mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-02-16 05:37:45 -05:00
17a42aa465c000fccdcf581950d2c6f4e0c343ca
11872 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Yael Chemla
|
491c5dc98b |
net: ethtool: Add support for 1600Gbps speed
Add support for 1600Gbps link modes based on 200Gbps per lane [1]. This includes the adopted IEEE 802.3dj copper and optical PMDs that use 200G/lane signaling [2]. Add the following PMD types: - KR8 (backplane) - CR8 (copper cable) - DR8 (SMF 500m) - DR8-2 (SMF 2km) These modes are defined in the 802.3dj specifications. References: [1] https://www.ieee802.org/3/dj/public/23_03/opsasnick_3dj_01a_2303.pdf [2] https://www.ieee802.org/3/dj/projdoc/objectives_P802d3dj_240314.pdf Signed-off-by: Yael Chemla <ychemla@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/1763585297-1243980-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
9e203721ec |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.18-rc7). No conflicts, adjacent changes: tools/testing/selftests/net/af_unix/Makefile |
||
|
Linus Torvalds
|
23cb64fb76 |
Merge tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann: "These are mainly devicetree fixes for the arm platforms from Rockchips NXP, ASpeed and Broadcom, addressing issues with accidental overclocking, pinctrl, network and dtc warnings. There are additional fixes for regressions with the i.MX reset and memory controller drivers as well as the Tegra memory controller driver. Minor updates to the MAINTAINERS file, tee documentation and defconfigs bring those up to date with recent changes elsewhere" * tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) MAINTAINERS: sync omap devicetree maintainers with omap platform MAINTAINERS: Update Krzysztof Kozlowski's email arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5 arm64: dts: rockchip: disable HS400 on RK3588 Tiger arm64: dts: rockchip: drop reset from rk3576 i2c9 node tee: <uapi/linux/tee.h: fix all kernel-doc issues arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2 arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias arm64: dts: broadcom: Assign clock rates in eth node for RPi5 reset: imx8mp-audiomix: Fix bad mask values ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY arm64: defconfig: Fix V3D deferred probe timeout arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2 arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1 arm64: dts: imx8mp-kontron: Fix USB OTG role switching arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred arm: imx_v6_v7_defconfig: enable ext4 directly memory: tegra210: Fix incorrect client ids arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso ... |
||
|
Linus Torvalds
|
e7c375b181 |
Merge tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner: - Fix unitialized variable in statmount_string() - Fix hostfs mounting when passing host root during boot - Fix dynamic lookup to fail on cell lookup failure - Fix missing file type when reading bfs inodes from disk - Enforce checking of sb_min_blocksize() calls and update all callers accordingly - Restore write access before closing files opened by open_exec() in binfmt_misc - Always freeze efivarfs during suspend/hibernate cycles - Fix statmount()'s and listmount()'s grab_requested_mnt_ns() helper to actually allow mount namespace file descriptor in addition to mount namespace ids - Fix tmpfs remount when noswap is specified - Switch Landlock to iput_not_last() to remove false-positives from might_sleep() annotations in iput() - Remove dead node_to_mnt_ns() code - Ensure that per-queue kobjects are successfully created * tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: landlock: fix splats from iput() after it started calling might_sleep() fs: add iput_not_last() shmem: fix tmpfs reconfiguration (remount) when noswap is set fs/namespace: correctly handle errors returned by grab_requested_mnt_ns power: always freeze efivarfs binfmt_misc: restore write access before closing files opened by open_exec() block: add __must_check attribute to sb_min_blocksize() virtio-fs: fix incorrect check for fsvq->kobj xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super isofs: check the return value of sb_min_blocksize() in isofs_fill_super exfat: check return value of sb_min_blocksize in exfat_read_boot_sector vfat: fix missing sb_min_blocksize() return value checks mnt: Remove dead code which might prevent from building bfs: Reconstruct file type when loading from disk afs: Fix dynamic lookup to fail on cell lookup failure hostfs: Fix only passing host root in boot stage with new mount fs: Fix uninitialized 'offp' in statmount_string() |
