Currently, if user-supplied log buffer to collect BPF verifier log turns
out to be too small to contain full log, bpf() syscall returns -ENOSPC,
fails BPF program verification/load, and preserves first N-1 bytes of
the verifier log (where N is the size of user-supplied buffer).
This is problematic in a bunch of common scenarios, especially when
working with real-world BPF programs that tend to be pretty complex as
far as verification goes and require big log buffers. Typically, it's
when debugging tricky cases at log level 2 (verbose). Also, when BPF program
is successfully validated, log level 2 is the only way to actually see
verifier state progression and all the important details.
Even with log level 1, it's possible to get -ENOSPC even if the final
verifier log fits in log buffer, if there is a code path that's deep
enough to fill up entire log, even if normally it would be reset later
on (there is a logic to chop off successfully validated portions of BPF
verifier log).
In short, it's not always possible to pre-size log buffer. Also, what's
worse, in practice, the end of the log most often is way more important
than the beginning, but verifier stops emitting log as soon as initial
log buffer is filled up.
This patch switches BPF verifier log behavior to effectively behave as
rotating log. That is, if user-supplied log buffer turns out to be too
short, verifier will keep overwriting previously written log,
effectively treating user's log buffer as a ring buffer. -ENOSPC is
still going to be returned at the end, to notify user that log contents
was truncated, but the important last N bytes of the log would be
returned, which might be all that user really needs. This consistent
-ENOSPC behavior, regardless of rotating or fixed log behavior, allows
to prevent backwards compatibility breakage. The only user-visible
change is which portion of verifier log user ends up seeing *if buffer
is too small*. Given contents of verifier log itself is not an ABI,
there is no breakage due to this behavior change. Specialized tools that
rely on specific contents of verifier log in -ENOSPC scenario are
expected to be easily adapted to accommodate old and new behaviors.
Importantly, though, to preserve good user experience and not require
every user-space application to adopt to this new behavior, before
exiting to user-space verifier will rotate log (in place) to make it
start at the very beginning of user buffer as a continuous
zero-terminated string. The contents will be a chopped off N-1 last
bytes of full verifier log, of course.
Given beginning of log is sometimes important as well, we add
BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows
tools like veristat to request first part of verifier log, if necessary.
BPF_LOG_FIXED flag is also a simple and straightforward way to check if
BPF verifier supports rotating behavior.
On the implementation side, conceptually, it's all simple. We maintain
64-bit logical start and end positions. If we need to truncate the log,
start position will be adjusted accordingly to lag end position by
N bytes. We then use those logical positions to calculate their matching
actual positions in user buffer and handle wrap around the end of the
buffer properly. Finally, right before returning from bpf_check(), we
rotate user log buffer contents in-place as necessary, to make log
contents contiguous. See comments in relevant functions for details.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
kernel/bpf/verifier.c file is large and growing larger all the time. So
it's good to start splitting off more or less self-contained parts into
separate files to keep source code size (somewhat) somewhat under
control.
This patch is a one step in this direction, moving some of BPF verifier log
routines into a separate kernel/bpf/log.c. Right now it's most low-level
and isolated routines to append data to log, reset log to previous
position, etc. Eventually we could probably move verifier state
printing logic here as well, but this patch doesn't attempt to do that
yet.
Subsequent patches will add more logic to verifier log management, so
having basics in a separate file will make sure verifier.c doesn't grow
more with new changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
btf_nested_type_is_trusted() tries to find a struct member at corresponding offset.
It works for flat structures and falls apart in more complex structs with nested structs.
The offset->member search is already performed by btf_struct_walk() including nested structs.
Reuse this work and pass {field name, field btf id} into btf_nested_type_is_trusted()
instead of offset to make BTF_TYPE_SAFE*() logic more robust.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-4-alexei.starovoitov@gmail.com
This patch uses bpf_mem_cache_alloc/free for allocating and freeing
bpf_local_storage for task and cgroup storage.
The changes are similar to the previous patch. A few things that
worth to mention for bpf_local_storage:
The local_storage is freed when the last selem is deleted.
Before deleting a selem from local_storage, it needs to retrieve the
local_storage->smap because the bpf_selem_unlink_storage_nolock()
may have set it to NULL. Note that local_storage->smap may have
already been NULL when the selem created this local_storage has
been removed. In this case, call_rcu will be used to free the
local_storage.
Also, the bpf_ma (true or false) value is needed before calling
bpf_local_storage_free(). The bpf_ma can either be obtained from
the local_storage->smap (if available) or any of its selem's smap.
A new helper check_storage_bpf_ma() is added to obtain
bpf_ma for a deleting bpf_local_storage.
When bpf_local_storage_alloc getting a reused memory, all
fields are either in the correct values or will be initialized.
'cache[]' must already be all NULLs. 'list' must be empty.
Others will be initialized.
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230322215246.1675516-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch uses bpf_mem_alloc for the task and cgroup local storage that
the bpf prog can easily get a hold of the storage owner's PTR_TO_BTF_ID.
eg. bpf_get_current_task_btf() can be used in some of the kmalloc code
path which will cause deadlock/recursion. bpf_mem_cache_alloc is
deadlock free and will solve a legit use case in [1].
For sk storage, its batch creation benchmark shows a few percent
regression when the sk create/destroy batch size is larger than 32.
The sk creation/destruction happens much more often and
depends on external traffic. Considering it is hypothetical
to be able to cause deadlock with sk storage, it can cross
the bridge to use bpf_mem_alloc till a legit (ie. useful)
use case comes up.
For inode storage, bpf_local_storage_destroy() is called before
waiting for a rcu gp and its memory cannot be reused immediately.
inode stays with kmalloc/kfree after the rcu [or tasks_trace] gp.
A 'bool bpf_ma' argument is added to bpf_local_storage_map_alloc().
