Convert remaining __init__ files similar to what we did in
commit b615879dbf ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On fast machines the tests run in quick succession so even
when tests clean up after themselves the carrier may need
some time to come back.
Specifically in NIPA when ping.py runs right after netpoll_basic.py
the first ping command fails.
Since the context manager callbacks are now common NetDrvEpEnv
gets an ip link up call as well.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250812142054.750282-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the `check_for_dependencies()` function in `lib_netcons.sh` to check
whether IPv6 is enabled by verifying the existence of
`/proc/net/if_inet6`. Having IPv6 is a now a dependency of netconsole
tests. If the file does not exist, the script will skip the test with an
appropriate message suggesting to verify if `CONFIG_IPV6` is enabled.
This prevents the test to misbehave if IPv6 is not configured.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netcons_test_ipv6-v1-1-41c9092f93f9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make require_cmd() calls explicit about whether commands are needed
locally, remotely, or both.
Since require_cmd() defaults to local=True, tests should explicitly set
local=False when commands are only needed remotely.
- socat: Set local=False since it's only needed on remote hosts.
- iperf3: Use single call with both local=True and remote=True since
it's needed on both hosts.
This avoids unnecessary test failures when commands are missing locally
but available remotely where actually needed, and consolidates a
duplicate require_cmd() call into single call that checks both hosts.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Fixes: f1e68a1a4a ("selftests: drv-net: add require_XYZ() helpers for validating env")
Fixes: c76bab22e9 ("selftests: drv-net: rss_input_xfrm: Check test prerequisites before running")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The require_cmd() method was checking for command availability locally
even when remote=True was specified, due to a missing host parameter.
Fix by passing host=self.remote when checking remote command
availability, ensuring commands are verified on the correct host.
Fixes: f1e68a1a4a ("selftests: drv-net: add require_XYZ() helpers for validating env")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpftrace is very useful for low level driver testing. perf or trace-cmd
would also do for collecting data from tracepoints, but they require
much more post-processing.
Add a wrapper for running bpftrace and sanitizing its output.
bpftrace has JSON output, which is great, but it prints loose objects
and in a slightly inconvenient format. We have to read the objects
line by line, and while at it return them indexed by the map name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-1-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add IPv6 support to the netconsole basic functionality tests by:
- Introducing separate IPv4 and IPv6 address variables (SRCIP4/SRCIP6,
DSTIP4/DSTIP6) to replace the single SRCIP/DSTIP variables
- Adding select_ipv4_or_ipv6() function to choose protocol version
- Updating socat configuration to use UDP6-LISTEN for IPv6 tests
- Adding wait_for_port() wrapper to handle protocol-specific port waiting
- Expanding test matrix to run both basic and extended formats against
both IPv4 and IPv6 protocols
- Improving cleanup to kill any remaining socat processes
- Adding sleep delays for better IPv6 packet handling reliability
The test now validates netconsole functionality across both IP versions,
improving test coverage for dual-stack network environments.
This test would avoid the regression fixed by commit f599020702 ("net:
netpoll: Initialize UDP checksum field before checksumming")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-7-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test suite validates the functionality of the devlink-rate API for
traffic class (TC) bandwidth allocation. It ensures that bandwidth can
be distributed between different traffic classes as configured, and
verifies that explicit TC-to-queue mapping is required for the
allocation to be effective.
The first test (test_no_tc_mapping_bandwidth) is marked as expected
failure on mlx5, since the hardware automatically enforces traffic
class separation by dynamically moving queues to the correct TC
scheduler, even without explicit TC-to-queue mapping configuration.
Test output on mlx5:
1..2
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results without TC mapping:
# TC 3: 0.19 Gbits/sec
# TC 4: 0.76 Gbits/sec
# Total bandwidth: 0.95 Gbits/sec
# TC 3 percentage: 20.0%
# TC 4 percentage: 80.0%
ok 1 devlink_rate_tc_bw.test_no_tc_mapping_bandwidth # XFAIL Bandwidth matched 80/20 split without TC mapping
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results with TC mapping:
# TC 3: 0.21 Gbits/sec
# TC 4: 0.78 Gbits/sec
# Total bandwidth: 0.98 Gbits/sec
# TC 3 percentage: 21.1%
# TC 4 percentage: 78.9%
# Bandwidth is distributed as 80/20 with TC mapping
ok 2 devlink_rate_tc_bw.test_tc_mapping_bandwidth
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new selftest to verify netconsole module loading with command
line arguments. This test exercises the init_netconsole() path and
validates proper parsing of the netconsole= parameter format.
The test:
- Loads netconsole module with cmdline configuration instead of
dynamic reconfiguration
- Validates message transmission through the configured target
- Adds helper functions for cmdline string generation and module
validation
This complements existing netconsole selftests by covering the
module initialization code path that processes boot-time parameters.
This test is useful to test issues like the one described in [1].
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-8-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the network device and namespace cleanup logic from the
cleanup() function into a new do_cleanup() helper in lib_netcons.sh.
The do_cleanup() function only unconfigure the network and
printk, while cleanup() cleans the netconsole targets plus the network
and printk.
This refactoring let this code to be reused in cases netconsole dynamic
is not being used, as in the upcoming patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-7-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the netconsole selftest to validate both basic and extended
target formats. The basic format is a simpler variant that doesn't
support userdata or release functionality.
