Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
Pull hardening fixes from Kees Cook:
"Notably, this contains the fix for for the GCC __init mess I created
with the kstack_erase annotations.
- staging: media: atomisp: Fix stack buffer overflow in
gmin_get_var_int().
I was asked to carry this fix, so here it is. :)
- fortify: Fix incorrect reporting of read buffer size
- kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
- compiler_types: Provide __no_kstack_erase to disable coverage only
on Clang"
* tag 'hardening-v6.17-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
compiler_types: Provide __no_kstack_erase to disable coverage only on Clang
fortify: Fix incorrect reporting of read buffer size
kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
Pull s390 updates from Alexander Gordeev:
- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data
- Print additional unrecoverable machine check information to make the
root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens
- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...
Certain targets disable kstack_erase by filtering out KSTACK_ERASE_CFLAGS
rather than adding DISABLE_KSTACK_ERASE. The renaming to kstack_erase
missed the CFLAGS export, which broke those build targets (e.g. x86
vdso32).
Fixes: 76261fc7d1 ("stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS")
Signed-off-by: Kees Cook <kees@kernel.org>
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Pull crypto library test updates from Eric Biggers:
"Add KUnit test suites for the Poly1305, SHA-1, SHA-224, SHA-256,
SHA-384, and SHA-512 library functions.
These are the first KUnit tests for lib/crypto/. So in addition to
being useful tests for these specific algorithms, they also establish
some conventions for lib/crypto/ testing going forwards.
The new tests are fairly comprehensive: more comprehensive than the
generic crypto infrastructure's tests. They use a variety of
techniques to check for the types of implementation bugs that tend to
occur in the real world, rather than just naively checking some test
vectors. (Interestingly, poly1305_kunit found a bug in QEMU)
The core test logic is shared by all six algorithms, rather than being
duplicated for each algorithm.
Each algorithm's test suite also optionally includes a benchmark"
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Annotate worker to be on stack
lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1
lib/crypto: tests: Add KUnit tests for Poly1305
lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512
lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256
lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
Pull fileattr updates from Christian Brauner:
"This introduces the new file_getattr() and file_setattr() system calls
after lengthy discussions.
Both system calls serve as successors and extensible companions to
the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
started to show their age in addition to being named in a way that
makes it easy to conflate them with extended attribute related
operations.
These syscalls allow userspace to set filesystem inode attributes on
special files. One of the usage examples is the XFS quota projects.
XFS has project quotas which could be attached to a directory. All new
inodes in these directories inherit project ID set on parent
directory.
The project is created from userspace by opening and calling
FS_IOC_FSSETXATTR on each inode. This is not possible for special
files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
with empty project ID. Those inodes then are not shown in the quota
accounting but still exist in the directory. This is not critical but
in the case when special files are created in the directory with
already existing project quota, these new inodes inherit extended
attributes. This creates a mix of special files with and without
attributes. Moreover, special files with attributes don't have a
possibility to become clear or change the attributes. This, in turn,
prevents userspace from re-creating quota project on these existing
files.
In addition, these new system calls allow the implementation of
additional attributes that we couldn't or didn't want to fit into the
legacy ioctls anymore"
* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: tighten a sanity check in file_attr_to_fileattr()
tree-wide: s/struct fileattr/struct file_kattr/g
fs: introduce file_getattr and file_setattr syscalls
fs: prepare for extending file_get/setattr()
fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
selinux: implement inode_file_[g|s]etattr hooks
lsm: introduce new hooks for setting/getting inode fsxattr
fs: split fileattr related helpers into separate file
Adjust the sysctl table detection to include the macro pattern used for
the ucount ctl_tables. This prevents falsly assigning them as
non-documented ctl_tables
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Use a skiplist to "skip" the titles in the guide documentation
(Documentation/admin-guide/sysctl/*) that are not sysctls. This will
give a more accurate account of what sysctl are miss-documented.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Use "#!/usr/bin/env -S gawk -f" instead of "#!/bin/gawk". Needed for
testing in nix environments as they only provide /usr/bin/env at the
standard location.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
The Clang stack depth tracking implementation has a fixed name for
the stack depth tracking callback, "__sanitizer_cov_stack_depth", so
rename the GCC plugin function to match since the plugin has no external
dependencies on naming.
