Pull vdso updates from Thomas Gleixner:
- Remove the redundant CONFIG_GENERIC_TIME_VSYSCALL after converting
the remaining users over.
- Rework and sanitize the MIPS VDSO handling, so it does not handle the
time related VDSO if there is no VDSO capable clocksource available.
Also stop mapping VDSO data pages unconditionally even if there is no
usage possible.
* tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
MIPS: VDSO: Fold MIPS_CLOCK_VSYSCALL into MIPS_GENERIC_GETTIMEOFDAY
MIPS: VDSO: Gate microMIPS restriction on GCC version
MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY
clocksource/drivers/mips-gic-timer: Only use VDSO_CLOCKMODE_GIC when it is a available
MIPS: csrc-r4k: Only use VDSO_CLOCKMODE_R4K when it is a available
MIPS: VDSO: Only map the data pages when the vDSO is used
MIPS: Introduce Kconfig MIPS_GENERIC_GETTIMEOFDAY
vdso/datastore: Always provide symbol declarations
MAINTAINERS: Add include/linux/vdso_datastore.h to vDSO block
vdso/gettimeofday: Rename __arch_get_vdso_u_timens_data()
vdso/treewide: Drop GENERIC_TIME_VSYSCALL
vdso/vsyscall: Gate update_vsyscall() behind CONFIG_GENERIC_GETTIMEOFDAY
riscv: vdso: Drop CONFIG_GENERIC_TIME_VSYSCALL guard around syscall fallbacks
Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
Pull misc kernel updates from Christian Brauner:
"Fixes
- rhashtable: give each instance its own lockdep class
syzbot reported a circular locking dependency between ht->mutex and
fs_reclaim via the simple_xattrs rhashtable being torn down during
inode eviction.
The predicted deadlock cannot occur: rhashtable_free_and_destroy()
cancels the deferred worker before taking ht->mutex and
acquisitions on distinct rhashtables are on distinct mutexes.
Lockdep flags a cycle anyway because every ht->mutex in the kernel
shared the single static lockdep class from
rhashtable_init_noprof().
The lockdep key is lifted to a per-call-site static key so every
rhashtable instance gets its own class.
- selftests/clone3: fix misuse of the libcap library interface in the
cap_checkpoint_restore test and remove unused variables
- selftests/pid_namespace: compute the pid_max test limits
dynamically instead of hardcoding values below the kernel-enforced
minimum of PIDS_PER_CPU_MIN * num_possible_cpus() which made the
tests fail on machines with many possible CPUs
- selftests: fix the Makefile TARGETS entry for nsfs which wasn't
adjusted when the tests moved under filesystems/
Cleanups
- ipc/sem.c: use unsigned int for nsops to match the declaration in
syscalls.h"
* tag 'kernel-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/clone3: remove unused variables
selftests/clone3: fix libcap interface usage
ipc/sem.c: use unsigned int for nsops
selftests: Fix Makefile target for nsfs
rhashtable: give each instance its own lockdep class
selftests/pid_namespace: compute pid_max test limits dynamically
Pull debugobjects fix from Ingo Molnar:
- Fix potential debugobjects deadlock on PREEMPT_RT kernels (Waiman
Long)
* tag 'core-urgent-2026-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Don't call fill_pool() in early boot hardirq context
When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.
During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool
This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.
Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context.
Fixes: 06e0ae988f ("debugobjects: Allow to refill the pool before SYSTEM_SCHEDULING")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260605173038.495075-1-longman@redhat.com
gcc-16 has gained some more advanced inter-procedual optimization
techniques that enable it to inline the dummy_tlb_add_page() and
dummy_tlb_flush() function pointers into a specialized version of
__arm_v7s_unmap:
WARNING: modpost: vmlinux: section mismatch in reference: __arm_v7s_unmap+0x2cc (section: .text) -> dummy_tlb_add_page (section: .init.text)
ERROR: modpost: Section mismatches detected.
>From what I can tell, the transformation is correct, as this is only
called when __arm_v7s_unmap() is called from arm_v7s_do_selftests(),
which is also __init. Since __arm_v7s_unmap() however is not __init,
gcc cannot inline the inner function calls directly.
In debug_objects_selftest(), the same thing happens. Both the
caller and the leaf function are __init, but the IPA pulls
it into a non-init one:
WARNING: modpost: vmlinux: section mismatch in reference: lookup_object_or_alloc+0x7c (section: .text.lookup_object_or_alloc) -> is_static_object (section: .init.text)
Marking the affected functions as not "__init" would reliably avoid this
issue but is not a good solution because it removes an otherwise correct
annotation. I tried marking the functions as 'noinline', but that ended
up not covering all the affected configurations.
With some more experimenting, I found that marking these functions as
__attribute__((noipa)) is both logical and reliable.
In order to keep the syntax readable, add a custom macro for this in
include/linux/compiler_attributes.h next to other related macros and
use it to annotate both files.
Link: https://lore.kernel.org/all/abRB6g-48ZX6Yl2r@willie-the-truck/
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Pull kunit fix from Shuah Khan:
"Fix a use-after-free in kunit debugfs when using kunit.filter when the
executor frees dynamically allocated resources after running boot-time
tests. This resulted in fatal hardware exception due to invalidation
of capability flags on the reclaimed memory on some architectures such
as CHERI RISC-V that support the feature, and silent memory corruption
on others.
