You do not need to decide the buffer size statically.
Use getline() to grow the line buffer as needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
For W=2, we can enable more kernel-doc warnings,
such as missing return value descriptions etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The kernel-doc script currently reports a number of issues
only in "verbose" mode, but that's initialized from V=1
(via KBUILD_VERBOSE), so if you use KDOC_WERROR=1 then
adding V=1 might actually break the build. This is rather
unexpected.
Change kernel-doc to not change its behaviour wrt. errors
(or warnings) when verbose mode is enabled, but rather add
separate warning flags (and -Wall) for it. Allow enabling
those flags via environment/make variables in the kernel's
build system for easier user use, but to not have to parse
them in the script itself.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The > comparison should be >= to prevent an out of bounds array
access.
Fixes: 52dc0595d5 ("modpost: handle relocations mismatch in __ex_table.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
streamline_config.pl currently searches for CONFIG options in Kconfig
files as $(CONFIG_FOO). But some Kconfigs (e.g. thunderbolt) use
${CONFIG_FOO}. So fix up the regex to accept both.
This fixes:
$ make LSMOD=`pwd/`/lsmod localmodconfig
using config: '.config'
thunderbolt config not found!!
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After commit feb843a469 ("kbuild: add $(CLANG_FLAGS) to
KBUILD_CPPFLAGS"), there is an error while building certain PowerPC
assembly files with clang:
arch/powerpc/lib/copypage_power7.S: Assembler messages:
arch/powerpc/lib/copypage_power7.S:34: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:35: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:37: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:38: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:40: Error: junk at end of line: `0b01010'
clang: error: assembler command failed with exit code 1 (use -v to see invocation)
as-option only uses KBUILD_AFLAGS, so after removing CLANG_FLAGS from
KBUILD_AFLAGS, there is no more '--target=' or '--prefix=' flags. As a
result of those missing flags, the host target
will be tested during as-option calls and likely fail, meaning necessary
flags may not get added when building assembly files, resulting in
errors like seen above.
Add KBUILD_CPPFLAGS to as-option invocations to clear up the errors.
This should have been done in commit d5c8d6e0fa ("kbuild: Update
assembler calls to use proper flags and language target"), which
switched from using the assembler target to the assembler-with-cpp
target, so flags that affect preprocessing are passed along in all
relevant tests. as-option now mirrors cc-option.
Fixes: feb843a469 ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYs=koW9WardsTtora+nMgLR3raHz-LSLr58tgX4T5Mxag@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Similarly to "__kvm_nvhe_", filter out any local symbol that was
prefixed with "__pi_" (generated when CONFIG_RANDOMIZE_BASE=y) when
compiling System.map and in kallsyms.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The backslash characters escaping '$' in the command to sed (intended to
prevent it from interpreting '$' as "end-of-line") are currently being
consumed by the Shell (where they mean that sh should not evaluate what
follows '$' as a variable name). This means that
sed -e "/ \$/d"
executes the script
/ $/d
instead of the intended
/ \$/d
So escape twice in mksysmap any '$' that actually needs to reach sed
escaped so that the backslash survives the Shell.
Fixes: c4802044a0 ("scripts/mksysmap: use sed with in-line comments")
Fixes: 320e7c9d44 ("scripts/kallsyms: move compiler-generated symbol patterns to mksysmap")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
"No build warning" is a strong requirement these days, so you must fix
all issues before enabling a new warning flag.
We often add a new warning to W=1 first so that the kbuild test robot
blocks new breakages.
This commit allows modpost to show extra warnings only when W=1
(or KBUILD_EXTRA_WARN=1) is given.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When preprocessing arch/*/kernel/vmlinux.lds.S, the target triple is
not passed to $(CPP) because we add it only to KBUILD_{C,A}FLAGS.
As a result, the linker script is preprocessed with predefined macros
for the build host instead of the target.
Assuming you use an x86 build machine, compare the following:
$ clang -dM -E -x c /dev/null
$ clang -dM -E -x c /dev/null -target aarch64-linux-gnu
There is no actual problem presumably because our linker scripts do not
rely on such predefined macros, but it is better to define correct ones.
Move $(CLANG_FLAGS) to KBUILD_CPPFLAGS, so that all *.c, *.S, *.lds.S
will be processed with the proper target triple.
