Pull clk updates from Stephen Boyd:
"This is all clk driver updates. Mostly new SoC support for various
Qualcomm chips and Canaan K230. Otherwise there's non-critical fixes
and updates to clk data such as adding missing clks to existing
drivers or marking clks critical. Nothing looks especially exciting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (106 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
clk: at91: keep securam node alive while mapping it
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: renesas: r9a08g045: Drop unused pm_domain header file
...
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
Use nMUX() for USI and UART user muxes to allow reparenting between
OSC and CMU IP output when changing rates, and use DIV_F() with
CLK_SET_RATE_PARENT on their dividers and gates so rate requests
propagate upward.
Consolidate identical USI parent arrays into shared
mout_peric0_nonbususer_p and mout_peric1_nonbususer_p.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
Link: https://patch.msgid.link/20260528-perics-usi-v1-1-13a6ee4d1a6f@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sashiko reported an inconsistent use of NULL vs ERR_PTR()
returns in the stub helpers in xynos-acpm-protocol.h.
Since this only happens on dead code for COMPILE_TEST=y, this is not
really a bug though. Having stub functions that return NULL is a common
way to define optional interfaces, where callers still work when the
feature is disabled, though this clearly does not work for acpm because
some callers have a NULL pointer dereference when compile testing.
Since CONFIG_EXYNOS_ACPM_PROTOCOL already supports compile-testing itself,
and all (both) drivers using it clearly require the support, so this
just simplifies the option space without losing any build coverage.
Remove the stub functions entirely and adjust the one Kconfig
dependency to require EXYNOS_ACPM_PROTOCOL unconditionally.
Fixes: 6837c006d4 ("firmware: exynos-acpm: add empty method to allow compile test")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org
Link: https://lore.kernel.org/all/a7994860-24a3-4f87-84bf-109ed653dda4@linaro.org/
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260529134454.2147446-1-arnd@kernel.org
[krzk: Rebase on difference in devm_acpm_get_by_node()]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Replace the embedded `struct acpm_ops` inside `struct acpm_handle` with
a pointer to a `const struct acpm_ops`.
Previously, the operations structure was embedded directly within the
handle and populated dynamically at runtime via `acpm_setup_ops()`.
This resulted in mutable function pointers and unnecessary per-instance
memory overhead.
By defining `exynos_acpm_driver_ops` statically as a `const` structure,
the function pointers are now safely housed in the read-only `.rodata`
section. This improves security by preventing function pointer
overwrites, saves memory, and slightly reduces initialization overhead
in `acpm_probe()`.
Consequently, update all consumer drivers (clk, mfd) to access the
operations via the new pointer indirection (`->ops->`). Finally, fix
the previously empty kernel-doc description for the ops member to
reflect its new pointer nature.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-4-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In the peric0_clk_regs array, the divider register offset for USI6 was
accidentally listed twice, while the divider for USI7 was omitted.
Missing this DIV register causes the USI7 clock divider setting to be
lost and reset to its hardware default value during a suspend/resume
cycle.
Replace the duplicated USI6 DIV entry with the correct USI7 DIV
register.
Fixes: 893f133a04 ("clk: samsung: gs101: add support for cmu_peric0")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505171457.1960837-1-visitorckw@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Exynos850 APM co-processor relies on the I3C bus to communicate with
the PMIC. Currently, there is no dedicated PMIC consumer driver managing
these clocks, so the clock subsystem automatically gates them during the
initialisation. Once gated, any subsequent ACPM communication with APM
results in timeouts.
As a temporary workaround (and let's hope it doesn't become permanent),
mark both `gout_i3c_pclk` and `gout_i3c_sclk` as CLK_IS_CRITICAL ones to
prevent the clock subsystem from disabling them. This makes the ACPM
communication functional. This workaround should be reverted once a
proper ACPM PMIC driver is implemented to manage these clocks.
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260430-exynos850-i3c-criticalclocks-v1-1-6e1fd8dfa21b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
All the functions operating on the 'handle' pointer are claiming it is a
pointer to const thus they should not modify the handle. In fact that's
a false statement, because first thing these functions do is drop the
cast to const with container_of:
struct acpm_info *acpm = handle_to_acpm_info(handle);
And with such cast the handle is easily writable with simple:
acpm->handle.ops.pmic_ops.read_reg = NULL;
The code is not correct logically, either, because functions like
acpm_get_by_node() and acpm_handle_put() are meant to modify the handle
reference counting, thus they must modify the handle. Modification here
happens anyway, even if the reference counting is stored in the
container which the handle is part of.
The code does not have actual visible bug, but incorrect 'const'
annotations could lead to incorrect compiler decisions.