The fix for this couples the lifetime of the filtered suite memory
allocation to the lifetime of the kunit subsystem and its associated
VFS nodes. Ownership of the boot-time suite_set is now transferred to
a global tracker ('kunit_boot_suites'), and the memory is cleanly
released in kunit_exit() during module teardown"
* tag 'linux_kselftest-kunit-fixes-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix use-after-free in debugfs when using kunit.filter
Pull debugobjects fix from Ingo Molnar::
- Fix debugobjects regression on -rt kernels: don't fill the pool
(which uses a coarse lock) if ->pi_blocked_on, because that messes up
the priority inheritance of callers
* tag 'core-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Do not fill_pool() if pi_blocked_on
When the kernel is booted with a kunit filter (e.g.,
kunit.filter="speed!=slow"), the kunit executor dynamically allocates
copies of the filtered test suites using kmalloc/kmemdup.
During the initial boot execution, kunit_debugfs_create_suite() creates
debugfs files (such as /sys/kernel/debug/kunit/<suite>/run) and
permanently stores a pointer to the dynamically allocated suite in the
inode's i_private field.
Previously, the executor freed this dynamically allocated suite_set
immediately after executing the boot-time tests. Because the debugfs
nodes were not destroyed, any subsequent interaction with the debugfs
`run` file from userspace triggered a use-after-free (UAF). On systems
with architectural capabilities, like CHERI RISC-V, this resulted in
an immediate fatal hardware exception due to the invalidation of the
capability tags on the reclaimed memory. On other architectures, it
resulted in silent memory corruption.
Fix this UAF by properly coupling the lifetime of the filtered suite
memory allocation to the lifetime of the kunit subsystem and its
associated VFS nodes. Ownership of the boot-time suite_set is now
transferred to a global tracker ('kunit_boot_suites'), and the memory
is cleanly released in kunit_exit() during module teardown.
Link: https://lore.kernel.org/r/20260507084854.233984-1-florian.schmaus@codasip.com
Fixes: e2219db280 ("kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display")
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While auditing the Linux 7.0-rc2 kernel, I identified a potential security
vulnerability in the iov_iter framework's memory allocation logic.
The dup_iter() function, which is exported via EXPORT_SYMBOL, currently
uses kmemdup() with a raw multiplication to allocate the duplicate iovec array:
new->iov = kmemdup(from->iov, nr_segs * sizeof(struct iovec), gfp);
The hazard here is that dup_iter() relies on a primitive multiplication without
any integrated overflow check. Since nr_segs is often derived from user-space
input, this line is vulnerable to integer overflow (on 32-bit systems or
via type narrowing), potentially leading to a small allocation followed by a
large out-of-bounds memory copy. Furthermore, it allows for unbounded memory
allocations, as the function lacks intrinsic knowledge of safe limits.
On the 7.0-rc2 branch, several high-impact callchains still rely on this
exported function:
drivers/usb/gadget/function/f_fs.c:
The ffs_epfile_read_iter() path demonstrates why relying on dup_iter() is
dangerous: it performs allocation based on user input before verifying driver
state. This confirms that dup_iter() must be hardened internally as it cannot
assume pre-validated input.
drivers/usb/gadget/legacy/inode.c:
The ep_read_iter() path illustrates how dup_iter()’s lack of boundary awareness
compounds resource risks. When combined with other allocations, it creates
a multiplier effect for kernel memory pressure.
This patch replaces kmemdup() with kmemdup_array(), which utilizes
check_mul_overflow() to ensure the allocation size is calculated safely,
hardening dup_iter() against malicious or malformed inputs from its callers
Signed-off-by: Wang Haoran <haoranwangsec@gmail.com>
Link: https://patch.msgid.link/20260413060655.1139141-1-haoranwangsec@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull misc fixes from Andrew Morton:
"14 hotfixes. 9 are for MM. 10 are cc:stable and the remainder are for
post-7.1 issues or aren't deemed suitable for backporting.
There's a two-patch MAINTAINERS series from Mike Rapoport which
updates us for the new KEXEC/KDUMP/crash/LUO/etc arrangements. And
another two-patch series from Muchun Song to fix a couple of
memory-hotplug issues. Otherwise singletons, please see the changelogs
for details"
* tag 'mm-hotfixes-stable-2026-05-18-21-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory: fix spurious warning when unmapping device-private/exclusive pages
mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special()
drivers/base/memory: fix memory block reference leak in poison accounting
mm/memory_hotplug: fix memory block reference leak on remove
lib: kunit_iov_iter: fix test fail on powerpc
mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free
MAINTAINERS: add kexec@ list to LIVE UPDATE ENTRY
MAINTAINERS: add tree for KDUMP and KEXEC
selftests/mm: run_vmtests.sh: fix destructive tests invocation
scripts/gdb: slab: update field names of struct kmem_cache
scripts/gdb: mm: cast untyped symbols in x86_page_ops
mm/damon: fix damos_stat tracepoint format for sz_applied
mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break()
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
Pull timer fix from Ingo Molnar:
- Fix potential garbage reads in the vDSO gettimeofday code
(Thomas Weißschuh)
* tag 'timers-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Reload sequence counter after switch to time page in do_aux()
Pull crypto fixes from Herbert Xu:
- Fix potential dead-lock in rhashtable when used by xattr
- Avoid calling kvfree on atomic path in rhashtable
* tag 'v7.1-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
rhashtable: Add bucket_table_free_atomic() helper
mm/slab: Add kvfree_atomic() helper
rhashtable: drop ht->mutex in rhashtable_free_and_destroy()
After switching to the real data pages, the sequence counter needs to be
reloaded from there. The code using vdso_read_begin_timens() assumed
this worked by 'continue' jumping to the *beginning* of the do-while
retry loop. However the 'continue' jumps to the *end* of said loop,
evaluating the exit condition. If the data page has a sequence counter
of '1' it will match the one from the time namespace page and prematurely
exit the retry loop. This would result in garbage returned to the caller.