||
|
Arnd Bergmann
|
124c98b100 |
Merge tag 'tee-fix-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
TEE kernel-doc fixes for v6.18 * tag 'tee-fix-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee: tee: <uapi/linux/tee.h: fix all kernel-doc issues Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
ac9f4f306d |
Merge tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe: - Use the actual segments in a request when for bvec based buffers - Fix an odd case where the iovec might get leaked for a read/write request, if it was newly allocated, overflowed the alloc cache, and hit an early error - Minor tweak to the query API added in this release, returning the number of available entries * tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs io_uring/query: return number of available queries io_uring/rw: ensure allocated iovec gets cleared for early failure |
||
|
Jakub Kicinski
|
c99ebb6132 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.18-rc6). No conflicts, adjacent changes in: drivers/net/phy/micrel.c |
||
|
Andrei Vagin
|
78f0e33cd6 |
fs/namespace: correctly handle errors returned by grab_requested_mnt_ns
grab_requested_mnt_ns was changed to return error codes on failure, but
its callers were not updated to check for error pointers, still checking
only for a NULL return value.
This commit updates the callers to use IS_ERR() or IS_ERR_OR_NULL() and
PTR_ERR() to correctly check for and propagate errors.
This also makes sure that the logic actually works and mount namespace
file descriptors can be used to refere to mounts.
Christian Brauner <brauner@kernel.org> says:
Rework the patch to be more ergonomic and in line with our overall error
handling patterns.
Fixes:
|
||
|
Saeed Mahameed
|
0e535824d0 |
devlink: Introduce switchdev_inactive eswitch mode
Adds DEVLINK_ESWITCH_MODE_SWITCHDEV_INACTIVE attribute to UAPI and documentation. Before having traffic flow through an eswitch, a user may want to have the ability to block traffic towards the FDB until FDB is fully programmed and the user is ready to send traffic to it. For example: when two eswitches are present for vports in a multi-PF setup, one eswitch may take over the traffic from the other when the user chooses. Before this take over, a user may want to first program the inactive eswitch and then once ready redirect traffic to this new eswitch. switchdev modes transition semantics: legacy->switchdev_inactive: Create switchdev mode normally, traffic not allowed to flow yet. switchdev_inactive->switchdev: Enable traffic to flow. switchdev->switchdev_inactive: Block traffic on the FDB, FDB and representros state and content is preserved. When eswitch is configured to this mode, traffic is ignored/dropped on this eswitch FDB, while current configuration is kept, e.g FDB rules and netdev representros are kept available, FDB programming is allowed. Example: # start inactive switchdev devlink dev eswitch set pci/0000:08:00.1 mode switchdev_inactive # setup TC rules, representors etc .. # activate devlink dev eswitch set pci/0000:08:00.1 mode switchdev Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20251108070404.1551708-2-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Pavel Begunkov
|
6a77267d97 |
io_uring/query: return number of available queries
It's useful to know which query opcodes are available. Extend the structure and return that. It's a trivial change, and even though it can be painlessly extended later, it'd still require adding a v2 of the structure. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Randy Dunlap
|
aaf46c6a6d |
tee: <uapi/linux/tee.h: fix all kernel-doc issues
