Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
tegra264_mc_icc_aggregate() does nothing on top of icc_std_aggregate
except an early return on !mc->bwmgr_mrq_supported.
tegra264_mc_icc_set() already returns early on the same condition,
before reading any of the aggregated avg_bw / peak_bw values. This
makes the early return in aggregate() redundant. So, set
tegra264_mc_icc_ops.aggregate to icc_std_aggregate and drop the
helper.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260527140127.49172-3-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
tegra186_emc_interconnect_init() copies the MC's ICC aggregate hook
into the EMC provider. That hook (tegra234_mc_icc_aggregate /
tegra264_mc_icc_aggregate) uses container_of() to recover 'mc',
which is only valid when the icc_provider is embedded in struct
tegra_mc. For an EMC node the provider is embedded in struct
tegra186_emc, so 'mc' points into unrelated memory.
This stayed harmless until commit faafd6ca7e ("memory: tegra:
make icc_set_bw return zero if BWMGR not supported") added an
unconditional read of mc->bwmgr_mrq_supported at the top of the
hook. UBSAN catches the stray load on every EMC aggregation:
UBSAN: invalid-load in drivers/memory/tegra/tegra234.c:1104:9
load of value 112 is not a valid value for type '_Bool'
No functional impact in practice, since the hook's only other mc
dereference (mc->num_channels) sits inside a
TEGRA_ICC_MC_CPU_CLUSTER* branch that EMC nodes never enter.
Fix this by setting the EMC provider's aggregate hook to
icc_std_aggregate, instead of borrowing the MC's hook. The MC
providers continue using their own aggregate hooks, where
container_of() correctly resolves to struct tegra_mc.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 9a38cb2766 ("memory: tegra: Add interconnect support for DRAM scaling in Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260527140127.49172-2-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
To clarify that the function operates on child nodes, rename:
devm_thermal_of_cooling_device_register()
|
v
devm_thermal_of_child_cooling_device_register()
Used the command:
find . -type f -name '*.[ch]' -exec \
sed -i 's/devm_thermal_of_cooling_device_register/\
devm_thermal_of_child_cooling_device_register/g' {} \;
Did not used clang-format-diff because it does not indent correctly
and checkpatch complained. Manually reindented to make checkpatch
happy
This prepares for upcoming support of cooling devices identified by
an ID rather than device tree child nodes.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-18-daniel.lezcano@oss.qualcomm.com
Extend the tegra264_mc_clients table to cover the full set of memory
clients exposed by the SoC. The client name is used for MC fault
reporting. Clients managed by the BPMP bandwidth manager additionally
carry their bpmp_id and type.
Entries in tegra264_mc_clients[] are sorted to match the order of
the override and security register offsets used in previous SoCs.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://patch.msgid.link/20260518124306.2071481-4-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
On platforms with multiple xSPI instances, the driver fails to probe
additional instances due to duplicate sysfs entries:
[ 86.878242] sysfs: cannot create duplicate filename '/bus/platform/devices/rpc-if-spi'
This occurs because platform_device_alloc() uses pdev->id for the device
ID, which may be PLATFORM_DEVID_NONE (-1) for multiple instances, causing
all instances to attempt registration with the same name.
Fix this by using PLATFORM_DEVID_AUTO instead, which automatically assigns
unique IDs to each device instance, allowing multiple xSPI controllers to
coexist without naming conflicts.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260515115202.1515577-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add Memory Controller driver support for Tegra238 SOC, including:
- MC client definitions with Tegra238-specific stream IDs
- Reuse of Tegra234 ICC operations for bandwidth management via BPMP-FW
- Device tree compatible string "nvidia,tegra238-mc"
Export tegra234_mc_icc_ops so it can be shared with the Tegra238 MC
driver, as both SoCs use the same ICC aggregation and bandwidth
management logic.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260427073419.567360-3-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The MC interrupt mask registers lose their state across Tegra low power
suspend state (aka. SC7). Without re-applying them on resume, MC
interrupts that were enabled at probe remain masked after wake, so any
post-resume MC error goes unreported.
Factor the existing intmask programming out of tegra_mc_probe() into
tegra_mc_setup_intmask() and reuse it from the system resume callback
so the mask state is restored on wake.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260430095202.1167651-4-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The tegra-mc platform driver does not register any dev_pm_ops, so the
SoC-specific ->resume() is never invoked (e.g. tegra186_mc_resume) on
system wake. On Tegra186 and later this means MC client Stream-ID
override registers are not reprogrammed, and clients behind the ARM
SMMU fault on the first DMA after resume.
Register a dev_pm_ops on the tegra-mc driver and route the system
resume callback into mc->soc->ops->resume() so the existing SID
restore path runs again on wake.
No suspend callback is needed as the resume path reprograms all MC
state from the static SoC tables, so there is nothing to save.