Reload the sequence counter after switching the pages by using an inner
while loop again, which will loop at most once.
The loop generates slightly better code than an explicit reload through
'seq = vdso_read_begin()'.
Fixes: ed78b7b2c5 ("vdso/gettimeofday: Add a helper to read the sequence lock of a time namespace aware clock")
Reported-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/20260422-vdso-aux-timens-loop-v1-1-e2dd8c7164cc@linutronix.de
Closes: https://lore.kernel.org/lkml/CANiDSCsOy0P1if-gJZqOM5pTJ0RDcwVfru1B7KFbTOEMqjPKJw@mail.gmail.com/
Pull probes fixes from Masami Hiramatsu:
- kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist()
Since the ftrace adds its NOPs at .kprobes.text section (which stores
an array), a wrong entry is added when loading a module which uses
"__kprobes" attribute.
To solve this, add "notrace" to __kprobes functions
- test_kprobes: clear kprobes between test runs
Clear all kprobes in the test program after running a test set,
because Kunit test can run several times
- fprobe: Fix unregister_fprobe() to wait for RCU grace period
Since the fprobe data structure is removed with hlist_del_rcu(), it
should wait for the RCU grace period. If the caller waits for RCU, we
can use the async variant (e.g. eBPF)
* tag 'probes-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
test_kprobes: clear kprobes between test runs
kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist()
syzbot reported a possible circular locking dependency between
&ht->mutex and fs_reclaim:
CPU0 (kswapd0) CPU1 (kworker)
-------------- --------------
fs_reclaim ht->mutex
shmem_evict_inode rhashtable_rehash_alloc
simple_xattrs_free bucket_table_alloc(GFP_KERNEL)
rhashtable_free_and_destroy __kvmalloc_node
mutex_lock(&ht->mutex) might_alloc -> fs_reclaim
The two halves of the splat refer to two different events on
&ht->mutex.
The kswapd0 path is unambiguous: shmem_evict_inode at mm/shmem.c:1429
calls simple_xattrs_free(), which calls rhashtable_free_and_destroy()
on the per-inode simple_xattrs rhashtable being torn down with the
inode.
The previously-recorded ht->mutex -> fs_reclaim edge comes from
rht_deferred_worker -> rhashtable_rehash_alloc ->
bucket_table_alloc(GFP_KERNEL) -> __kvmalloc_node ->
might_alloc -> fs_reclaim. That stack stops at generic library code:
there is no subsystem-specific frame above rht_deferred_worker, so
the splat does not identify which rhashtable's worker recorded the
edge -- only that some rhashtable in the system did.
Whether or not that recording happened on the same simple_xattrs ht
that is now being destroyed, the predicted deadlock cannot occur:
rhashtable_free_and_destroy() does cancel_work_sync(&ht->run_work)
before taking ht->mutex, so the deferred worker cannot be running on
the instance being torn down. If the recording was on a different
rhashtable instance, the two ht->mutex acquisitions are on distinct
mutex objects and cannot deadlock either.
Lockdep flags a cycle regardless because mutex_init(&ht->mutex) lives
on a single source line in rhashtable_init_noprof(), so every
ht->mutex in the kernel shares one static lockdep class. Lockdep
matches by class, not by instance, and collapses all of these into
one node.
Lift the lockdep key out of rhashtable_init_noprof() and into the
caller. The user-visible rhashtable_init_noprof() /
rhltable_init_noprof() identifiers become macros that declare a
per-call-site static lock_class_key.
Link: https://patch.msgid.link/20260427-work-rhashtable-lockdep-v1-1-f69e8bd91cb2@kernel.org
Fixes: c6307674ed ("mm: kvmalloc: add non-blocking support for vmalloc")
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: syzbot+5af806780f38a5fe691f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/69e798fe.050a0220.24bfd3.0032.GAE@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull kunit fixes from Shuah Khan:
"Fix to decouple KUNIT_DEBUGFS and KUNIT_ALL_TESTS options and fix
KUNIT_DEBUGFS dependencies so it depends on DEBUG_FS without which it
will not be useful"
* tag 'linux_kselftest-kunit-fixes-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: config: KUNIT_DEBUGFS should depend on DEBUG_FS
kunit: config: Enable KUNIT_DEBUGFS by default
Running the kprobes sanity tests twice makes all tests fail and
eventually crashes the kernel.
[root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run
...
# Totals: pass:5 fail:0 skip:0 total:5
ok 1 kprobes_test
[root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run
...
# test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64
Expected 0 == register_kprobe(&kp), but
register_kprobe(&kp) == -22 (0xffffffffffffffea)
...
Unable to handle kernel paging request ...
The testsuite defines several kprobes and kretprobes as static variables
that are preserved across test runs.
After register_kprobe and unregister_kprobe, a kprobe contains some
leftover data that must be cleared before the kprobe can be registered
again. The tests are setting symbol_name to define the probe location.
Address and flags must be cleared.
The existing code clears some of the probes between subsequent tests, but
not between two test runs. The leftover data from a previous test run
makes the registrations fail in the next run.
Move the cleanups for all kprobes into kprobes_test_init, this function
is called before each single test (including the first test of a test
run).