Fix kernel-doc warnings so that there no other kernel-doc issues in <uapi/linux/tee.h>: - add ending ':' to some struct members as needed for kernel-doc - change struct name in kernel-doc to match the actual struct name (2x) - add a @params: kernel-doc entry multiple times Warning: tee.h:265 struct member 'ret_origin' not described in 'tee_ioctl_open_session_arg' Warning: tee.h:265 struct member 'num_params' not described in 'tee_ioctl_open_session_arg' Warning: tee.h:265 struct member 'params' not described in 'tee_ioctl_open_session_arg' Warning: tee.h:351 struct member 'num_params' not described in 'tee_iocl_supp_recv_arg' Warning: tee.h:351 struct member 'params' not described in 'tee_iocl_supp_recv_arg' Warning: tee.h:372 struct member 'num_params' not described in 'tee_iocl_supp_send_arg' Warning: tee.h:372 struct member 'params' not described in 'tee_iocl_supp_send_arg' Warning: tee.h:298: expecting prototype for struct tee_ioctl_invoke_func_arg. Prototype was for struct tee_ioctl_invoke_arg instead Warning: tee.h:473: expecting prototype for struct tee_ioctl_invoke_func_arg. Prototype was for struct tee_ioctl_object_invoke_arg instead Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> |
||
|
Jakub Kicinski
|
f05d26198c |
psp: add stats from psp spec to driver facing api
Provide a driver api for reporting device statistics required by the "Implementation Requirements" section of the PSP Architecture Specification. Use a warning to ensure drivers report stats required by the spec. Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20251106002608.1578518-4-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
dae4a92399 |
psp: report basic stats from the core
Track and report stats common to all psp devices from the core. A 'stale-event' is when the core marks the rx state of an active psp_assoc as incapable of authenticating psp encapsulated data. Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20251106002608.1578518-2-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
9dc520632a |
Merge tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe: - Remove the sync refill API that was added in this release, in anticipation of doing it in a better way for the next release - Fix type extension for calculating size off nr_pages, like we do in other spots * tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring: fix types for region size calulation io_uring/zcrx: remove sync refill uapi |
||
|
Daniel Golle
|
c6230446b1 |
net: dsa: add tagging driver for MaxLinear GSW1xx switch family
Add support for a new DSA tagging protocol driver for the MaxLinear GSW1xx switch family. The GSW1xx switches use a proprietary 8-byte special tag inserted between the source MAC address and the EtherType field to indicate the source and destination ports for frames traversing the CPU port. Implement the tag handling logic to insert the special tag on transmit and parse it on receive. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://patch.msgid.link/0e973ebfd9433c30c96f50670da9e9449a0d98f2.1762170107.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
1ec9871fbb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.18-rc5). Conflicts: drivers/net/wireless/ath/ath12k/mac.c |
||
|
Linus Torvalds
|
c2c2ccfd4b |
Merge tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
||
|
Linus Torvalds
|
5624d4c378 |
Merge tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New Hotkey Support:
- input + dell-wmi-base: Electronic privacy screen on/off hotkey
support
- int3472: Fix unregister double free
- wireless-hotkey: Fix Kconfig typo"
* tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: x86: Kconfig: fix minor typo in help for WIRELESS_HOTKEY
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Input: Add keycodes for electronic privacy screen on/off hotkeys
MAINTAINERS: Update int3472 maintainers
platform/x86: int3472: Fix double free of GPIO device during unregister
|
||
|
Matthieu Baerts (NGI0)
|
f88191c7f3 |
mptcp: pm: in-kernel: record fullmesh endp nb
Instead of iterating over all endpoints, under RCU read lock, just to check if one of them as the fullmesh flag, we can keep a counter of fullmesh endpoint, similar to what is done with the other flags. This counter is now checked, before iterating over all endpoints. Similar to the other counters, this new one is also exposed. A userspace app can then know when it is being used in a fullmesh mode, with potentially (too) many subflows. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-1-b4166772d6bb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Michael S. Tsirkin
|
c3838262b8 |
virtio_net: fix alignment for virtio_net_hdr_v1_hash
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes:
|
||
|
Oleksij Rempel
|
e6e93fb013 |
ethtool: netlink: add ETHTOOL_MSG_MSE_GET and wire up PHY MSE access
Introduce the userspace entry point for PHY MSE diagnostics via
ethtool netlink. This exposes the core API added previously and
returns both capability information and one or more snapshots.
