Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The check condition should be 'i < bc->onecell_data.num_domains', not
'bc->onecell_data.num_domains' which will make the look never finish
and cause kernel panic.
Also disable runtime to address
"imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!"
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@vger.kernel.org
Message-ID: <20241101101252.1448466-1-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In the single PM domain case there is no need for platform code to specify
the index of the corresponding required OPP in DT, as the index must be
zero. This allows us to assign a required dev for the required OPP from
genpd, while attaching a device to its PM domain.
In this way, we can remove some of the genpd specific code in the OPP core
for the single PM domain case. Although, this cleanup is made from a
subsequent change.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-7-ulf.hansson@linaro.org
Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The MediaTek power domain driver contains a hack that assigns the device
node of the power domain to the struct device of the power domain
controller in order to use the devres regulator API.
Now that there is a proper OF-specific regulator API, and even a devres
version, replace the hack with proper code.
This change is incompatible with incomplete device trees. Instead of
assigning the dummy regulator in cases where the power domain requires
a supply but the device tree does not provide one, the driver will just
error out. This will be seen on the MT8390 EVK, which is missing
supplies for the IMG_VCORE and CAM_VCORE domains. And likely all the
MediaTek EVBs, which have no power domain supplies specified. This is
however the correct behavior. If the power domain's supply is missing,
then it should not work. Relying on other parts of the system to keep
the unattached regulator enabled is likely to break in ways less easier
to understand.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240930044525.2043884-4-wenst@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 9094e53ff5 ("pmdomain: core: Use dev_name() instead of
kobject_get_path() in debugfs") severely shortened the names of devices
in a PM Domain. Now the most common format[1] consists of a 32-bit
unit-address (8 characters), followed by a dot and a node name (20
characters for "air-pollution-sensor" and "interrupt-controller", which
are the longest generic node names documented in the Devicetree
Specification), for a typical maximum of 29 characters.
This offers a good opportunity to reduce the table width of the debug
summary:
- Reduce the device name field width from 50 to 30 characters, which
matches the PM Domain name width,
- Reduce the large inter-column space between the "performance" and
"managed by" columns.
Visual impact:
- The "performance" column now starts at a position that is a
multiple of 16, just like the "status" and "children" columns,
- All of the "/device", "runtime status", and "managed by" columns are
now indented 4 characters more than the columns right above them,
- Everything fits in (one less than) 80 characters again ;-)
[1] Note that some device names (e.g. TI AM335x interconnect target
modules) do not follow this convention, and may be much longer, but
these didn't fit in the old 50-character column width either.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f8e1821364b6d5d11350447c128f6d2b470f33fe.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The removed code was added to handle the case where the power domain is
already on during the driver's probing. In this use case, the "is_off"
parameter is passed as false to pm_genpd_init() to inform it not to call
the power_on() callback, as it's unnecessary to perform the hardware
power-on procedure since the power domain is already on. Therefore, with
the call to clk_bulk_prepare_enable() by probe(), the system is in the
same operational state as when "is_off" is passed as true after the
power_on() callback execution:
probe() -> is_off == true -> clk_bulk_prepare_enable() called by power_on()
probe() -> is_off == false -> clk_bulk_prepare_enable() called by probe()
Reaching the same logical and operational state, it follows that upon
driver removal, there is no need to perform different actions depending
on the power domain's on/off state during probing.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240825143428.556439-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
for_each_available_child_of_node() can help to iterate through the
device_node, and we don't need to use while loop. Besides, the purpose
of the while loop is to find a device_node which fits the condition
"child_req_np == ref_np", we can just read the property of "child_np"
directly in for_each_available_child_of_node(). No functional change
with such conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240821034022.27394-2-zhangzekun11@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.11-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.12.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With "quiet" set in bootargs, there is power domain failure:
"imx93_power_domain 44462400.power-domain: pd_off timeout: name:
44462400.power-domain, stat: 4"
The current power on opertation takes ISO state as power on finished
flag, but it is wrong. Before powering on operation really finishes,
powering off comes and powering off will never finish because the last
powering on still not finishes, so the following powering off actually
not trigger hardware state machine to run. SSAR is the last step when
powering on a domain, so need to wait SSAR done when powering on.
Since EdgeLock Enclave(ELE) handshake is involved in the flow, enlarge
the waiting time to 10ms for both on and off to avoid timeout.
Cc: stable@vger.kernel.org
Fixes: 0a0f7cc25d ("soc: imx: add i.MX93 SRC power domain driver")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240814124740.2778952-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Raspberry Pi power driver heavily relies on the logging of the
underlying firmware driver. This results in disadvantages like unspecific
error messages or limited debugging options. So implement the logging for
the most important function rpi_firmware_set_power.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240728114200.75559-5-wahrenst@gmx.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.11-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.12.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Using kobject_get_path() means a dynamic memory allocation gets done, which
doesn't work on a PREEMPT_RT based configuration while holding genpd's raw
spinlock.
To fix the problem, let's convert into using the simpler dev_name(). This
means the information about the path doesn't get presented in debugfs, but
hopefully this shouldn't be an issue.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-4-ulf.hansson@linaro.org