[Note]
After the patch submission, we got an actual problem that needs this
commit. (CBL issue 1859)
Link: https://github.com/ClangBuiltLinux/linux/issues/1859
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following errors appear multiple times when
building ARCH=powerpc powernv_defconfig:
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12d4): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717520 is not in [-2147483648, 2147483647]; references '__start___soft_mask_table'
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12e8): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717392 is not in [-2147483648, 2147483647]; references '__stop___soft_mask_table'
Diffing the .o.cmd files reveals that -DHAVE_AS_ATHIGH=1 is not present
anymore, because as-instr only uses KBUILD_AFLAGS, which will no longer
contain '--target'.
Mirror Kconfig's as-instr and add CLANG_FLAGS explicitly to the
invocation to ensure the target information is always present.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For ARM, modpost fails to detect some types of section mismatches.
[test code]
.section .init.data,"aw"
bar:
.long 0
.section .data,"aw"
.globl foo
foo:
.long bar - .
It is apparently a bad reference, but modpost does not report anything.
The test code above produces the following relocations.
Relocation section '.rel.data' at offset 0xe8 contains 1 entry:
Offset Info Type Sym.Value Sym. Name
00000000 00000403 R_ARM_REL32 00000000 .init.data
Currently, R_ARM_REL32 is just skipped.
Handle it like R_ARM_ABS32.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
addend_arm_rel() processes R_ARM_THM_CALL, R_ARM_THM_JUMP24,
R_ARM_THM_JUMP19 in a wrong way.
Here, test code.
[test code for R_ARM_THM_JUMP24]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
b bar
[test code for R_ARM_THM_CALL]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
push {lr}
bl bar
pop {pc}
If you compile it with CONFIG_THUMB2_KERNEL=y, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)
(You need to use GNU linker instead of LLD to reproduce it.)
Fix the code to make modpost show the correct symbol name. I checked
arch/arm/kernel/module.c to learn the encoding of R_ARM_THM_CALL and
R_ARM_THM_JUMP24. The module does not support R_ARM_THM_JUMP19, but
I checked its encoding in ARM ARM.
The '+4' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].
"If the relocation is pc-relative then compensation for the PC bias
(the PC value is 8 bytes ahead of the executing instruction in Arm
state and 4 bytes in Thumb state) must be encoded in the relocation
by the object producer."
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Fixes: c9698e5cd6 ("ARM: 7964/1: Detect section mismatches in thumb relocations")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_THUMB2_KERNEL is enabled, modpost fails to detect some
types of section mismatches.
[test code]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
It is apparently a bad reference, but modpost does not report anything.
The test code above produces the following relocations.
Relocation section '.rel.text' at offset 0x1e8 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
00000000 0000052f R_ARM_THM_MOVW_AB 00000000 .LANCHOR0
00000004 00000530 R_ARM_THM_MOVT_AB 00000000 .LANCHOR0
Currently, R_ARM_THM_MOVW_ABS_NC and R_ARM_THM_MOVT_ABS are just skipped.
Add code to handle them. I checked arch/arm/kernel/module.c to learn
how the offset is encoded in the instruction.
One more thing to note for Thumb instructions - the st_value is an odd
value, so you need to mask the bit 0 to get the offset. Otherwise, you
will get an off-by-one error in the nearest symbol look-up.
It is documented in "ELF for the ARM Architecture" [1]:
In addition to the normal rules for symbol values the following rules
shall also apply to symbols of type STT_FUNC:
* If the symbol addresses an Arm instruction, its value is the
address of the instruction (in a relocatable object, the offset
of the instruction from the start of the section containing it).
* If the symbol addresses a Thumb instruction, its value is the
address of the instruction with bit zero set (in a relocatable
object, the section offset with bit zero set).
* For the purposes of relocation the value used shall be the address
of the instruction (st_value & ~1).
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
find_fromsym() and find_tosym() are similar - both of them iterate
in the .symtab section and return the nearest symbol.
The difference between them is that find_tosym() allows a negative
distance, but the distance must be less than 20.
Factor out the common part into find_nearest_sym().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
For ARM defconfig (i.e. multi_v7_defconfig), modpost fails to detect
some types of section mismatches.
[test code]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
It is apparently a bad reference, but modpost does not report anything.
The test code above produces the following relocations.