Userspace sends ETHTOOL_MSG_MSE_GET. The reply carries:
- ETHTOOL_A_MSE_CAPABILITIES: scale limits and timing information
- ETHTOOL_A_MSE_CHANNEL_* nests: one or more snapshots (per-channel
if available, otherwise WORST, otherwise LINK)
Link down returns -ENETDOWN.
Changes:
- YAML: add attribute sets (mse, mse-capabilities, mse-snapshot)
and the mse-get operation
- UAPI (generated): add ETHTOOL_A_MSE_* enums and message IDs,
ETHTOOL_MSG_MSE_GET/REPLY
- ethtool core: add net/ethtool/mse.c implementing the request,
register genl op, and hook into ethnl dispatch
- docs: document MSE_GET in ethtool-netlink.rst
The include/uapi/linux/ethtool_netlink_generated.h is generated
from Documentation/netlink/specs/ethtool.yaml.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027122801.982364-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Samiullah Khawaja
|
c18d4b190a |
net: Extend NAPI threaded polling to allow kthread based busy polling
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to enable and disable threaded busy polling. When threaded busy polling is enabled for a NAPI, enable NAPI_STATE_THREADED also. When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to signal napi_complete_done not to rearm interrupts. Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread go to sleep. Signed-off-by: Samiullah Khawaja <skhawaja@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Martin Karsten <mkarsten@uwaterloo.ca> Tested-by: Martin Karsten <mkarsten@uwaterloo.ca> Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Pavel Begunkov
|
819630bd6f |
io_uring/zcrx: remove sync refill uapi
There is a better way to handle the problem IORING_REGISTER_ZCRX_REFILL solves. The uapi can also be slightly adjusted to accommodate future extensions. Remove the feature for now, it'll be reworked for the next release. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Ivan Vecera
|
30176bf7c8 |
dpll: add phase-adjust-gran pin attribute
Phase-adjust values are currently limited by a min-max range. Some hardware requires, for certain pin types, that values be multiples of a specific granularity, as in the zl3073x driver. Add a `phase-adjust-gran` pin attribute and an appropriate field in dpll_pin_properties. If set by the driver, use its value to validate user-provided phase-adjust values. Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Petr Oros <poros@redhat.com> Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
PIYUSH CHOUDHARY
|
18cd0a9c7a |
video: fb: Fix typo in comment in fb.h
Fix typo: "verical" -> "vertical" in macro description Signed-off-by: PIYUSH CHOUDHARY <mercmerc961@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org |
||
|
Hans de Goede
|
8f3eaad981 |
Input: Add keycodes for electronic privacy screen on/off hotkeys
Add keycodes for hotkeys toggling the electronic privacy screen found on some laptops on/off. There already is an API for eprivacy screens as kernel-mode-setting drm connector object properties: https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties this API also supports reporting when the eprivacy screen is turned on/off by the embedded-controller (EC) in response to hotkey presses. But on some laptops (e.g. the Dell Latitude 7300) the firmware does not allow querying the presence nor the status of the eprivacy screen at boot. This makes it impossible to implement the drm connector properties API since drm objects do not allow adding new properties after creation and the presence of the eprivacy cannot be detected at boot. The first notice of the presence of an eprivacy screen on these laptops is an EC generated (WMI) event when the eprivacy screen hotkeys are pressed. In this case the new keycodes this change adds can be generated to notify userspace of the eprivacy screen on/off hotkeys being pressed, so that userspace can show the usual on-screen-display (OSD) notification for eprivacy screen on/off to the user. This is similar to how e.g. touchpad on/off keycodes are used to show the touchpad on/off OSD. Signed-off-by: Hans de Goede <hansg@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://patch.msgid.link/20251020152331.52870-2-hansg@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Wilfred Mallawa
|
82cb5be6ad |
net/tls: support setting the maximum payload size