Link: https://lore.kernel.org/all/20260507134615.1010905-1-martin@kaiser.cx/
Fixes: e44e81c5b9 ("kprobes: convert tests to kunit")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull fbdev fixes from Helge Deller:
"Four small patches for fbdev, of which two are important: One fixes
the bitmap font generation and the other prevents a possible
use-after-free in udlfb:
- Fix rotating fonts by 180 degrees (Thomas Zimmermann)
- Drop duplicate include of linux/module.h in fb_defio (Chen Ni)
- Add vm_ops in udlfb to prevent use-after-free (Rajat Gupta)
- ipu-v3: clean up kernel-doc warnings (Randy Dunlap)"
* tag 'fbdev-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free
lib/fonts: Fix bit position when rotating by 180 degrees
fbdev: defio: Remove duplicate include of linux/module.h
fbdev: ipu-v3: clean up kernel-doc warnings
rhashtable_insert_rehash() allocates a new bucket table
with GFP_ATOMIC, as it is called from an RCU read-side
critical section.
If rhashtable_rehash_attach() then fails, the new table
is freed via kvfree(). This is unsafe, since kvfree() may
fall back to vfree() for vmalloc-backed allocations, which
can sleep and trigger:
BUG: sleeping function called from invalid context
Add bucket_table_free_atomic(), which uses kvfree_atomic()
so the table can be freed safely from non-sleeping context.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rhashtable_free_and_destroy() is a single-shot teardown routine:
cancel_work_sync() has already quiesced the deferred rehash worker, and
the function's documented contract requires the caller to guarantee no
other concurrent access to the rhashtable. Under those conditions
ht->mutex is not protecting anything -- taking it is a leftover from
the original teardown path.
That leftover is actively harmful: it closes a circular lock-class
dependency with fs_reclaim. The deferred rehash worker takes ht->mutex
and then allocates GFP_KERNEL memory in bucket_table_alloc(),
establishing
&ht->mutex -> fs_reclaim
After commit b32c4a2136 ("xattr: add rhashtable-based simple_xattr
infrastructure") introduced simple_xattr_ht_free(), which calls
rhashtable_free_and_destroy(), the simple_xattrs teardown became
reachable from evict() under the dcache shrinker. The subsequent
per-subsystem adaptations made the reverse edge concrete in three
independent code paths:
* commit 52b364fed6 ("shmem: adapt to rhashtable-based simple_xattrs with lazy allocation")
* commit 5bd97f5c5f ("kernfs: adapt to rhashtable-based simple_xattrs with lazy allocation")
* commit 50704c391f ("pidfs: adapt to rhashtable-based simple_xattrs")
Any of the three closes the cycle
fs_reclaim -> &ht->mutex
which lockdep reports as follows. This particular splat was observed
organically on a workstation kernel built from vfs-7.1-rc1.xattr at
~35h uptime under normal mixed workload, with CONFIG_PROVE_LOCKING=y.
The path happens to go through kernfs:
WARNING: possible circular locking dependency detected
7.0.0-faeab166167f-with-fixes-v1+ #191 Tainted: G U
kswapd0/243 is trying to acquire lock:
ffff8882e475c0f8 (&ht->mutex){+.+.}-{4:4},
at: rhashtable_free_and_destroy+0x36/0x740
but task is already holding lock:
ffffffffa8ad1d00 (fs_reclaim){+.+.}-{0:0},
at: balance_pgdat+0x995/0x1600
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x506/0xbf0
lock_acquire.part.0+0xc7/0x280
fs_reclaim_acquire+0xd9/0x130
__kvmalloc_node_noprof+0xcd/0xb40
bucket_table_alloc.isra.0+0x5a/0x440
rhashtable_rehash_alloc+0x4e/0xd0
rht_deferred_worker+0x14b/0x440
process_one_work+0x8fd/0x16a0
worker_thread+0x601/0xff0
kthread+0x36b/0x470
ret_from_fork+0x5bf/0x910
ret_from_fork_asm+0x1a/0x30
-> #0 (&ht->mutex){+.+.}-{4:4}:
check_prev_add+0xdb/0xce0
validate_chain+0x554/0x780
__lock_acquire+0x506/0xbf0
lock_acquire.part.0+0xc7/0x280
__mutex_lock+0x1b2/0x2550
rhashtable_free_and_destroy+0x36/0x740
kernfs_put.part.0+0x119/0x570
evict+0x3b6/0x9c0
__dentry_kill+0x181/0x540
shrink_dentry_list+0x135/0x440
prune_dcache_sb+0xdb/0x150
super_cache_scan+0x2ff/0x520
do_shrink_slab+0x35a/0xee0
shrink_slab_memcg+0x457/0x950
shrink_slab+0x43b/0x550
shrink_one+0x31a/0x6f0
shrink_many+0x31e/0xc80
shrink_node+0xeb3/0x14a0
balance_pgdat+0x8ed/0x1600
kswapd+0x2f3/0x530
kthread+0x36b/0x470
ret_from_fork+0x5bf/0x910
ret_from_fork_asm+0x1a/0x30
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&ht->mutex);
lock(fs_reclaim);
lock(&ht->mutex);
Note that lockdep tracks lock classes, not instances: the two
&ht->mutex sites are on different rhashtable objects (the deferred
worker was triggered by some unrelated rhashtable growth), but because
rhashtable_init() uses a single static lockdep key for all rhashtables,
this is a real class-level cycle. Once reported, lockdep disables
itself for the remainder of the boot, masking any subsequent locking
bugs.
