By default, a GENEVE device bind()s its underlying UDP socket(s) to
the IPv4 or IPv6 wildcard address because there is no way to specify
a specific local IP address to bind() to.
This prevents deploying multiple GENEVE devices on a multi-homed host
where each device should be isolated and bound to a different local IP
address on the same UDP port.
Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6,
to allow specifying a local IPv4/IPv6 address for the backend UDP
socket.
By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA)
is enabled, both IPv4 and IPv6 sockets are created. However, if a
source address is specified via the new attributes, only a single
socket corresponding to that specific address family is created.
Accordingly, geneve_find_sock() and geneve_find_dev() are updated to
take the source address into account, ensuring that multiple devices
and sockets configured with different source addresses can coexist
without conflict.
In addition, the source address is validated in geneve_xmit_skb()
and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key.
With this change, multiple GENEVE devices can be successfully created
and bound to their respective local IP addresses:
(*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6
# for i in $(seq 1 2);
do
ip link add geneve4_${i} type geneve local 192.168.0.${i} external
ip addr add 192.168.0.${i}/24 dev geneve4_${i}
ip link set geneve4_${i} up
ip link add geneve6_${i} type geneve local 2001:9292::${i} external
ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad
ip link set geneve6_${i} up
done
# ip -d l | grep geneve
9: geneve4_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.1 ...
10: geneve6_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::1 ...
11: geneve4_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.2 ...
12: geneve6_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::2 ...
# ss -ua | grep geneve
UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:*
UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:*
UNCONN 0 0 [2001:9292::2]:geneve *:*
UNCONN 0 0 [2001:9292::1]:geneve *:*
Note that even if the local address is explicitly configured with
the wildcard address, kernel does not dump it except for devices with
IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour
of is_tnl_info_zero(), which treats the wildcard remote address as not
configured.
## ynl example.
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do newlink --create \
--json '{"ifname": "geneve0",
"linkinfo": {"kind":"geneve",
"data": {"local": "0.0.0.0",
"collect-metadata": true}}}'
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do getlink \
--json '{"ifname": "geneve0"}' --output-json | \
jq .linkinfo.data.local
"0.0.0.0"
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
TEE fixes for v7.1
Fixing:
- params_from_user() cleanup in error path in tee_ioctl_supp_recv()
- possible tee_shm leak in error path in register_shm_helper()
- padding in struct tee_ioctl_object_invoke_arg
* tag 'tee-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the lls source files are missing SPDX-License-Identifier
lines. Add appropriate IDs to these files, and remove other license
info from the header. In once case, leave the existing id line
and just remove the license reference text.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260522225508.24006-1-tim.bird@sony.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tee_ioctl_object_invoke_arg structure has padding on some
architectures but not on x86-32 and a few others:
include/linux/tee.h:474:32: error: padding struct to align 'params' [-Werror=padded]
I expect that all current users of this are on architectures that do
have implicit padding here (arm64, arm, x86, riscv), so make the padding
explicit in order to avoid surprises if this later gets used elsewhere.
Fixes: d5b8b0fa17 ("tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add netlink attributes for controlling gratuitous ARP and unsolicited NA
forwarding when neighbor suppression is enabled.
Add IFLA_BRPORT_NEIGH_FORWARD_GRAT for port-level control and
BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT for per-VLAN control.
The new attributes provide independent control of gratuitous ARP and
unsolicited NA packets. Operators can enable forwarding for those packets
for fast mobility across VTEPs while keeping general neighbor suppression
active.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260511065936.4173106-2-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add 64-bit counters for each impairment netem applies (delay, loss,
ECN marking, corruption, duplication, reordering) and for skb
allocation failures during enqueue. Exposed through TCA_STATS_APP
as struct tc_netem_xstats.
Counters increment when an impairment is occurs, independent of later
events that may mask its on-wire effect. Added allocation_errors
(similar to sch_fq) to account for when impairment could not be
applied due to memory pressure, etc.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260509171123.307549-6-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
iproute2 can spend considerable amount of time in ll_init_map()
or ll_link_get() to dump verbose netdev attributes, contributing
to RTNL pressure.
