
firmware: Add Turris Mox rWTM firmware driver
dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
bus: moxtet: fix unsigned comparison to less than zero
bus: moxtet: remove set but not used variable 'dummy'
ARM: scoop: Use the right include
dt-bindings: power: add Amlogic Everything-Else power domains bindings
soc: amlogic: Add support for Everything-Else power domains controller
fbdev: da8xx: use resource management for dma
fbdev: da8xx-fb: drop a redundant if
fbdev: da8xx-fb: use devm_platform_ioremap_resource()
...
Pull ARM SoC platform updates from Arnd Bergmann:
"The main change this time around is a cleanup of some of the oldest
platforms based on the XScale and ARM9 CPU cores, which are between 10
and 20 years old.
The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
IOP33x/IOP13xx platforms are removed after we determined that nobody
is using them any more.
The TI Davinci and NXP LPC32xx platforms on the other hand are still
in active use and are converted to the ARCH_MULTIPLATFORM build,
meaning that we can compile a kernel that works on these along with
most other ARMv5 platforms. Changes toward that goal are also merged
for IOP32x, but additional work is needed to complete this. Patches
for the remaining ARMv5 platforms have started but need more work and
some testing.
Support for the new ASpeed AST2600 gets added, this is based on the
Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
ARMv6 chips in the same family.
Other changes include a cleanup of the ST-Ericsson ux500 platform and
the move of the TI Davinci platform to a new clocksource driver"
[ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being
buildable on other platforms through COMPILE_TEST, but that causes new
warnings that I most definitely do not want to see during the merge
window as that could hide other issues.
So the COMPILE_TEST option got disabled for them again - Linus ]
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build
ARM: davinci: support multiplatform build for ARM v5
arm64: exynos: Enable exynos-chipid driver
ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
ARM: davinci: dm646x: Fix a typo in the comment
ARM: davinci: dm646x: switch to using the clocksource driver
ARM: davinci: dm644x: switch to using the clocksource driver
ARM: aspeed: Enable SMP boot
ARM: aspeed: Add ASPEED AST2600 architecture
ARM: aspeed: Select timer in each SoC
dt-bindings: arm: cpus: Add ASPEED SMP
ARM: imx: stop adjusting ar8031 phy tx delay
mailmap: map old company name to new one @microchip.com
MAINTAINERS: at91: remove the TC entry
MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry
ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
ARM: debug-ll: Add support for r7s9210
...
Pull parisc updates from Helge Deller:
- Make the powerpc implementation to read elf files available as a
public kexec interface so it can be re-used on other architectures
(Sven)
- Implement kexec on parisc (Sven)
- Add kprobes on ftrace on parisc (Sven)
- Fix kernel crash with HSC-PCI cards based on card-mode Dino
- Add assembly implementations for memset, strlen, strcpy, strncpy and
strcat
- Some cleanups, documentation updates, warning fixes, ...
* 'parisc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (25 commits)
parisc: Have git ignore generated real2.S and firmware.c
parisc: Disable HP HSC-PCI Cards to prevent kernel crash
parisc: add support for kexec_file_load() syscall
parisc: wire up kexec_file_load syscall
parisc: add kexec syscall support
parisc: add __pdc_cpu_rendezvous()
kprobes/parisc: remove arch_kprobe_on_func_entry()
kexec_elf: support 32 bit ELF files
kexec_elf: remove unused variable in kexec_elf_load()
kexec_elf: remove Elf_Rel macro
kexec_elf: remove PURGATORY_STACK_SIZE
kexec_elf: remove parsing of section headers
kexec_elf: change order of elf_*_to_cpu() functions
kexec: add KEXEC_ELF
parisc: Save some bytes in dino driver
parisc: Drop comments which are already in pci.h
parisc: Convert eisa_enumerator to use pr_cont()
parisc: Avoid warning when loading hppb driver
parisc: speed up flush_tlb_all_local with qemu
parisc: Add ALTERNATIVE_CODE() and ALT_COND_RUN_ON_QEMU
...