Only task and cgroup storage have 'bpf_ma == true' which
means to use bpf_mem_cache_alloc/free(). This patch only changes
selem to use bpf_mem_alloc for task and cgroup. The next patch
will change the local_storage to use bpf_mem_alloc also for
task and cgroup.
Here is some more details on the changes:
* memory allocation:
After bpf_mem_cache_alloc(), the SDATA(selem)->data is zero-ed because
bpf_mem_cache_alloc() could return a reused selem. It is to keep
the existing bpf_map_kzalloc() behavior. Only SDATA(selem)->data
is zero-ed. SDATA(selem)->data is the visible part to the bpf prog.
No need to use zero_map_value() to do the zeroing because
bpf_selem_free(..., reuse_now = true) ensures no bpf prog is using
the selem before returning the selem through bpf_mem_cache_free().
For the internal fields of selem, they will be initialized when
linking to the new smap and the new local_storage.
When 'bpf_ma == false', nothing changes in this patch. It will
stay with the bpf_map_kzalloc().
* memory free:
The bpf_selem_free() and bpf_selem_free_rcu() are modified to handle
the bpf_ma == true case.
For the common selem free path where its owner is also being destroyed,
the mem is freed in bpf_local_storage_destroy(), the owner (task
and cgroup) has gone through a rcu gp. The memory can be reused
immediately, so bpf_local_storage_destroy() will call
bpf_selem_free(..., reuse_now = true) which will do
bpf_mem_cache_free() for immediate reuse consideration.
An exception is the delete elem code path. The delete elem code path
is called from the helper bpf_*_storage_delete() and the syscall
bpf_map_delete_elem(). This path is an unusual case for local
storage because the common use case is to have the local storage
staying with its owner life time so that the bpf prog and the user
space does not have to monitor the owner's destruction. For the delete
elem path, the selem cannot be reused immediately because there could
be bpf prog using it. It will call bpf_selem_free(..., reuse_now = false)
and it will wait for a rcu tasks trace gp before freeing the elem. The
rcu callback is changed to do bpf_mem_cache_raw_free() instead of kfree().
When 'bpf_ma == false', it should be the same as before.
__bpf_selem_free() is added to do the kfree_rcu and call_tasks_trace_rcu().
A few words on the 'reuse_now == true'. When 'reuse_now == true',
it is still racing with bpf_local_storage_map_free which is under rcu
protection, so it still needs to wait for a rcu gp instead of kfree().
Otherwise, the selem may be reused by slab for a totally different struct
while the bpf_local_storage_map_free() is still using it (as a
rcu reader). For the inode case, there may be other rcu readers also.
In short, when bpf_ma == false and reuse_now == true => vanilla rcu.
[1]: https://lore.kernel.org/bpf/20221118190109.1512674-1-namhyung@kernel.org/
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230322215246.1675516-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a few bpf mem allocator functions which will
be used in the bpf_local_storage in a later patch.
bpf_mem_cache_alloc_flags(..., gfp_t flags) is added. When the
flags == GFP_KERNEL, it will fallback to __alloc(..., GFP_KERNEL).
bpf_local_storage knows its running context is sleepable (GFP_KERNEL)
and provides a better guarantee on memory allocation.
bpf_local_storage has some uncommon cases that its selem
cannot be reused immediately. It handles its own
rcu_head and goes through a rcu_trace gp and then free it.
bpf_mem_cache_raw_free() is added for direct free purpose
without leaking the LLIST_NODE_SZ internal knowledge.
During free time, the 'struct bpf_mem_alloc *ma' is no longer
available. However, the caller should know if it is
percpu memory or not and it can call different raw_free functions.
bpf_local_storage does not support percpu value, so only
the non-percpu 'bpf_mem_cache_raw_free()' is added in
this patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230322215246.1675516-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By improving the BPF_LINK_UPDATE command of bpf(), it should allow you
to conveniently switch between different struct_ops on a single
bpf_link. This would enable smoother transitions from one struct_ops
to another.
The struct_ops maps passing along with BPF_LINK_UPDATE should have the
BPF_F_LINK flag.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230323032405.3735486-6-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Make bpf_link support struct_ops. Previously, struct_ops were always
used alone without any associated links. Upon updating its value, a
struct_ops would be activated automatically. Yet other BPF program
types required to make a bpf_link with their instances before they
could become active. Now, however, you can create an inactive
struct_ops, and create a link to activate it later.
With bpf_links, struct_ops has a behavior similar to other BPF program
types. You can pin/unpin them from their links and the struct_ops will
be deactivated when its link is removed while previously need someone
to delete the value for it to be deactivated.
bpf_links are responsible for registering their associated
struct_ops. You can only use a struct_ops that has the BPF_F_LINK flag
set to create a bpf_link, while a structs without this flag behaves in
the same manner as before and is registered upon updating its value.
The BPF_LINK_TYPE_STRUCT_OPS serves a dual purpose. Not only is it
used to craft the links for BPF struct_ops programs, but also to
create links for BPF struct_ops them-self. Since the links of BPF
struct_ops programs are only used to create trampolines internally,
they are never seen in other contexts. Thus, they can be reused for
struct_ops themself.
To maintain a reference to the map supporting this link, we add
bpf_struct_ops_link as an additional type. The pointer of the map is
RCU and won't be necessary until later in the patchset.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-4-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This feature lets you immediately transition to another congestion
control algorithm or implementation with the same name. Once a name
is updated, new connections will apply this new algorithm.
The purpose is to update a customized algorithm implemented in BPF
struct_ops with a new version on the flight. The following is an
example of using the userspace API implemented in later BPF patches.
link = bpf_map__attach_struct_ops(skel->maps.ca_update_1);
.......
err = bpf_link__update_map(link, skel->maps.ca_update_2);
We first load and register an algorithm implemented in BPF struct_ops,
then swap it out with a new one using the same name. After that, newly
created connections will apply the updated algorithm, while older ones
retain the previous version already applied.