Add RTEXT_FILTER_NAME_ONLY new flag so that rtnl_fill_ifinfo()
limits its output to:
- struct nlmsghdr
- IFLA_IFNAME
- IFLA_PROP_LIST (alternate names)
We can later avoid using RTNL when RTEXT_FILTER_NAME_ONLY
is requested, as none of these attributes need RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511070244.971028-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
Johannes Berg says:
====================
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
* tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (70 commits)
wifi: mac80211: explicitly disable FTM responder on AP stop
wifi: iwlwifi: don't blindly start the responder upon BSS_CHANGED_FTM_RESPONDER
wifi: mac80211_hwsim: claim HT STBC capability
wifi: mac80211_hwsim: enable NAN_DATA interface simulation support
wifi: mac80211_hwsim: Support Tx of multicast data on NAN
wifi: mac80211_hwsim: Do not declare support for NDPE
wifi: mac80211_hwsim: Declare support for secure NAN
wifi: mac80211_hwsim: add NAN data path TX/RX support
wifi: mac80211_hwsim: set HAS_RATE_CONTROL when using NAN
wifi: mac80211_hwsim: implement NAN schedule callbacks
wifi: mac80211_hwsim: add NAN PHY capabilities
wifi: mac80211_hwsim: add NAN_DATA interface limits
wifi: mac80211_hwsim: implement NAN synchronization
wifi: mac80211_hwsim: protect tsf_offset using a spinlock
wifi: mac80211_hwsim: only RX on NAN when active on a slot
wifi: mac80211_hwsim: select NAN TX channel based on current TSF
wifi: mac80211_hwsim: limit TX of frames to the NAN DW
wifi: cfg80211: don't allow NAN DATA on multi radio devices
wifi: mac80211: check AP using NPCA has NPCA capability
wifi: mac80211: don't parse full UHR operation from beacons
...
====================
Link: https://patch.msgid.link/20260506111147.224296-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the proximity detection (PD) interface type has no
start/stop commands defined, preventing user space from
controlling PD operations through the nl80211 interface.
Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to
allow user space to start and stop a PD interface. Add the
corresponding start_pd and stop_pd operations to cfg80211_ops
and ieee80211_ops, along with nl80211 command handlers, rdev
wrappers, and tracing support. Validate that drivers advertising
PD interface support implement the required operations. Handle
PD interface teardown during device unregistration and when
the interface leaves the network.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new wdev-only interface type NL80211_IFTYPE_PD to support
Proximity Detection (PD) operations such as PASN and peer measurement
operations. This interface type operates without a netdev, similar to
P2P_DEVICE and NAN interfaces.
Implement support across cfg80211 and mac80211 layers with PD-specific
checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag,
management frame registration and transmission capabilities, and proper
channel context handling where PD interfaces are excluded from bandwidth
calculations. Update mac80211 to recognize the new interface type in the
relevant paths for this management-only interface.
PD discovery can be performed on any available interface, such as
NL80211_IFTYPE_STATION.
If PD/PMSR uses the MAC address of an existing interface type, such as
NL80211_IFTYPE_STATION, then pairing and measurement shall use that
same interface. If PD/PMSR uses a different MAC address, such as a
random MAC address, then pairing and measurement can be performed on a
new NL80211_IFTYPE_PD interface created with that random MAC address.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com
[fix comment style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In SME-in-driver mode, the driver handles the entire (re)association
exchange. Userspace (e.g., wpa_supplicant) currently has no explicit
indication of whether the (re)association exchange was encrypted,
making it difficult to distinguish EPP (Enhanced Privacy Protection,
IEEE 802.11bi) associations from non-EPP associations.
When (Re)Association frame encryption is used, the (Re)Association
Response frame must contain a Key Delivery element as specified in
IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element
only when the (Re)Association Response frame is actually encrypted.
Processing it unconditionally for unencrypted frames leads to incorrect
behavior. Without an explicit indication from the driver, userspace
cannot determine whether encryption was used and whether the Key
Delivery element is valid.
Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a
corresponding field "assoc_encrypted" in cfg80211_connect_resp_params
to indicate that both the (Re)Association Request and Response frames
are transmitted encrypted over the air.
For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with
the assoc_encrypted field as well, which is then propagated to
cfg80211_connect_resp_params.