Pull ia64 updates from Tony Luck:
"The big change here is removal of support for SGI Altix"
* tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits)
genirq: remove the is_affinity_mask_valid hook
ia64: remove CONFIG_SWIOTLB ifdefs
ia64: remove support for machvecs
ia64: move the screen_info setup to common code
ia64: move the ROOT_DEV setup to common code
ia64: rework iommu probing
ia64: remove the unused sn_coherency_id symbol
ia64: remove the SGI UV simulator support
ia64: remove the zx1 swiotlb machvec
ia64: remove CONFIG_ACPI ifdefs
ia64: remove CONFIG_PCI ifdefs
ia64: remove the hpsim platform
ia64: remove now unused machvec indirections
ia64: remove support for the SGI SN2 platform
drivers: remove the SGI SN2 IOC4 base support
drivers: remove the SGI SN2 IOC3 base support
qla2xxx: remove SGI SN2 support
qla1280: remove SGI SN2 support
misc/sgi-xp: remove SGI SN2 support
char/mspec: remove SGI SN2 support
...
Pull arm64 updates from Will Deacon:
"Although there isn't tonnes of code in terms of line count, there are
a fair few headline features which I've noted both in the tag and also
in the merge commits when I pulled everything together.
The part I'm most pleased with is that we had 35 contributors this
time around, which feels like a big jump from the usual small group of
core arm64 arch developers. Hopefully they all enjoyed it so much that
they'll continue to contribute, but we'll see.
It's probably worth highlighting that we've pulled in a branch from
the risc-v folks which moves our CPU topology code out to where it can
be shared with others.
Summary:
- 52-bit virtual addressing in the kernel
- New ABI to allow tagged user pointers to be dereferenced by
syscalls
- Early RNG seeding by the bootloader
- Improve robustness of SMP boot
- Fix TLB invalidation in light of recent architectural
clarifications
- Support for i.MX8 DDR PMU
- Remove direct LSE instruction patching in favour of static keys
- Function error injection using kprobes
- Support for the PPTT "thread" flag introduced by ACPI 6.3
- Move PSCI idle code into proper cpuidle driver
- Relaxation of implicit I/O memory barriers
- Build with RELR relocations when toolchain supports them
- Numerous cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits)
arm64: remove __iounmap
arm64: atomics: Use K constraint when toolchain appears to support it
arm64: atomics: Undefine internal macros after use
arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
arm64: asm: Kill 'asm/atomic_arch.h'
arm64: lse: Remove unused 'alt_lse' assembly macro
arm64: atomics: Remove atomic_ll_sc compilation unit
arm64: avoid using hard-coded registers for LSE atomics
arm64: atomics: avoid out-of-line ll/sc atomics
arm64: Use correct ll/sc atomic constraints
jump_label: Don't warn on __exit jump entries
docs/perf: Add documentation for the i.MX8 DDR PMU
perf/imx_ddr: Add support for AXI ID filtering
arm64: kpti: ensure patched kernel text is fetched from PoU
arm64: fix fixmap copy for 16K pages and 48-bit VA
perf/smmuv3: Validate groups for global filtering
perf/smmuv3: Validate group size
arm64: Relax Documentation/arm64/tagged-pointers.rst
arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
arm64: mm: Ignore spurious translation faults taken from the kernel
...
Pull iommu updates from Joerg Roedel:
- batched unmap support for the IOMMU-API
- support for unlocked command queueing in the ARM-SMMU driver
- rework the ATS support in the ARM-SMMU driver
- more refactoring in the ARM-SMMU driver to support hardware
implemention specific quirks and errata
- bounce buffering DMA-API implementatation in the Intel VT-d driver
for untrusted devices (like Thunderbolt devices)
- fixes for runtime PM support in the OMAP iommu driver
- MT8183 IOMMU support in the Mediatek IOMMU driver
- rework of the way the IOMMU core sets the default domain type for
groups. Changing the default domain type on x86 does not require two
kernel parameters anymore.
