Pull thermal control updates from Rafael Wysocki:
"These include one thermal core fix for an issue leading to a NULL
pointer dereference, a similar fix for the int340x thermal driver
(even though the issue may not actually occur in practice in this
particular case), and a bunch of cleanups, mostly related to replacing
kzalloc() with kcalloc() where applicable.
Summary:
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi)
- Check a pointer against NULL early in int3402_thermal_probe() to
avoid a potential NULL pointer dereference (Chenyuan Yang)
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards)
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King)
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET)"
* tag 'thermal-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add NULL check for adev
thermal: core: Delay exposing sysfs interface
thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
thermal: intel: Clean up zone_trips[] initialization in int340x_thermal_zone_add()
thermal: hisi: Use kcalloc() instead of kzalloc() with multiplication
thermal: int340x: Use kcalloc() instead of kzalloc() with multiplication
thermal: k3_j72xx_bandgap: Use kcalloc() instead of kzalloc()
thermal/of: Use kcalloc() instead of kzalloc() with multiplication
thermal/debugfs: replace kzalloc() with kcalloc() in thermal_debug_tz_add()
Merge thermal core updates and miscellaneous updates of the thermal
control subsystem for 6.15-rc1:
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi).
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King).
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards).
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET).
* thermal-core:
thermal: core: Delay exposing sysfs interface
thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
* thermal-misc:
thermal: intel: Clean up zone_trips[] initialization in int340x_thermal_zone_add()
thermal: hisi: Use kcalloc() instead of kzalloc() with multiplication
thermal: int340x: Use kcalloc() instead of kzalloc() with multiplication
thermal: k3_j72xx_bandgap: Use kcalloc() instead of kzalloc()
thermal/of: Use kcalloc() instead of kzalloc() with multiplication
thermal/debugfs: replace kzalloc() with kcalloc() in thermal_debug_tz_add()
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab4
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
Fixes: 77e337c6e2 ("Thermal: introduce INT3402 thermal driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250313043611.1212116-1-chenyuan0y@gmail.com
[ rjw: Subject edit, added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There's a race between initializing the governor and userspace accessing
the sysfs interface. From time to time the Intel graphics CI shows this
signature:
<1>[] #PF: error_code(0x0000) - not-present page
<6>[] PGD 0 P4D 0
<4>[] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[] CPU: 3 UID: 0 PID: 562 Comm: thermald Not tainted 6.14.0-rc4-CI_DRM_16208-g7e37396f86d8+ #1
<4>[] Hardware name: Intel Corporation Twin Lake Client Platform/AlderLake-N LP5 RVP, BIOS TWLNFWI1.R00.5222.A01.2405290634 05/29/2024
<4>[] RIP: 0010:policy_show+0x1a/0x40
thermald tries to read the policy file between the sysfs files being
created and the governor set by thermal_set_governor(), which causes the
NULL pointer dereference.
Similarly to the hwmon interface, delay exposing the sysfs files to when
the governor is already set.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13655
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20250307-thermal-sysfs-race-v1-1-8a3d4d4ac9c4@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We are going to apply a new series that conflicts with pending
work in x86/mm, so merge in x86/mm to avoid it, and also to
refresh the x86/cpu branch with fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
params->total_weight is not initialized during bind and not updated when
the bound cdev changes. The cooling device weight will not be used due
to the uninitialized total_weight, until an update via sysfs is
triggered.
The bound cdevs are updated during thermal zone registration, where each
cooling device will be bound to the thermal zone one by one, but
power_allocator_bind() can be called without an additional cdev update
when manually changing the policy of a thermal zone via sysfs.
Add a new function to handle weight update logic, including updating
total_weight, and call it when bind, weight changes, and cdev updates to
ensure total_weight is always correct.
Fixes: a3cd6db4cc ("thermal: gov_power_allocator: Support new update callback of weights")
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Link: https://patch.msgid.link/20250222-fix-power-allocator-weight-v2-1-a94de86b685a@chromium.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since thermal_of_should_bind() terminates the loop after processing
the first child found in cooling-maps, it will never match more than
one cdev to a given trip point which is incorrect, as there may be
cooling-maps associating one trip point with multiple cooling devices.
Address this by letting the loop continue until either all
children have been processed or a matching one has been found.
To avoid adding conditionals or goto statements, put the loop in
question into a separate function and make that function return
right away after finding a matching cooling-maps entry.
Fixes: 94c6110b0b ("thermal/of: Use the .should_bind() thermal zone callback")
Link: https://lore.kernel.org/linux-pm/20250219-fix-thermal-of-v1-1-de36e7a590c4@chromium.org/
Reported-by: Yu-Che Cheng <giver@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Yu-Che Cheng <giver@chromium.org>
Tested-by: Yu-Che Cheng <giver@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2788228.mvXUDI8C0e@rjwysocki.net
divvy_up_power() should use weighted_req_power instead of req_power to
calculate granted_power. Otherwise, granted_power may be unexpected as
the denominator total_req_power is a weighted sum.
This is a mistake made during the previous refactor.