Drop the mutex. After cancel_work_sync() the rehash worker is quiesced
and, per this function's contract, no other concurrent access is
possible; the tables are therefore owned exclusively by this function
and can be walked without any lock held.
Switch the table walks from rht_dereference() (which requires
ht->mutex to be held under CONFIG_PROVE_RCU) to rcu_dereference_raw(),
which has no lockdep annotation. rht_ptr_exclusive() already uses
rcu_dereference_protected(p, 1) and needs no change.
This is the only place in lib/rhashtable.c where &ht->mutex is
acquired from a path reachable under fs_reclaim; the deferred worker
is the only other site and it is the forward edge. Removing the
acquisition here therefore eliminates the class cycle for all three
subsystems that use simple_xattrs, not just the one in the splat
above. No locking-semantics change is introduced for correct users;
incorrect users would already be racing with rehash worker completion
regardless of the mutex.
Synthetic reproduction of the splat within a few-minute window was
unsuccessful across several attempts (tmpfs and kernfs zombies via
cgroupfs with open-fd-through-rmdir, with and without swap, up to
~60k reclaim-path executions of simple_xattr_ht_free() in a single
run), consistent with the rare coincidence-of-edges profile of the
bug: the forward edge is already registered in /proc/lockdep on any
idle system via rht_deferred_worker, but the reverse edge requires
evict() to complete kernfs_put()'s final release inside the fs_reclaim
critical section, which in my attempts was ordered against rather than
interleaved with the worker.
Fixes: b32c4a2136 ("xattr: add rhashtable-based simple_xattr infrastructure")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The KUNIT_DEBUGFS option is currently enabled based on the value of
KUNIT_ALL_TESTS, but it really doesn't have anything to do with the set of
enabled tests, so just enable it by default anyway. In particular, this
shouldn't be only visible if KUNIT_ALL_TESTS is set, which is quite
confusing.
Link: https://lore.kernel.org/r/20260425034155.53913-1-david@davidgow.net
Fixes: beaed42c42 ("kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS")
Signed-off-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull MM fixes from Andrew Morton:
"20 hotfixes. All are for MM (and for MMish maintainers). 9 are
cc:stable and the remainder are for post-7.0 issues or aren't deemed
suitable for backporting.
There are two DAMON series from SeongJae Park which address races
which could lead to use-after-free errors, and avoid the possibility
of presenting stale parameter values to users"
* tag 'mm-hotfixes-stable-2026-04-30-15-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memcontrol: fix rcu unbalance in get_non_dying_memcg_end()
mm/userfaultfd: detect VMA type change after copy retry in mfill_copy_folio_retry()
MAINTAINERS: remove stale kdump project URL
mm/damon/stat: detect and use fresh enabled value
mm/damon/lru_sort: detect and use fresh enabled and kdamond_pid values
mm/damon/reclaim: detect and use fresh enabled and kdamond_pid values
selftests/mm: specify requirement for PROC_MEM_ALWAYS_FORCE=y
mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
MAINTAINERS: update Li Wang's email address
MAINTAINERS, mailmap: update email address for Qi Zheng
MAINTAINERS: update Liam's email address
mm/hugetlb_cma: round up per_node before logging it
MAINTAINERS: fix regex pattern in CORE MM category
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
mm: start background writeback based on per-wb threshold for strictlimit BDIs
kho: fix error handling in kho_add_subtree()
liveupdate: fix return value on session allocation failure
mailmap: update entry for Dan Carpenter
vmalloc: fix buffer overflow in vrealloc_node_align()
Pull sched_ext fixes from Tejun Heo:
"The merge window pulled in the cgroup sub-scheduler infrastructure,
and new AI reviews are accelerating bug reporting and fixing - hence
the larger than usual fixes batch:
- Use-after-frees during scheduler load/unload:
- The disable path could free the BPF scheduler while deferred
irq_work / kthread work was still in flight
- cgroup setter callbacks read the active scheduler outside the
rwsem that synchronizes against teardown
Fix both, and reuse the disable drain in the enable error paths so
the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock
Fix the affected callsites, including recursive parent-into-child
dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounce it through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy:
- helper kfuncs hard-coded the root instead of resolving the
caller's scheduler
- the enable error path tried to disable per-task state that had
never been initialized, and leaked cpus_read_lock on the way
out
- a sysfs object was leaked on every load/unload
- the dispatch fast-path used the root scheduler instead of the
task's
- a couple of CONFIG #ifdef guards were misclassified
- Verifier-time hardening: BPF programs of unrelated struct_ops types
(e.g. tcp_congestion_ops) could call sched_ext kfuncs - a semantic
bug and, once sub-sched was enabled, a KASAN out-of-bounds read.
Now rejected at load. Plus a few NULL and cross-task argument
checks on sched_ext kfuncs, and a selftest covering the new deny.
- rhashtable (Herbert): restore the insecure_elasticity toggle and
bounce the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Move to
per-instance cpumasks, plus a follow-up to skip tasks whose
recorded CPU is stale relative to the new owning runqueue.