Link: https://lore.kernel.org/r/20250717232519.2984886-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix build and modpost confusion for the upcoming Rust 1.89.0
release
- Clean objtool warning for the upcoming Rust 1.89.0 release by
adding one more noreturn function
'kernel' crate:
- Fix build error when using generics in the 'try_{,pin_}init!'
macros"
* tag 'rust-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: use `#[used(compiler)]` to fix build and `modpost` with Rust >= 1.89.0
objtool/rust: add one more `noreturn` Rust function for Rust 1.89.0
rust: init: Fix generics in *_init! macros
Starting with Rust 1.89.0 (expected 2025-08-07), the Rust compiler fails
to build the `rusttest` target due to undefined references such as:
kernel...-cgu.0:(.text....+0x116): undefined reference to
`rust_helper_kunit_get_current_test'
Moreover, tooling like `modpost` gets confused:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/nova/nova.o
ERROR: modpost: missing MODULE_LICENSE() in drivers/gpu/nova-core/nova_core.o
The reason behind both issues is that the Rust compiler will now [1]
treat `#[used]` as `#[used(linker)]` instead of `#[used(compiler)]`
for our targets. This means that the retain section flag (`R`,
`SHF_GNU_RETAIN`) will be used and that they will be marked as `unique`
too, with different IDs. In turn, that means we end up with undefined
references that did not get discarded in `rusttest` and that multiple
`.modinfo` sections are generated, which confuse tooling like `modpost`
because they only expect one.
Thus start using `#[used(compiler)]` to keep the previous behavior
and to be explicit about what we want. Sadly, it is an unstable feature
(`used_with_arg`) [2] -- we will talk to upstream Rust about it. The good
news is that it has been available for a long time (Rust >= 1.60) [3].
The changes should also be fine for previous Rust versions, since they
behave the same way as before [4].
Alternatively, we could use `#[no_mangle]` or `#[export_name = ...]`
since those still behave like `#[used(compiler)]`, but of course it is
not really what we want to express, and it requires other changes to
avoid symbol conflicts.
Cc: David Wood <david@davidtw.co>
Cc: Wesley Wiser <wwiser@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/140872 [1]
Link: https://github.com/rust-lang/rust/issues/93798 [2]
Link: https://github.com/rust-lang/rust/pull/91504 [3]
Link: https://godbolt.org/z/sxzWTMfzW [4]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20250712160103.1244945-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a KUnit test suite for the Poly1305 functions. Most of its test
cases are instantiated from hash-test-template.h, which is also used by
the SHA-2 tests. A couple additional test cases are also included to
test edge cases specific to Poly1305.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add hash-test-template.h which generates the following KUnit test cases
for hash functions:
test_hash_test_vectors
test_hash_all_lens_up_to_4096
test_hash_incremental_updates
test_hash_buffer_overruns
test_hash_overlaps
test_hash_alignment_consistency
test_hash_ctx_zeroization
test_hash_interrupt_context_1
test_hash_interrupt_context_2
test_hmac (when HMAC is supported)
benchmark_hash (when CONFIG_CRYPTO_LIB_BENCHMARK=y)
The initial use cases for this will be sha224_kunit, sha256_kunit,
sha384_kunit, sha512_kunit, and poly1305_kunit.
Add a Python script gen-hash-testvecs.py which generates the test
vectors required by test_hash_test_vectors,
test_hash_all_lens_up_to_4096, and test_hmac.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Paolo Abeni says:
====================
virtio: introduce GSO over UDP tunnel
Some virtualized deployments use UDP tunnel pervasively and are impacted
negatively by the lack of GSO support for such kind of traffic in the
virtual NIC driver.
The virtio_net specification recently introduced support for GSO over
UDP tunnel, this series updates the virtio implementation to support
such a feature.
Currently the kernel virtio support limits the feature space to 64,
while the virtio specification allows for a larger number of features.
Specifically the GSO-over-UDP-tunnel-related virtio features use bits
65-69.
The first four patches in this series rework the virtio and vhost
feature support to cope with up to 128 bits. The limit is set by
a define and could be easily raised in future, as needed.
This implementation choice is aimed at keeping the code churn as
limited as possible. For the same reason, only the virtio_net driver is
reworked to leverage the extended feature space; all other
virtio/vhost drivers are unaffected, but could be upgraded to support
the extended features space in a later time.
The last four patches bring in the actual GSO over UDP tunnel support.
As per specification, some additional fields are introduced into the
virtio net header to support the new offload. The presence of such
fields depends on the negotiated features.
New helpers are introduced to convert the UDP-tunneled skb metadata to
an extended virtio net header and vice versa. Such helpers are used by
the tun and virtio_net driver to cope with the newly supported offloads.
Tested with basic stream transfer with all the possible permutations of
host kernel/qemu/guest kernel with/without GSO over UDP tunnel support.
====================
Link: https://patch.msgid.link/cover.1751874094.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When one starts QEMU with the -S flag and attaches GDB, the kernel is
not yet loaded, and the current instruction is an entry point to the
decompressor. In case the intention is to debug the early kernel boot,
and not the decompressor, e.g., put a breakpoint on some kernel
function and see all the invocations, one has to skip the decompressor.
There are many ways to do this, and so far people wrote private scripts
or memorized certain command sequences.
