The variable j is set, however never used in or outside the loop, thus
resulting in dead code.
Building with GCC 16 results in a build error due to
-Werror=unused-but-set-variable= enabled by default.
This patch clean up the dead code and fixes the build error.
Example build log:
drivers/gpu/drm/tegra/sor.c:1867:19: error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=]
1867 | size_t i, j;
| ^
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250901212020.3757519-1-listout@listout.xyz
Before exporting a buffer, make sure it has been populated with
pages at least once.
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-4-airlied@gmail.com
Before exporting a buffer, make sure it has been populated with
pages at least once.
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-3-airlied@gmail.com
Before exporting a buffer, make sure it has been populated with
pages at least once.
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-2-airlied@gmail.com
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-1-airlied@gmail.com
On systems with multiple GPUs there can be uncertainty which GPU is the
primary one used to drive the display at bootup. In some desktop
environments this can lead to increased power consumption because
secondary GPUs may be used for rendering and never go to a low power
state. In order to disambiguate this add a new sysfs attribute
'boot_display' that uses the output of video_is_primary_device() to
populate whether the PCI device was used for driving the display.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://gitlab.freedesktop.org/xorg/lib/libpciaccess/-/issues/23
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250811162606.587759-5-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Gma500 unnecessarily clears the framebuffer's GEM-object pointer
before calling drm_framebuffer_cleanup(). Remove this code to make
gma500 consistent with the rest of the drivers.
The change is cosmetic, as drm_framebuffer_cleanup() does not
touch the object pointer on gma500.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250904121157.395128-1-tzimmermann@suse.de
The DRM subsystem has a set of preferred, prefixed logging functions
(drm_info, drm_warn, drm_err) which improve debuggability by including
the driver and function name in the log output.
As part of the ongoing effort to modernize logging calls,
convert a dev_err() call in the bochs hardware initialization
function to its drm_err() equivalent.
This work was suggested by the DRM TODO list.
Signed-off-by: Leander Kieweg <kieweg.leander@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250818113530.187440-1-kieweg.leander@gmail.com
Implement support for DSI command transfer. Transmission of both Short
Packet and Long Packet is implemented, so is command transmission to
request response from peripheral device and transmission of non-read
command with BTA.
The AXI memory access mode is currently not implemented, each transfer
is performed purely using controller register interface. Short Packet
transfer can transfer up to 2 Bytes of data, Long Packet transfer can
transfer up to 16 Bytes of data.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250831190507.327848-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The only place in the ast driver that uses the DRAM type is the
P2A DRAM initialization for Gen2 and Gen3 of the chip. Condense
the code in ast_get_dram_info() to exactly this use case and move
it into the Gen's custom source file. Remove the field dram_type
from struct ast_device.
The AST_DRAM_ constants are also used in Gen4 POST helpers, but
independently from the dram_type field. No changes there.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250826065032.344412-6-tzimmermann@suse.de
On the SteamOS kernel, Valve universally makes minimum brightness 0
for all devices. SteamOS is (was?) meant for the Steam Deck, so
enabling it universally is reasonable. However, it causes issues in
certain devices. Therefore, introduce it just for the Steam Deck here.
SteamOS kernel does not have a public mirror, but this replaces commit
806dd74bb225 ("amd/drm: override backlight min value from 12 -> 0")
in the latest, as of this writing, SteamOS kernel (6.11.11-valve24).
See unofficial mirror reconstructed from sources below.
Link: https://gitlab.com/evlaV/linux-integration/-/commit/806dd74bb225
Reviewed-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-6-lkml@antheas.dev
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Certain OLED devices malfunction on specific brightness levels.
Specifically, when DP_SOURCE_BACKLIGHT_LEVEL is written to with
the first byte being 0x00 and sometimes 0x01, the panel forcibly
turns off until the device sleeps again.
Below are some examples. This was found by iterating over brighness
ranges while printing DP_SOURCE_BACKLIGHT_LEVEL. It was found that
the screen would malfunction on specific values, and some of them
were collected.
Therefore, introduce a quirk where the minor byte of brightness is
OR'd with 0x03 to avoid the range of invalid values.
This quirk was tested by removing the workarounds and iterating
from 0 to 50_000 value ranges with a cadence of 0.2s/it. The
range of the panel is 1000...400_000, so the values were slightly
interpolated during testing. The custom brightness curve added on
6.15 was disabled.
86016: 10101000000000000
86272: 10101000100000000
87808: 10101011100000000
251648: 111101011100000000
251649: 111101011100000001
86144: 10101000010000000
87809: 10101011100000001
251650: 111101011100000010
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3803
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-5-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
After a recent series to use FIELD_PREP and FIELD_MODIFY in
tidss_dispc.c, there are many errors when bitfield.h is not implicitly
included, such as when building allmodconfig for ARCH=hexagon:
drivers/gpu/drm/tidss/tidss_dispc.c:1116:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1116 | VP_REG_FLD_MOD(dispc, hw_videoport, DISPC_VP_CONTROL, v,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:631:3: note: expanded from macro 'VP_REG_FLD_MOD'
631 | FIELD_MODIFY((mask), &_reg, (val)); \
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1140:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1140 | FIELD_MODIFY(DISPC_VP_DSS_OLDI_CFG_MAP_MASK, &oldi_cfg,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1203:10: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1203 | FIELD_PREP(DISPC_VP_TIMING_H_SYNC_PULSE_MASK, hsw - 1) |
| ^
...
Explicitly include bitfield.h to resolve the errors.
Fixes: 9accc8b10d ("drm/tidss: dispc: Get rid of FLD_VAL")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-tidss-fix-missing-bitfield-h-v1-1-aaad4a285f98@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