Replace req_power with weighted_req_power in divvy_up_power()
calculation.
Fixes: 912e97c67c ("thermal: gov_power_allocator: Move memory allocation out of throttle()")
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250219-fix-power-allocator-calc-v1-1-48b860291919@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge updates of Intel thermal drivers for 6.14:
- Add support for Panther Lake processors in multiple places (Zhang
Rui, Srinivas Pandruvada).
- Remove explicit user_space governor selection from Intel thermal
drivers (Srinivas Pandruvada).
* thermal-intel:
thermal: intel: Fix compile issue when CONFIG_NET is not defined
thermal: intel: int340x: Panther Lake power floor and workload hint support
thermal: intel: int340x: Panther Lake DLVR support
thermal: intel: Remove explicit user_space governor selection
ACPI: DPTF: Support Panther Lake
thermal: intel: int340x: processor: Enable MMIO RAPL for Panther Lake
powercap: intel_rapl: Add support for Panther Lake platform
Currently some user space programs like Linux thermald needs to register
to get notifications from both thermal user space governor and also
Thermal netlink. This is required as some messages like HFI (Hardware
Feedback Notifications) requires Thermal netlink.
This results in additional processing in kernel and user space to process
both notifications. The cost of using user space governor using
kobject_uevent is much higher as this is also used by other user space
daemons like udev daemon.
Do not select user_space thermal governor by default. If it is present
user space programs can always use this governor by writing to
"policy" attribute.
Instead from the kernel select THERMAL_NETLINK. Trip temperature
violation can be received by user space programs via thermal netlink
events:
THERMAL_GENL_EVENT_TZ_TRIP_UP
THERMAL_GENL_EVENT_TZ_TRIP_DOWN
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20241216190821.1137162-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current implementation does not work if the thermal zone is
interrupt driven only.
The boundaries are not correctly checked and computed as it happens
only when the temperature is increasing or decreasing.
The problem arises because the routine to detect when we cross a
threshold is correlated with the computation of the boundaries. We
assume we have to recompute the boundaries when a threshold is crossed
but actually we should do that even if the it is not the case.
Mixing the boundaries computation and the threshold detection for the
sake of optimizing the routine is much more complex as it appears
intuitively and prone to errors.
This fix separates the boundaries computation and the threshold
crossing detection into different routines. The result is a code much
more simple to understand, thus easier to maintain.
The drawback is we browse the thresholds list several time but we can
consider that as neglictible because that happens when the temperature
is updated. There are certainly some aeras to improve in the
temperature update routine but it would be not adequate as this change
aims to fix the thresholds for v6.13.
Fixes: 445936f9e2 ("thermal: core: Add user thresholds support")
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # rock5b, Lenovo x13s
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20241216212644.1145122-1-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more thermal control updates from Rafael Wysocki:
"These fix a Power Allocator thermal governor issue reported recently,
update the Intel int3400 thermal driver and simplify DT data parsing
in the thermal control subsystem:
- Add a NULL pointer check that was missed by recent modifications of
the Power Allocator thermal governor (Rafael Wysocki)
- Remove the data_vault attribute_group from int3400 because it is
only used for exposing one binary file that can be exposed directly
(Thomas Weißschuh)
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems
(Srinivas Pandruvada)
- Use the cleanup.h mechanics to simplify DT data parsing in the
thermal core and some drivers (Krzysztof Kozlowski)"
* tag 'thermal-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: sun8i: Use scoped device node handling to simplify error paths
thermal: tegra: Simplify with scoped for each OF child loop
thermal: qcom-spmi-adc-tm5: Simplify with scoped for each OF child loop
thermal: of: Use scoped device node handling to simplify of_thermal_zone_find()
thermal: of: Use scoped memory and OF handling to simplify thermal_of_trips_init()
thermal: of: Simplify thermal_of_should_bind with scoped for each OF child
thermal: gov_power_allocator: Add missing NULL pointer check
thermal: int3400: Remove unneeded data_vault attribute_group
thermal: int3400: Fix reading of current_uuid for active policy
Merge updates of Intel int3400 thermal driver for 6.13-rc1:
- Remove the data_vault attribute_group from int3400 because it is only
used for exposing one binary file that can be exposed directly (Thomas
Weißschuh).
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems (Srinivas
Pandruvada).
* thermal-intel:
thermal: int3400: Remove unneeded data_vault attribute_group
thermal: int3400: Fix reading of current_uuid for active policy
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
Obtain the device node reference and allocate memory with
scoped/cleanup.h to reduce error handling and make the code a bit
simpler.
The code is not equivalent in one minor aspect: outgoing parameter
"*ntrips" will not be zeroed on errors of memory allocation. This
difference is not important, because code was already not zeroing it in
case of earlier errors and the only caller does not rely on ntrips being
0 in case of errors.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-2-bfbe29ad81f4@linaro.org
[ rjw: Rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the current_uuid attribute is set to the active policy UUID,
reading back the same attribute is returning "INVALID" instead of
the active policy UUID on some platforms before Ice Lake.
In platforms before Ice Lake, firmware provides a list of supported
thermal policies. In this case, user space can select any of the
supported thermal policies via a write to attribute "current_uuid".