Relocation section '.rel.text' at offset 0x200 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
00000000 0000062b R_ARM_MOVW_ABS_NC 00000000 .LANCHOR0
00000004 0000062c R_ARM_MOVT_ABS 00000000 .LANCHOR0
Currently, R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS are just skipped.
Add code to handle them. I checked arch/arm/kernel/module.c to learn
how the offset is encoded in the instruction.
The referenced symbol in relocation might be a local anchor.
If is_valid_name() returns false, let's search for a better symbol name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a
wrong way.
Here, test code.
[test code for R_ARM_JUMP24]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
b bar
[test code for R_ARM_CALL]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
push {lr}
bl bar
pop {pc}
If you compile it with ARM multi_v7_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)
(You need to use GNU linker instead of LLD to reproduce it.)
Fix the code to make modpost show the correct symbol name.
I imported (with adjustment) sign_extend32() from include/linux/bitops.h.
The '+8' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].
"If the relocation is pc-relative then compensation for the PC bias
(the PC value is 8 bytes ahead of the executing instruction in Arm
state and 4 bytes in Thumb state) must be encoded in the relocation
by the object producer."
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Fixes: 6e2e340b59 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
addend_arm_rel() processes R_ARM_ABS32 in a wrong way.
Here, test code.
[test code 1]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)
(You need to use GNU linker instead of LLD to reproduce it.)
If you compile it for other architectures, modpost will show the correct
symbol name.
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.
I just mimicked the code in arch/arm/kernel/module.c.
However, there is more difficulty for ARM.
Here, test code.
[test code 2]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
int __initdata bar;
int get_bar(void) { return bar; }
With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)
The reference from 'get_bar' to 'foo' seems wrong.
I have no solution for this because it is true in assembly level.
In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.
Disassembly of section .text:
00000000 <get_foo>:
0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc>
4: e5930000 ldr r0, [r3]
8: e12fff1e bx lr
c: 00000000 .word 0x00000000
00000010 <get_bar>:
10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc>
14: e5930004 ldr r0, [r3, #4]
18: e12fff1e bx lr
1c: 00000000 .word 0x00000000
Relocation section '.rel.text' at offset 0x244 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
0000000c 00000c02 R_ARM_ABS32 00000000 .init.data
0000001c 00000c02 R_ARM_ABS32 00000000 .init.data
When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.
I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is no distinction between TEXT_TO_ANY_EXIT and DATA_TO_ANY_EXIT.
Just merge them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This check is unneeded. Without it, sec_name() will returns the null
string "", then section_mismatch() will return immediately.
Anyway, special section indices rarely appear in these loops.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
r_offset/r_addend holds the offset address from/to which a symbol is
referenced. It is unclear unless you are familiar with ELF.
Rename them to faddr, taddr, respectively. The prefix 'f' means 'from',
't' means 'to'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
find_tosym() takes 'sym' and stores the return value to another
variable 'to'. You can use the same variable because we want to
replace the original one when appropriate.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This reverts commit a4d26f1a09.
The variable 'fromsym' never starts with ".L" since commit 87e5b1e8f2
("module: Sync code of is_arm_mapping_symbol()").
In other words, Pattern 6 is now dead code.
Previously, the .LANCHOR1 hid the symbols listed in Pattern 2.
87e5b1e8f2 provided a better solution.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
gtags considers any file outside of its current working directory
"outside the source tree" and refuses to index it. For O= kernel builds,
or when "make" is invoked from a directory other then the kernel source
tree, gtags ignores the entire kernel source and generates an empty
index.
Force-set gtags current working directory to the kernel source tree.
Due to commit 9da0763bdd ("kbuild: Use relative path when building in
a subdir of the source tree"), if the kernel build is done in a
sub-directory of the kernel source tree, the kernel Makefile will set
the kernel's $srctree to ".." for shorter compile-time and run-time
warnings. Consequently, the list of files to be indexed will be in the
"../*" form, rendering all such paths invalid once gtags switches to the
kernel source tree as its current working directory.
If gtags indexing is requested and the build directory is not the kernel
source tree, index all files in absolute-path form.
Note, indexing in absolute-path form will not affect the generated
index, as paths in gtags indices are always relative to the gtags "root
directory" anyway (as evidenced by "gtags --dump").
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
find_elf_symbol() and find_elf_symbol2() are not good names.
Rename them to find_tosym(), find_fromsym(), respectively.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
find_elf_symbol2() converts the section index to the section name,
then compares the two strings in each iteration. This is slow.
