drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Add register definitions for sharpness strength and
filter window size used by CASF. Provide functions to
read and write these fields.
The sharpness strength value is determined by user input,
while the winsize is based on the resolution. The casf_enable
flag should be set if the platform supports sharpness adjustments
and the user API strength is not zero. Once sharpness is
enabled, update the strength bit of the register whenever
the user changes the strength value, as the enable bit and
winsize bit remain constant.
Introduce helper to enable, disable and update strength.
Add relavant strength and winsize in both enable and disable.
v2: Introduce get_config for casf[Ankit]
v3: Replace 0 with FILTER_STRENGTH_MASK[Ankit]
v4: After updating strength add win_sz register
v5: Replace u16 with u32 for total_pixel
v6: Add casf logging
v7: Add helper for enable and disable casf
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251028120747.3027332-4-ankit.k.nautiyal@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a new helper thingy to deal with the pipe prefill latency.
We get three potentially useful thigns out of this:
- skl_prefill_vblank_too_short() used for checking the
actual vblank/guardband length
- skl_prefill_min_guardband() to calculate a suitable guardband
size based on some worst case scaling/etc. estimates
- skl_prefill_min_cdclk() used to calculate a minimum cdclk
frequency required for very small vblank lengths (in case the
otherwise computed minimum cdclk doesn't result in fast enough
prefill).
The internal arithmetic is done terms of scanlines using .16
binary fixed point representation.
v2: Add the missing <<16 for framestart_delay
Drop the cdclk_state stuff in favor of crtc_state->min_cdclk
Rename to skl_prefill since this is skl+ only
Use intel_crtc_vblank_length() instead of hand rolling it
memset(0) in prefill_init()
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-9-ville.syrjala@linux.intel.com
We already have control functions that we use to control the VF
state on the per-GT basis, but that is low level detail from the
user point of view, who rather expects VF-level functions.
For now add simple functions that just iterate over all GTs and
call per-GT control function. We will soon allow to use some of
them from the user facing interfaces like debugfs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250930233525.201263-2-michal.wajdeczko@intel.com
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
Introduce xe_late_bind_fw to enable firmware loading for the devices,
such as the fan controller, during the driver probe. Typically,
firmware for such devices are part of IFWI flash image but can be
replaced at probe after OEM tuning.
This patch binds mei late binding component to enable firmware loading.
v2:
- Add devm_add_action_or_reset to remove the component (Daniele)
- Add INTEL_MEI_GSC check in xe_late_bind_init() (Daniele)
v3:
- Fail driver probe if late bind initialization fails,
add has_late_bind flag (Daniele)
v4:
- %s/I915_COMPONENT_LATE_BIND/INTEL_COMPONENT_LATE_BIND/
v6:
- rebased
v7:
- rebased
- In xe_late_bind_init, use drm_err when returning an error to
stop the probe (Lucas)
- Use imperative mode in commit message (Lucas)
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-4-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We want all validation (potential backing store allocation) to be part
of a drm_exec transaction. Therefore add a drm_exec pointer argument
to xe_bo_validate() and ___xe_bo_create_locked(). Upcoming patches
will deal with making all (or nearly all) calls to these functions
part of a drm_exec transaction. In the meantime, define special values
of the drm_exec pointer:
XE_VALIDATION_UNIMPLEMENTED: Implementation of the drm_exec transaction
has not been done yet.
XE_VALIDATION_UNSUPPORTED: Some Middle-layers (dma-buf) doesn't allow
the drm_exec context to be passed down to map_attachment where
validation takes place.
XE_VALIDATION_OPT_OUT: May be used only for kunit tests where exhaustive
eviction isn't crucial and the ROI of converting those is very
small.
