Add tests to local_termination.sh to verify that link-local frames
arrive. On some switches the DSA driver uses bridges to connect the
user ports to their CPU ports. More "intelligent" switches typically
don't forward link-local frames, but may trap them to an internal
microcontroller. The driver may have to change trapping rules, so
link-local frames end up on the DSA CPU ports instead of being
silently dropped or trapped to the internal microcontroller of the
switch.
Add two tests which help to validate this has been done correctly:
- Link-local STP BPDU should arrive at the Linux netdev when the
bridge has STP disabled (BR_NO_STP), in which case the bridge
forwards them rather than consuming them in the control plane
- Link-local LLDP should arrive at standalone ports (and the test
should be skipped on bridged ports similar to how it is done
for the IEEE1588v2/PTP tests)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/1a67081b2ede1e6d2d32f7dd54ae9688f3566152.1773166131.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The format of Netlink policy dump is a bit curious with messages
in the same dump carrying both attrs and mapping info. Plus each
message carries a single piece of the puzzle the caller must then
reassemble.
I need to do this reassembly for a test, but I think it's generally
useful. So let's add proper support to YnlFamily to return more
user-friendly representation. See the various docs in the patch
for more details.
Link: https://patch.msgid.link/20260310005337.3594225-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test generates 16 flows, and verifies that traffic is distributed
across two queues via the NICs RSS indirection table. The likelihood of the
flows skewing to a single queue is high, so we retry sending traffic up to
3 times.
Alternatively, we could increase the number of generated flows. But
debug kernels may struggle to ramp this many flows.
During manual testing, the test passed for 10,000 consecutive runs.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260309204215.2110486-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/rds/test.py sees a segfault in tcpdump when executed through the
ksft runner.
[ 21.903713] tcpdump[1469]: segfault at 0 ip 000072100e99126d
sp 00007ffccf740fd0 error 4
[ 21.903721] in libc.so.6[16a26d,7798b149a000+188000]
[ 21.905074] in libc.so.6[16a26d,72100e84f000+188000] likely on
CPU 5 (core 5, socket 0)
[ 21.905084] Code: 00 0f 85 a0 00 00 00 48 83 c4 38 89 d8 5b 41 5c
41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 48 8b 05 91 8b 09 00 8b 4d ac
64 89 08 <41> 0f b6 07 83 e8 2b a8 fd 0f 84 54 ff ff ff 49 8b 36 4c 89
ff e8
[ 21.906760] likely on CPU 9 (core 9, socket 0)
[ 21.913469] Code: 00 0f 85 a0 00 00 00 48 83 c4 38 89 d8 5b 41 5c 41
5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 48 8b 05 91 8b 09 00 8b 4d ac 64 89
08 <41> 0f b6 07 83 e8 2b a8 fd 0f 84 54 ff ff ff 49 8b 36 4c 89 ff e8
The os.fork() call creates extra complexity because it forks the entire
process including the python interpreter. ip() then calls cmd() which
creates a subprocess.Popen. We can avoid the extra layering by simply
calling subprocess.Popen directly. Track the process handles directly
and terminate them at cleanup rather than relying on killall. Further
tcpdump's -Z flag attempts to change savefile ownership, which is not
supported by the 9p protocol. Fix this by writing pcap captures to
"/tmp" during the test and move them to the log directory after tcpdump
exits.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260308055835.1338257-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_nexthop() retrieves the link-local address for two interfaces used
in the test. However, both lldummy and llv1 are obtained from dummy0.
llv1 is expected to be retrieved from veth1, which is the interface used
later in the test. The subsequent check and error message also expect
the address to be retrieved from veth1.
Fix this by retrieving llv1 from veth1.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260306180830.2329477-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu.sh kselftest configures OVS using ovs-dpctl.py and falls back
to ovs-vsctl only when ovs-dpctl.py fails. However, ovs-dpctl.py exits
with a success status when the installed pyroute2 package version is
lower than 0.6, even though the OVS datapath is not configured.
As a result, pmtu.sh assumes that the setup was successful and
continues running the test, which later fails due to the missing
OVS configuration.