It is faster to compare the section indices (i.e. integers) directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
default_mismatch_handler() does not need to compute 'tosec' because
it is calculated by the caller.
Pass it down to default_mismatch_handler() instead of calling
sec_name() twice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Merging these two reduces several lines of code. The extable section
mismatch is already distinguished by EXTABLE_TO_NON_TEXT.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
SHF_EXECINSTR is a bit flag (#define SHF_EXECINSTR 0x4).
Compare the masked flag to '!= 0'.
There is no good reason to stop modpost immediately even if a special
section index is given. You will get a section mismatch error anyway.
Also, change the return type to bool.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
report_sec_mismatch() and default_mismatch_handler() are small enough
to be merged together.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Collect relevant code into one place to clarify all the cases are
covered by 'if () ... else if ... else ...'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This is the last user of get_pretty_name() - it is just used to
distinguish whether the symbol is a function or not. It is not
valuable information.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
report_extable_warnings() prints "from" in a pretty form, but we know
it is always located in the __ex_table section, i.e. a collection of
struct exception_table_entry.
It is very likely to fail to get the symbol name and ends up with
meaningless message:
... in reference from the (unknown reference) (unknown) to ...
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
find_extable_entry_size() is completely broken. It has awesome comments
about how to calculate sizeof(struct exception_table_entry).
It was based on these assumptions:
- struct exception_table_entry has two fields
- both of the fields have the same size
Then, we came up with this equation:
(offset of the second field) * 2 == (size of struct)
It was true for all architectures when commit 52dc0595d5 ("modpost:
handle relocations mismatch in __ex_table.") was applied.
Our mathematics broke when commit 548acf1923 ("x86/mm: Expand the
exception table logic to allow new handling options") introduced the
third field.
Now, the definition of exception_table_entry is highly arch-dependent.
For x86, sizeof(struct exception_table_entry) is apparently 12, but
find_extable_entry_size() sets extable_entry_size to 8.
I could fix it, but I do not see much value in this code.
extable_entry_size is used just for selecting a slightly different
error message.
If the first field ("insn") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
it is not possible for the kernel to fault
at that address. Something is seriously wrong
and should be fixed.
If the second field ("fixup") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
Merge the two error messages rather than adding even more complexity.
Change fatal() to error() to make it continue running and catch more
possible errors.
Fixes: 548acf1923 ("x86/mm: Expand the exception table logic to allow new handling options")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The section mismatch check relies on the relocation entries.
For REL, the addend value is implicit, so we need some code to compute
it. Currently, EM_386, EM_ARM, and EM_MIPS are supported. This commit
makes sure we covered all the cases.
I believe the other architectures use RELA, where the explicit r_addend
field exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As a follow up to the series allowing DTB overlays to built from .dtso
files. Now that all overlays have been renamed, remove the ability to
build from overlays from .dts files to prevent any files with the old
name from accidental being added.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
The deprecation for register_sysctl_paths() is over. We can rejoice as
we nuke register_sysctl_paths(). The routine register_sysctl_table()
was the only user left of register_sysctl_paths(), so we can now just
open code and move the implementation over to what used to be
to __register_sysctl_paths().
The old dynamic struct ctl_table_set *set is now the point to
sysctl_table_root.default_set.
The old dynamic const struct ctl_path *path was being used in the
routine register_sysctl_paths() with a static:
static const struct ctl_path null_path[] = { {} };
Since this is a null path we can now just simplfy the old routine
and remove its use as its always empty.
This saves us a total of 230 bytes.