Pass the flag to userspace via NL80211_CMD_CONNECT event.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add pin-operstate enum and operstate_on_dpll_get callback to report
the actual hardware status of a pin with respect to its parent DPLL
device. Unlike pin-state (which reflects administrative intent set
by the user), operstate reflects what the hardware is actually doing.
Defined operational states:
- active: pin is qualified and actively used by the DPLL
- standby: pin is qualified but not actively used by the DPLL
- no-signal: pin does not have a valid signal
- qual-failed: pin signal failed qualification
The operstate is reported inside the pin-parent-device nested
attribute alongside the existing state and phase-offset attributes.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Petr Oros <poros@redhat.com>
Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Incrementally consumed buffer rings are generally fully consumed, but
it's quite possible that the application has a minimum size it needs to
meet to avoid truncation. Currently that minimum limit is 1 byte, but
this should be a setting that is the hands of the application. For
recvmsg multishot, a prime use case for incrementally consumed buffers,
the application may get spurious -EFAULT returned at the end of an
incrementally consumed buffer, as less space is available than the
headers need.
Grab a u32 field in struct io_uring_buf_reg, which the application can
use to inform the kernel of the minimum size that should be available
in an incrementally consumed buffer. If less than that is available,
the current buffer is fully processed and the next one will be picked.
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1433
Signed-off-by: Martin Michaelis <code@mgjm.de>
[axboe: write commit message, change io_buffer_list member name]
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking deletions from Jakub Kicinski:
"Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core
networking developers. syzbot loves to find bugs in BKL-era code, and
noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted. We've talked
about these deletions multiple times in the past and every time
someone wanted the code to stay. It is never very clear to me how many
of those people actually use the code vs are just nostalgic to see it
go. Amateur radio did have occasional users (or so I think) but most
users switched to user space implementations since its all super slow
stuff. Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC so
we're giving that a chance. Let's try to put the rest of this code
behind us"
* tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
drivers: net: 8390: wd80x3: Remove this driver
drivers: net: 8390: ultra: Remove this driver
drivers: net: 8390: AX88190: Remove this driver
drivers: net: fujitsu: fmvj18x: Remove this driver
drivers: net: smsc: smc91c92: Remove this driver
drivers: net: smsc: smc9194: Remove this driver
drivers: net: amd: nmclan: Remove this driver
drivers: net: amd: lance: Remove this driver
drivers: net: 3com: 3c589: Remove this driver
drivers: net: 3com: 3c574: Remove this driver
drivers: net: 3com: 3c515: Remove this driver
drivers: net: 3com: 3c509: Remove this driver
net: packetengines: remove obsolete yellowfin driver and vendor dir
net: packetengines: remove obsolete hamachi driver
net: remove unused ATM protocols and legacy ATM device drivers
net: remove ax25 and amateur radio (hamradio) subsystem
net: remove ISDN subsystem and Bluetooth CMTP
caif: remove CAIF NETWORK LAYER
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation
and all associated hamradio device drivers from the kernel tree.
This set of protocols has long been a huge bug/syzbot magnet,
and since nobody stepped up to help us deal with the influx
of the AI-generated bug reports we need to move it out of tree
to protect our sanity.
The code is moved to an out-of-tree repo:
https://github.com/linux-netdev/mod-orphan
if it's cleaned up and reworked there we can accept it back.
Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP,
AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN)
so that the conditional integration code in arp.c and tun.c continues
to compile and work when the out-of-tree modules are loaded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol
from the kernel tree.
ISDN is a pretty old technology and it's unclear whether anyone still
uses it. I went over the last few years of git history and all the
commits are either tree-wide conversions or syzbot/static analyzer
fixes.
When we discussed removal in the past IIRC there were some concerns
about ISDN still being used in parts of Germany. Unfortunately, the
code base is quite old, none of the current maintainers are familiar
with it and AI tools will have a field day finding bugs here.
Delete this code and preserve it in an out-of-tree repository
for any remaining users:
https://github.com/linux-netdev/mod-orphan
UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class
are preserved for ABI stability, but the rest of uAPI is removed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260421022108.1299678-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove CAIF (Communication CPU to Application CPU Interface), the
ST-Ericsson modem protocol. The subsystem has been orphaned since 2013.