Fix the exit code handling in ovs-dpctl.py so that pmtu.sh can detect
that the setup did not complete successfully and fall back to
ovs-vsctl.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260306000127.519064-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several forwarding tests (e.g., gre_multipath.sh) initialize both IPv4
and IPv6 addresses using simple_if_init, but only clean up IPv4
in simple_if_fini. This leaves stale IPv6 addresses on the interfaces,
which causes subsequent tests to fail when they encounter unexpected
address configuration.
The issue can be reproduced by running tests in sequence:
# run_kselftest.sh -t net/forwarding:ipip_hier_gre.sh
# run_kselftest.sh -t net/forwarding:min_max_mtu.sh
TAP version 13
1..1
# timeout set to 0
# selftests: net/forwarding: min_max_mtu.sh
# TEST: ping [ OK ]
# TEST: ping6 [ OK ]
# TEST: Test maximum MTU configuration [ OK ]
# TEST: Test traffic, packet size is maximum MTU [FAIL]
# Ping6, packet size: 65487 succeeded, but should have failed
# TEST: Test minimum MTU configuration [ OK ]
# TEST: Test traffic, packet size is minimum MTU [ OK ]
not ok 1 selftests: net/forwarding: min_max_mtu.sh # exit=1
Fix this by removing the unused IPv6 argument from simple_if_init in
tests that don't use IPv6 (gre_multipath.sh, ipip_lib.sh), and by
adding the missing IPv6 argument to simple_if_fini in tests that
use IPv6 (gre_multipath_nh.sh, gre_multipath_nh_res.sh).
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260305211000.515301-1-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The large chunks test does a probe run of iou-zcrx before it runs the
actual test. After the probe run finishes, the context will still exist
until the deferred io_uring teardown. When running iou-zcrx the second
time, io_uring_register_ifq() can return -EEXIST due to the existence of
the old context.
The fix is simple: wait for the context teardown using the new
mp_clear_wait() utility before running the second instance of iou-zcrx.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260305080446.897628-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260305181803.2912736-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Add a regression test for a kernel panic that occurs when an IPv4 route
references an IPv6 nexthop object created on the loopback device.
The test creates an IPv6 nexthop on lo, binds an IPv4 route to it, then
triggers a route lookup via ping to verify the kernel does not crash.
./fib_nexthops.sh
Tests passed: 249
Tests failed: 0
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tun UDP tunnel GSO fixture contains XFAIL-marked variants intended to
exercise failure paths (e.g. EMSGSIZE / "Message too long").
Using ASSERT_EQ() in these tests aborts the subtest, which prevents the
harness from classifying them as XFAIL and can make the overall net: tun
test fail.
Switch the relevant ASSERT_EQ() checks to EXPECT_EQ() so the subtests
continue running and the failures are correctly reported and accounted
as XFAIL where applicable.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TEST_F() allocates and registers its struct __test_metadata via mmap()
inside its constructor, and only then assigns the
_##fixture_##test##_object pointer.
XFAIL_ADD() runs in a constructor too and reads
_##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs
first, xfail->test can be NULL and the expected failure will be reported
as FAIL.
Use constructor priorities to ensure TEST_F registration runs before
XFAIL_ADD, without adding extra state or runtime lookups.
Fixes: 2709473c93 ("selftests: kselftest_harness: support using xfail")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: endpoints with both the signal and
subflow flags should always be marked as used even if it was not
possible to create new subflows due to the MPTCP PM limits.
For this test, an extra endpoint is created with both the signal and the
subflow flags, and limits are set not to create extra subflows. In this
case, an ADD_ADDR is sent, but no subflows are created. Still, the local
endpoint is marked as used, and no warning is fired when removing the
endpoint, after having sent a RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 85df533a78 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: RM_ADDR were sent over the first
found active subflow which could be the same as the one being removed.
It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them
over the initial subflow, when removing the endpoint attached to it. If
it is dropped, the test will complain because some RM_ADDR have not been
received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to
be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte
code is used. If the IPTables commands fail, that's OK, the tests will
continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as
skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 8dd5efb1f9 ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
list_categories() builds a set directly from the 'category'
field of each test case. Since 'category' is a list,
set(map(...)) attempts to insert lists into a set, which
raises:
TypeError: unhashable type: 'list'
Flatten category lists and collect unique category names
using set.update() instead.