This patch also takes this chance to refactor the ca validation into
the new tcp_validate_congestion_control() function.
Cc: netdev@vger.kernel.org, Eric Dumazet <edumazet@google.com>
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-3-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
We have replaced kvalue-refcnt with synchronize_rcu() to wait for an
RCU grace period.
Maintenance of kvalue->refcnt was a complicated task, as we had to
simultaneously keep track of two reference counts: one for the
reference count of bpf_map. When the kvalue->refcnt reaches zero, we
also have to reduce the reference count on bpf_map - yet these steps
are not performed in an atomic manner and require us to be vigilant
when managing them. By eliminating kvalue->refcnt, we can make our
maintenance more straightforward as the refcount of bpf_map is now
solely managed!
To prevent the trampoline image of a struct_ops from being released
while it is still in use, we wait for an RCU grace period. The
setsockopt(TCP_CONGESTION, "...") command allows you to change your
socket's congestion control algorithm and can result in releasing the
old struct_ops implementation. It is fine. However, this function is
exposed through bpf_setsockopt(), it may be accessed by BPF programs
as well. To ensure that the trampoline image belonging to struct_op
can be safely called while its method is in use, the trampoline
safeguarde the BPF program with rcu_read_lock(). Doing so prevents any
destruction of the associated images before returning from a
trampoline and requires us to wait for an RCU grace period.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-2-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch changes the return types of bpf_map_ops functions to long, where
previously int was returned. Using long allows for bpf programs to maintain
the sign bit in the absence of sign extension during situations where
inlined bpf helper funcs make calls to the bpf_map_ops funcs and a negative
error is returned.
The definitions of the helper funcs are generated from comments in the bpf
uapi header at `include/uapi/linux/bpf.h`. The return type of these
helpers was previously changed from int to long in commit bdb7b79b4c. For
any case where one of the map helpers call the bpf_map_ops funcs that are
still returning 32-bit int, a compiler might not include sign extension
instructions to properly convert the 32-bit negative value a 64-bit
negative value.
For example:
bpf assembly excerpt of an inlined helper calling a kernel function and
checking for a specific error:
; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
...
46: call 0xffffffffe103291c ; htab_map_update_elem
; if (err && err != -EEXIST) {
4b: cmp $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax
kernel function assembly excerpt of return value from
`htab_map_update_elem` returning 32-bit int:
movl $0xffffffef, %r9d
...
movl %r9d, %eax
...results in the comparison:
cmp $0xffffffffffffffef, $0x00000000ffffffef
Fixes: bdb7b79b4c ("bpf: Switch most helper return values from 32-bit int to 64-bit long")
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF needs to know the offsets of fields it tries to access.
Zero-length fields are added to make offsetof() work.
This unfortunately partitions the bitfield (fields across
the zero-length members can't be coalesced).
Reorder bytes 2 and 3, BPF needs to know the offset of fields
previously in byte 3 and some fields in byte 2 should really
be optional.
The two bytes are always in the same cacheline so it should
not matter.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-3-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Moving find_kallsyms_symbol_value from kernel/module/internal.h to
include/linux/module.h. The reason is that internal.h is not prepared to
be included when CONFIG_MODULES=n. find_kallsyms_symbol_value is used by
kernel/bpf/verifier.c and including internal.h from it (without modules)
leads into a compilation error:
In file included from ../include/linux/container_of.h:5,
from ../include/linux/list.h:5,
from ../include/linux/timer.h:5,
from ../include/linux/workqueue.h:9,
from ../include/linux/bpf.h:10,
from ../include/linux/bpf-cgroup.h:5,
from ../kernel/bpf/verifier.c:7:
../kernel/bpf/../module/internal.h: In function 'mod_find':
../include/linux/container_of.h:20:54: error: invalid use of undefined type 'struct module'
20 | static_assert(__same_type(*(ptr), ((type *)0)->member) || \
| ^~
[...]
This patch fixes the above error.
Fixes: 31bf1dbccf ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/oe-kbuild-all/202303161404.OrmfCy09-lkp@intel.com/
Link: https://lore.kernel.org/bpf/20230317095601.386738-1-vmalik@redhat.com
This resolves two problems with attachment of fentry/fexit/fmod_ret/lsm
to functions located in modules:
1. The verifier tries to find the address to attach to in kallsyms. This
is always done by searching the entire kallsyms, not respecting the
module in which the function is located. Such approach causes an
incorrect attachment address to be computed if the function to attach
to is shadowed by a function of the same name located earlier in
kallsyms.
2. If the address to attach to is located in a module, the module
reference is only acquired in register_fentry. If the module is
unloaded between the place where the address is found
(bpf_check_attach_target in the verifier) and register_fentry, it is
possible that another module is loaded to the same address which may
lead to potential errors.
Since the attachment must contain the BTF of the program to attach to,
we extract the module from it and search for the function address in the
correct module (resolving problem no. 1). Then, the module reference is
taken directly in bpf_check_attach_target and stored in the bpf program
(in bpf_prog_aux). The reference is only released when the program is
unloaded (resolving problem no. 2).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/3f6a9d8ae850532b5ef864ef16327b0f7a669063.1678432753.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__xdp_build_skb_from_frame() was the last user of
{__,}xdp_release_frame(), which detaches pages from the page_pool.
All the consumers now recycle Page Pool skbs and page, except mlx5,
stmmac and tsnep drivers, which use page_pool_release_page() directly
(might change one day). It's safe to assume this functionality is not
needed anymore and can be removed (in favor of recycling).