$ ./scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 2/7 grow/shrink: 1/1 up/down: 1015/-1245 (-230)
Function old new delta
register_leaf_sysctl_tables.constprop - 524 +524
register_sysctl_table 22 497 +475
__pfx_register_leaf_sysctl_tables.constprop - 16 +16
null_path 8 - -8
__pfx_register_sysctl_paths 16 - -16
__pfx_register_leaf_sysctl_tables 16 - -16
__pfx___register_sysctl_paths 16 - -16
__register_sysctl_base 29 12 -17
register_sysctl_paths 18 - -18
register_leaf_sysctl_tables 534 - -534
__register_sysctl_paths 620 - -620
Total: Before=21259666, After=21259436, chg -0.00%
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Pull Kbuild updates from Masahiro Yamada:
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: specify targets in debian/rules as .PHONY
sparc: unify sparc32/sparc64 archhelp
kbuild: rpm-pkg: remove kernel-drm PROVIDES
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
kbuild: add srcdeb-pkg target
Makefile: use -z pack-relative-relocs
kbuild: clang: do not use CROSS_COMPILE for target triple
kconfig: menuconfig: reorder functions to remove forward declarations
kconfig: menuconfig: remove unused M_EVENT macro
kconfig: menuconfig: remove OLD_NCURSES macro
kbuild: builddeb: Eliminate debian/arch use
scripts/kallsyms: update the usage in the comment block
scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
scripts/kallsyms: change the output order
scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
scripts/kallsyms: exclude symbols generated by itself dynamically
scripts/mksysmap: use sed with in-line comments
scripts/mksysmap: remove comments described in nm(1)
scripts/kallsyms: remove redundant code for omitting U and N
kallsyms: expand symbol name into comment for debugging
Pull rust updates from Miguel Ojeda
"More additions to the Rust core. Importantly, this adds the pin-init
API, which will be used by other abstractions, such as the
synchronization ones added here too:
- pin-init API: a solution for the safe pinned initialization
problem.
This allows to reduce the need for 'unsafe' code in the kernel when
dealing with data structures that require a stable address. Commit
90e53c5e70 ("rust: add pin-init API core") contains a nice
introduction -- here is an example of how it looks like:
#[pin_data]
struct Example {
#[pin]
value: Mutex<u32>,
#[pin]
value_changed: CondVar,
}
impl Example {
fn new() -> impl PinInit<Self> {
pin_init!(Self {
value <- new_mutex!(0),
value_changed <- new_condvar!(),
})
}
}
// In a `Box`.
let b = Box::pin_init(Example::new())?;
// In the stack.
stack_pin_init!(let s = Example::new());
- 'sync' module:
New types 'LockClassKey' ('struct lock_class_key'), 'Lock',
'Guard', 'Mutex' ('struct mutex'), 'SpinLock' ('spinlock_t'),
'LockedBy' and 'CondVar' (uses 'wait_queue_head_t'), plus macros
such as 'static_lock_class!' and 'new_spinlock!'.
In particular, 'Lock' and 'Guard' are generic implementations that
contain code that is common to all locks. Then, different backends
(the new 'Backend' trait) are implemented and used to define types
like 'Mutex':
type Mutex<T> = Lock<T, MutexBackend>;
In addition, new methods 'assume_init()', 'init_with()' and
'pin_init_with()' for 'UniqueArc<MaybeUninit<T>>' and 'downcast()'
for 'Arc<dyn Any + Send + Sync>'; as well as 'Debug' and 'Display'
implementations for 'Arc' and 'UniqueArc'. Reduced stack usage of
'UniqueArc::try_new_uninit()', too.
- 'types' module:
New trait 'AlwaysRefCounted' and new type 'ARef' (an owned
reference to an always-reference-counted object, meant to be used
in wrappers for C types that have their own ref counting
functions).
Moreover, new associated functions 'raw_get()' and 'ffi_init()' for
'Opaque'.
- New 'task' module with a new type 'Task' ('struct task_struct'),
and a new macro 'current!' to safely get a reference to the current
one.
- New 'ioctl' module with new '_IOC*' const functions (equivalent to
the C macros).
- New 'uapi' crate, intended to be accessible by drivers directly.
- 'macros' crate: new 'quote!' macro (similar to the one provided in
userspace by the 'quote' crate); and the 'module!' macro now allows
specifying multiple module aliases.
- 'error' module:
New associated functions for the 'Error' type, such as
'from_errno()' and new functions such as 'to_result()'.
- 'alloc' crate:
More fallible 'Vec' methods: 'try_resize` and
'try_extend_from_slice' and the infrastructure (imported from the
Rust standard library) they need"
* tag 'rust-6.4' of https://github.com/Rust-for-Linux/linux: (44 commits)
rust: ioctl: Add ioctl number manipulation functions
rust: uapi: Add UAPI crate
rust: sync: introduce `CondVar`
rust: lock: add `Guard::do_unlocked`
rust: sync: introduce `LockedBy`
rust: introduce `current`
rust: add basic `Task`
rust: introduce `ARef`
rust: lock: introduce `SpinLock`
rust: lock: introduce `Mutex`
rust: sync: introduce `Lock` and `Guard`
rust: sync: introduce `LockClassKey`
MAINTAINERS: add Benno Lossin as Rust reviewer
rust: init: broaden the blanket impl of `Init`
rust: sync: add functions for initializing `UniqueArc<MaybeUninit<T>>`
rust: sync: reduce stack usage of `UniqueArc::try_new_uninit`
rust: types: add `Opaque::ffi_init`
rust: prelude: add `pin-init` API items to prelude
rust: init: add `Zeroable` trait and `init::zeroed` function
rust: init: add `stack_pin_init!` macro
...