During a handshake, an endpoint may specify a maximum record size limit. Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the maximum record size. Meaning that, the outgoing records from the kernel can exceed a lower size negotiated during the handshake. In such a case, the TLS endpoint must send a fatal "record_overflow" alert [1], and thus the record is discarded. Upcoming Western Digital NVMe-TCP hardware controllers implement TLS support. For these devices, supporting TLS record size negotiation is necessary because the maximum TLS record size supported by the controller is less than the default 16KB currently used by the kernel. Currently, there is no way to inform the kernel of such a limit. This patch adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that allows for setting the maximum plaintext fragment size. Once set, outgoing records are no larger than the size specified. This option can be used to specify the record size limit. [1] https://www.rfc-editor.org/rfc/rfc8449 Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20251022001937.20155-1-wilfred.opensource@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
2b7553db91 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.18-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Yang
|
ca4709843b |
net: dsa: tag_yt921x: add support for Motorcomm YT921x tags
Add support for Motorcomm YT921x tags, which includes a proper configurable ethertype field (default to 0x9988). Signed-off-by: David Yang <mmyangfl@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251017060859.326450-3-mmyangfl@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Paolo Bonzini
|
4361f5aa8b |
Merge tag 'kvm-x86-fixes-6.18-rc2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit
|
||
|
Kuniyuki Iwashima
|
38163af068 |
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
If a socket has sk->sk_bypass_prot_mem flagged, the socket opts out
of the global protocol memory accounting.
This is easily controlled by net.core.bypass_prot_mem sysctl, but it
lacks flexibility.
Let's support flagging (and clearing) sk->sk_bypass_prot_mem via
bpf_setsockopt() at the BPF_CGROUP_INET_SOCK_CREATE hook.
int val = 1;
bpf_setsockopt(ctx, SOL_SOCKET, SK_BPF_BYPASS_PROT_MEM,
&val, sizeof(val));
As with net.core.bypass_prot_mem, this is inherited to child sockets,
and BPF always takes precedence over sysctl at socket(2) and accept(2).
SK_BPF_BYPASS_PROT_MEM is only supported at BPF_CGROUP_INET_SOCK_CREATE
and not supported on other hooks for some reasons:
1. UDP charges memory under sk->sk_receive_queue.lock instead
of lock_sock()
2. Modifying the flag after skb is charged to sk requires such
adjustment during bpf_setsockopt() and complicates the logic
unnecessarily
We can support other hooks later if a real use case justifies that.
Most changes are inline and hard to trace, but a microbenchmark on
__sk_mem_raise_allocated() during neper/tcp_stream showed that more
samples completed faster with sk->sk_bypass_prot_mem == 1. This will
be more visible under tcp_mem pressure (but it's not a fair comparison).
# bpftrace -e 'kprobe:__sk_mem_raise_allocated { @start[tid] = nsecs; }
kretprobe:__sk_mem_raise_allocated /@start[tid]/
{ @end[tid] = nsecs - @start[tid]; @times = hist(@end[tid]); delete(@start[tid]); }'
# tcp_stream -6 -F 1000 -N -T 256
Without bpf prog:
[128, 256) 3846 | |
[256, 512) 1505326 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1371006 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 198207 |@@@@@@ |
[2K, 4K) 31199 |@ |
With bpf prog in the next patch:
(must be attached before tcp_stream)
# bpftool prog load sk_bypass_prot_mem.bpf.o /sys/fs/bpf/test type cgroup/sock_create
# bpftool cgroup attach /sys/fs/cgroup/test cgroup_inet_sock_create pinned /sys/fs/bpf/test
[128, 256) 6413 | |
[256, 512) 1868425 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1101697 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 117031 |@@@@ |
[2K, 4K) 11773 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-6-kuniyu@google.com
|
||
|
Linus Torvalds
|
fbde105f13 |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
||
|
Sean Christopherson
|
fe2bf6234e |
KVM: guest_memfd: Add INIT_SHARED flag, reject user page faults if not set
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes:
|
||
|
Sean Christopherson
|
d2042d8f96 |
KVM: Rework KVM_CAP_GUEST_MEMFD_MMAP into KVM_CAP_GUEST_MEMFD_FLAGS
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't require a new capability, and so that developers aren't tempted to bundle multiple flags into a single capability. Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit value, but that limitation can be easily circumvented by adding e.g. KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more than 32 flags. Reviewed-by: Ackerley Tng <ackerleytng@google.com> Tested-by: Ackerley Tng <ackerleytng@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
284fc30e66 |
Merge tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"Just the follow up fixes for rc1 from the next branch, amdgpu and xe
mostly with a single v3d fix in there.