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-5-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-2-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a local kptr is stashed in a map and freed when the map goes away,
currently an error like the below appears:
[ 39.195695] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u32:15/2875
[ 39.196549] caller is bpf_mem_free+0x56/0xc0
[ 39.196958] CPU: 15 PID: 2875 Comm: kworker/u32:15 Tainted: G O 6.2.0-13016-g22df776a9a86 #4477
[ 39.197897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 39.198949] Workqueue: events_unbound bpf_map_free_deferred
[ 39.199470] Call Trace:
[ 39.199703] <TASK>
[ 39.199911] dump_stack_lvl+0x60/0x70
[ 39.200267] check_preemption_disabled+0xbf/0xe0
[ 39.200704] bpf_mem_free+0x56/0xc0
[ 39.201032] ? bpf_obj_new_impl+0xa0/0xa0
[ 39.201430] bpf_obj_free_fields+0x1cd/0x200
[ 39.201838] array_map_free+0xad/0x220
[ 39.202193] ? finish_task_switch+0xe5/0x3c0
[ 39.202614] bpf_map_free_deferred+0xea/0x210
[ 39.203006] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.203460] process_one_work+0x64f/0xbe0
[ 39.203822] ? pwq_dec_nr_in_flight+0x110/0x110
[ 39.204264] ? do_raw_spin_lock+0x107/0x1c0
[ 39.204662] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.205107] worker_thread+0x74/0x7a0
[ 39.205451] ? process_one_work+0xbe0/0xbe0
[ 39.205818] kthread+0x171/0x1a0
[ 39.206111] ? kthread_complete_and_exit+0x20/0x20
[ 39.206552] ret_from_fork+0x1f/0x30
[ 39.206886] </TASK>
This happens because the call to __bpf_obj_drop_impl I added in the patch
adding support for stashing local kptrs doesn't disable migration. Prior
to that patch, __bpf_obj_drop_impl logic only ran when called by a BPF
progarm, whereas now it can be called from map free path, so it's
necessary to explicitly disable migration.
Also, refactor a bit to just call __bpf_obj_drop_impl directly instead
of bothering w/ dtor union and setting pointer-to-obj_drop.
Fixes: c8e1875409 ("bpf: Support __kptr to local kptrs")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230313214641.3731908-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In commit 3fbd7ee285 ("tasks: Add a count of task RCU users"), a
count on the number of RCU users was added to struct task_struct. This
was done so as to enable the removal of task_rcu_dereference(), and
allow tasks to be protected by RCU even after exiting and being removed
from the runqueue. In this commit, the 'refcount_t rcu_users' field that
keeps track of this refcount was put into a union co-located with
'struct rcu_head rcu', so as to avoid taking up any extra space in
task_struct. This was possible to do safely, because the field was only
ever decremented by a static set of specific callers, and then never
incremented again.
While this restriction of there only being a small, static set of users
of this field has worked fine, it prevents us from leveraging the field
to use RCU to protect tasks in other contexts.
During tracing, for example, it would be useful to be able to collect
some tasks that performed a certain operation, put them in a map, and
then periodically summarize who they are, which cgroup they're in, how
much CPU time they've utilized, etc. While this can currently be done
with 'usage', it becomes tricky when a task is already in a map, or if a
reference should only be taken if a task is valid and will not soon be
reaped. Ideally, we could do something like pass a reference to a map
value, and then try to acquire a reference to the task in an RCU read
region by using refcount_inc_not_zero().
Similarly, in sched_ext, schedulers are using integer pids to remember
tasks, and then looking them up with find_task_by_pid_ns(). This is
slow, error prone, and adds complexity. It would be more convenient and
performant if BPF schedulers could instead store tasks directly in maps,
and then leverage RCU to ensure they can be safely accessed with low
overhead.
Finally, overloading fields like this is error prone. Someone that wants
to use 'rcu_users' could easily overlook the fact that once the rcu
callback is scheduled, the refcount will go back to being nonzero, thus
precluding the use of refcount_inc_not_zero(). Furthermore, as described
below, it's possible to extract the fields of the union without changing
the size of task_struct.
There are several possible ways to enable this:
1. The lightest touch approach is likely the one proposed in this patch,
which is to simply extract 'rcu_users' and 'rcu' from the union, so
that scheduling the 'rcu' callback doesn't overwrite the 'rcu_users'
refcount. If we have a trusted task pointer, this would allow us to
use refcnt_inc_not_zero() inside of an RCU region to determine if we
can safely acquire a reference to the task and store it in a map. As
mentioned below, this can be done without changing the size of
task_struct, by moving the location of the union to another location
that has padding gaps we can fill in.
2. Removing 'refcount_t rcu_users', and instead having the entire task
be freed in an rcu callback. This is likely the most sound overall
design, though it changes the behavioral semantics exposed to
callers, who currently expect that a task that's successfully looked
up in e.g. the pid_list with find_task_by_pid_ns(), can always have a
'usage' reference acquired on them, as it's guaranteed to be >
0 until after the next gp. In order for this approach to work, we'd
have to audit all callers. This approach also slightly changes
behavior observed by user space by not invoking
trace_sched_process_free() until the whole task_struct is actually being
freed, rather than just after it's exited. It also may change
timings, as memory will be freed in an RCU callback rather than
immediately when the final 'usage' refcount drops to 0. This also is
arguably a benefit, as it provides more predictable performance to
callers who are refcounting tasks.
3. There may be other solutions as well that don't require changing the
layout of task_struct. For example, we could possibly do something
complex from the BPF side, such as listen for task exit and remove a
task from a map when the task is exiting. This would likely require
significant custom handling for task_struct in the verifier, so a
more generalizable solution is likely warranted.