For XE_VALIDATION_UNIMPLEMENTED and XE_VALIDATION_OPT_OUT there is also
a lockdep check that a drm_exec transaction can indeed start at the
location where the macro is expanded. This is to encourage
developers to take this into consideration early in the code
development process.
v2:
- Fix xe_vm_set_validation_exec() imbalance. Add an assert that
hopefully catches future instances of this (Matt Brost)
v3:
- Extend to psmi_alloc_object
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v3
Link: https://lore.kernel.org/r/20250908101246.65025-2-thomas.hellstrom@linux.intel.com
Goal here is cut over to gpusvm and remove xe_hmm, relying instead on
common code. The core facilities we need are get_pages(), unmap_pages()
and free_pages() for a given useptr range, plus a vm level notifier
lock, which is now provided by gpusvm.
v2:
- Reuse the same SVM vm struct we use for full SVM, that way we can
use the same lock (Matt B & Himal)
v3:
- Re-use svm_init/fini for userptr.
v4:
- Allow building xe without userptr if we are missing DRM_GPUSVM
config. (Matt B)
- Always make .read_only match xe_vma_read_only() for the ctx. (Dafna)
v5:
- Fix missing conversion with CONFIG_DRM_XE_USERPTR_INVAL_INJECT
v6:
- Convert the new user in xe_vm_madise.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-17-matthew.auld@intel.com
The frontend exposes an API to the driver to send invalidations, handles
sequence number assignment, synchronization (fences), and provides a
timeout mechanism. The backend issues the actual invalidation to the
hardware (or firmware).
The new layering easily allows issuing TLB invalidations to different
hardware or firmware interfaces.
Normalize some naming while here too.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-10-stuart.summers@intel.com
Gfx device reports two classes of errors: uncorrectable and
correctable. Depending on the severity uncorrectable errors are further
classified Non-Fatal and Fatal.
Correctable and Non-Fatal errors: These errors are reported as MSI. Bits in
the Master Interrupt Register indicate the class of the error.
The source of the error is then read from the Device Error Source
Register.
Fatal errors: These are reported as PCIe errors
When a PCIe error is asserted, the OS will perform a SBR (Secondary
Bus reset) which causes the driver to reload. The error registers are
sticky and the values are maintained through SBR.
Add basic support to handle these errors.
Bspec: 50875, 53073, 53074, 53075, 53076
v2: Format commit message (Umesh)
v3: fix documentation (Stuart)
Cc: Stuart Summers <stuart.summers@intel.com>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-9-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This driver-specific ioctl enables UMDs to control the memory attributes
for GPU VMAs within a specified input range. If the start or end
addresses fall within an existing VMA, the VMA is split accordingly. The
attributes of the VMA are modified as provided by the users. The old
mappings of the VMAs are invalidated, and TLB invalidation is performed
if necessary.
v2(Matthew brost)
- xe_vm_in_fault_mode can't be enabled by Mesa, hence allow ioctl in non
fault mode too
- fix tlb invalidation skip for same ranges in multiple op
- use helper for tlb invalidation
- use xe_svm_notifier_lock/unlock helper
- s/lockdep_assert_held/lockdep_assert_held_write
- Add kernel-doc
v3(Matthew Brost)
- make vfunc fail safe
- Add sanitizing input args before vfunc
v4(Matthew Brost/Shuicheng)
- Make locks interruptable
- Error handling fixes
- vm_put fixes
v5(Matthew Brost)
- Flush garbage collector before any locking.
- Add check for null vma
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-9-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Requirement for PSMI capture is to have a physically contiguous buffer.
All the needed configuration is done by the userspace tool directly to
the GPU via mmio access.
This interface only support allocating from VRAM regions. For integrated
devices, the PSMI buffer is in SYSTEM memory and should be allocated by
userspace using hugetlbfs.
Here we add the ability to allocate a region of physically contiguous
memory by writing to debugfs file (listed below). For multi-tile devices,
the capture tool requires ability to allocate a capture buffer per tile
(VRAM region) and so user can specify a region_mask. The tool then
can mmap the buffers via direct mmap of the PCIBAR via sysfs.