Fixes: fe3b082a6e ("memory: tegra: Add SID override programming for MC clients")
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260430095202.1167651-3-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
tegra186_mc_resume() is the only implementation of the SoC ->resume()
op in struct tegra_mc_ops, and it can never fail as the SID override
loop has no error path. The int return value is therefore not used.
Change the prototype to return void so callers do not need to deal
with a value that is always 0. If a future SoC needs to report
failure from resume, an int return type can be reintroduced then.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260430095202.1167651-2-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
As is, the EMC drivers for each 32-bit platform contain almost
identical duplicated code for aggregating rate requests. Move this
code out to a shared tegra-emc-common file to reduce duplication,
and add kerneldoc comments.
Based on code from the tegra20-emc driver.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260501-memory-refactor-v3-1-69fb1ae1a7ca@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
After removing of_platform_default_populate() calls the atmel-ebi driver
was affected by deferred probing. platform_driver_probe() is
incompatible with deferred probing. This led to atmel-ebi driver
eventually not being probed on at91 sam9x60-curiosity and other sam9x60
based boards. Subsequently the nand-controller driver (nand-controller
being a child node of ebi) on that platform was not probed and thus raw
NAND flash was inaccessible, preventing devices to boot with rootfs on
raw NAND flash (e.g. with UBI/UBIFS).
Fixes: 0b0f7e6539 ("ARM: at91: remove unnecessary of_platform_default_populate calls")
Cc: stable@vger.kernel.org
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20260429125930.844790-1-ada@thorsis.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
Move init function from OF_DECLARE() argument to the given reserved
memory region ops structure and then pass that structure to the
OF_DECLARE() initializer. This node_init callback is mandatory for the
reserved mem driver. Such change makes it possible in the future to add
more functions called by the generic code before given memory region is
initialized and rmem object is created.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260325090023.3175348-4-m.szyprowski@samsung.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In Tegra264, different components from memory subsystems like Memory
Controller Fabric (MCF), HUB, HUB Common (HUBC), Side Band Shim (SBS)
and channels have different interrupt lines for receiving memory
controller error interrupts.
Add support for logging memory controller errors reported by these
memory subsystems on Tegra264 by:
- Renaming tegra_mc_error_names array to tegra20_mc_error_names
because it has a different bit index for error names compared to
Tegra264.
- Defining the intmask registers and mask values supported for
Tegra264.
- Registering interrupt handlers for interrupts associated with these
different MC components which read the interrupt status registers to
determine the type of violation that occurred.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-7-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a new structure for the intmask register e.g. MC_INTMASK_0 and
it's mask value. Add an array of these new structures to prepare for
supporting multiple intmask registers. This is done in preparation for
adding support for Tegra264 which supports multiple intmask registers.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-6-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Introduce new SoC specific fields in tegra_mc_soc struct for high
address mask and error status type mask because Tegra264 has different
values for these than the existing devices. Error status registers
e.g. MC_ERR_STATUS_0 has few bits which indicate the type of the
error. In order to obtain such type of error from error status
register, we use error status type mask. Similarly, these error status
registers have bits which indicate the higher address bits of the
address responsible for mc error. In order to obtain such higher
address, we use high address mask. Make this change to prepare for
adding MC interrupt support for Tegra264.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-5-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The DBB clock is needed by many IP blocks in order to access system
memory via the data backbone. The memory controller and external memory
controllers are the central place where these accesses are managed, so
make sure that the clock can be controlled from the corresponding
driver.
Note that not all drivers fully register bandwidth requests, and hence
the EMC driver doesn't have enough information to know when it's safe to
switch the clock off, so for now it will be kept on permanently.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260116123732.140813-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
Commit a52ddb98a6 ("memory: tegra186-emc: Simplify and handle deferred
probe with dev_err_probe()") accidently dropped a call to 'put_bpmp' to
release a handle to the BPMP when getting the EMC clock fails. Fix this
by restoring the 'goto put_bpmp' if devm_clk_get() fails.
Fixes: a52ddb98a6 ("memory: tegra186-emc: Simplify and handle deferred probe with dev_err_probe()")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251106190550.1776974-1-jonathanh@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Replace "tegra_emc" with "tegra30_emc" in all functions to:
1. Avoid name clashing with other Tegra EMC drivers which makes it
easier to jump to function definitions,
2. Decode the calltraces a bit easier,
3. Unify with other Tegra MC and EMC drivers, which use the SoC model
prefixes.
No functional impact.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Replace "tegra_emc" with "tegra20_emc" in all functions to:
1. Avoid name clashing with other Tegra EMC drivers which makes it
easier to jump to function definitions,
2. Decode the calltraces a bit easier,
3. Unify with other Tegra MC and EMC drivers, which use the SoC model
prefixes.
No functional impact.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