As mentioned above, this patch proposes the lightest-touch approach
which allows callers elsewhere in the kernel to use 'rcu_users' to
ensure the lifetime of a task, by extracting 'rcu_users' and 'rcu' from
the union. There is no size change in task_struct with this patch.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230215233033.889644-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a PTR_TO_BTF_ID type comes from program BTF - not vmlinux or module
BTF - it must have been allocated by bpf_obj_new and therefore must be
free'd with bpf_obj_drop. Such a PTR_TO_BTF_ID is considered a "local
kptr" and is tagged with MEM_ALLOC type tag by bpf_obj_new.
This patch adds support for treating __kptr-tagged pointers to "local
kptrs" as having an implicit bpf_obj_drop destructor for referenced kptr
acquire / release semantics. Consider the following example:
struct node_data {
long key;
long data;
struct bpf_rb_node node;
};
struct map_value {
struct node_data __kptr *node;
};
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__type(key, int);
__type(value, struct map_value);
__uint(max_entries, 1);
} some_nodes SEC(".maps");
If struct node_data had a matching definition in kernel BTF, the verifier would
expect a destructor for the type to be registered. Since struct node_data does
not match any type in kernel BTF, the verifier knows that there is no kfunc
that provides a PTR_TO_BTF_ID to this type, and that such a PTR_TO_BTF_ID can
only come from bpf_obj_new. So instead of searching for a registered dtor,
a bpf_obj_drop dtor can be assumed.
This allows the runtime to properly destruct such kptrs in
bpf_obj_free_fields, which enables maps to clean up map_vals w/ such
kptrs when going away.
Implementation notes:
* "kernel_btf" variable is renamed to "kptr_btf" in btf_parse_kptr.
Before this patch, the variable would only ever point to vmlinux or
module BTFs, but now it can point to some program BTF for local kptr
type. It's later used to populate the (btf, btf_id) pair in kptr btf
field.
* It's necessary to btf_get the program BTF when populating btf_field
for local kptr. btf_record_free later does a btf_put.
* Behavior for non-local referenced kptrs is not modified, as
bpf_find_btf_id helper only searches vmlinux and module BTFs for
matching BTF type. If such a type is found, btf_field_kptr's btf will
pass btf_is_kernel check, and the associated release function is
some one-argument dtor. If btf_is_kernel check fails, associated
release function is two-arg bpf_obj_drop_impl. Before this patch
only btf_field_kptr's w/ kernel or module BTFs were created.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch re-purpose the use_trace_rcu to mean
if the freed memory can be reused immediately or not.
The use_trace_rcu is renamed to reuse_now. Other than
the boolean test is reversed, it should be a no-op.
The following explains the reason for the rename and how it will
be used in a later patch.
In a later patch, bpf_mem_cache_alloc/free will be used
in the bpf_local_storage. The bpf mem allocator will reuse
the freed memory immediately. Some of the free paths in
bpf_local_storage does not support memory to be reused immediately.
These paths are the "delete" elem cases from the bpf_*_storage_delete()
helper and the map_delete_elem() syscall. Note that "delete" elem
before the owner's (sk/task/cgrp/inode) lifetime ended is not
the common usage for the local storage.
The common free path, bpf_local_storage_destroy(), can reuse the
memory immediately. This common path means the storage stays with
its owner until the owner is destroyed.
The above mentioned "delete" elem paths that cannot
reuse immediately always has the 'use_trace_rcu == true'.
The cases that is safe for immediate reuse always have
'use_trace_rcu == false'. Instead of adding another arg
in a later patch, this patch re-purpose this arg
to reuse_now and have the test logic reversed.
In a later patch, 'reuse_now == true' will free to the
bpf_mem_cache_free() where the memory can be reused
immediately. 'reuse_now == false' will go through the
call_rcu_tasks_trace().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch remembers which smap triggers the allocation
of a 'struct bpf_local_storage' object. The local_storage is
allocated during the very first selem added to the owner.
The smap pointer is needed when using the bpf_mem_cache_free
in a later patch because it needs to free to the correct
smap's bpf_mem_alloc object.
When a selem is being removed, it needs to check if it is
the selem that triggers the creation of the local_storage.
If it is, the local_storage->smap pointer will be reset to NULL.
This NULL reset is done under the local_storage->lock in
bpf_selem_unlink_storage_nolock() when a selem is being removed.
Also note that the local_storage may not go away even
local_storage->smap is NULL because there may be other
selem still stored in the local_storage.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch first renames bpf_local_storage_unlink_nolock to
bpf_local_storage_destroy(). It better reflects that it is only
used when the storage's owner (sk/task/cgrp/inode) is being kfree().
All bpf_local_storage_destroy's caller is taking the spin lock and
then free the storage. This patch also moves these two steps into
the bpf_local_storage_destroy.
This is a preparation work for a later patch that uses
bpf_mem_cache_alloc/free in the bpf_local_storage.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
State equivalence check and checkpointing performed in is_state_visited()
employs certain heuristics to try to save memory by avoiding state checkpoints
if not enough jumps and instructions happened since last checkpoint. This leads
to unpredictability of whether a particular instruction will be checkpointed
and how regularly. While normally this is not causing much problems (except
inconveniences for predictable verifier tests, which we overcome with
BPF_F_TEST_STATE_FREQ flag), turns out it's not the case for open-coded
iterators.
Checking and saving state checkpoints at iter_next() call is crucial for fast
convergence of open-coded iterator loop logic, so we need to force it. If we
don't do that, is_state_visited() might skip saving a checkpoint, causing
unnecessarily long sequence of not checkpointed instructions and jumps, leading
to exhaustion of jump history buffer, and potentially other undesired outcomes.
It is expected that with correct open-coded iterators convergence will happen
quickly, so we don't run a risk of exhausting memory.
This patch adds, in addition to prune and jump instruction marks, also a
"forced checkpoint" mark, and makes sure that any iter_next() call instruction
is marked as such.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230310060149.625887-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement the first open-coded iterator type over a range of integers.