To support the capture tool, 3 new debugfs entries are added:
psmi_capture_addr - physical address per VRAM region's capture buffer
psmi_capture_region_mask - select which region(s) to allocate a buffer
psmi_capture_size - size of current capture buffer
Writing psmi_capture_size will allocate new buffer of requested size per
region after freeing any current buffers.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Brian Welty <brian.welty@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> # v2
Link: https://lore.kernel.org/r/20250821-psmi-v5-2-34ab7550d3d8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Allow the driver to expose hardware register spaces to userspace
through GEM objects with fake mmap offsets. This can be useful
for userspace-firmware communication, debugging, etc.
v2: Minor doc fix (CI)
v3: Enforce MAP_SHARED (Tejas)
Add fault handler with dummy page (Tejas, Matt Auld)
Store physical address instead of xe_mmio in the GEM object (MattB)
v4: Separate xe_mmio_gem from xe_mmio and make it private (MattB)
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250714122658.1803-1-ilia.levi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add generic dependecy jobs / scheduler which serves as wrapper for DRM
scheduler. Useful when we want delay a generic operation until a
dma-fence signals.
Existing use cases could be destroying of resources based fences /
dma-resv, the preempt rebind worker, and pipelined GT TLB invalidations.
Written in such a way it could be moved to DRM subsystem if needed.
v3:
- Remove unnecessary cast (Staurt)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-3-matthew.brost@intel.com
While some VF/PF relay actions must be handled on the GT level,
like query for runtime registers, it was clarified by the arch
team that initial version negotiation can be done by the VF just
once, by using any available GuC/GT.
Move handling of the VF/PF ABI version negotiation on the PF side
from the GT level functions to the device level functions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-7-michal.wajdeczko@intel.com
There are some workarounds that must be appplied before gt init,
wa_15015404425 for example. Instead of sprinking them conditionally
throughout the driver as we did for i915 generate an oob.rules file
reusing the RTP infrastructure to make these easier to track.
v2: rename xe_soc_wa to xe_device_wa
v5: derive prefix from argument rather than hard coding the values.
v6: split out xe_gen-wa_oob changes
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250709221605.172516-3-matthew.s.atwood@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Provide the lower level code for PIPEDMC based flip queue.
We'll use the so called semi-full flip queue mode where the
PIPEDMC will start the provided DSB on a scanline a little
ahead of the vblank. We need to program the triggering scanline
early enough so that the DSB has enough time to complete writing
all the double buffered registers before they get latched (at
start of vblank).
The firmware implements several queues:
- 3 "plane queues" which execute a single DSB per entry
- 1 "general queue" which can apparently execute 2 DSBs per entry
- 1 vestigial "fast queue" that replaced the "simple flip queue"
on ADL+, but this isn't supposed to be used due to issues.
But we only need a single plane queue really, and we won't actually
use it as a real queue because we don't allow queueing multiple commits
ahead of time. So the whole thing is perhaps useless. I suppose
there migth be some power saving benefits if we would get the flip
scheduled by userspace early and then could keep some hardware powered
off a bit longer until the DMC kicks off the flipq programming. But that
is pure speculation at this time and needs to be proven.
The code to hook up the flip queue into the actual atomic commit
path will follow later.
TODO: need to think how to do the "wait for DMC firmware load" nicely
need to think about VRR and PSR
etc.
v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl
Don't oops at flipq init if there is no dmc
v3: Adapt to PTL+ flipq changes (different queue entry
layout, different trigger event, need VRR TG)
Use the actual CDCLK frequency
Ask the DSB code how long things are expected to take
v3: Adjust the cdclk rounding (docs are 100% vague, Windows
rounds like this)
Initialize some undocumented magic DMC variables on PTL
v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in
PIPEDMC_FQ_CTRL is apparently gone on LNL+)
Based the preempt timeout on the max exec time
Preempt before disabling the flip queue
Order the PIPEDMC_SCANLINECMP* writes a bit more carefully
Fix some typos
v5: Try to deal with some clang-20 div-by-zero false positive (Nathan)
Add some docs (Jani)
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
epr
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
Core Changes:
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aADWaEFKVmxSnDLo@fedora
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
Registers a configfs subsystem called 'xe' that creates a
directory in the mounted configfs directory (/sys/kernel/config)
Userspace can then create the device that has to be configured
under the xe directory
mkdir /sys/kernel/config/xe/0000:03:00.0
The device created will have the following attributes to be
configured
/sys/kernel/config/xe/
.. 0000:03:00.0/
... survivability_mode
v2: fix kernel-doc
fix return value (Lucas)
v3: fix kernel-doc (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