- Smaller fixes:
- a dispatch queue's first-task tracking misbehaved when a parked
iterator cursor sat in the list
- the runqueue's next-class wasn't promoted on local-queue
enqueue, leaving an SCX task behind RT in edge cases
- the reference qmap scheduler stopped erroring on legitimate
cross-scheduler task-storage misses"
* tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (26 commits)
sched_ext: Fix scx_flush_disable_work() UAF race
sched_ext: Call wakeup_preempt() in local_dsq_post_enq()
sched_ext: Release cpus_read_lock on scx_link_sched() failure in root enable
sched_ext: Reject NULL-sch callers in scx_bpf_task_set_slice/dsq_vtime
sched_ext: Refuse cross-task select_cpu_from_kfunc calls
sched_ext: Align cgroup #ifdef guards with SUB_SCHED vs GROUP_SCHED
sched_ext: Make bypass LB cpumasks per-scheduler
sched_ext: Pass held rq to SCX_CALL_OP() for core_sched_before
sched_ext: Pass held rq to SCX_CALL_OP() for dump_cpu/dump_task
sched_ext: Save and restore scx_locked_rq across SCX_CALL_OP
sched_ext: Use dsq->first_task instead of list_empty() in dispatch_enqueue() FIFO-tail
sched_ext: Resolve caller's scheduler in scx_bpf_destroy_dsq() / scx_bpf_dsq_nr_queued()
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
sched_ext: Don't disable tasks in scx_sub_enable_workfn() abort path
sched_ext: Skip tasks with stale task_rq in bypass_lb_cpu()
sched_ext: Guard scx_dsq_move() against NULL kit->dsq after failed iter_new
sched_ext: Unregister sub_kset on scheduler disable
sched_ext: Defer scx_hardlockup() out of NMI
sched_ext: sync disable_irq_work in bpf_scx_unreg()
sched_ext: Fix local_dsq_post_enq() to use task's scheduler in sub-sched
...
Fix the horizontal bit position when rotating a glyph by 180°. The
original code in rotate_ud() rounded the value in width up to a
multiple of 8, aka the bit pitch, and calculated the rotated pixel
from that value. The new code stores the glyph's pitch in bit_pitch,
but fails to update the rotated pixel's output accordingly. Simply
replacing the variable does this.
The bug can be reproduced by setting a font with an unaligned width,
such as sun12x22, like this:
setfont sun12x22
echo 2 > /sys/class/graphics/fbcon/rotate
Without the fix, the font looks distorted.
Fixes: a30e9e6b01 ("lib/fonts: Refactor glyph-rotation helpers")
Closes: https://lore.gitlab.freedesktop.org/drm-ai-reviews/review-patch7-20260407092555.58816-8-tzimmermann@suse.de/
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull RISC-V updates from Paul Walmsley:
"There is one significant change outside arch/riscv in this pull
request: the addition of a set of KUnit tests for strlen(), strnlen(),
and strrchr().
Otherwise, the most notable changes are to add some RISC-V-specific
string function implementations, to remove XIP kernel support, to add
hardware error exception handling, and to optimize our runtime
unaligned access speed testing.
A few comments on the motivation for removing XIP support. It's been
broken in the RISC-V kernel for months. The code is not easy to
maintain. Furthermore, for XIP support to truly be useful for RISC-V,
we think that compile-time feature switches would need to be added for
many of the RISC-V ISA features and microarchitectural properties that
are currently implemented with runtime patching. No one has stepped
forward to take responsibility for that work, so many of us think it's
best to remove it until clear use cases and champions emerge.
Summary:
- Add Kunit correctness testing and microbenchmarks for strlen(),
strnlen(), and strrchr()
- Add RISC-V-specific strnlen(), strchr(), strrchr() implementations
- Add hardware error exception handling
- Clean up and optimize our unaligned access probe code
- Enable HAVE_IOREMAP_PROT to be able to use generic_access_phys()
- Remove XIP kernel support
- Warn when addresses outside the vmemmap range are passed to
vmemmap_populate()
- Update the ACPI FADT revision check to warn if it's not at least
ACPI v6.6, which is when key RISC-V-specific tables were added to
the specification
- Increase COMMAND_LINE_SIZE to 2048 to match ARM64, x86, PowerPC,
etc.
- Make kaslr_offset() a static inline function, since there's no need
for it to show up in the symbol table
- Add KASLR offset and SATP to the VMCOREINFO ELF notes to improve
kdump support
- Add Makefile cleanup rule for vdso_cfi copied source files, and add
a .gitignore for the build artifacts in that directory
- Remove some redundant ifdefs that check Kconfig macros
- Add missing SPDX license tag to the CFI selftest
- Simplify UTS_MACHINE assignment in the RISC-V Makefile
- Clarify some unclear comments and remove some superfluous comments
- Fix various English typos across the RISC-V codebase"
* tag 'riscv-for-linus-7.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
riscv: Remove support for XIP kernel
riscv: Reuse compare_unaligned_access() in check_vector_unaligned_access()
riscv: Split out compare_unaligned_access()
riscv: Reuse measure_cycles() in check_vector_unaligned_access()
riscv: Split out measure_cycles() for reuse
riscv: Clean up & optimize unaligned scalar access probe
riscv: lib: add strrchr() implementation
riscv: lib: add strchr() implementation
riscv: lib: add strnlen() implementation
lib/string_kunit: extend benchmarks to strnlen() and chr searches
lib/string_kunit: add performance benchmark for strlen()
lib/string_kunit: add correctness test for strrchr()
lib/string_kunit: add correctness test for strnlen()
lib/string_kunit: add correctness test for strlen()
riscv: vdso_cfi: Add .gitignore for build artifacts
riscv: vdso_cfi: Add clean rule for copied sources
riscv: enable HAVE_IOREMAP_PROT
riscv: mm: WARN_ON() for bad addresses in vmemmap_populate()
riscv: acpi: update FADT revision check to 6.6
riscv: add hardware error trap handler support
...