All xchg() and cmpxchg() ops are atomic RMWs, but currently we
instrument these with instrument_atomic_write() rather than
instrument_atomic_read_write(), missing the read aspect.
Similarly, all try_cmpxchg() ops are non-atomic RMWs on *oldp, but we
instrument these accesses with instrument_atomic_write() rather than
instrument_read_write(), missing the read aspect and erroneously marking
these as atomic.
Fix the instrumentation for both points.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20230413160644.490976-1-mark.rutland@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
Pull tracing updates from Steven Rostedt:
- User events are finally ready!
After lots of collaboration between various parties, we finally
locked down on a stable interface for user events that can also work
with user space only tracing.
This is implemented by telling the kernel (or user space library, but
that part is user space only and not part of this patch set), where
the variable is that the application uses to know if something is
listening to the trace.
There's also an interface to tell the kernel about these events,
which will show up in the /sys/kernel/tracing/events/user_events/
directory, where it can be enabled.
When it's enabled, the kernel will update the variable, to tell the
application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines.
Direct trampolines use the ftrace interface but instead of jumping to
the ftrace trampoline, applications (mostly BPF) can register their
own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient
than kprobes, as it does not need to save all the registers that
kprobes on ftrace do. More work needs to be done before the fprobes
will be exposed as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
line by line instead of all at once.
There are users in production kernels that have a large data dump
that originally used printk() directly, but the data dump was larger
than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions
that was every traced by ftrace or a direct trampoline. This is used
for debugging issues where a traced function could have caused a
crash by a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields
of the events. It's easier to read by humans.
- Some minor fixes and clean ups.
* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
ring-buffer: Sync IRQ works before buffer destruction
tracing: Add missing spaces in trace_print_hex_seq()
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
recordmcount: Fix memory leaks in the uwrite function
tracing/user_events: Limit max fault-in attempts
tracing/user_events: Prevent same address and bit per process
tracing/user_events: Ensure bit is cleared on unregister
tracing/user_events: Ensure write index cannot be negative
seq_buf: Add seq_buf_do_printk() helper
tracing: Fix print_fields() for __dyn_loc/__rel_loc
tracing/user_events: Set event filter_type from type
ring-buffer: Clearly check null ptr returned by rb_set_head_page()
tracing: Unbreak user events
tracing/user_events: Use print_format_fields() for trace output
tracing/user_events: Align structs with tabs for readability
tracing/user_events: Limit global user_event count
tracing/user_events: Charge event allocs to cgroups
tracing/user_events: Update documentation for ABI
tracing/user_events: Use write ABI in example
tracing/user_events: Add ABI self-test
...
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
Pull non-MM updates from Andrew Morton:
"Mainly singleton patches all over the place.
Series of note are:
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas"
* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
mailmap: add entries for Paul Mackerras
libgcc: add forward declarations for generic library routines
mailmap: add entry for Oleksandr
ocfs2: reduce ioctl stack usage
fs/proc: add Kthread flag to /proc/$pid/status
ia64: fix an addr to taddr in huge_pte_offset()
checkpatch: introduce proper bindings license check
epoll: rename global epmutex
scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
scripts/gdb: create linux/vfs.py for VFS related GDB helpers
uapi/linux/const.h: prefer ISO-friendly __typeof__
delayacct: track delays from IRQ/SOFTIRQ
scripts/gdb: timerlist: convert int chunks to str
scripts/gdb: print interrupts
scripts/gdb: raise error with reduced debugging information
scripts/gdb: add a Radix Tree Parser
lib/rbtree: use '+' instead of '|' for setting color.
proc/stat: remove arch_idle_time()
checkpatch: check for misuse of the link tags
checkpatch: allow Closes tags with links
...