Make it work out of the box like this:
$ gdb -ex 'target remote :6812' -ex 'source vmlinux-gdb.py' vmlinux
Remote debugging using :6812
0x0000000000010000 in ?? ()
(gdb) lx-symbols
loading vmlinux
(gdb) x/i $pc
=> 0x3ffe0100000 <startup_continue>: lghi %r2,0
Implement this by reading the address of the jump_to_kernel() function
from the lowcore, and step until DAT is turned on.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250625154220.75300-3-iii@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
In commit 721255b982 ("genirq: Use a maple tree for interrupt descriptor
management"), the irq_desc_tree was replaced with a sparse_irqs tree using
a maple tree structure. Since the script looked for the irq_desc_tree
symbol which is no longer available, no interrupts would be printed and
the script output would not be useful anymore.
In addition to looking up the correct symbol (sparse_irqs), a new module
(mapletree.py) is added whose mtree_load() implementation is largely
copied after the C version and uses the same variable and intermediate
function names wherever possible to ensure that both the C and Python
version be updated in the future.
This restores the scripts' output to match that of /proc/interrupts.
Link: https://lkml.kernel.org/r/20250625021020.1056930-1-florian.fainelli@broadcom.com
Fixes: 721255b982 ("genirq: Use a maple tree for interrupt descriptor management")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mentioned macro introduce by the next patch will foul kdoc;
fully expand the mentioned macro to avoid the issue.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Historically, the RGMII PHY modes specified in Device Trees have been
used inconsistently, often referring to the usage of delays on the PHY
side rather than describing the board; many drivers still implement this
incorrectly.
Require a comment in Devices Trees using these modes (usually mentioning
that the delay is realized on the PCB), so we can avoid adding more
incorrect uses (or will at least notice which drivers still need to be
fixed).
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/bc112b8aa510cf9df9ab33178d122f234d0aebf7.1750756583.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Enumeration constants read from a symbol reference file can incorrectly
affect new enumeration constants parsed from an actual input file.
Example:
$ cat test.c
enum { E_A, E_B, E_MAX };
struct bar { int mem[E_MAX]; };
int foo(struct bar *a) {}
__GENKSYMS_EXPORT_SYMBOL(foo);
$ cat test.c | ./scripts/genksyms/genksyms -T test.0.symtypes
#SYMVER foo 0x070d854d
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb8250 ("genksyms: Track changes to enum constants")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
Another issue with <linux/export.h> is that it is sometimes included
even when EXPORT_SYMBOL() is not used at all.
Some headers (e.g. include/linux/linkage.h>) cannot be fixed for now
for the reason described in the previous commit.
This commit adds a warning for *.c files that include <linux/export.h>
but do not use EXPORT_SYMBOL() when the kernel is built with W=1.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The problem was described in commit 5b20755b77 ("init: move THIS_MODULE
from <linux/export.h> to <linux/init.h>").
To summarize it again here: <linux/export.h> is included by most C files,
even though only some of them actually export symbols. This is because
some headers, such as include/linux/{module.h,linkage}, needlessly
include <linux/export.h>.
I have added a more detailed explanation in the comments of
scripts/misc-check.
This problem will be fixed in two steps:
1. Add #include <linux/export.h> directly to C files that use
EXPORT_SYMBOL()
2. Remove #include <linux/export.h> from header files that do not use
EXPORT_SYMBOL()
This commit addresses step 1; scripts/misc-check will warn about *.[ch]
files that use EXPORT_SYMBOL() but do not include <linux/export.h>.
This check is only triggered when the kernel is built with W=1.
We need to fix 4000+ files. I hope others will help with this effort.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This script is executed only when ${KBUILD_EXTRA_WARN} contains 1.
Move this check to the top-level Makefile to allow more checks to be
easily added to this script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Some ctags implementations are available. With this change, You can
specify your favorite one with CTAGS environment variable.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, menu->prompt->type is checked to distinguish "comment"
(P_COMMENT) and "menu" (P_MENU) entries from regular "config" entries.
This is odd because P_COMMENT and P_MENU are not properties.
This commit introduces menu type enum to distinguish menu types more
naturally.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
Pull hardening fixes from Kees Cook:
- randstruct: gcc-plugin: Fix attribute addition with GCC 15
- ubsan: integer-overflow: depend on BROKEN to keep this out of CI
- overflow: Introduce __DEFINE_FLEX for having no initializer
- wifi: iwlwifi: mld: Work around Clang loop unrolling bug
[ Take two after a jump scare due to some repo rewriting by 'b4' - Linus ]
* tag 'hardening-v6.16-rc1-fix1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: gcc-plugin: Fix attribute addition
overflow: Introduce __DEFINE_FLEX for having no initializer
ubsan: integer-overflow: depend on BROKEN to keep this out of CI
wifi: iwlwifi: mld: Work around Clang loop unrolling bug