The last meaningful changes from the maintainers were in March 2013:
a8c7687bf2 ("caif_virtio: Check that vringh_config is not null")
b2273be8d2 ("caif_virtio: Use vringh_notify_enable correctly")
0d2e1a2926 ("caif_virtio: Introduce caif over virtio")
Not-so-coincidentally, according to "the Internet" ST-Ericsson officially
shut down its modem joint venture in Aug 2013.
If anyone is using this code please yell!
In the 13 years since, the code has accumulated 200 non-merge commits,
of which 71 were cross-tree API changes, 21 carried Fixes: tags, and
the remaining ~110 were cleanups, doc conversions, treewide refactors,
and one partial removal (caif_hsi, ca75bcf0a8).
We are still getting fixes to this code, in the last 10 days there were
3 reports on security@ about CAIF that I have been CCed on.
UAPI constants (AF_CAIF, ARPHRD_CAIF, N_CAIF, VIRTIO_ID_CAIF) and the
SELinux classmap entry are intentionally kept for ABI stability.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416182829.1440262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
Pull uml updates from Johannes Berg:
"Mostly cleanups and small things, notably:
- musl libc compatibility
- vDSO installation fix
- TLB sync race fix for recent SMP support
- build fix for 32-bit with Clang 20/21"
* tag 'uml-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Disable GCOV_PROFILE_ALL on 32-bit UML with Clang 20/21
um: drivers: call kernel_strrchr() explicitly in cow_user.c
um: Replace strncpy() with strnlen()+memcpy_and_pad() in strncpy_chunk_from_user()
x86/um: fix vDSO installation
um: Remove CONFIG_FRAME_WARN from x86_64_defconfig
um: Fix pte_read() and pte_exec() for kernel mappings
um: Fix potential race condition in TLB sync
um: time-travel: clean up kernel-doc warnings
um: avoid struct sigcontext redefinition with musl
um: fix address-of CMSG_DATA() rvalue in stub
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
Pull nfsd updates from Chuck Lever:
- filehandle signing to defend against filehandle-guessing attacks
(Benjamin Coddington)
The server now appends a SipHash-2-4 MAC to each filehandle when
the new "sign_fh" export option is enabled. NFSD then verifies
filehandles received from clients against the expected MAC;
mismatches return NFS error STALE
- convert the entire NLMv4 server-side XDR layer from hand-written C to
xdrgen-generated code, spanning roughly thirty patches (Chuck Lever)
XDR functions are generally boilerplate code and are easy to get
wrong. The goals of this conversion are improved memory safety, lower
maintenance burden, and groundwork for eventual Rust code generation
for these functions.
- improve pNFS block/SCSI layout robustness with two related changes
(Dai Ngo)
SCSI persistent reservation fencing is now tracked per client and
per device via an xarray, to avoid both redundant preempt operations
on devices already fenced and a potential NFSD deadlock when all nfsd
threads are waiting for a layout return.
- scalability and infrastructure improvements
Sincere thanks to all contributors, reviewers, testers, and bug
reporters who participated in the v7.1 NFSD development cycle.
* tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (83 commits)
NFSD: Docs: clean up pnfs server timeout docs
nfsd: fix comment typo in nfsxdr
nfsd: fix comment typo in nfs3xdr
NFSD: convert callback RPC program to per-net namespace
NFSD: use per-operation statidx for callback procedures
svcrdma: Use contiguous pages for RDMA Read sink buffers
SUNRPC: Add svc_rqst_page_release() helper
SUNRPC: xdr.h: fix all kernel-doc warnings
svcrdma: Factor out WR chain linking into helper
svcrdma: Add Write chunk WRs to the RPC's Send WR chain
svcrdma: Clean up use of rdma->sc_pd->device
svcrdma: Clean up use of rdma->sc_pd->device in Receive paths
svcrdma: Add fair queuing for Send Queue access
SUNRPC: Optimize rq_respages allocation in svc_alloc_arg
SUNRPC: Track consumed rq_pages entries
svcrdma: preserve rq_next_page in svc_rdma_save_io_pages
SUNRPC: Handle NULL entries in svc_rqst_release_pages
SUNRPC: Allocate a separate Reply page array
SUNRPC: Tighten bounds checking in svc_rqst_replace_page
NFSD: Sign filehandles
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Pull tty/serial updates from Greg KH:
"Here is the set of tty and serial driver changes for 7.1-rc1.