It's public API consists of:
- bpf_iter_num_new() constructor, which accepts [start, end) range
(that is, start is inclusive, end is exclusive).
- bpf_iter_num_next() which will keep returning read-only pointer to int
until the range is exhausted, at which point NULL will be returned.
If bpf_iter_num_next() is kept calling after this, NULL will be
persistently returned.
- bpf_iter_num_destroy() destructor, which needs to be called at some
point to clean up iterator state. BPF verifier enforces that iterator
destructor is called at some point before BPF program exits.
Note that `start = end = X` is a valid combination to setup an empty
iterator. bpf_iter_num_new() will return 0 (success) for any such
combination.
If bpf_iter_num_new() detects invalid combination of input arguments, it
returns error, resets iterator state to, effectively, empty iterator, so
any subsequent call to bpf_iter_num_next() will keep returning NULL.
BPF verifier has no knowledge that returned integers are in the
[start, end) value range, as both `start` and `end` are not statically
known and enforced: they are runtime values.
While the implementation is pretty trivial, some care needs to be taken
to avoid overflows and underflows. Subsequent selftests will validate
correctness of [start, end) semantics, especially around extremes
(INT_MIN and INT_MAX).
Similarly to bpf_loop(), we enforce that no more than BPF_MAX_LOOPS can
be specified.
bpf_iter_num_{new,next,destroy}() is a logical evolution from bounded
BPF loops and bpf_loop() helper and is the basis for implementing
ergonomic BPF loops with no statically known or verified bounds.
Subsequent patches implement bpf_for() macro, demonstrating how this can
be wrapped into something that works and feels like a normal for() loop
in C language.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Teach verifier about the concept of the open-coded (or inline) iterators.
This patch adds generic iterator loop verification logic, new STACK_ITER
stack slot type to contain iterator state, and necessary kfunc plumbing
for iterator's constructor, destructor and next methods. Next patch
implements first specific iterator (numbers iterator for implementing
for() loop logic). Such split allows to have more focused commits for
verifier logic and separate commit that we could point later to
demonstrating what does it take to add a new kind of iterator.
Each kind of iterator has its own associated struct bpf_iter_<type>,
where <type> denotes a specific type of iterator. struct bpf_iter_<type>
state is supposed to live on BPF program stack, so there will be no way
to change its size later on without breaking backwards compatibility, so
choose wisely! But given this struct is specific to a given <type> of
iterator, this allows a lot of flexibility: simple iterators could be
fine with just one stack slot (8 bytes), like numbers iterator in the
next patch, while some other more complicated iterators might need way
more to keep their iterator state. Either way, such design allows to
avoid runtime memory allocations, which otherwise would be necessary if
we fixed on-the-stack size and it turned out to be too small for a given
iterator implementation.
The way BPF verifier logic is implemented, there are no artificial
restrictions on a number of active iterators, it should work correctly
using multiple active iterators at the same time. This also means you
can have multiple nested iteration loops. struct bpf_iter_<type>
reference can be safely passed to subprograms as well.
General flow is easiest to demonstrate with a simple example using
number iterator implemented in next patch. Here's the simplest possible
loop:
struct bpf_iter_num it;
int *v;
bpf_iter_num_new(&it, 2, 5);
while ((v = bpf_iter_num_next(&it))) {
bpf_printk("X = %d", *v);
}
bpf_iter_num_destroy(&it);
Above snippet should output "X = 2", "X = 3", "X = 4". Note that 5 is
exclusive and is not returned. This matches similar APIs (e.g., slices
in Go or Rust) that implement a range of elements, where end index is
non-inclusive.
In the above example, we see a trio of function:
- constructor, bpf_iter_num_new(), which initializes iterator state
(struct bpf_iter_num it) on the stack. If any of the input arguments
are invalid, constructor should make sure to still initialize it such
that subsequent bpf_iter_num_next() calls will return NULL. I.e., on
error, return error and construct empty iterator.
- next method, bpf_iter_num_next(), which accepts pointer to iterator
state and produces an element. Next method should always return
a pointer. The contract between BPF verifier is that next method will
always eventually return NULL when elements are exhausted. Once NULL is
returned, subsequent next calls should keep returning NULL. In the
case of numbers iterator, bpf_iter_num_next() returns a pointer to an int
(storage for this integer is inside the iterator state itself),
which can be dereferenced after corresponding NULL check.
- once done with the iterator, it's mandated that user cleans up its
state with the call to destructor, bpf_iter_num_destroy() in this
case. Destructor frees up any resources and marks stack space used by
struct bpf_iter_num as usable for something else.
Any other iterator implementation will have to implement at least these
three methods. It is enforced that for any given type of iterator only
applicable constructor/destructor/next are callable. I.e., verifier
ensures you can't pass number iterator state into, say, cgroup
iterator's next method.
It is important to keep the naming pattern consistent to be able to
create generic macros to help with BPF iter usability. E.g., one
of the follow up patches adds generic bpf_for_each() macro to bpf_misc.h
in selftests, which allows to utilize iterator "trio" nicely without
having to code the above somewhat tedious loop explicitly every time.
This is enforced at kfunc registration point by one of the previous
patches in this series.
At the implementation level, iterator state tracking for verification
purposes is very similar to dynptr. We add STACK_ITER stack slot type,
reserve necessary number of slots, depending on
sizeof(struct bpf_iter_<type>), and keep track of necessary extra state
in the "main" slot, which is marked with non-zero ref_obj_id. Other
slots are also marked as STACK_ITER, but have zero ref_obj_id. This is
simpler than having a separate "is_first_slot" flag.