- more smaller fixes and cleanups
* tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (113 commits)
iommu/vt-d: Declare Broadwell igfx dmar support snafu
iommu/vt-d: Add Scalable Mode fault information
iommu/vt-d: Use bounce buffer for untrusted devices
iommu/vt-d: Add trace events for device dma map/unmap
iommu/vt-d: Don't switch off swiotlb if bounce page is used
iommu/vt-d: Check whether device requires bounce buffer
swiotlb: Split size parameter to map/unmap APIs
iommu/omap: Mark pm functions __maybe_unused
iommu/ipmmu-vmsa: Disable cache snoop transactions on R-Car Gen3
iommu/ipmmu-vmsa: Move IMTTBCR_SL0_TWOBIT_* to restore sort order
iommu: Don't use sme_active() in generic code
iommu/arm-smmu-v3: Fix build error without CONFIG_PCI_ATS
iommu/qcom: Use struct_size() helper
iommu: Remove wrong default domain comments
iommu/dma: Fix for dereferencing before null checking
iommu/mediatek: Clean up struct mtk_smi_iommu
memory: mtk-smi: Get rid of need_larbid
iommu/mediatek: Fix VLD_PA_RNG register backup when suspend
memory: mtk-smi: Add bus_sel for mt8183
memory: mtk-smi: Invoke pm runtime_callback to enable clocks
...
Pull GPIO updates from Linus Walleij:
"This is the bulk of changes in the GPIO subsystem for the v5.4 kernel
cycle.
Core changes:
- Support hierarchical GPIO irqchips.
We now have three consumers that can use this: Intel IXP4xx,
ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem).
The support code has been long in the making and hashed out so it
should be easily adaptable for all hierarchical irqchip parents.
The code only gets compiled in if hierarchical irqchip is used at
the topmost irq controller at least, as the hierarchical irqchip
requires strict hierarchy all the way up in the system.
- Determine the need for a "valid_mask" for GPIO lines on the
gpio_chip and conversely for the "valid_mask" for the GPIO
interrupt chip interrupt lines by looking for a .init_valid_mask()
callback in the main chip or GPIO interrupt chip respectively.
Allocate it with bitmap_alloc().
- Isolate the device tree/open firmware GPIO description code out in
its own file properly.
- Isolate the ACPI GPIO description code out in its own file
properly.
- Drop a whole lot of #ifdef:s in the main includes: it does not hurt
to keep the include items around, and we get quicker and clearer
compile failures if the appropriate kernel symbols are not selected
for drivers.
New/deleted drivers:
- New driver for Aspeed SGPIO.
- The KS8695 driver is deleted as the platform gets deleted from
arch/arm in this kernel cycle.
- The Cirrus Logic Madera driver now supports CS47L92 and CS47L15.
- The Freescale MPC8xxx now supports LS1028A and LS1088A.
Driver improvements:
- We pass the GPIO irqchip intialization by directly filling in the
struct instead of using set-up functions (the new way) for Intel
MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86,
MT7621, Zynq and EP93xx.
Out-of-band changes:
- Fix a GPIO header inclusion in Unicore - no response from
maintainer.
- Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree
last cycle so let's mop up the shards"
* tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits)
gpiolib: of: add a fallback for wlf,reset GPIO name
gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq()
gpio: remove explicit comparison with 0
gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code
gpio: devres: Switch to EXPORT_SYMBOL_GPL()
gpio: of: Switch to EXPORT_SYMBOL_GPL()
gpio: of: Make of_gpio_simple_xlate() private
gpio: of: Make of_get_named_gpiod_flags() private
gpio: aspeed: Add in ast2600 details to Aspeed driver
gpio: aspeed: Use ngpio property from device tree if available
gpio: aspeed: Setup irqchip dynamically
gpio/aspeed: Fix incorrect number of banks
gpio: aspeed: Update documentation with ast2600 controllers
gpio: Initialize the irqchip valid_mask with a callback
gpiolib: acpi: make acpi_can_fallback_to_crs() static
gpio: Fix further merge errors
gpio: Fix up merge collision in include file
gpio: of: Normalize return code variable name
gpio: gpiolib: Normalize return code variable name
gpio: ep93xx: Pass irqchip when adding gpiochip
...