Signed-off-by: Naveen Anandhan <mr.navi8680@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest that verifies multicast delivery to a macvlan bridge
port when the source MAC of the incoming frame matches the macvlan's
own MAC address.
This scenario occurs with protocols like VRRP where multiple hosts
share the same virtual MAC address. Without the corresponding kernel
change, macvlan bridge mode does not handle this case and the
multicast frame is not delivered.
Signed-off-by: Kibaek Yoo <psykibaek@gmail.com>
Link: https://patch.msgid.link/20260228071613.4360-2-psykibaek@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The script uses set -euo pipefail, so when busywait times out waiting
for the netconsole message to arrive, it returns 1 and the script exits
immediately without printing any error message. As reported by Jakub,
this makes failures hard to diagnose since the test reports exit=1 with
no explanation.
Handle the busywait failure explicitly so that a FAIL message is printed
before exiting. This is how it looks like now:
Running with target mode: basic (ipv6)
[ 167.452561] netconsole selftest: netcons_QdMay
FAIL: Timed out waiting (20000 ms) for netconsole message in /tmp/netcons_QdMay
The remaining silent failures under set -e can only happen during the
setup phase (netdevsim creation, interface configuration, configfs
writes). So, it is not expected to have any silent failure once the test
starts.
Note that this issue might be less frequent now, since commit
a68a9bd086 ("selftests: netconsole: Increase port listening timeout")
increased the timeout that _might_ have been the root cause of these
random failures in NIPA.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260302-netconsole_test_verbose-v1-1-b1be5d30cd7d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull cgroup fixes from Tejun Heo:
- Fix circular locking dependency in cpuset partition code by
deferring housekeeping_update() calls to a workqueue instead
of calling them directly under cpus_read_lock
- Fix null-ptr-deref in rebuild_sched_domains_cpuslocked() when
generate_sched_domains() returns NULL due to kmalloc failure
- Fix incorrect cpuset behavior for effective_xcpus in
partition_xcpus_del() and cpuset_update_tasks_cpumask()
in update_cpumasks_hier()
- Fix race between task migration and cgroup iteration
* tag 'cgroup-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix null-ptr-deref in rebuild_sched_domains_cpuslocked
cgroup/cpuset: Call housekeeping_update() without holding cpus_read_lock
cgroup/cpuset: Defer housekeeping_update() calls from CPU hotplug to workqueue
cgroup/cpuset: Move housekeeping_update()/rebuild_sched_domains() together
kselftest/cgroup: Simplify test_cpuset_prs.sh by removing "S+" command
cgroup/cpuset: Set isolated_cpus_updating only if isolated_cpus is changed
cgroup/cpuset: Clarify exclusion rules for cpuset internal variables
cgroup/cpuset: Fix incorrect use of cpuset_update_tasks_cpumask() in update_cpumasks_hier()
cgroup/cpuset: Fix incorrect change to effective_xcpus in partition_xcpus_del()
cgroup: fix race between task migration and iteration
Pull sched_ext fixes from Tejun Heo:
- Fix starvation of scx_enable() under fair-class saturation by
offloading the enable path to an RT kthread
- Fix out-of-bounds access in idle mask initialization on systems with
non-contiguous NUMA node IDs
- Fix a preemption window during scheduler exit and a refcount
underflow in cgroup init error path
- Fix SCX_EFLAG_INITIALIZED being a no-op flag
- Add READ_ONCE() annotations for KCSAN-clean lockless accesses and
replace naked scx_root dereferences with container_of() in kobject
callbacks
- Tooling and selftest fixes: compilation issues with clang 17,
strtoul() misuse, unused options cleanup, and Kconfig sync
* tag 'sched_ext-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
sched_ext: Remove redundant css_put() in scx_cgroup_init()
selftests/sched_ext: Fix peek_dsq.bpf.c compile error for clang 17