Another big distinction is that STACK_ITER is *always refcounted*, which
simplifies implementation without sacrificing usability. So no need for
extra "iter_id", no need to anticipate reuse of STACK_ITER slots for new
constructors, etc. Keeping it simple here.
As far as the verification logic goes, there are two extensive comments:
in process_iter_next_call() and iter_active_depths_differ() explaining
some important and sometimes subtle aspects. Please refer to them for
details.
But from 10,000-foot point of view, next methods are the points of
forking a verification state, which are conceptually similar to what
verifier is doing when validating conditional jump. We branch out at
a `call bpf_iter_<type>_next` instruction and simulate two outcomes:
NULL (iteration is done) and non-NULL (new element is returned). NULL is
simulated first and is supposed to reach exit without looping. After
that non-NULL case is validated and it either reaches exit (for trivial
examples with no real loop), or reaches another `call bpf_iter_<type>_next`
instruction with the state equivalent to already (partially) validated
one. State equivalency at that point means we technically are going to
be looping forever without "breaking out" out of established "state
envelope" (i.e., subsequent iterations don't add any new knowledge or
constraints to the verifier state, so running 1, 2, 10, or a million of
them doesn't matter). But taking into account the contract stating that
iterator next method *has to* return NULL eventually, we can conclude
that loop body is safe and will eventually terminate. Given we validated
logic outside of the loop (NULL case), and concluded that loop body is
safe (though potentially looping many times), verifier can claim safety
of the overall program logic.
The rest of the patch is necessary plumbing for state tracking, marking,
validation, and necessary further kfunc plumbing to allow implementing
iterator constructor, destructor, and next methods.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to register kfuncs that implement BPF open-coded iterator
contract and enforce naming and function proto convention. Enforcement
happens at the time of kfunc registration and significantly simplifies
the rest of iterators logic in the verifier.
More details follow in subsequent patches, but we enforce the following
conditions.
All kfuncs (constructor, next, destructor) have to be named consistenly
as bpf_iter_<type>_{new,next,destroy}(), respectively. <type> represents
iterator type, and iterator state should be represented as a matching
`struct bpf_iter_<type>` state type. Also, all iter kfuncs should have
a pointer to this `struct bpf_iter_<type>` as the very first argument.
Additionally:
- Constructor, i.e., bpf_iter_<type>_new(), can have arbitrary extra
number of arguments. Return type is not enforced either.
- Next method, i.e., bpf_iter_<type>_next(), has to return a pointer
type and should have exactly one argument: `struct bpf_iter_<type> *`
(const/volatile/restrict and typedefs are ignored).
- Destructor, i.e., bpf_iter_<type>_destroy(), should return void and
should have exactly one argument, similar to the next method.
- struct bpf_iter_<type> size is enforced to be positive and
a multiple of 8 bytes (to fit stack slots correctly).
Such strictness and consistency allows to build generic helpers
abstracting important, but boilerplate, details to be able to use
open-coded iterators effectively and ergonomically (see bpf_for_each()
in subsequent patches). It also simplifies the verifier logic in some
places. At the same time, this doesn't hurt generality of possible
iterator implementations. Win-win.
Constructor kfunc is marked with a new KF_ITER_NEW flags, next method is
marked with KF_ITER_NEXT (and should also have KF_RET_NULL, of course),
while destructor kfunc is marked as KF_ITER_DESTROY.
Additionally, we add a trivial kfunc name validation: it should be
a valid non-NULL and non-empty string.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 0091bfc817 ("io_uring/af_unix: defer registered
files gc to io_uring release") added one bit to struct sk_buff.
This structure is critical for networking, and we try very hard
to not add bloat on it, unless absolutely required.
For instance, we can use a specific destructor as a wrapper
around unix_destruct_scm(), to identify skbs that unix_gc()
has to special case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new helper is introduced to calculate xskmap memory usage.
The xfsmap memory usage can be dynamically changed when we add or remove
a xsk_map_node. Hence we need to track the count of xsk_map_node to get
its memory usage.
The result as follows,
- before
10: xskmap name count_map flags 0x0
key 4B value 4B max_entries 65536 memlock 524288B
- after
10: xskmap name count_map flags 0x0 <<< no elements case
key 4B value 4B max_entries 65536 memlock 524608B
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230305124615.12358-17-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A new helper is introduced into bpf_local_storage map to calculate the
memory usage. This helper is also used by other maps like
bpf_cgrp_storage, bpf_inode_storage, bpf_task_storage and etc.
Note that currently the dynamically allocated storage elements are not
counted in the usage, since it will take extra runtime overhead in the
elements update or delete path. So let's put it aside now, and implement
it in the future when someone really need it.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230305124615.12358-15-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit 66e3a13e7c ("bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr"),
clang builds without CONFIG_DEBUG_INFO_BTF warn:
kernel/bpf/verifier.c:10298:24: warning: array index 16 is past the end of the array (that has type 'u32[16]' (aka 'unsigned int[16]')) [-Warray-bounds]
meta.func_id == special_kfunc_list[KF_bpf_dynptr_slice_rdwr]) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/verifier.c:9150:1: note: array 'special_kfunc_list' declared here
BTF_ID_LIST(special_kfunc_list)
^
include/linux/btf_ids.h:207:27: note: expanded from macro 'BTF_ID_LIST'
#define BTF_ID_LIST(name) static u32 __maybe_unused name[16];
^
1 warning generated.
A warning of this nature was previously addressed by
commit beb3d47d1d ("bpf: Fix a BTF_ID_LIST bug with CONFIG_DEBUG_INFO_BTF not set")
but there have been new kfuncs added since then.
Quadruple the size of the CONFIG_DEBUG_INFO_BTF=n definition so that
this problem is unlikely to show up for some time.
