Every use case that needed VCAP filters (in order: DSA tag_8021q, MRP,
PTP traps) has hardcoded filter identifiers that worked well enough for
that use case alone. But when two or more of those use cases would be
used together, some of those identifiers would overlap, leading to
breakage.
Add definitions for each cookie and centralize them in ocelot_vcap.h,
such that the overlaps are more obvious.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver uses an identifier equal to (ocelot->num_phys_ports + port)
for MRP traps installed when the system is in the role of an MRC, and an
identifier equal to (port) otherwise.
Use the same identifier in both cases as a consolidation for the various
cookie values spread throughout the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
mlx5-updates-2022-02-16
Misc updates for mlx5:
1) Alex Liu Adds support for using xdp->data_meta
2) Aya Levin Adds PTP counters and port time stamp mode for representors and
switchdev mode.
3) Tariq Toukan, Striding RQ simple improvements.
4) Roi Dayan (7): Create multiple attr instances per flow
Some TC actions use post actions for their implementation.
For example CT and sample actions.
Create a new flow attr instance after each multi table action and
create a post action rule for it as a generic parsing step.
Now multi table actions like CT, sample don't require to do it.
When flow has multiple attr instances, the first flow attr is being
offloaded normally and linked to the next attr (post action rule) by
setting an id on reg_c for matching.
Post action rule (rule created from second attr instance) match the
id on reg_c and does rest of the actions.
Example rule with actions CT,goto will be created with 2 attr instances
as following: attr1(CT)->attr2(goto)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes: 04f9bf2bac ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow sample+CT actions but still block sample+CT NAT
as it is not supported.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before this commit post_act can be used for normal rules
and didn't handle special cases like CT and sample.
With this commit post_act rule can also handle the special cases
when needed.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When tc actions being parsed only the last flow attr created needs the
counter flag and the previous flags being reset.
Clean the flag from the tc action parsers.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CT and sample actions use post actions for their implementation.
Flag those actions as multi table actions so the post act infrastructure
will handle the post actions allocation.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Some TC actions use post actions for their implementation.
For example CT and sample actions.
Create a new flow attr after each multi table action and
create a post action rule for it.
First flow attr being offloaded normally and linked to the next
attr (post action rule) with setting an id on reg_c.
Post action rules match the id on reg_c and continue to the next one.
The flow counter is allocated on the last rule.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce mlx5e_tc_post_act_offload() and mlx5e_tc_post_act_unoffload()
to be able to unoffload and reoffload existing post action rules handles.
For example in neigh update events, the driver removes and readds rules in
hardware.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently the mlx5_flow object contains a single mlx5_attr instance.
However, multi table actions (e.g. CT) instantiate multiple attr instances.
Currently action_match_supported() reads the actions flag from the
flow's attribute instance. Modify the function to receive the action
flags as a parameter which is set by the calling function and
pass the aggregated actions to actions_match_supported().
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To allow shared tc block offload between two or more reps of the
same eswitch, move the tc flow hashtable to be per rep, instead
of per eswitch.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When turning on tx_port_ts (private flag) a PTP-SQ is created. Consider
this queue when adding rules matching SQs to VPORTs. Otherwise the
traffic on this queue won't reach the wire.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is a configuration where the uplink interface is the synchronizer.
Add PTP counters for this interface for monitoring.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In RQs of type multi-packet WQE (Striding RQ), each WQE is relatively
large (typically 256KB) but their number is relatively small (8 in
default).
Re-mapping the descriptors' buffers before re-posting them is done via
UMR (User-Mode Memory Registration) operations.
On the one hand, posting UMR WQEs in bulks reduces communication overhead
with the HW and better utilizes its processing units.
On the other hand, delaying the WQE repost operations for a small RQ
(say, of 4 WQEs) might drastically hit its performance, causing packet
drops due to no receive buffer, for high or bursty incoming packets rate.
Here we restrict the bulk size for too small RQs. Effectively, with the current
constants, RQ of size 4 (minimum allowed) would have no bulking, while larger
RQs will continue working with bulks of 2.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CQE compression is turned on by default on slow pci systems to help
reduce the load on pci.
In this case, Striding RQ was turned off as CQEs of packets that span
several strides were not compressed, significantly reducing the compression
effectiveness.
This issue does not exist when using the newer mini_cqe format "stride_index".