Pull i3c updates from Boris Brezillon:
"Core changes:
- Export i3c_device_match_id() so driver can get per-device data
- Add addr and lvr fields to i2c_dev_desc so we can attach I2C
devices that are not described in the DT
- Add a missing of_node_put()
- Fix a memory leak
- Use dev_to_i3cmaster() instead of open-coding it
Driver changes:
- Use for_each_set_bit() in the Cadence driver"
* tag 'i3c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Use dev_to_i3cmaster()
i3c: master: fix a memory leak bug
i3c: add addr and lvr to i2c_dev_desc structure
i3c: master: cdns: Use for_each_set_bit()
i3c: master: Add of_node_put() before return
i3c: move i3c_device_match_id to device.c and export it
Pull regulator updates from Mark Brown:
"A small update for the regualtor API for this cycle, some small fixes
and a bunch of new devices but none of them very big.
The most stand out thing is the regulator-fixed-clock driver which is
for regulators where the enable control is done by using a clock
instead of a GPIO or register write, a novel hardware design that had
not previously come up.
Summary:
- Added a keyword pattern for regulator_get_optional() since usage of
that API generally needs extra review.
- Operating mode and suspend state support for act8865.
- New device support for Active Semiconductor ACT8600 chargers,
Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
Synoptics SY20276, SY20278 and SY8824E"
* tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
regulator: core: Fix error return for /sys access
regulator: da9211: fix obtaining "enable" GPIO
regulator: max77686: fix obtaining "maxim,ena" GPIO
regulator: uniphier: Add Pro5 USB3 VBUS support
dt-bindings: regulator: add regulator-fixed-clock binding
regulator: fixed: add possibility to enable by clock
regulator: s2mps11: Consistently use local variable
regulator: lp87565: Simplify lp87565_buck_set_ramp_delay
regulator: slg51000: use devm_gpiod_get_optional() in probe
regulator: lp8788-ldo: make array en_mask static const, makes object smaller
regulator: tps65132: Stop parsing DT when gpio is not found
regulator: Defer init completion for a while after late_initcall
regulator: add missing 'static inline' to a helper's stub
regulator: provide regulator_bulk_set_supply_names()
MAINTAINERS: Add keyword pattern on regulator_get_optional()
regulator: sy8824x: add prefixes to BUCK_EN and MODE macros
regulator: sy8824x: use c++style for the comment block near SPDX
regulator: mt6358: Add BROKEN dependency while waiting for MFD to merge
regulator: mt6358: Add support for MT6358 regulator
regulator: Add document for MT6358 regulator
...
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Inspur Power System power supply driver
- Synaptics AS370 PVT sensor driver
Chip support:
- support SHTC3 in shtc1 driver
- support NCT6116 in nct6775 driver
- support AMD family 17h, model 70h CPUs in k10temp driver
- support PCT2075 in lm75 driver
Removed drivers:
- ads1015 driver (now supported in iio)
Other changes:
- Convert drivers to use devm_i2c_new_dummy_device
- Substantial structural improvements in lm75 driver adding support
for writing sample interval for supported chips
- Add support for PSU version 2 to ibm-cffps driver
- Add support for power attribute to iio_hwmon bridge
- Add support for additional fan, voltage and temperature attributes
to nct7904 driver
- Convert adt7475 driver to use hwmon_device_register_with_groups()
- Convert k8temp driver to use hwmon_device_register_with_info()
- Various other improvements and minor fixes"
* tag 'hwmon-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
hwmon: submitting-patches: Add note on comment style
hwmon: submitting-patches: Point to with_info API
hwmon: (nct7904) Fix incorrect SMI status register setting of LTD temperature and fan.
hwmon: (shtc1) add support for the SHTC3 sensor
hwmon: (shtc1) fix shtc1 and shtw1 id mask
hwmon: (lm75) Aproximate sample times to data-sheet values
hwmon: (w83793d) convert to use devm_i2c_new_dummy_device
hwmon: (w83792d) convert to use devm_i2c_new_dummy_device
hwmon: (w83791d) convert to use devm_i2c_new_dummy_device
hwmon: (as370-hwmon) fix devm_platform_ioremap_resource.cocci warnings
hwmon: (lm75) Add support for writing sampling period on PCT2075
hwmon: (lm75) Add support for writing conversion time for TMP112
hwmon: (lm75) Move updating the sample interval to its own function
hwmon: (lm75) Support configuring the sample time for various chips
hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD.
hwmon: (as370-hwmon) Add DT bindings for Synaptics AS370 PVT
hwmon: Add Synaptics AS370 PVT sensor driver
pmbus: (ibm-cffps) Add support for version 2 of the PSU
dt-bindings: hwmon: Document ibm,cffps2 compatible string
hwmon: (iio_hwmon) Enable power exporting from IIO
...