selftests/sched_ext: Add -fms-extensions to bpf build flags
tools/sched_ext: Add -fms-extensions to bpf build flags
sched_ext: Use READ_ONCE() for plain reads of scx_watchdog_timeout
sched_ext: Replace naked scx_root dereferences in kobject callbacks
sched_ext: Use READ_ONCE() for the read side of dsq->nr update
tools/sched_ext: fix strtoul() misuse in scx_hotplug_seq()
sched_ext: Fix SCX_EFLAG_INITIALIZED being a no-op flag
sched_ext: Fix out-of-bounds access in scx_idle_init_masks()
sched_ext: Disable preemption between scx_claim_exit() and kicking helper work
tools/sched_ext: Add Kconfig to sync with upstream
tools/sched_ext: Sync README.md Kconfig with upstream scx
selftests/sched_ext: Remove duplicated unistd.h include in rt_stall.c
tools/sched_ext: scx_sdt: Remove unused '-f' option
tools/sched_ext: scx_central: Remove unused '-p' option
selftests/sched_ext: Fix unused-result warning for read()
selftests/sched_ext: Abort test loop on signal
Add a selftest to verify that changing xmit_hash_policy to vlan+srcmac
is rejected when a native XDP program is loaded on a bond in 802.3ad
mode. Without the fix in bond_option_xmit_hash_policy_set(), the change
succeeds silently, creating an inconsistent state that triggers a kernel
WARNING in dev_xdp_uninstall() when the bond is torn down.
The test attaches native XDP to a bond0 (802.3ad, layer2+3), then
attempts to switch xmit_hash_policy to vlan+srcmac and asserts the
operation fails. It also verifies the change succeeds after XDP is
detached, confirming the rejection is specific to the XDP-loaded state.
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When compiling sched_ext selftests using clang 17.0.6, it raised
compiler crash and build error:
Error at line 68: Unsupport signed division for DAG: 0x55b2f9a60240:
i64 = sdiv 0x55b2f9a609b0, Constant:i64<100>, peek_dsq.bpf.c:68:25 @[
peek_dsq.bpf.c:95:4 @[ peek_dsq.bpf.c:169:8 @[ peek
_dsq.bpf.c:140:6 ] ] ]Please convert to unsigned div/mod
After digging, it's not a compiler error, clang supported Signed division
only when using -mcpu=v4, while we use -mcpu=v3 currently, the better way
is to use unsigned div, see [1] for details.
[1] https://github.com/llvm/llvm-project/issues/70433
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Similar to commit 835a507535 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f4 ("bpftool: Fix build warnings
due to MS extensions")
Fix "declaration does not declare anything" warning by using
-fms-extensions and -Wno-microsoft-anon-tag flags to build bpf programs
that #include "vmlinux.h"
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The new test exercise paths, where RTNL is needed, to
catch lockdep splat:
setsockopt
MRT_INIT / MRT_DONE
MRT_ADD_VIF / MRT_DEL_VIF
MRT_ADD_MFC / MRT_DEL_MFC / MRT_ADD_MFC_PROXY / MRT_DEL_MFC_PROXY
MRT_TABLE
MRT_FLUSH
rtnetlink
RTM_NEWROUTE
RTM_DELROUTE
NETDEV_UNREGISTER
I will extend this to cover IPv6 setsockopt() later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260228221800.1082070-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1cc93c48b5 ("selftests/net: packetdrill: remove tests for
tcp_rcv_*big") removed the test for the reverted commit 1d2fbaad7c
("tcp: stronger sk_rcvbuf checks") but also the one for commit
9ca48d616e ("tcp: do not accept packets beyond window").
Restore the test with the necessary adaptation: expect a delayed ACK
instead of an immediate one, since tcp_can_ingest() does not fail
anymore for the last data packet.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260301-tcp_rcv_big_endseq-v1-1-86ab7415ab58@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The large chunks test needs 2MB hugepages for its mmap allocation,
but the test system may not have any pre-allocated. Ensure at least
64 hugepages are available before running the test, and restore the
original value on cleanup.
While at it strip the stdout, it has a trailing new line.