Hence, allow defaulting to Striding RQ in this case.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update the old error message for LRO state modify with the new
general name.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for using xdp->data_meta for cross-program communication
Pass "true" to the last argument of xdp_prepare_buff().
After SKB is built, call skb_metadata_set() if metadata was pushed.
Signed-off-by: Alex Liu <liualex@fb.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error
message. Fix it.
Fixes: 3b49a7edec ("net/mlx5e: TC, Reject rules with multiple CT actions")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mat Martineau says:
====================
mptcp: SO_SNDTIMEO and misc. cleanup
Patch 1 adds support for the SO_SNDTIMEO socket option on MPTCP sockets.
The remaining patches are various small cleanups:
Patch 2 removes an obsolete declaration.
Patches 3 and 5 remove unnecessary function parameters.
Patch 4 removes an extra cast.
Patches 6 and 7 add some const and ro_after_init modifiers.
Patch 8 removes extra storage of TCP helpers.
====================
Link: https://lore.kernel.org/r/20220216021130.171786-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are initialised from the init hooks, so we can't make
them 'const'. But no writes occur afterwards, so we can use ro_after_init.
Also, remove bogus EXPORT_SYMBOL, the only access comes from ip
stack, not from kernel modules.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop the unneeded type casts to 'unsigned long long' for printing out the
hmac values in add_addr_hmac_valid() and subflow_thmac_valid().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parameter 'sk' became useless since the code using it was dropped
from mptcp_get_options() in the commit 8d548ea1dd ("mptcp: do not set
unconditionally csum_reqd on incoming opt"). Let's drop it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Options parsing in now done from mptcp_incoming_options().
mptcp_parse_option() has been removed from mptcp.h when CONFIG_MPTCP is
defined but not when it is not.
Fixes: cfde141ea3 ("mptcp: move option parsing into mptcp_incoming_options()")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add setsockopt support for SO_SNDTIMEO_OLD and SO_SNDTIMEO_NEW to fix this
error reported by the mptcp bpf selftest:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
All error logs:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return from the call to dm9051_get_regs() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'ret', so making 'ret' an int.
Eliminate the following coccicheck warning:
./drivers/net/ethernet/davicom/dm9051.c:527:5-8: WARNING: Unsigned
expression compared with zero: ret < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220216014507.109117-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous bug fix had an unfortunate side effect that broke
distribution of binding table entries between nodes. The updated
tipc_sock_addr struct is also used further down in the same
function, and there the old value is still the correct one.
Fixes: 032062f363 ("tipc: fix wrong publisher node address in link publications")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220216020009.3404578-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit 59c820b231 ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Fixes: 59c820b231 ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__skb_vlan_pop() needs skb->data to point at the mac_header, while
skb_vlan_tag_present() and skb_vlan_tag_get() don't, because they don't
look at skb->data at all.
So we can avoid uselessly moving around skb->data for the case where the
VLAN tag was offloaded by the DSA master.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220215204722.2134816-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever bridge driver hits the max capacity of MDBs, it disables
the MC processing (by setting corresponding bridge option), but never
notifies switchdev about such change (the notifiers are called only upon
explicit setting of this option, through the registered netlink interface).
This could lead to situation when Software MDB processing gets disabled,
but this event never gets offloaded to the underlying Hardware.
Fix this by adding a notify message in such case.
Fixes: 147c1e9b90 ("switchdev: bridge: Offload multicast disabled")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20220215165303.31908-1-oleksandr.mazur@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When smc_connect_clc() times out, it will return -EAGAIN(tcp_recvmsg
retuns -EAGAIN while timeout), then this value will passed to the
application, which is quite confusing to the applications, makes
inconsistency with TCP.
From the manual of connect, ETIMEDOUT is more suitable, and this patch
try convert EAGAIN to ETIMEDOUT in that case.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1644913490-21594-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sysfs support might be disabled so we need to guard the code that
instantiates "compression" attribute with an #ifdef.
Fixes: b1ae6dc41e ("module: add in-kernel support for decompressing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
When commit e6ac2450d6 ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.
Fixes: c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com
Pull MMC fix from Ulf Hansson:
"Fix recovery logic for multi block I/O reads (MMC_READ_MULTIPLE_BLOCK)"
* tag 'mmc-v5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: block: fix read single on recovery logic
Mauricio Vásquez <mauricio@kinvolk.io> says:
====================
CO-RE requires to have BTF information describing the kernel types in
order to perform the relocations. This is usually provided by the kernel
itself when it's configured with CONFIG_DEBUG_INFO_BTF. However, this
configuration is not enabled in all the distributions and it's not
available on kernels before 5.12.