Pull EDAC updates from Borislav Petkov:
"The new thing this time around is that we have three maintainers now
and a new, old repo. New because it is new for the EDAC tree which is
hosted there from now on and old because it is Tony's and mine's old
RAS repo which we still use occasionally when the stuff isn't in tip.
Summary:
- EDAC tree has three maintainers and one new designated reviewer
now, so that the work can scale better.
- New driver for Mellanox' BlueField SoC DDR controller (Shravan
Kumar Ramani)
- AMD Rome support in amd64_edac (Yazen Ghannam and Isaac Vaughn)
- Misc fixes, cleanups and code improvements"
* tag 'edac_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Add PCI device IDs for family 17h, model 70h
MAINTAINERS: Add Robert as a EDAC reviewer
EDAC/mc_sysfs: Make debug messages consistent
EDAC/mc_sysfs: Remove pointless gotos
EDAC: Prefer 'unsigned int' to bare use of 'unsigned'
EDAC/amd64: Support asymmetric dual-rank DIMMs
EDAC/amd64: Cache secondary Chip Select registers
EDAC/amd64: Decode syndrome before translating address
EDAC/amd64: Find Chip Select memory size using Address Mask
EDAC/amd64: Initialize DIMM info for systems with more than two channels
EDAC/amd64: Recognize DRAM device type ECC capability
EDAC/amd64: Support more than two controllers for chip selects handling
EDAC/mc: Cleanup _edac_mc_free() code
EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()
EDAC, mellanox: Add ECC support for BlueField DDR4
EDAC/altera: Use the proper type for the IRQ status bits
EDAC/mc: Fix grain_bits calculation
edac: altera: Move Stratix10 SDRAM ECC to peripheral
MAINTAINERS: update EDAC entry to reflect current tree and maintainers
The `phy_tunable_id` has been named `ETHTOOL_PHY_EDPD` since it looks like
this feature is common across other PHYs (like EEE), and defining
`ETHTOOL_PHY_ENERGY_DETECT_POWER_DOWN` seems too long.
The way EDPD works, is that the RX block is put to a lower power mode,
except for link-pulse detection circuits. The TX block is also put to low
power mode, but the PHY wakes-up periodically to send link pulses, to avoid
lock-ups in case the other side is also in EDPD mode.
Currently, there are 2 PHY drivers that look like they could use this new
PHY tunable feature: the `adin` && `micrel` PHYs.
The ADIN's datasheet mentions that TX pulses are at intervals of 1 second
default each, and they can be disabled. For the Micrel KSZ9031 PHY, the
datasheet does not mention whether they can be disabled, but mentions that
they can modified.
The way this change is structured, is similar to the PHY tunable downshift
control:
* a `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` value is exposed to cover a default
TX interval; some PHYs could specify a certain value that makes sense
* `ETHTOOL_PHY_EDPD_NO_TX` would disable TX when EDPD is enabled
* `ETHTOOL_PHY_EDPD_DISABLE` will disable EDPD
As noted by the `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` the interval unit is 1
millisecond, which should cover a reasonable range of intervals:
- from 1 millisecond, which does not sound like much of a power-saver
- to ~65 seconds which is quite a lot to wait for a link to come up when
plugging a cable
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA currently handles shared block filters (for the classifier-action
qdisc) in the core due to what I believe are simply pragmatic reasons -
hiding the complexity from drivers and offerring a simple API for port
mirroring.
Extend the dsa_slave_setup_tc function by passing all other qdisc
offloads to the driver layer, where the driver may choose what it
implements and how. DSA is simply a pass-through in this case.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows taprio to offload the schedule enforcement to capable
network cards, resulting in more precise windows and less CPU usage.