Link: https://github.com/ClangBuiltLinux/linux/issues/1810
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230307-bpf-kfuncs-warray-bounds-v1-1-00ad3191f3a6@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-03-06
We've added 85 non-merge commits during the last 13 day(s) which contain
a total of 131 files changed, 7102 insertions(+), 1792 deletions(-).
The main changes are:
1) Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses, from Joanne Koong.
2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities,
from Andrii Nakryiko.
3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc,
from Alexei Starovoitov.
4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps, from Kumar Kartikeya Dwivedi.
5) Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them,
from Eduard Zingerman.
6) Make uprobe attachment Android APK aware by supporting attachment
to functions inside ELF objects contained in APKs via function names,
from Daniel Müller.
7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper
to start the timer with absolute expiration value instead of relative
one, from Tero Kristo.
8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id,
from Tejun Heo.
9) Extend libbpf to support users manually attaching kprobes/uprobes
in the legacy/perf/link mode, from Menglong Dong.
10) Implement workarounds in the mips BPF JIT for DADDI/R4000,
from Jiaxun Yang.
11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT,
from Hengqi Chen.
12) Extend BPF instruction set doc with describing the encoding of BPF
instructions in terms of how bytes are stored under big/little endian,
from Jose E. Marchesi.
13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui.
14) Fix bpf_xdp_query() backwards compatibility on old kernels,
from Yonghong Song.
15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS,
from Florent Revest.
16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache,
from Hou Tao.
17) Fix BPF verifier's check_subprogs to not unnecessarily mark
a subprogram with has_tail_call, from Ilya Leoshkevich.
18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode
selftests/bpf: Split test_attach_probe into multi subtests
libbpf: Add support to set kprobe/uprobe attach mode
tools/resolve_btfids: Add /libsubcmd to .gitignore
bpf: add support for fixed-size memory pointer returns for kfuncs
bpf: generalize dynptr_get_spi to be usable for iters
bpf: mark PTR_TO_MEM as non-null register type
bpf: move kfunc_call_arg_meta higher in the file
bpf: ensure that r0 is marked scratched after any function call
bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper
bpf: clean up visit_insn()'s instruction processing
selftests/bpf: adjust log_fixup's buffer size for proper truncation
bpf: honor env->test_state_freq flag in is_state_visited()
selftests/bpf: enhance align selftest's expected log matching
bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER}
bpf: improve stack slot state printing
selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access()
selftests/bpf: test if pointer type is tracked for BPF_ST_MEM
bpf: allow ctx writes using BPF_ST_MEM instruction
bpf: Use separate RCU callbacks for freeing selem
...
====================
Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin suggested that instead of using a byte in the hole (which he has
a use for in his future patch) in bpf_local_storage_elem, we can
dispatch a different call_rcu callback based on whether we need to free
special fields in bpf_local_storage_elem data. The free path, described
in commit 9db44fdd81 ("bpf: Support kptrs in local storage maps"),
only waits for call_rcu callbacks when there are special (kptrs, etc.)
fields in the map value, hence it is necessary that we only access
smap in this case.
Therefore, dispatch different RCU callbacks based on the BPF map has a
valid btf_record, which dereference and use smap's btf_record only when
it is valid.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230303141542.300068-1-memxor@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
bpf_rcu_read_lock/unlock() are only available in clang compiled kernels. Lack
of such key mechanism makes it impossible for sleepable bpf programs to use RCU
pointers.
Allow bpf_rcu_read_lock/unlock() in GCC compiled kernels (though GCC doesn't
support btf_type_tag yet) and allowlist certain field dereferences in important
data structures like tast_struct, cgroup, socket that are used by sleepable
programs either as RCU pointer or full trusted pointer (which is valid outside
of RCU CS). Use BTF_TYPE_SAFE_RCU and BTF_TYPE_SAFE_TRUSTED macros for such
tagging. They will be removed once GCC supports btf_type_tag.
With that refactor check_ptr_to_btf_access(). Make it strict in enforcing
PTR_TRUSTED and PTR_UNTRUSTED while deprecating old PTR_TO_BTF_ID without
modifier flags. There is a chance that this strict enforcement might break
existing programs (especially on GCC compiled kernels), but this cleanup has to
start sooner than later. Note PTR_TO_CTX access still yields old deprecated
PTR_TO_BTF_ID. Once it's converted to strict PTR_TRUSTED or PTR_UNTRUSTED the
kfuncs and helpers will be able to default to KF_TRUSTED_ARGS. KF_RCU will
remain as a weaker version of KF_TRUSTED_ARGS where obj refcnt could be 0.
Adjust rcu_read_lock selftest to run on gcc and clang compiled kernels.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230303041446.3630-7-alexei.starovoitov@gmail.com
The life time of certain kernel structures like 'struct cgroup' is protected by RCU.
Hence it's safe to dereference them directly from __kptr tagged pointers in bpf maps.
The resulting pointer is MEM_RCU and can be passed to kfuncs that expect KF_RCU.
Derefrence of other kptr-s returns PTR_UNTRUSTED.
For example:
struct map_value {
struct cgroup __kptr *cgrp;
};
SEC("tp_btf/cgroup_mkdir")
int BPF_PROG(test_cgrp_get_ancestors, struct cgroup *cgrp_arg, const char *path)
{
struct cgroup *cg, *cg2;
cg = bpf_cgroup_acquire(cgrp_arg); // cg is PTR_TRUSTED and ref_obj_id > 0
bpf_kptr_xchg(&v->cgrp, cg);
cg2 = v->cgrp; // This is new feature introduced by this patch.
// cg2 is PTR_MAYBE_NULL | MEM_RCU.
// When cg2 != NULL, it's a valid cgroup, but its percpu_ref could be zero
if (cg2)
bpf_cgroup_ancestor(cg2, level); // safe to do.
}
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230303041446.3630-4-alexei.starovoitov@gmail.com