It's possible to use CO-RE in kernels without CONFIG_DEBUG_INFO_BTF
support by providing the BTF information from an external source.
BTFHub[0] contains BTF files to each released kernel not supporting BTF,
for the most popular distributions.
Providing this BTF file for a given kernel has some challenges:
1. Each BTF file is a few MBs big, then it's not possible to ship the
eBPF program with all the BTF files needed to run in different kernels.
(The BTF files will be in the order of GBs if you want to support a high
number of kernels)
2. Downloading the BTF file for the current kernel at runtime delays the
start of the program and it's not always possible to reach an external
host to download such a file.
Providing the BTF file with the information about all the data types of
the kernel for running an eBPF program is an overkill in many of the
cases. Usually the eBPF programs access only some kernel fields.
This series implements BTFGen support in bpftool. This idea was
discussed during the "Towards truly portable eBPF"[1] presentation at
Linux Plumbers 2021.
There is a good example[2] on how to use BTFGen and BTFHub together
to generate multiple BTF files, to each existing/supported kernel,
tailored to one application. For example: a complex bpf object might
support nearly 400 kernels by having BTF files summing only 1.5 MB.
[0]: https://github.com/aquasecurity/btfhub/
[1]: https://www.youtube.com/watch?v=igJLKyP1lFk&t=2418s
[2]: https://github.com/aquasecurity/btfhub/tree/main/tools
Changelog:
v6 > v7:
- use array instead of hashmap to store ids
- use btf__add_{struct,union}() instead of memcpy()
- don't use fixed path for testing BTF file
- update example to use DECLARE_LIBBPF_OPTS()
v5 > v6:
- use BTF structure to store used member/types instead of hashmaps
- remove support for input/output folders
- remove bpf_core_{created,free}_cand_cache()
- reorganize commits to avoid having unused static functions
- remove usage of libbpf_get_error()
- fix some errno propagation issues
- do not record full types for type-based relocations
- add support for BTF_KIND_FUNC_PROTO
- implement tests based on core_reloc ones
v4 > v5:
- move some checks before invoking prog->obj->gen_loader
- use p_info() instead of printf()
- improve command output
- fix issue with record_relo_core()
- implement bash completion
- write man page
- implement some tests
v3 > v4:
- parse BTF and BTF.ext sections in bpftool and use
bpf_core_calc_relo_insn() directly
- expose less internal details from libbpf to bpftool
- implement support for enum-based relocations
- split commits in a more granular way
v2 > v3:
- expose internal libbpf APIs to bpftool instead
- implement btfgen in bpftool
- drop btf__raw_data() from libbpf
v1 > v2:
- introduce bpf_object__prepare() and ‘record_core_relos’ to expose
CO-RE relocations instead of bpf_object__reloc_info_gen()
- rename btf__save_to_file() to btf__raw_data()
v1: https://lore.kernel.org/bpf/20211027203727.208847-1-mauricio@kinvolk.io/
v2: https://lore.kernel.org/bpf/20211116164208.164245-1-mauricio@kinvolk.io/
v3: https://lore.kernel.org/bpf/20211217185654.311609-1-mauricio@kinvolk.io/
v4: https://lore.kernel.org/bpf/20220112142709.102423-1-mauricio@kinvolk.io/
v5: https://lore.kernel.org/bpf/20220128223312.1253169-1-mauricio@kinvolk.io/
v6: https://lore.kernel.org/bpf/20220209222646.348365-1-mauricio@kinvolk.io/
Mauricio Vásquez (6):
libbpf: split bpf_core_apply_relo()
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
bpftool: Add gen min_core_btf command
bpftool: Implement "gen min_core_btf" logic
bpftool: Implement btfgen_get_btf()
selftests/bpf: Test "bpftool gen min_core_btf"
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This commit reuses the core_reloc test to check if the BTF files
generated with "bpftool gen min_core_btf" are correct. This introduces
test_core_btfgen() that runs all the core_reloc tests, but this time
the source BTF files are generated by using "bpftool gen min_core_btf".