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
xe:
- Fix build with clang 16
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation
- Do not try late bind firmware when running as VF since it shouldn't
handle firmware loading
- Fix idle assertion for local BOs
- Fix uninitialized variable for late binding
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do
- Fix lock handling on suspend error path
- Fix I2C controller resume after S3
v3d:
- fix fence locking"
* tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/amd/display: Incorrect Mirror Cositing
drm/amd/display: Enable Dynamic DTBCLK Switch
drm/amdgpu: Report individual reset error
drm/amdgpu: partially revert "revert to old status lock handling v3"
drm/amd/display: Fix unsafe uses of kernel mode FPU
drm/amd/pm: Disable VCN queue reset on SMU v13.0.6 due to regression
drm/amdgpu: Fix general protection fault in amdgpu_vm_bo_reset_state_machine
drm/amdgpu: Check swus/ds for switch state save
drm/amdkfd: Fix two comments in kfd_ioctl.h
drm/amd/pm: Avoid interface mismatch messaging
drm/amdgpu: Merge amdgpu_vm_set_pasid into amdgpu_vm_init
drm/amd/amdgpu: Fix the mes version that support inv_tlbs
drm/amd: Check whether secure display TA loaded successfully
drm/amdkfd: Fix mmap write lock not release
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
drm/amdgpu: Fix for GPU reset being blocked by KIQ I/O.
drm/amd/display: Disable scaling on DCE6 for now
drm/amd/display: Properly disable scaling on DCE6
drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6
drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs
...
|
||
|
Linus Torvalds
|
eba41c0173 |
Merge tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe: - Fixup indentation in the UAPI header - Two fixes for zcrx. One fixes receiving too much in some cases, and the other deals with not correctly incrementing the source in the fallback copy loop - Fix for a race in the IORING_OP_WAITID command, where there was a small window where the request would be left on the wait_queue_head list even though it was being canceled/completed - Update liburing git URL in the kernel tree * tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring/zcrx: increment fallback loop src offset io_uring/zcrx: fix overshooting recv limit io_uring: use tab indentation for IORING_SEND_VECTORIZED comment io_uring/waitid: always prune wait queue entry in io_waitid_wait() io_uring: update liburing git URL |
||
|
Felix Kuehling
|
1f086d2508 |
drm/amdkfd: Fix two comments in kfd_ioctl.h
Queue read and write pointers are "to KFD", not "from KFD". Suggested-by: Robert Liu <robert.liu@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Robert Liu <robert.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Haiyue Wang
|
beb97995b9 |
io_uring: use tab indentation for IORING_SEND_VECTORIZED comment
Be consistent with tab style of "liburing/src/include/liburing/io_uring.h". Signed-off-by: Haiyue Wang <haiyuewa@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
2f2c725493 |
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
6093a688a0 |
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
||
|
Linus Torvalds
|
54ba6d9b13 |
Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
||
|
Linus Torvalds
|
908057d185 |
Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Drivers: - Add ciphertext hiding support to ccp - Add hashjoin, gather and UDMA data move features to hisilicon - Add lz4 and lz77_only to hisilicon - Add xilinx hwrng driver - Add ti driver with ecb/cbc aes support - Add ring buffer idle and command queue telemetry for GEN6 in qat Others: - Use rcu_dereference_all to stop false alarms in rhashtable - Fix CPU number wraparound in padata" * tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits) dt-bindings: rng: hisi-rng: convert to DT schema crypto: doc - Add explicit title heading to API docs hwrng: ks-sa - fix division by zero in ks_sa_rng_init KEYS: X.509: Fix Basic Constraints CA flag parsing crypto: anubis - simplify return statement in anubis_mod_init crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs crypto: hisilicon/qm - clear all VF configurations in the hardware crypto: hisilicon - enable error reporting again crypto: hisilicon/qm - mask axi error before memory init crypto: hisilicon/qm - invalidate queues in use crypto: qat - Return pointer directly in adf_ctl_alloc_resources crypto: aspeed - Fix dma_unmap_sg() direction rhashtable: Use rcu_dereference_all and rcu_dereference_all_check crypto: comp - Use same definition of context alloc and free ops crypto: omap - convert from tasklet to BH workqueue crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user() crypto: caam - double the entropy delay interval for retry padata: WQ_PERCPU added to alloc_workqueue users padata: replace use of system_unbound_wq with system_dfl_wq crypto: cryptd - WQ_PERCPU added to alloc_workqueue users ... |
||
|
Rong Tao
|
de7342228b |
bpf: Finish constification of 1st parameter of bpf_d_path()
The commit |
||
|
Linus Torvalds
|
f3826aa996 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit
|
||
|
Linus Torvalds
|
65989db7f8 |
Merge tag 'ext4_for_linus-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New ext4 features:
- Add support so tune2fs can modify/update the superblock using an
ioctl, without needing write access to the block device
- Add support for 32-bit reserved uid's and gid's
Bug fixes:
- Fix potential warnings and other failures caused by corrupted /
fuzzed file systems
- Fail unaligned direct I/O write with EINVAL instead of silently
falling back to buffered I/O
- Correectly handle fsmap queries for metadata mappings
- Avoid journal stalls caused by writeback throttling
- Add some missing GFP_NOFAIL flags to avoid potential deadlocks
under extremem memory pressure
Cleanups:
- Remove obsolete EXT3 Kconfigs"
* tag 'ext4_for_linus-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix checks for orphan inodes
ext4: validate ea_ino and size in check_xattrs
ext4: guard against EA inode refcount underflow in xattr update
ext4: implemet new ioctls to set and get superblock parameters
ext4: add support for 32-bit default reserved uid and gid values
ext4: avoid potential buffer over-read in parse_apply_sb_mount_options()
ext4: fix an off-by-one issue during moving extents
ext4: increase i_disksize to offset + len in ext4_update_disksize_before_punch()
ext4: verify orphan file size is not too big
ext4: fail unaligned direct IO write with EINVAL
ext4: correctly handle queries for metadata mappings
ext4: increase IO priority of fastcommit
ext4: remove obsolete EXT3 config options
jbd2: increase IO priority of checkpoint
ext4: fix potential null deref in ext4_mb_init()
ext4: add ext4_sb_bread_nofail() helper function for ext4_free_branches()
ext4: replace min/max nesting with clamp()
fs: ext4: change GFP_KERNEL to GFP_NOFS to avoid deadlock
|
||
|
Linus Torvalds
|
6238729bfc |
Merge tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi: - Extend copy_file_range interface to be fully 64bit capable (Miklos) - Add selftest for fusectl (Chen Linxuan) - Move fuse docs into a separate directory (Bagas Sanjaya) - Allow fuse to enter freezable state in some cases (Sergey Senozhatsky) - Clean up writeback accounting after removing tmp page copies (Joanne) - Optimize virtiofs request handling (Li RongQing) - Add synchronous FUSE_INIT support (Miklos) - Allow server to request prune of unused inodes (Miklos) - Fix deadlock with AIO/sync release (Darrick) - Add some prep patches for block/iomap support (Darrick) - Misc fixes and cleanups * tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (26 commits) fuse: move CREATE_TRACE_POINTS to a separate file fuse: move the backing file idr and code into a new source file fuse: enable FUSE_SYNCFS for all fuseblk servers fuse: capture the unique id of fuse commands being sent fuse: fix livelock in synchronous file put from fuseblk workers mm: fix lockdep issues in writeback handling fuse: add prune notification fuse: remove redundant calls to fuse_copy_finish() in fuse_notify() fuse: fix