The test now validates that netconsole works correctly in both
configurations, improving test coverage for different netconsole
deployment scenarios.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-4-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the exit call from validate_result() function and move the
test exit logic to the main script. This allows the function to
be reused in scenarios where the test needs to continue execution
after validation, rather than terminating immediately.
The validate_result() function should focus on validation logic
only, while the calling script maintains control over program
flow and exit conditions. This change improves code modularity
and prepares for potential future enhancements where multiple
validations might be needed in a single test run.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-3-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function wait_local_port_listen() is the only function defined in
net_helper.sh. Since some tests source both lib.sh and net_helper.sh,
we can simplify the setup by moving wait_local_port_listen() to lib.sh.
With this change, net_helper.sh becomes redundant and can be removed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert fbbf93556f ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc5439 ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refering to C binaries from Python code is going to be a common
need. Add a helper to convert from path in relation to the test.
Meaning, if the test is in the same directory as the binary, the
call would be simply: cfg.rpath("binary").
The helper name "rpath" is not great. I can't think of a better
name that would be accurate yet concise.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new selftest to verify that the netconsole module correctly
handles CPU runtime data in sysdata. The test validates three scenarios:
1. Basic CPU sysdata functionality - verifies that cpu=X is appended to
messages
2. CPU sysdata with userdata - ensures CPU data works alongside userdata
3. Disabled CPU sysdata - confirms no CPU data is included when disabled
The test uses taskset to control which CPU sends messages and verifies
the reported CPU matches the one used. This helps ensure that netconsole
accurately tracks and reports the originating CPU of messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new selftest to verify netconsole's handling of messages that
exceed the packet size limit and require fragmentation. The test sends
messages with varying sizes and userdata, validating that:
1. Large messages are correctly fragmented and reassembled
2. Userdata fields are properly preserved across fragments
3. Messages work correctly with and without kernel release version
appending
The test creates a networking environment using netdevsim, sends
messages through /dev/kmsg, and verifies the received fragments maintain
message integrity.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify the cleanup function to remove all userdata keys created during the
test, instead of just deleting a single predefined key. This ensures a
more thorough cleanup of temporary resources.
Move the KEY_PATH variable definition inside the set_user_data function
to reduce global variables and improve encapsulation. The KEY_PATH
variable is now dynamically created when setting user data.
This change has no effect on the current test, while improving an
upcoming test that would create several userdata entries.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-3-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split helper functions from the netconsole basic test into a separate
library file to enable reuse across different netconsole tests. This
change only moves the existing helper functions to lib/sh/lib_netcons.sh
while preserving the same test functionality.
The helpers provide common functions for:
- Setting up network namespaces and interfaces
- Managing netconsole dynamic targets
- Setting user data
- Handling test dependencies
- Cleanup operations
Do not make any change in the code, other than the mechanical
separation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-2-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of our tests use rtnetlink to read device stats, so they
don't expose the drivers much to paths in which device stats
are read under RCU. Add tests which hammer profcs reads to
make sure drivers:
- don't sleep while reporting stats,
- can handle parallel reads,
- can handle device going down while reading.
Set ifname on the env class in NetDrvEnv, we already do that
in NetDrvEpEnv.
KTAP version 1
1..7
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
ok 6 stats.procfs_hammer
# completed up/down cycles: 6
ok 7 stats.procfs_downup_hammer
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250107022932.2087744-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest case to check the send and receive throughput.
Supported link modes between local NIC driver and partner
are varied. Then send and receive throughput is captured
and verified. Test uses iperf3 tool.
Add iperf3 server/client function in GenerateTraffic class.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new @ksft_disruptive decorator to mark the tests that might
be disruptive to the system. Depending on how well the previous
test works in the CI we might want to disable disruptive tests
by default and only let the developers run them manually.
KSFT framework runs disruptive tests by default. DISRUPTIVE=False
environment (or config file) can be used to disable these tests.
ksft_setup should be called by the test cases that want to use
new decorator (ksft_setup is only called via NetDrvEnv/NetDrvEpEnv for now).
In the future we can add similar decorators to, for example, avoid
running slow tests all the time. And/or have some option to run
only 'fast' tests for some sort of smoke test scenario.
$ DISRUPTIVE=False ./stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down # SKIP marked as disruptive
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0
v3:
- parse yes and properly treat non-zero nums as true (Petr)
v2:
- convert from cli argument to env variable (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.
The test works with netdevsim by default or with a real device by
setting NETIF.
Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We created a separate directory for HW-only tests, recently.
Glue in the Python test library there, Python is a bit annoying
when it comes to using library code located "lower"
in the directory structure.
Reuse the Env class, but let tests require non-nsim setup.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
More complex tests often have to spawn a background process,
like a server which will respond to requests or tcpdump.
Add support for creating such processes using the with keyword:
with bkg("my-daemon", ..):
# my-daemon is alive in this block
My initial thought was to add this support to cmd() directly
but it runs the command in the constructor, so by the time
we __enter__ it's too late to make sure we used "background=True".
Second useful helper transplanted from net_helper.sh is
wait_port_listen().
The test itself uses socat, which insists on v6 addresses
being wrapped in [], it's not the only command which requires
this format, so add the wrapped address to env. The hope
is to save test code from checking if address is v6.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