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260224104203.42950-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add below clock PLL support for Axis ARTPEC-9 SoC platform:
- pll_a9fracm: Integer PLL with mid frequency FVCO (800 to 6400 MHz)
This is used in ARTPEC-9 SoC for shared PLL
- pll_a9fraco: Integer/Fractional PLL with mid frequency FVCO
(600 to 2400 MHz)
This is used in ARTPEC-9 SoC for Audio PLL
FOUT calculation for pll_a9fracm and pll_a9fraco:
FOUT = (MDIV x FIN)/(PDIV x (SDIV + 1)) for integer PLL
FOUT = (((MDIV + (KDIV/2^24)) x FIN)/(PDIV x (SDIV + 1)) for fractional PLL
Signed-off-by: GyoungBo Min <mingyoungbo@coasia.com>
Reviewed-by: Kyunghwan Kim <kenkim@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Link: https://patch.msgid.link/20251029130731.51305-3-ravi.patel@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Currently, sysreg registers of a CMU that has PM and automatic clock
gating enabled are not saved / restored during runtime PM (RPM) or
s2idle. During normal suspend, they are accessed too late, after the
CMU (and potentially power domain) have been shut down, causing an
SError.
The reason is that these registers are registered to be saved/restored
via a syscore suspend handler which doesn't run during RPM or s2idle.
During normal suspend, this handler runs after the CMU has been shut
down. This registration happens as part of
samsung_clk_extended_sleep_init() via samsung_en_dyn_root_clk_gating().
When PM is enabled for a CMU, registers must be saved/restored via
exynos_arm64_cmu_suspend() / exynos_arm64_cmu_resume() respectively
instead. These use their own data structures and are unrelated to
anything that samsung_clk_extended_sleep_init() does. Calling it
unconditionally from samsung_en_dyn_root_clk_gating() therefore isn't
useful.
Update the code to prepare sysreg save / restore in a similar way to
how it handles other clock registers in the PM case already.
exynos_arm64_cmu_suspend() / exynos_arm64_cmu_resume() already handle
sysreg save/restore, just the setup was incorrect.
Fixes: 298fac4f4b ("clk: samsung: Implement automatic clock gating mode for CMUs")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260109-clk-samsung-autoclk-updates-v1-2-2394dcf242a9@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Update exynos_arm64_init_clocks() so that it enables the automatic clock
mode bits in the CMU option register if the auto_clock_gate flag and
option_offset fields are set for the CMU. To ensure compatibility with
older DTs (that specified an incorrect CMU reg size), detect this and
fallback to manual clock gate mode as the auto clock mode feature depends
on registers in this area.
The CMU option register bits are global and effect every clock component in
the CMU, as such clearing the GATE_ENABLE_HWACG bit and setting GATE_MANUAL
bit on every gate register is only required if auto_clock_gate is false.
Additionally if auto_clock_gate is enabled the dynamic root clock gating
and memclk registers will be configured in the corresponding CMUs sysreg
bank. These registers are exposed via syscon, so the register
samsung_clk_save/restore paths are updated to also take a regmap.
As many gates for various Samsung SoCs are already exposed in the Samsung
clock drivers a new samsung_auto_clk_gate_ops is implemented. This uses
some CMU debug registers to report whether clocks are enabled or disabled
when operating in automatic mode. This allows
/sys/kernel/debug/clk/clk_summary to still dump the entire clock tree and
correctly report the status of each clock in the system.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20251222-automatic-clocks-v7-3-fec86fa89874@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Reported-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Closes: https://lore.kernel.org/aSIYDN5eyKFKoXKL@eldamar.lan/
Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
readl_relaxed_poll_timeout_atomic() has been updated in 2023 in
commit 7349a69cf3 ("iopoll: Do not use timekeeping in
read_poll_timeout_atomic()") to avoid usage of timekeeping APIs. It
also never used udelay() when no delay was given.
With the implementation avoiding timekeeping APIs, and with a caller
not passing a delay, the timeout argument simply becomes a loop
counter.
Therefore the code here can be simplified to unconditionally use
readl_relaxed_poll_timeout_atomic(). The difference being the last
argument, the timeout (loop counter). Simply adjust it to pass the
more generous counter in all cases.
This change also allows us to drop all code around the
pll_early_timeout variable as it is unused now.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251013-samsung-clk-pll-simplification-v2-1-b9aab610878c@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support for CMU_MFC which provides clocks to MFC block, and
register the required compatible and cmu_info for the same.
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support for CMU_M2M which provides clocks to M2M block, and
register the required compatible and cmu_info for the same.
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add clock controller support for Peripheral Connectivity 0 and 1 blocks.
These provide clocks for USI, I2C and UART peripherals.
Some clocks need to be marked as critical to prevent system hang when
disabled.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add below clock PLL support for Axis ARTPEC-8 SoC platform:
- pll_1017x: Integer PLL with mid frequency FVCO (950 to 2400 MHz)
This is used in ARTPEC-8 SoC for shared PLL
- pll_1031x: Integer/Fractional PLL with mid frequency FVCO
(600 to 1200 MHz)
This is used in ARTPEC-8 SoC for Audio PLL
FOUT calculation for pll_1017x and pll_1031x:
FOUT = (MDIV x FIN)/(PDIV x 2^SDIV) for integer PLL
FOUT = (((MDIV + KDIV)/65536) x FIN)/(PDIV x 2^SDIV) for fractional PLL
Signed-off-by: Hakyeong Kim <hgkim05@coasia.com>
Signed-off-by: SeonGu Kang <ksk4725@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Link: https://lore.kernel.org/r/20250825114436.46882-3-ravi.patel@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