The goal of this test is to check that the generated files are usable,
and not to check if the algorithm is creating an optimized BTF file.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-8-mauricio@kinvolk.io
Daniel Gibson reports that the n_tty code gets line termination wrong in
very specific cases:
"If you feed a line with exactly 64 chars + terminating newline, and
directly afterwards (without reading) another line into a pseudo
terminal, the the first read() on the other side will return the 64
char line *without* terminating newline, and the next read() will
return the missing terminating newline AND the complete next line (if
it fits in the buffer)"
and bisected the behavior to commit 3b830a9c34 ("tty: convert
tty_ldisc_ops 'read()' function to take a kernel pointer").
Now, digging deeper, it turns out that the behavior isn't exactly new:
what changed in commit 3b830a9c34 was that the tty line discipline
.read() function is now passed an intermediate kernel buffer rather than
the final user space buffer.
And that intermediate kernel buffer is 64 bytes in size - thus that
special case with exactly 64 bytes plus terminating newline.
The same problem did exist before, but historically the boundary was not
the 64-byte chunk, but the user-supplied buffer size, which is obviously
generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which
would hide the issue entirely).
The reason is that the n_tty canon_copy_from_read_buf() code would look
ahead for the EOL character one byte further than it would actually
copy. It would then decide that it had found the terminator, and unmark
it as an EOL character - which in turn explains why the next read
wouldn't then be terminated by it.
Now, the reason it did all this in the first place is related to some
historical and pretty obscure EOF behavior, see commit ac8f3bf883
("n_tty: Fix poll() after buffer-limited eof push read") and commit
40d5e0905a ("n_tty: Fix EOF push handling").
And the reason for the EOL confusion is that we treat EOF as a special
EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR"
in the kernel sources).
So that EOF look-ahead also affects the normal EOL handling.
This patch just removes the look-ahead that causes problems, because EOL
is much more critical than the historical "EOF in the middle of a line
that coincides with the end of the buffer" handling ever was.
Now, it is possible that we should indeed re-introduce the "look at next
character to see if it's a EOF" behavior, but if so, that should be done
not at the kernel buffer chunk boundary in canon_copy_from_read_buf(),
but at a higher level, when we run out of the user buffer.
In particular, the place to do that would be at the top of
'n_tty_read()', where we check if it's a continuation of a previously
started read, and there is no more buffer space left, we could decide to
just eat the __DISABLED_CHAR at that point.
But that would be a separate patch, because I suspect nobody actually
cares, and I'd like to get a report about it before bothering.
Fixes: 3b830a9c34 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer")
Fixes: ac8f3bf883 ("n_tty: Fix poll() after buffer-limited eof push read")
Fixes: 40d5e0905a ("n_tty: Fix EOF push handling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611
Reported-and-tested-by: Daniel Gibson <metalcaedes@gmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The last part of the BTFGen algorithm is to create a new BTF object with
all the types that were recorded in the previous steps.
This function performs two different steps:
1. Add the types to the new BTF object by using btf__add_type(). Some
special logic around struct and unions is implemented to only add the
members that are really used in the field-based relocations. The type
ID on the new and old BTF objects is stored on a map.
2. Fix all the type IDs on the new BTF object by using the IDs saved in
the previous step.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-6-mauricio@kinvolk.io
This commit implements the logic for the gen min_core_btf command.
Specifically, it implements the following functions:
- minimize_btf(): receives the path of a source and destination BTF
files and a list of BPF objects. This function records the relocations
for all objects and then generates the BTF file by calling
btfgen_get_btf() (implemented in the following commit).
- btfgen_record_obj(): loads the BTF and BTF.ext sections of the BPF
objects and loops through all CO-RE relocations. It uses
bpf_core_calc_relo_insn() from libbpf and passes the target spec to
btfgen_record_reloc(), that calls one of the following functions
depending on the relocation kind.
- btfgen_record_field_relo(): uses the target specification to mark all
the types that are involved in a field-based CO-RE relocation. In this
case types resolved and marked recursively using btfgen_mark_type().
Only the struct and union members (and their types) involved in the
relocation are marked to optimize the size of the generated BTF file.
- btfgen_record_type_relo(): marks the types involved in a type-based
CO-RE relocation. In this case no members for the struct and union types
are marked as libbpf doesn't use them while performing this kind of
relocation. Pointed types are marked as they are used by libbpf in this
case.
- btfgen_record_enumval_relo(): marks the whole enum type for enum-based
relocations.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-5-mauricio@kinvolk.io