The gate mask acts on traffic classes (groups of queues of same
priority), as specified in IEEE 802.1Q-2018, and following the existing
taprio and mqprio semantics.
It is up to the driver to perform conversion between tc and individual
netdev queues if for some reason it needs to make that distinction.
Full offload is requested from the network interface by specifying
"flags 2" in the tc qdisc creation command, which in turn corresponds to
the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit.
The important detail here is the clockid which is implicitly /dev/ptpN
for full offload, and hence not configurable.
A reference counting API is added to support the use case where Ethernet
drivers need to keep the taprio offload structure locally (i.e. they are
a multi-port switch driver, and configuring a port depends on the
settings of other ports as well). The refcount_t variable is kept in a
private structure (__tc_taprio_qopt_offload) and not exposed to drivers.
In the future, the private structure might also be expanded with a
backpointer to taprio_sched *q, to implement the notification system
described in the patch (of when admin became oper, or an error occurred,
etc, so the offload can be monitored with 'tc qdisc show').
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new CONFIG_CIFS_ROOT option to handle root file systems
over a SMB share.
In order to mount the root file system during the init process, make
cifs.ko perform non-blocking socket operations while mounting and
accessing it.
Cc: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull pidfd/waitid updates from Christian Brauner:
"This contains two features and various tests.
First, it adds support for waiting on process through pidfds by adding
the P_PIDFD type to the waitid() syscall. This completes the basic
functionality of the pidfd api (cf. [1]). In the meantime we also have
a new adition to the userspace projects that make use of the pidfd
api. The qt project was nice enough to send a mail pointing out that
they have a pr up to switch to the pidfd api (cf. [2]).
Second, this tag contains an extension to the waitid() syscall to make
it possible to wait on the current process group in a race free manner
(even though the actual problem is very unlikely) by specifing 0
together with the P_PGID type. This extension traces back to a
discussion on the glibc development mailing list.
There are also a range of tests for the features above. Additionally,
the test-suite which detected the pidfd-polling race we fixed in [3]
is included in this tag"
[1] https://lwn.net/Articles/794707/
[2] https://codereview.qt-project.org/c/qt/qtbase/+/108456
[3] commit b191d6491b ("pidfd: fix a poll race when setting exit_state")
* tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
waitid: Add support for waiting for the current process group
tests: add pidfd poll tests
tests: move common definitions and functions into pidfd.h
pidfd: add pidfd_wait tests
pidfd: add P_PIDFD to waitid()
Neal Cardwell mentioned that snd_wnd would be useful for diagnosing TCP
performance problems --
> (1) Usually when we're diagnosing TCP performance problems, we do so
> from the sender, since the sender makes most of the
> performance-critical decisions (cwnd, pacing, TSO size, TSQ, etc).
> From the sender-side the thing that would be most useful is to see
> tp->snd_wnd, the receive window that the receiver has advertised to
> the sender.
This serves the purpose of adding an additional __u32 to avoid the
would-be hole caused by the addition of the tcpi_rcvi_ooopack field.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For receive-heavy cases on the server-side, we want to track the
connection quality for individual client IPs. This counter, similar to
the existing system-wide TCPOFOQueue counter in /proc/net/netstat,
tracks out-of-order packet reception. By providing this counter in
TCP_INFO, it will allow understanding to what degree receive-heavy
sockets are experiencing out-of-order delivery and packet drops
indicating congestion.
Please note that this is similar to the counter in NetBSD TCP_INFO, and
has the same name.
Also note that we avoid increasing the size of the tcp_sock struct by
taking advantage of a hole.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit introduces a new ioctl DM_GET_TARGET_VERSION. It will load a
target that is specified in the "name" entry in the parameter structure
and return its version.
This functionality is intended to be used by cryptsetup, so that it can
query kernel capabilities before activating the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-09-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Now that initial BPF backend for gcc has been merged upstream, enable
BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to
bpf_sysctl.file_pos, from Ilya.
2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions
related to recent work on exposing BTF info through sysfs, from Andrii.
3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem
headroom to be added twice, from Ciara.
4) Refactoring work to convert sock opt tests into test_progs framework
in BPF kselftests, from Stanislav.
5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke.
6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