Not much here this cycle, biggest thing is the removal of an old
driver that never got any actual hardware support (esp32), and the
second try to moving the tty ports to their own workqueues (first try
was in 7.0-rc1 but was reverted due to problems)
Otherwise it's just a small set of driver updates and some vt modifier
key enhancements.
All have been in linux-next for a while with no reported issues"
* tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits)
tty: serial: ip22zilog: Fix section mispatch warning
hvc/xen: Check console connection flag
serial: sh-sci: Add support for RZ/G3L RSCI
dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC
tty: atmel_serial: update outdated reference to atmel_tasklet_func()
serial: xilinx_uartps: Drop unused include
serial: qcom-geni: drop stray newline format specifier
serial: 8250: loongson: Enable building on MIPS Loongson64
dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible
serial: 8250_fintek: Add support for F81214E
tty: tty_port: add workqueue to flip TTY buffer
vt: support ITU-T T.416 color subparameters
serial: qcom-geni: Fix RTS behavior with flow control
tty: serial: imx: keep dma request disabled before dma transfer setup
tty: serial: 8250: Add SystemBase Multi I/O cards
serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST
serial: tegra: remove Kconfig dependency on APB DMA controller
dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9
dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart
serial: auart: check clk_enable() return in console write
...
Pull ntfs resurrection from Namjae Jeon:
"Ever since Kari Argillander’s 2022 report [1] regarding the state of
the ntfs3 driver, I have spent the last 4 years working to provide
full write support and current trends (iomap, no buffer head, folio),
enhanced performance, stable maintenance, utility support including
fsck for NTFS in Linux.
This new implementation is built upon the clean foundation of the
original read-only NTFS driver, adding:
- Write support:
Implemented full write support based on the classic read-only NTFS
driver. Added delayed allocation to improve write performance
through multi-cluster allocation and reduced fragmentation of the
cluster bitmap.
- iomap conversion:
Switched buffered IO (reads/writes), direct IO, file extent
mapping, readpages, and writepages to use iomap.
- Remove buffer_head:
Completely removed buffer_head usage by converting to folios. As a
result, the dependency on CONFIG_BUFFER_HEAD has been removed from
Kconfig.
- Stability improvements:
The new ntfs driver passes 326 xfstests, compared to 273 for ntfs3.
All tests passed by ntfs3 are a complete subset of the tests passed
by this implementation. Added support for fallocate, idmapped
mounts, permissions, and more.
xfstests Results report:
Total tests run: 787
Passed : 326
Failed : 38
Skipped : 423
Failed tests breakdown:
- 34 tests require metadata journaling
- 4 other tests:
094: No unwritten extent concept in NTFS on-disk format
563: cgroup v2 aware writeback accounting not supported
631: RENAME_WHITEOUT support required
787: NFS delegation test"
Link: https://lore.kernel.org/all/da20d32b-5185-f40b-48b8-2986922d8b25@stargateuniverse.net/ [1]
[ Let's see if this undead filesystem ends up being of the "Easter
miracle" kind, or the "Nosferatu of filesystems" kind... ]
* tag 'ntfs-for-7.1-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs: (46 commits)
ntfs: remove redundant out-of-bound checks
ntfs: add bound checking to ntfs_external_attr_find
ntfs: add bound checking to ntfs_attr_find
ntfs: fix ignoring unreachable code warnings
ntfs: fix inconsistent indenting warnings
ntfs: fix variable dereferenced before check warnings
ntfs: prefer IS_ERR_OR_NULL() over manual NULL check
ntfs: harden ntfs_listxattr against EA entries
ntfs: harden ntfs_ea_lookup against malformed EA entries
ntfs: check $EA query-length in ntfs_ea_get
ntfs: validate WSL EA payload sizes
ntfs: fix WSL ea restore condition
ntfs: add missing newlines to pr_err() messages
ntfs: fix pointer/integer casting warnings
ntfs: use ->mft_no instead of ->i_ino in prints
ntfs: change mft_no type to u64
ntfs: select FS_IOMAP in Kconfig
ntfs: add MODULE_ALIAS_FS
ntfs: reduce stack usage in ntfs_write_mft_block()
ntfs: fix sysctl table registration and path
...
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