Before: ok 5 iou-zcrx.test_zcrx_large_chunks # SKIP Can't allocate huge pages
Link: https://patch.msgid.link/20260227171305.2848240-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a32bb32d01 ("selftests: iou-zcrx: test large chunk sizes")
and commit de7c600e2d ("selftests/net: parametrise iou-zcrx.py with
ksft_variants") landed at similar time. The large chunks test was
actually not included in the list of tests, so it never run.
We haven't noticed that it uses the old-style helpers
(_get_combined_channels, _get_current_settings, _set_flow_rule)
that were removed by the other commit.
Rework test_zcrx_large_chunks to reuse the single() setup function
and add it to the ksft_run cases list so it actually gets executed.
Link: https://patch.msgid.link/20260227171305.2848240-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
io_uring defers zcrx context teardown to the iou_exit workqueue.
# ps aux | grep iou
... 07:58 0:00 [kworker/u19:0-iou_exit]
... 07:58 0:00 [kworker/u18:2-iou_exit]
When the test's receiver process exits, bkg() returns but the memory
provider may still be attached to the rx queue. The subsequent defer()
that restores tcp-data-split then fails:
# Exception while handling defer / cleanup (callback 3 of 3)!
# Defer Exception| net.ynl.pyynl.lib.ynl.NlError:
Netlink error: can't disable tcp-data-split while device has
memory provider enabled: Invalid argument
not ok 1 iou-zcrx.test_zcrx.single
Add a helper that polls netdev queue-get until no rx queue reports
the io-uring memory provider attribute. Register it as a defer()
just before tcp-data-split is restored as a "barrier".
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260227171305.2848240-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix alignment of arm64 JIT buffer to prevent atomic tearing (Fuad
Tabba)
- Fix invariant violation for single value tnums in the verifier
(Harishankar Vishwanathan, Paul Chaignon)
- Fix a bunch of issues found by ASAN in selftests/bpf (Ihor Solodrai)
- Fix race in devmpa and cpumap on PREEMPT_RT (Jiayuan Chen)
- Fix show_fdinfo of kprobe_multi when cookies are not present (Jiri
Olsa)
- Fix race in freeing special fields in BPF maps to prevent memory
leaks (Kumar Kartikeya Dwivedi)
- Fix OOB read in dmabuf_collector (T.J. Mercier)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (36 commits)
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
selftests/bpf: Fix OOB read in dmabuf_collector
selftests/bpf: Fix a memory leak in xdp_flowtable test
bpf: Fix stack-out-of-bounds write in devmap
bpf: Fix kprobe_multi cookies access in show_fdinfo callback
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
selftests/bpf: Don't override SIGSEGV handler with ASAN
selftests/bpf: Check BPFTOOL env var in detect_bpftool_path()
selftests/bpf: Fix out-of-bounds array access bugs reported by ASAN
selftests/bpf: Fix array bounds warning in jit_disasm_helpers
...
Jakub reports test flakes on debug kernels:
FAIL: test_udp_gro_ct: Expected software segmentation to occur, had 23 and 17
This test assumes that the kernels nfnetlink_queue module sees N GSO
packets, segments them into M skbs and queues them to userspace for
reinjection.
Hence, if M >= N, no segmentation occurred.
However, its possible that this happens:
- nfnetlink_queue gets GSO packet
- segments that into n skbs
- userspace buffer is full, kernel drops the segmented skbs
-> "toqueue" counter incremented by 1, "fromqueue" is unchanged.
If this happens often enough in a single run, M >= N check triggers
incorrectly.
To solve this, allow the nf_queue.c test program to set the FAIL_OPEN
flag so that the segmented skbs bypass the queueing step in the kernel
if the receive buffer is full.
Also, reduce number of sending socat instances, decrease their priority
and increase nice value for the nf_queue program itself to reduce the
probability of overruns happening in the first place.
Fixes: 59ecffa399 ("selftests: netfilter: nft_queue.sh: add udp fraglist gro test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260218184114.0b405b72@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260226161920.1205-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reg_bounds_crafted tests validate the verifier's range analysis
logic. They focus on the actual ranges and thus ignore the tnum. As a
consequence, they carry the assumption that the tested cases can be
reproduced in userspace without using the tnum information.