In commit c7ff297639 ("thermal: int340x: Update OS policy capability
handshake")', the OS policy handshake was updated to support Ice Lake
and later platforms and it treated priv->current_uuid_index=0 as
invalid. However, priv->current_uuid_index=0 is for the active policy,
only priv->current_uuid_index=-1 is invalid.
Fix this issue by updating the priv->current_uuid_index check.
Fixes: c7ff297639 ("thermal: int340x: Update OS policy capability handshake")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.18+ <stable@vger.kernel.org> # 5.18+
Link: https://patch.msgid.link/20241114200213.422303-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more thermal control updates from Rafael Wysocki:
"These update a few thermal drivers used on ARM platforms and thermal
tools:
- Add SAR2130P compatible to DT bindings in the QCom Tsens driver
(Dmitry Baryshkov)
- Add static annotation to arrays describing platform sensors in the
LVTS Mediatek driver (Colin Ian King)
- Switch back to struct platform_driver::remove() from the previous
callbacks prototype rework (Uwe Kleine-König)
- Add MSM8937 compatible to DT bindings and its support in the QCom
Tsens driver (Barnabás Czémán)
- Remove a pointless sign test on an unsigned value in
k3_bgp_read_temp() in the k3_j72xx_bandgap driver (Rex Nie)
- Fix a pointer reference loss when realloc() fails in the thermal
library (Zhang Jiao)"
* tag 'thermal-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix common realloc mistake
thermal/drivers/k3_j72xx_bandgap: Simplify code in k3_bgp_read_temp()
thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
dt-bindings: thermal: tsens: Add MSM8937
thermal: Switch back to struct platform_driver::remove()
thermal/drivers/mediatek/lvts_thermal: Make read-only arrays static const
dt-bindings: thermal: qcom-tsens: Add SAR2130P compatible
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
Merge updates of thermal drivers for 6.13-rc1 from Daniel Lezcano:
"- Add the SAR2130P compatible in the DT bindings for the QCom Tsens
driver (Dmitry Baryshkov)
- Add the static annotation to the arrays describing the platform
sensors on the LVTS Mediatek driver (Colin Ian King)
- Switch back to the struct platform_driver::remove() from the
previous callbacks prototype rework (Uwe Kleine-König)
- Add the MSM8937 compatible in the DT bindings and its support in the
QCom Tsens driver (Barnabás Czémán)
- Remove a pointless sign test on an unsigned value in
k3_bgp_read_temp() function on the k3_j72xx_bandgap driver (Rex Nie)
- Fix a pointer reference lost when the call to realloc() fails in the
thermal library (Zhang Jiao)"
* tag 'thermal-v6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
tools/thermal: Fix common realloc mistake
thermal/drivers/k3_j72xx_bandgap: Simplify code in k3_bgp_read_temp()
thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
dt-bindings: thermal: tsens: Add MSM8937
thermal: Switch back to struct platform_driver::remove()
thermal/drivers/mediatek/lvts_thermal: Make read-only arrays static const
dt-bindings: thermal: qcom-tsens: Add SAR2130P compatible
Pull x86 cpuid updates from Borislav Petkov:
- Add a feature flag which denotes AMD CPUs supporting workload
classification with the purpose of using such hints when making
scheduling decisions
- Determine the boost enumerator for each AMD core based on its type:
efficiency or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective
core
- Add a feature flag to denote AMD cores which have heterogeneous
topology and enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
* tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu()
x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM()
x86/cpu: Fix formatting of cpuid_bits[] in scattered.c
x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit
x86/amd: Use heterogeneous core topology for identifying boost numerator
x86/cpu: Add CPU type to struct cpuinfo_topology
x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD
x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES
x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
Add a thermal cooling driver to provide path to access PCIe bandwidth
controller using the usual thermal interfaces.
A cooling device is instantiated for controllable PCIe Ports from the
bwctrl service driver.
If registering the cooling device fails, allow bwctrl's probe to succeed
regardless. As cdev in that case contains IS_ERR() pseudo "pointer", clean
that up inside the probe function so the remove side doesn't need to
suddenly make an odd looking IS_ERR() check.
The thermal side state 0 means no throttling, i.e., maximum supported PCIe
Link Speed.
Link: https://lore.kernel.org/r/20241018144755.7875-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: dropped data->cdev test per
https://lore.kernel.org/r/ZzRm1SJTwEMRsAr8@wunner.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # From the cooling device interface perspective
Variables annotated with __free() need to be initialized if the function
can return before they get updated for the first time or the attempt to
free the memory pointed to by them upon function return may crash the
kernel.
Fix this issue in some places in the thermal testing code.
Fixes: f6a034f2df ("thermal: Introduce a debugfs-based testing facility")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12576267.O9o76ZdvQC@rjwysocki.net
Use DEFINE_FREE() to define a __free function for dropping thermal
zone template reference counters and use it along with __free() to
simplify code in some places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4628747.LvFx2qVVIh@rjwysocki.net
[ rjw: Add variable initialization to address compiler warning ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