possibly missing fuse_copy_finish() call in fuse_notify() fuse: remove FUSE_NOTIFY_CODE_MAX from <uapi/linux/fuse.h> fuse: remove fuse_readpages_end() null mapping check fuse: fix references to fuse.rst -> fuse/fuse.rst fuse: allow synchronous FUSE_INIT fuse: zero initialize inode private data fuse: remove unused 'inode' parameter in fuse_passthrough_open virtio_fs: fix the hash table using in virtio_fs_enqueue_req() mm: remove BDI_CAP_WRITEBACK_ACCT fuse: use default writeback accounting virtio_fs: Remove redundant spinlock in virtio_fs_request_complete() fuse: remove unneeded offset assignment when filling write pages ... |
||
|
Bjorn Helgaas
|
fef3530379 |
Merge branch 'pci/capability-search'
- Simplify __pci_find_next_cap_ttl() by replacing magic numbers with #defines, extracting fields with FIELD_GET(), etc (Hans Zhang) - Convert __pci_find_next_cap_ttl() to a PCI_FIND_NEXT_CAP() macro that takes a config space accessor function so we can also use it in cases where the usual config accessors aren't available (Hans Zhang) - Similarly convert pci_find_next_ext_capability() to a PCI_FIND_NEXT_EXT_CAP() macro (Hans Zhang) - Implement dwc, dwc endpoint, and cadence capability search interfaces on top of PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP(), replacing the previous duplicated code (Hans Zhang) - Search for capabilities in the cadence core instead of hard-coding their offsets, which are subject to change (Hans Zhang) * pci/capability-search: PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets PCI: cadence: Implement capability search using PCI core APIs PCI: dwc: ep: Implement capability search using PCI core APIs PCI: dwc: Implement capability search using PCI core APIs PCI: Refactor extended capability search into PCI_FIND_NEXT_EXT_CAP() PCI: Refactor capability search into PCI_FIND_NEXT_CAP() PCI: Clean up __pci_find_next_cap_ttl() readability |
||
|
Linus Torvalds
|
e406d57be7 |
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton: - "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet completes the removal of this legacy IDR API - "panic: introduce panic status function family" from Jinchao Wang provides a number of cleanups to the panic code and its various helpers, which were rather ad-hoc and scattered all over the place - "tools/delaytop: implement real-time keyboard interaction support" from Fan Yu adds a few nice user-facing usability changes to the delaytop monitoring tool - "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos Petrongonas fixes a panic which was happening with the combination of EFI and KHO - "Squashfs: performance improvement and a sanity check" from Phillip Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen microbenchmark - plus another 50-odd singleton patches all over the place * tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits) Squashfs: reject negative file sizes in squashfs_read_inode() kallsyms: use kmalloc_array() instead of kmalloc() MAINTAINERS: update Sibi Sankar's email address Squashfs: add SEEK_DATA/SEEK_HOLE support Squashfs: add additional inode sanity checking lib/genalloc: fix device leak in of_gen_pool_get() panic: remove CONFIG_PANIC_ON_OOPS_VALUE ocfs2: fix double free in user_cluster_connect() checkpatch: suppress strscpy warnings for userspace tools cramfs: fix incorrect physical page address calculation kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit Squashfs: fix uninit-value in squashfs_get_parent kho: only fill kimage if KHO is finalized ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name() kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock coccinelle: platform_no_drv_owner: handle also built-in drivers coccinelle: of_table: handle SPI device ID tables lib/decompress: use designated initializers for struct compress_format efi: support booting with kexec handover (KHO) ... |
||
|
Linus Torvalds
|
8804d970fa |
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
||
|
Linus Torvalds
|
07fdad3a93 |
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|