Unfortunately, the previous change the refinement logic breaks that
assumption for one test case:
(u64)2147483648 (u32)<op> [4294967294; 0x100000000]
The tested bytecode is shown below. Without our previous improvement, on
the false branch of the condition, R7 is only known to have u64 range
[0xfffffffe; 0x100000000]. With our improvement, and using the tnum
information, we can deduce that R7 equals 0x100000000.
19: (bc) w0 = w6 ; R6=0x80000000
20: (bc) w0 = w7 ; R7=scalar(smin=umin=0xfffffffe,smax=umax=0x100000000,smin32=-2,smax32=0,var_off=(0x0; 0x1ffffffff))
21: (be) if w6 <= w7 goto pc+3 ; R6=0x80000000 R7=0x100000000
R7's tnum is (0; 0x1ffffffff). On the false branch, regs_refine_cond_op
refines R7's u32 range to [0; 0x7fffffff]. Then, __reg32_deduce_bounds
refines the s32 range to 0 using u32 and finally also sets u32=0.
From this, __reg_bound_offset improves the tnum to (0; 0x100000000).
Finally, our previous patch uses this new tnum to deduce that it only
intersect with u64=[0xfffffffe; 0x100000000] in a single value:
0x100000000.
Because the verifier uses the tnum to reach this constant value, the
selftest is unable to reproduce it by only simulating ranges. The
solution implemented in this patch is to change the test case such that
there is more than one overlap value between u64 and the tnum. The max.
u64 value is thus changed from 0x100000000 to 0x300000000.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/50641c6a7ef39520595dcafa605692427c1006ec.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch introduces selftests to cover the new bounds refinement
logic introduced in the previous patch. Without the previous patch,
the first two tests fail because of the invariant violation they
trigger. The last test fails because the R10 access is not detected as
dead code. In addition, all three tests fail because of R0 having a
non-constant value in the verifier logs.
In addition, the last two cases are covering the negative cases: when we
shouldn't refine the bounds because the u64 and tnum overlap in at least
two values.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/90d880c8cf587b9f7dc715d8961cd1b8111d01a8.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a couple of tests to ensure that the refcount drops to zero when we
exercise the race where creation of a special field succeeds the logical
bpf_obj_free_fields done when deleting an element. Prior to previous
changes, the fields would be freed eagerly and repopulate and end up
leaking, causing the reference to not drop down correctly. Running this
test on a kernel without fixes will cause a hang in delete_module, since
the module reference stays active due to the leaked kptr not dropping
it. After the fixes tests succeed as expected.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull arm64 fixes from Will Deacon:
"The diffstat is dominated by changes to our TLB invalidation errata
handling and the introduction of a new GCS selftest to catch one of
the issues that is fixed here relating to PROT_NONE mappings.
- Fix cpufreq warning due to attempting a cross-call with interrupts
masked when reading local AMU counters
- Fix DEBUG_PREEMPT warning from the delay loop when it tries to
access per-cpu errata workaround state for the virtual counter
- Re-jig and optimise our TLB invalidation errata workarounds in
preparation for more hardware brokenness
- Fix GCS mappings to interact properly with PROT_NONE and to avoid
corrupting the pte on CPUs with FEAT_LPA2
- Fix ioremap_prot() to extract only the memory attributes from the
user pte and ignore all the other 'prot' bits"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: topology: Fix false warning in counters_read_on_cpu() for same-CPU reads
arm64: Fix sampling the "stable" virtual counter in preemptible section
arm64: tlb: Optimize ARM64_WORKAROUND_REPEAT_TLBI
arm64: tlb: Allow XZR argument to TLBI ops
kselftest: arm64: Check access to GCS after mprotect(PROT_NONE)
arm64: gcs: Honour mprotect(PROT_NONE) on shadow stack mappings
arm64: gcs: Do not set PTE_SHARED on GCS mappings if FEAT_LPA2 is enabled
arm64: io: Extract user memory type in ioremap_prot()
arm64: io: Rename ioremap_prot() to __ioremap_prot()