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pull more crypto library updates from Eric Biggers:
"Crypto library fix and documentation update:
- Fix an integer underflow in the mpi library
- Improve the crypto library documentation"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: docs: Add rst documentation to Documentation/crypto/
docs: kdoc: Expand 'at_least' when creating parameter list
lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()
Inserts past 75% load call schedule_work(&ht->run_work) to kick an
async resize. If a caller holds a raw spinlock (e.g. an
insecure_elasticity user), schedule_work() under that lock records
caller_lock -> pool->lock -> pi_lock -> rq->__lock
A cycle forms if any of these locks is acquired in the reverse
direction elsewhere. sched_ext, the only current insecure_elasticity
user, hits this: it holds scx_sched_lock across rhashtable inserts of
sub-schedulers, while scx_bypass() takes rq->__lock -> scx_sched_lock.
Exercising the resize path produces:
Chain exists of:
&pool->lock --> &rq->__lock --> scx_sched_lock
Bounce the kick from the insert paths through irq_work so
schedule_work() runs from hard IRQ context with the caller's lock no
longer held. rht_deferred_worker()'s self-rearm on error stays on
schedule_work(&ht->run_work) - the worker runs in process context with
no caller lock held, and keeping the self-requeue on @run_work lets
cancel_work_sync() in rhashtable_free_and_destroy() drain it.
v3: Keep rht_deferred_worker()'s self-rearm on schedule_work(&run_work).
Routing it through irq_work in v2 broke cancel_work_sync()'s
self-requeue handling - an irq_work queued after irq_work_sync()
returned but while cancel_work_sync() was still waiting could fire
post-teardown.
v2: Bounce unconditionally instead of gating on insecure_elasticity,
as suggested by Herbert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull printk updates from Petr Mladek:
- Fix printk ring buffer initialization and sanity checks
- Workaround printf kunit test compilation with gcc < 12.1
- Add IPv6 address printf format tests
- Misc code and documentation cleanup
* tag 'printk-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printf: Compile the kunit test with DISABLE_BRANCH_PROFILING DISABLE_BRANCH_PROFILING
lib/vsprintf: use bool for local decode variable
lib/hexdump: print_hex_dump_bytes() calls print_hex_dump_debug()
printk: ringbuffer: fix errors in comments
printk_ringbuffer: Add sanity check for 0-size data
printk_ringbuffer: Fix get_data() size sanity check
printf: add IPv6 address format tests
printk: Fix _DESCS_COUNT type for 64-bit systems
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Some users of rhashtable cannot handle insertion failures, and
are happy to accept the consequences of a hash table that having
very long chains.
Restore the insecure_elasticity toggle for these users. In
addition to disabling the chain length checks, this also removes
the emergency resize that would otherwise occur when the hash
table occupancy hits 100% (an async resize is still scheduled
at 75%).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull more MM updates from Andrew Morton:
- "Eliminate Dying Memory Cgroup" (Qi Zheng and Muchun Song)
Address the longstanding "dying memcg problem". A situation wherein a
no-longer-used memory control group will hang around for an extended
period pointlessly consuming memory
- "fix unexpected type conversions and potential overflows" (Qi Zheng)
Fix a couple of potential 32-bit/64-bit issues which were identified
during review of the "Eliminate Dying Memory Cgroup" series
- "kho: history: track previous kernel version and kexec boot count"
(Breno Leitao)
Use Kexec Handover (KHO) to pass the previous kernel's version string
and the number of kexec reboots since the last cold boot to the next
kernel, and print it at boot time
- "liveupdate: prevent double preservation" (Pasha Tatashin)
Teach LUO to avoid managing the same file across different active
sessions
- "liveupdate: Fix module unloading and unregister API" (Pasha
Tatashin)
Address an issue with how LUO handles module reference counting and
unregistration during module unloading
- "zswap pool per-CPU acomp_ctx simplifications" (Kanchana Sridhar)
Simplify and clean up the zswap crypto compression handling and
improve the lifecycle management of zswap pool's per-CPU acomp_ctx
resources
- "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race"
(SeongJae Park)
Address unlikely but possible leaks and deadlocks in damon_call() and
damon_walk()
- "mm/damon/core: validate damos_quota_goal->nid" (SeongJae Park)
Fix a couple of root-only wild pointer dereferences
- "Docs/admin-guide/mm/damon: warn commit_inputs vs other params race"
(SeongJae Park)
Update the DAMON documentation to warn operators about potential
races which can occur if the commit_inputs parameter is altered at
the wrong time
- "Minor hmm_test fixes and cleanups" (Alistair Popple)
Bugfixes and a cleanup for the HMM kernel selftests
- "Modify memfd_luo code" (Chenghao Duan)
Cleanups, simplifications and speedups to the memfd_lou code
- "mm, kvm: allow uffd support in guest_memfd" (Mike Rapoport)
Support for userfaultfd in guest_memfd
- "selftests/mm: skip several tests when thp is not available" (Chunyu
Hu)
Fix several issues in the selftests code which were causing breakage
when the tests were run on CONFIG_THP=n kernels
- "mm/mprotect: micro-optimization work" (Pedro Falcato)
A couple of nice speedups for mprotect()
- "MAINTAINERS: update KHO and LIVE UPDATE entries" (Pratyush Yadav)
Document upcoming changes in the maintenance of KHO, LUO, memfd_luo,
kexec, crash, kdump and probably other kexec-based things - they are
being moved out of mm.git and into a new git tree
* tag 'mm-stable-2026-04-18-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (121 commits)
MAINTAINERS: add page cache reviewer
mm/vmscan: avoid false-positive -Wuninitialized warning
MAINTAINERS: update Dave's kdump reviewer email address
MAINTAINERS: drop include/linux/liveupdate from LIVE UPDATE
MAINTAINERS: drop include/linux/kho/abi/ from KHO
MAINTAINERS: update KHO and LIVE UPDATE maintainers
MAINTAINERS: update kexec/kdump maintainers entries
mm/migrate_device: remove dead migration entry check in migrate_vma_collect_huge_pmd()
selftests: mm: skip charge_reserved_hugetlb without killall
userfaultfd: allow registration of ranges below mmap_min_addr
mm/vmstat: fix vmstat_shepherd double-scheduling vmstat_update
mm/hugetlb: fix early boot crash on parameters without '=' separator
zram: reject unrecognized type= values in recompress_store()
docs: proc: document ProtectionKey in smaps
mm/mprotect: special-case small folios when applying permissions
mm/mprotect: move softleaf code out of the main function
mm: remove '!root_reclaim' checking in should_abort_scan()
mm/sparse: fix comment for section map alignment
mm/page_io: use sio->len for PSWPIN accounting in sio_read_complete()
selftests/mm: transhuge_stress: skip the test when thp not available
...
Pull memblock updates from Mike Rapoport:
- improve debuggability of reserve_mem kernel parameter handling with
print outs in case of a failure and debugfs info showing what was
actually reserved
- Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/alternative: delay freeing of smp_locks section
memblock: warn when freeing reserved memory before memory map is initialized
memblock, treewide: make memblock_free() handle late freeing
memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
memblock: extract page freeing from free_reserved_area() into a helper
memblock: make free_reserved_area() more robust
mm: move free_reserved_area() to mm/memblock.c
powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
memblock: move reserve_bootmem_range() to memblock.c and make it static
memblock: Add reserve_mem debugfs info
memblock: Print out errors on reserve_mem parser
kho_add_subtree() accepts a size parameter but only forwards it to
debugfs. The size is not persisted in the KHO FDT, so it is lost across
kexec. This makes it impossible for the incoming kernel to determine the
blob size without understanding the blob format.
Store the blob size as a "blob-size" property in the KHO FDT alongside the
"preserved-data" physical address. This allows the receiving kernel to
recover the size for any blob regardless of format.
Also extend kho_retrieve_subtree() with an optional size output parameter
so callers can learn the blob size without needing to understand the blob
format. Update all callers to pass NULL for the new parameter.
Link: https://lore.kernel.org/20260316-kho-v9-3-ed6dcd951988@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kho: history: track previous kernel version and kexec boot
count", v9.
Use Kexec Handover (KHO) to pass the previous kernel's version string and
the number of kexec reboots since the last cold boot to the next kernel,
and print it at boot time.
Example
=======
[ 0.000000] Linux version 6.19.0-rc3-upstream-00047-ge5d992347849
...
[ 0.000000] KHO: exec from: 6.19.0-rc4-next-20260107upstream-00004-g3071b0dc4498 (count 1)
Motivation
==========
Bugs that only reproduce when kexecing from specific kernel versions are
difficult to diagnose. These issues occur when a buggy kernel kexecs into
a new kernel, with the bug manifesting only in the second kernel.
Recent examples include:
* eb22663125 ("x86/boot: Fix page table access in 5-level to 4-level paging transition")
* 77d48d39e9 ("efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption")
* 64b45dd46e ("x86/efi: skip memattr table on kexec boot")
As kexec-based reboots become more common, these version-dependent bugs
are appearing more frequently. At scale, correlating crashes to the
previous kernel version is challenging, especially when issues only occur
in specific transition scenarios.
Some bugs manifest only after multiple consecutive kexec reboots.
Tracking the kexec count helps identify these cases (this metric is
already used by live update sub-system).
KHO provides a reliable mechanism to pass information between kernels. By
carrying the previous kernel's release string and kexec count forward, we
can print this context at boot time to aid debugging.
The goal of this feature is to have this information being printed in
early boot, so, users can trace back kernel releases in kexec. Systemd is
not helpful because we cannot assume that the previous kernel has systemd
or even write access to the disk (common when using Linux as bootloaders)
This patch (of 6):
kho_add_subtree() assumes the fdt argument is always an FDT and calls
fdt_totalsize() on it in the debugfs code path. This assumption will
break if a caller passes arbitrary data instead of an FDT.
When CONFIG_KEXEC_HANDOVER_DEBUGFS is enabled, kho_debugfs_fdt_add() calls
__kho_debugfs_fdt_add(), which executes:
f->wrapper.size = fdt_totalsize(fdt);
Fix this by adding an explicit size parameter to kho_add_subtree() so
callers specify the blob size. This allows subtrees to contain arbitrary
data formats, not just FDTs. Update all callers:
- memblock.c: use fdt_totalsize(fdt)
- luo_core.c: use fdt_totalsize(fdt_out)
- test_kho.c: use fdt_totalsize()
- kexec_handover.c (root fdt): use fdt_totalsize(kho_out.fdt)
Also update __kho_debugfs_fdt_add() to receive the size explicitly instead
of computing it internally via fdt_totalsize(). In kho_in_debugfs_init(),
pass fdt_totalsize() for the root FDT and sub-blobs since all current
users are FDTs. A subsequent patch will persist the size in the KHO FDT
so the incoming side can handle non-FDT blobs correctly.
Link: https://lore.kernel.org/20260323110747.193569-1-duanchenghao@kylinos.cn
Link: https://lore.kernel.org/20260316-kho-v9-1-ed6dcd951988@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
